This dma_memory_read was giving too big a size when begin was non-zero.
This could cause segfaults in some circumstances. Fix.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add some spacing and zeros to make it easier to read and
modify the map. This patch has no functional changes. The
review looks ugly, but it's actually pretty easy to confirm
all the addresses are as they should be - thanks to the new
formatting ;-)
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The code in do_cpu_reset() correctly handled AArch64 CPUs
when running Linux kernels, but was missing code in the
branch of the if() that deals with loading ELF files.
Correctly jump to the ELF entry point on reset rather than
leaving the reset PC at zero.
Reported-by: Christopher Covington <cov@codeaurora.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Christopher Covington <cov@codeaurora.org>
Cc: qemu-stable@nongnu.org
Under recommendation from Luiz Capitulino, we are changing
the error_set calls to error_setg while we are fixing up
the error handling pathways of virtio-rng.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
This patch pushes the error-checking forward and the virtio
initialization backward in the device realization function
in order to prevent memory leaks for hot plug scenarios.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
qemu side patch to support xen HVM direct kernel boot:
if -kernel exists, calls xen_load_linux(), which will read kernel/initrd
and add a linuxboot.bin or multiboot.bin option rom. The
linuxboot.bin/multiboot.bin will load kernel/initrd and jump to execute
kernel directly. It's working when xen uses seabios.
During this work, found the 'kvmvapic' is in option_rom list, it should
not be there in xen case. Set s->vapic_control = 0 in xen_apic_realize()
to handle that.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
pl031's base address should be 0x9010000, not 0x90010000, otherwise
it sits in ram when configuring a guest with greater than 1G.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- Tweak error message for legacy machine type:
Basically if table size exceeds the limits we set all
bets are off for migration: e.g. it can start failing even
within given qemu minor version simply because of a bugfix.
- Increase table size to 128k.
- Make sure we notice it long before we start getting close to the
128k limit: warn at 64k.
- Don't fail if we exceed the limit: most people don't care about
migration, even less people care about cross version miration.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
This patch avoids that similar changes break QEMU again in the future.
QEMU will now hard-code 64k as the maximum ACPI table size, which
(despite being an order of magnitude smaller than 640k) should be enough
for everyone.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes migration regression from QEMU-1.7 to a newer QEMUs.
SSDT table size in QEMU-1.7 doesn't change regardless of
a number of PCI bridge devices present at startup.
However in QEMU-2.0 since addition of hotplug on PCI bridges,
each PCI bridge adds ~1875 bytes to SSDT table, including
pc-i440fx-1.7 machine type where PCI bridge hotplug disabled
via compat property.
It breaks migration from "QEMU-1.7" to "QEMU-2.[01] -M pc-i440fx-1.7"
since RAMBlock size of ACPI tables on target becomes larger
then on source and migration fails with:
"Length mismatch: /rom@etc/acpi/tables: 2000 in != 3000"
error.
Fix this by generating AML only for PCI0 bus if
hotplug on PCI bridges is disabled and preserves PCI brigde
description in AML as it was done in QEMU-1.7 for pc-i440fx-1.7.
It will help to maintain size of SSDT static regardless of
number of PCI bridges on startup for pc-i440fx-1.7 machine type.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Changing the ACPI table size causes migration to break, and the memory
hotplug work opened our eyes on how horribly we were breaking things in
2.0 already.
The ACPI table size is rounded to the next 4k, which one would think
gives some headroom. In practice this is not the case, because the user
can control the ACPI table size (each CPU adds 97 bytes to the SSDT and
8 to the MADT) and so some "-smp" values will break the 4k boundary and
fail to migrate. Similarly, PCI bridges add ~1870 bytes to the SSDT.
This patch concerns itself with fixing migration from QEMU 2.0. It
computes the payload size of QEMU 2.0 and always uses that one.
The previous patch shrunk the ACPI tables enough that the QEMU 2.0 size
should always be enough; non-AML tables can change depending on the
configuration (especially MADT, SRAT, HPET) but they remain the same
between QEMU 2.0 and 2.1, so we only compute our padding based on the
sizes of the SSDT and DSDT.
Migration from QEMU 1.7 should work for guests that have a number of CPUs
other than 12, 13, 14, 54, 55, 56, 97, 98, 139, 140. It was already
broken from QEMU 1.7 to QEMU 2.0 in the same way, though.
Even with this patch, QEMU 1.7 and 2.0 have two different ideas of
"-M pc-i440fx-2.0" when there are PCI bridges. Igor sent a patch to
adopt the QEMU 1.7 definition. I think distributions should apply
it if they move directly from QEMU 1.7 to 2.1+ without ever packaging
version 2.0.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This replaces the _PRT constant with a method that computes it.
The problem is that the DSDT+SSDT have grown from 2.0 to 2.1,
enough to cross the 8k barrier (we align the ACPI tables to 4k
before putting them in fw_cfg). This causes problems with
migration and the pc-i440fx-2.0 machine type.
The solution to the problem is to hardcode 64k as the limit,
but this doesn't solve the bug with pc-i440fx-2.0. The fix will be
for QEMU 2.1 to use exactly the same size as QEMU 2.0 for the
ACPI tables. First, however, we must make the actual AML
equal or smaller; to do this, rewrite _PRT in a way that saves
over 1k of bytecode.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reason: we don't want commit to that interface yet. Possibly
the implementation will be switched over to use fsdev.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The VMStateDescription for the imx_ccm device was missing its
terminator. Found by static search of the codebase using
a regex based on one suggested by Ian Jackson:
pcregrep -rMi '(?s)VMStateField(?:(?!END_OF_LIST).)*?;' $(git grep -l 'VMStateField\[\]')
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-stable@nongnu.org
"vmstate_xhci_event" was introduced in commit 37352df3 ("xhci: add live
migration support"), and first released in v1.6.0. The field list in this
VMSD is not terminated with the VMSTATE_END_OF_LIST() macro.
During normal use (ie. migration), the issue is practically invisible,
because the "vmstate_xhci_event" object (with the unterminated field list)
is only ever referenced -- via "vmstate_xhci_intr" -- if xhci_er_full()
returns true, for the "ev_buffer" test. Since that field_exists() check
(apparently) almost always returns false, we almost never traverse
"vmstate_xhci_event" during migration, which hides the bug.
However, Amit's vmstate checker forces recursion into this VMSD as well,
and the lack of VMSTATE_END_OF_LIST() breaks the field list terminator
check (field->name != NULL) in dump_vmstate_vmsd(). The result is
undefined behavior, which in my case translates to infinite recursion
(because the loop happens to overflow into "vmstate_xhci_intr", which then
links back to "vmstate_xhci_event").
Add the missing terminator.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Only a single bug fix to make -mem-path only affect RAM regions.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=KL8S
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/agraf/tags/signed-ppc-for-upstream' into staging
Patch queue for ppc - 2014-07-22
Only a single bug fix to make -mem-path only affect RAM regions.
# gpg: Signature made Tue 22 Jul 2014 16:38:04 BST using RSA key ID 03FEDC60
# gpg: Can't check signature: public key not found
* remotes/agraf/tags/signed-ppc-for-upstream:
ppc: fix -mem-path failure
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
commit e938ba0c tried to enable -mem-path for ppc but breaked some ppc
boards.
The problems are:
1. it fails when allocating memory for rom, sram whose sizes are less
than huge page size:
./ppc-softmmu/qemu-system-ppc -m 512 -mem-path /hugepages/ \
-kernel /home/hutao/Downloads/vmlinux-ppc -initrd \
/home/hutao/Downloads/initrd-ppc.gz
qemu-system-ppc: /mnt/data/projects/qemu/exec.c:1184: qemu_ram_set_idstr: Assertion `new_block' failed.
2. if there is a numa node backed by memory backend object, qemu fails
with message:
./ppc-softmmu/qemu-system-ppc -m 512 \
-object memory-backend-file,size=512M,mem-path=/hugepages,id=f0 \
-numa node,nodeid=0,memdev=f0 \
-kernel /home/hutao/Downloads/vmlinux-ppc \
-initrd /home/hutao/Downloads/initrd-ppc.gz
qemu-system-ppc: memory backend f0 is used multiple times. Each -numa option must use a different memdev value.
This patch does following:
1. replaces memory_region_allocate_system_memory() with
memory_region_init_ram() for rom, sram. Then only system memory
is backed by hugepages when specifying mem-path.
2. for memory banks, allocates all ram with
one memory_region_allocate_system_memory(), and use
memory_region_init_alias() to initialize memory banks.
Tested machines: default(g3beige), mac99, taihu, bamboo, ref405ep.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
If a negative integer is used for the max_bytes parameter, QEMU currently
calls abort() and leaves behind a core dump. This patch replaces the
abort with a simple error message to make the reason for the termination
clearer. This also ensures device-hotplug with invalid input doesn't
cause qemu to quit.
There is an underlying insufficiency in the parameter parsing code of QEMU
that renders it unable to reject negative values for unsigned properties,
thus the error message "a non-negative integer below 2^63" is the most
user-friendly and correct message we can give until the underlying
insufficiency is corrected.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Replaced '_' with '-' to comply with QOM guidelines.
Made the conversion from command line to QMP in vl.c.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
new qtest. Michael sent a pull request of his own, so I dropped
the vhost changes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=4qtI
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
Andreas's fixes to --enable-modules, two 2.1 regression fixes, and a
new qtest. Michael sent a pull request of his own, so I dropped
the vhost changes.
# gpg: Signature made Fri 18 Jul 2014 14:30:34 BST using RSA key ID 9B4D86F2
# gpg: Can't check signature: public key not found
* remotes/bonzini/tags/for-upstream:
Revert "kvmclock: Ensure time in migration never goes backward"
Revert "kvmclock: Ensure proper env->tsc value for kvmclock_current_nsec calculation"
module: Don't complain when a module is absent
module: Simplify module_load()
qtest: new test for wdt_ib700
target-i386: Allow execute from user mode when SMEP is enabled.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This reverts commit a096b3a673.
This patch caused a hang that was fixed by commit 9b17868 (kvmclock:
Ensure proper env->tsc value for kvmclock_current_nsec calculation,
2014-06-03), and we just had to revert that commit. Drop this one
too.
Cc: agraf@suse.de
Cc: mtosatti@redhat.com
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This reverts commit 9b1786829a.
This patch fixed a hang introduced by commit a096b3a (kvmclock: Ensure
time in migration never goes backward, 2014-05-16), but it causes
a regression in migration whose cause is not quite clear.
Because of this, I'm choosing to revert both patches. This trades a
2.1 regression for a bug that's been there forever.
Cc: agraf@suse.de
Cc: mtosatti@redhat.com
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Minor bugfixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTyF+IAAoJECgfDbjSjVRpB/AIAJUJLrdwwkZQymAb62e0Xe4L
EYXhWr6R3J/yipgm7oko8e95fR7R40cUNrUHeH4w34Gp3vTMWyIxflYbyvSpd6KG
jQDZEwJG1oIGRU6cL72cN8QuF6XUXk8QPSN6kfWL0OgxeS7hP6KgL/wJRuzDOCm9
jsK3mE4+acFvGMKw36q0SCYJJFUxOrXj78vo1T5szizX1OKidMuQkByL96XNV3VQ
X5RlP7IRpSyQ1JM9n97gwywjaCM/7SlgdO3YRKzGdClFWNgZ8XqO4K6Loi8x2RWC
LrzID/i36M7veAoHAIvgs7AcUKbCyFoDYpL3mdAZB0y/XNIzKecIqrMm9IMtBLM=
=AoMw
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,vhost,test fixes
Minor bugfixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 18 Jul 2014 00:43:04 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
vhost-user: minor cleanups
qtest: Adapt vhost-user-test to latest vhost-user changes
vhost-user: Fix VHOST_SET_MEM_TABLE processing
qtest: fix vhost-user-test compilation with old GLib
fix typo: apci -> acpi
pc_piix: Reuse pc_compat_1_2() for pc-0.1[0123]
pc: fix qemu exiting with error when -m X < 128 with old machines types
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qemu_get_ram_fd doesn't accept a guest physical address. ram_addr_t are
opaque values that are assigned in qemu_ram_alloc.
Find the ram_addr_t corresponding to the userspace_addr using qemu_ram_addr_from_host,
and then call qemu_get_ram_fd on it.
Thanks to Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
This checks that s->chr is not NULL before using it.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We keep port 0 reserved for compat with older guests, where only
virtio-console was expected. Even if a system is started without a
virtio-console port, port #0 is kept aside. However, after a
virtconsole port is unplugged, port id 0 became available, and the next
hotplug of a virtserialport caused failure due to it not being a console
port.
Steps to reproduce:
$ ./x86_64-softmmu/qemu-system-x86_64 -m 512 -cpu host -enable-kvm -device virtio-serial-pci -monitor stdio -vnc :1
QEMU 2.0.91 monitor - type 'help' for more information
(qemu) device_add virtconsole,id=p1
(qemu) device_del p1
(qemu) device_add virtserialport,id=p1
Port number 0 on virtio-serial devices reserved for virtconsole devices for backward compatibility.
Device 'virtserialport' could not be initialized
(qemu) quit
Reported-by: dengmin <mdeng@redhat.com>
Reviewed-by: Amos Kong <akong@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
The permission of TCE entry should exclude physical base address.
Otherwise, unmapping TCE entry can be interpreted to mapping TCE
entry wrongly for VFIO devices.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
0b183fc87 "memory: move mem_path handling to
memory_region_allocate_system_memory" disabled -mempath use for all
machines that do not use memory_region_allocate_system_memory() to
register RAM. Since SPAPR uses memory_region_init_ram(), the huge pages
support was disabled for it.
This replaces memory_region_init_ram()+vmstate_register_ram_global() with
memory_region_allocate_system_memory() to get huge pages back.
This changes RAM size from (ram_limit - rma_alloc_size) to ram_limit as
the previous patch moved RMA memory region allocation after RAM allocation
and therefore this change does not have immediate effect but simplifies
the code.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
PPC970 does not support VRMA (virtual RMA) so real memory required
for SLOF to execute must be allocated by the KVM_ALLOCATE_RMA ioctl.
Later this memory is used as a part of the guest RAM area.
The RMA allocating code also registers a memory region for this piece
of RAM.
We are going to simplify memory regions layout: RMA memory region
will be a subregion in the RAM memory region, both starting from zero.
This way we will not have to take care of start address alignment for
the piece of RAM next to the RMA.
This moves memory region business closer to the RAM memory region
creation/allocation code.
As this is a mechanical patch, no change in behaviour is expected.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[agraf: fix compilation on non-kvm systems]
Signed-off-by: Alexander Graf <agraf@suse.de>
Commit 0b183fc871:"memory: move mem_path handling to
memory_region_allocate_system_memory" split memory_region_init_ram and
memory_region_init_ram_from_file. Also it moved mem-path handling a step
up from memory_region_init_ram to memory_region_allocate_system_memory.
Therefore for any board that uses memory_region_init_ram directly,
-mem-path is not supported.
Fix this by replacing memory_region_init_ram with
memory_region_allocate_system_memory.
Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Now requests are submitted as a batch, so it is natural
to notify guest as a batch too.
This may suppress interrupt notification to VM a lot:
- in my test, decreased by ~13K/sec
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The callback has to be saved and reset in virtio_blk_data_plane_start(),
otherwise dataplane's requests will be completed in qemu aio context.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABAgAGBQJTw/aQAAoJEBvWZb6bTYbyQFkQAJ1/P6aG5EOd8dBQ2rNZ72Zp
tWLnCQNZFIRLu1PGwiiqKihRk3N+YSMh0xERe1H8ZPwv1xIpia5zfcZ+fwEizyb2
62zaTSSbUssWvt/p/mnb8K4H3HhBnEfEcQsFJi9GiML8G7rFwq5pUYTPfu0DQkq0
+j1sk/sfzaKfdzDuxpz1cxPkFw7BjDTPDJPsKJCSok25sS7EhfN00auc33r8427k
k5p/1xz7K/edUhZ86XhCIOs5bHIGxEnpK4bjV5F4MXCMC5vgp1VFFrK8GRG7rncO
rB0rYCzpgxLA8DYpSGOIl6VNfZfHfvtrAdPbQwPfh1FzEya2PL/WorfwFcibKU3V
3aa07rVOunIxVsCET49Q36RnSCX9COKww9BJxcsLu7C/G8id4tu67OS0/FMI/EaJ
1oy7miUJuWhZEA115zyBfWBrv88PgNdlYVP8NtekBoHaL5m+Tk6ZAVmmxz5AxDZs
zXrzUgotQ+cQZdeHJ/UVvjk4J1RUsolOEIwASgxBFph4fwAT/kRtlkZCpX/2xfDA
VSTxKqoiQkdepQzBcNBOJvhQ38kU5qQ3AZb871T+y4WwP6jKj8kqZ7yiFf6yYz4a
AqzSpichWVan99HuTLfiexHyq4r2D75To6ZQFVduYhQg8YX5byDcjtiQRFyy1uKv
FwkEa/mpZdB1p0fSc7i3
=8zIe
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
Misc 2.1 fixes regarding character/serial devices and SCSI.
# gpg: Signature made Mon 14 Jul 2014 16:26:08 BST using RSA key ID 9B4D86F2
# gpg: Can't check signature: public key not found
* remotes/bonzini/tags/for-upstream:
serial-pci: remove memory regions from BAR before destroying them
virtio-scsi: fix with -M pc-i440fx-2.0
serial: change retry logic to avoid concurrency
qemu-char: fix deadlock with "-monitor pty"
scsi: Report error when lun number is in use
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Whenever serial_xmit fails to transmit a byte it adds a watch that would
call it again when the "line" becomes ready. This results in a retry
chain:
serial_xmit -> add_watch -> serial_xmit
Each chain is able to transmit one character, and for every character
passed to serial by the guest driver a new chain is spawned.
The problem lays with the fact that a new chain is spawned even when
there is one already waiting on the watch. So there can be several retry
chains waiting concurrently on one "line". Every chain tries to transmit
current character, so character order is not messed up. But also every
chain increases retry counter (tsr_retry). If there are enough
concurrent chains this counter will hit MAX_XMIT_RETRY value and
the character will be dropped.
To reproduce this bug you need to feed serial output to some program
consuming it slowly enough. A python script from bug #1335444
description is an example of such program.
This commit changes retry logic in the following way to avoid
concurrency: instead of spawning a new chain for each character being
transmitted spawn only one and make it transmit characters until FIFO is
empty.
The change consists of two parts:
- add a do {} while () loop in serial_xmit (diff is a bit erratic
for this part, diff -w will show actual change),
- do not call serial_xmit from serial_ioport_write if there is one
waiting on the watch already.
This should fix another issue causing bug #1335444.
Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=YxHy
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block patches for 2.1.0-rc2 (v2)
# gpg: Signature made Mon 14 Jul 2014 11:04:12 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (22 commits)
ide: Treat read/write beyond end as invalid
virtio-blk: Treat read/write beyond end as invalid
virtio-blk: Bypass error action and I/O accounting on invalid r/w
virtio-blk: Factor common checks out of virtio_blk_handle_read/write()
dma-helpers: Fix too long qiov
qtest: fix vhost-user-test compilation with old GLib
tests: Fix unterminated string output visitor enum human string
AioContext: do not rely on aio_poll(ctx, true) result to end a loop
virtio-blk: embed VirtQueueElement in VirtIOBlockReq
virtio-blk: avoid g_slice_new0() for VirtIOBlockReq and VirtQueueElement
dataplane: do not free VirtQueueElement in vring_push()
virtio-blk: avoid dataplane VirtIOBlockReq early free
block: Assert qiov length matches request length
qed: Make qiov match request size until backing file EOF
qcow2: Make qiov match request size until backing file EOF
block: Make qiov match the request size until EOF
AioContext: speed up aio_notify
test-aio: fix GSource-based timer test
block: drop aio functions that operate on the main AioContext
block: prefer aio_poll to qemu_aio_wait
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The block layer fails such reads and writes just fine. However, they
then get treated like valid operations that fail: the error action
gets executed. Unwanted; reporting the error to the guest is the only
sensible action.
Reject them before passing them to the block layer. This bypasses the
error action and I/O accounting. Not quite correct for DMA, because
DMA can fail after some success, and when that happens, the part that
succeeded isn't counted. Tolerable, because I/O accounting is an
inconsistent mess anyway.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The block layer fails such reads and writes just fine. However, they
then get treated like valid operations that fail: the error action
gets executed. Unwanted; reporting the error to the guest is the only
sensible action.
Reject them before passing them to the block layer. This bypasses the
error action and I/O accounting.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When a device model's I/O operation fails, we execute the error
action. This lets layers above QEMU implement thin provisioning, or
attempt to correct errors before they reach the guest. But when the
I/O operation fails because it's invalid, reporting the error to the
guest is the only sensible action.
If the guest's read or write asks for an invalid sector range, fail
the request right away, without considering the error action. No
change with error action BDRV_ACTION_REPORT.
Furthermore, bypass I/O accounting, because we want to track only I/O
that actually reaches the block layer.
The next commit will extend "invalid sector range" to cover attempts
to read/write beyond the end of the medium.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The memory allocation between hw/block/virtio-blk.c,
hw/block/dataplane/virtio-blk.c, and hw/virtio/dataplane/vring.c is
messy. Structs are allocated in different files than they are freed in.
This is risky and makes memory leaks easier.
Embed VirtQueueElement in VirtIOBlockReq to reduce the amount of memory
allocation we need to juggle. This also makes vring.c and virtio.c
slightly more similar.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
