According to the Zvfbfmin definition in the RISC-V BF16 extensions spec,
the Zvfbfmin extension only requires either the V extension or the
Zve32f extension.
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240321170929.1162507-1-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit 3b8022269c added the capability of named features/profile
extensions to be added in riscv,isa. To do that we had to assign priv
versions for each one of them in isa_edata_arr[]. But this resulted in a
side-effect: vendor CPUs that aren't running priv_version_latest started
to experience warnings for these profile extensions [1]:
| $ qemu-system-riscv32 -M sifive_e
| qemu-system-riscv32: warning: disabling zic64b extension for hart
0x00000000 because privilege spec version does not match
| qemu-system-riscv32: warning: disabling ziccamoa extension for
hart 0x00000000 because privilege spec version does not match
This is benign as far as the CPU behavior is concerned since disabling
both extensions is a no-op (aside from riscv,isa). But the warnings are
unpleasant to deal with, especially because we're sending user warnings
for extensions that users can't enable/disable.
Instead of enabling all named features all the time, separate them by
priv version. During finalize() time, after we decided which
priv_version the CPU is running, enable/disable all the named extensions
based on the priv spec chosen. This will be enough for a bug fix, but as
a future work we should look into how we can name these extensions in a
way that we don't need an explicit ext_name => priv_ver as we're doing
here.
The named extensions being added in isa_edata_arr[] that will be
enabled/disabled based solely on priv version can be removed from
riscv_cpu_named_features[]. 'zic64b' is an extension that can be
disabled based on block sizes so it'll retain its own flag and entry.
[1] https://lists.gnu.org/archive/html/qemu-devel/2024-03/msg02592.html
Reported-by: Clément Chigot <chigot@adacore.com>
Fixes: 3b8022269c ("target/riscv: add riscv,isa to named features")
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Tested-by: Clément Chigot <chigot@adacore.com>
Message-ID: <20240312203214.350980-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Named features are extensions which don't make sense for users to
control and are therefore not exposed on the command line. However,
svade is an extension which makes sense for users to control, so treat
it like a "normal" extension. The default is false, even for the max
cpu type, since QEMU has always implemented hardware A/D PTE bit
updating, so users must opt into svade (or get it from a CPU type
which enables it by default).
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240215223955.969568-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Gate hardware A/D PTE bit updating on {m,h}envcfg.ADUE and only
enable menvcfg.ADUE on reset if svade has not been selected. Now
that we also consider svade, we have four possible configurations:
1) !svade && !svadu
use hardware updating and there's no way to disable it
(the default, which maintains past behavior. Maintaining
the default, even with !svadu is a change that fixes [1])
2) !svade && svadu
use hardware updating, but also provide {m,h}envcfg.ADUE,
allowing software to switch to exception mode
(being able to switch is a change which fixes [1])
3) svade && !svadu
use exception mode and there's no way to switch to hardware
updating
(this behavior change fixes [2])
4) svade && svadu
use exception mode, but also provide {m,h}envcfg.ADUE,
allowing software to switch to hardware updating
(this behavior change fixes [2])
Fixes: 0af3f115e6 ("target/riscv: Add *envcfg.HADE related check in address translation") [1]
Fixes: 48531f5adb ("target/riscv: implement svade") [2]
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240215223955.969568-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The RVA22U64 and RVA22S64 profiles mandates certain extensions that,
until now, we were implying that they were available.
We can't do this anymore since named features also has a riscv,isa
entry. Let's add them to riscv_cpu_named_features[].
Instead of adding one bool for each named feature that we'll always
implement, i.e. can't be turned off, add a 'ext_always_enabled' bool in
cpu->cfg. This bool will be set to 'true' in TCG accel init, and all
named features will point to it. This also means that KVM won't see
these features as always enable, which is our intention.
If any accelerator adds support to disable one of these features, we'll
have to promote them to regular extensions and allow users to disable it
via command line.
After this patch, here's the riscv,isa from a buildroot using the
'rva22s64' CPU:
# cat /proc/device-tree/cpus/cpu@0/riscv,isa
rv64imafdc_zic64b_zicbom_zicbop_zicboz_ziccamoa_ziccif_zicclsm_ziccrse_
zicntr_zicsr_zifencei_zihintpause_zihpm_za64rs_zfhmin_zca_zcd_zba_zbb_
zbs_zkt_ssccptr_sscounterenw_sstvala_sstvecd_svade_svinval_svpbmt#
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20240215223955.969568-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Further discussions after the introduction of rva22 support in QEMU
revealed that what we've been calling 'named features' are actually
regular extensions, with their respective riscv,isa DTs. This is
clarified in [1]. [2] is a bug tracker asking for the profile spec to be
less cryptic about it.
As far as QEMU goes we understand extensions as something that the user
can enable/disable in the command line. This isn't the case for named
features, so we'll have to reach a middle ground.
We'll keep our existing nomenclature 'named features' to refer to any
extension that the user can't control in the command line. We'll also do
the following:
- 'svade' and 'zic64b' flags are renamed to 'ext_svade' and
'ext_zic64b'. 'ext_svade' and 'ext_zic64b' now have riscv,isa strings and
priv_spec versions;
- skip name feature check in cpu_bump_multi_ext_priv_ver(). Now that
named features have a riscv,isa and an entry in isa_edata_arr[] we
don't need to gate the call to cpu_cfg_ext_get_min_version() anymore.
[1] https://github.com/riscv/riscv-profiles/issues/121
[2] https://github.com/riscv/riscv-profiles/issues/142
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240215223955.969568-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Recent changes in options handling removed the 'mmu' default the bare
CPUs had, meaning that we must enable 'mmu' by hand when using the
rva22s64 profile CPU.
Given that this profile is setting a satp mode, it already implies that
we need a 'mmu'. Enable the 'mmu' in this case.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240215223955.969568-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
misa_mxl_max is now a class member and initialized only once for each
class. This also moves the initialization of gdb_core_xml_file which
will be referenced before realization in the future.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240203-riscv-v11-3-a23f4848a628@daynix.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
misa_mxl_max is common for all instances of a RISC-V CPU class so they
are better put into class.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240203-riscv-v11-2-a23f4848a628@daynix.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
It is initialized with a simple assignment and there is little room for
error. In fact, the validation is even more complex.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Acked-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240203-riscv-v11-1-a23f4848a628@daynix.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
There is no need to keep both 'vlen' and 'vlenb'. All existing code
that requires 'vlen' is retrieving it via 'vlenb << 3'.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240122161107.26737-14-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The array is empty and can be removed.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Vladimir Isaev <vladimir.isaev@syntacore.com>
tested-by tags added, rebased with Alistair's riscv-to-apply.next.
Message-ID: <20240112140201.127083-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Do the same thing we did with 'vlen' in the previous patch with 'elen'.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Vladimir Isaev <vladimir.isaev@syntacore.com>
Message-ID: <20240105230546.265053-10-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Turning 'vlen' into a class property will allow its default value to be
overwritten by cpu_init() later on, solving the issue we have now where
CPU specific settings are getting overwritten by the default.
Common validation bits are moved from riscv_cpu_validate_v() to
prop_vlen_set() to be shared with KVM.
And, as done with every option we migrated to riscv_cpu_properties[],
vendor CPUs can't have their 'vlen' value changed.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Vladimir Isaev <vladimir.isaev@syntacore.com>
Message-ID: <20240105230546.265053-9-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The same rework did in 'priv_spec' is done for 'vext_spec'. This time is
simpler, since we only accept one value ("v1.0") and we'll always have
env->vext_ver set to VEXT_VERSION_1_00_0, thus we don't need helpers to
convert string to 'vext_ver' back and forth like we needed for
'priv_spec'.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Vladimir Isaev <vladimir.isaev@syntacore.com>
Message-ID: <20240105230546.265053-8-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
'priv_spec' and 'vext_spec' are two string options used as a fancy way
of setting integers in the CPU state (cpu->env.priv_ver and
cpu->env.vext_ver). It requires us to deal with string parsing and to
store them in cpu_cfg.
We must support these string options, but we don't need to store them.
We have a precedence for this kind of arrangement in target/ppc/compat.c,
ppc_compat_prop_get|set, getters and setters used for the
'max-cpu-compat' class property of the pseries ppc64 machine. We'll do
the same with both 'priv_spec' and 'vext_spec'.
For 'priv_spec', the validation from riscv_cpu_validate_priv_spec() will
be done by the prop_priv_spec_set() setter, while also preventing it to
be changed for vendor CPUs. Add two helpers that converts env->priv_ver
back and forth to its string representation. These helpers allow us to
get a string and set 'env->priv_ver' and return a string giving the
current env->priv_ver value. In other words, make the cpu->cfg.priv_spec
string obsolete.
Last but not the least, move the reworked 'priv_spec' option to
riscv_cpu_properties[].
After all said and done, we don't need to store the 'priv_spec' string in
the CPU state, and we're now protecting vendor CPUs from priv_ver
changes:
$ ./build/qemu-system-riscv64 -M virt -cpu sifive-e51,priv_spec="v1.12.0"
qemu-system-riscv64: can't apply global sifive-e51-riscv-cpu.priv_spec=v1.12.0:
CPU 'sifive-e51' does not allow changing the value of 'priv_spec'
Current 'priv_spec' val: v1.10.0
$
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Vladimir Isaev <vladimir.isaev@syntacore.com>
Message-ID: <20240105230546.265053-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We'll use this function in target/riscv/cpu.c to implement setters that
won't allow vendor CPU options to be changed.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Vladimir Isaev <vladimir.isaev@syntacore.com>
Message-ID: <20240105230546.265053-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
If the B extension is enabled warn if the user has disabled any of the
required extensions that are part of the 'B' extension. Conversely
enable the extensions that make up the 'B' extension if it is enabled.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240111161644.33630-3-rbradford@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add the infrastructure for the 'B' extension which is the union of the
Zba, Zbb and Zbs instructions.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240111161644.33630-2-rbradford@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
QEMU coding style recommends using structure typedefs.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The tcg_cpu_FOO() names are riscv specific, so rename
them as riscv_tcg_cpu_FOO() (as other names in this file)
to ease navigating the code.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240111120221.35072-6-philmd@linaro.org>
Certain S-mode profiles, like RVA22S64 and RVA23S64, mandate all the
mandatory extensions of their respective U-mode profiles. RVA22S64
includes all mandatory extensions of RVA22U64, and the same happens with
RVA23 profiles.
Add a 'parent' field to allow profiles to enable other profiles. This
will allow us to describe S-mode profiles by specifying their parent
U-mode profile, then adding just the S-mode specific extensions.
We're naming the field 'parent' to consider the possibility of other
uses (e.g. a s-mode profile including a previous s-mode profile) in the
future.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231218125334.37184-25-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
'satp_mode' is a requirement for supervisor profiles like RVA22S64.
User-mode/application profiles like RVA22U64 doesn't care.
Add 'satp_mode' to the profile description. If a profile requires it,
set it during cpu_set_profile(). We'll also check it during finalize()
to validate if the running config implements the profile.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231218125334.37184-24-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Some profiles, like RVA22S64, has a priv_spec requirement.
Make this requirement explicit for all profiles. We'll validate this
requirement finalize() time and, in case the user chooses an
incompatible priv_spec while activating a profile, a warning will be
shown.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231218125334.37184-21-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
'svade' is a RVA22S64 profile requirement, a profile we're going to add
shortly. It is a named feature (i.e. not a formal extension, not defined
in riscv,isa DT at this moment) defined in [1] as:
"Page-fault exceptions are raised when a page is accessed when A bit is
clear, or written when D bit is clear.".
As far as the spec goes, 'svade' is one of the two distinct modes of
handling PTE_A and PTE_D. The other way, i.e. update PTE_A/PTE_D when
they're cleared, is defined by the 'svadu' extension. Checking
cpu_helper.c, get_physical_address(), we can verify that QEMU is
compliant with that: we will update PTE_A/PTE_D if 'svadu' is enabled,
or throw a page-fault exception if 'svadu' isn't enabled.
So, as far as we're concerned, 'svade' translates to 'svadu must be
disabled'.
We'll implement it like 'zic64b': an internal flag that profiles can
enable. The flag will not be exposed to users.
[1] https://github.com/riscv/riscv-profiles/blob/main/profiles.adoc
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231218125334.37184-20-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This CPU was suggested by Alistair [1] and others during the profile
design discussions. It consists of the bare 'rv64i' CPU with rva22u64
enabled by default, like an alias of '-cpu rv64i,rva22u64=true'.
Users now have an even easier way of consuming this user-mode profile by
doing '-cpu rva22u64'. Extensions can be enabled/disabled at will on top
of it.
We can boot Linux with this "user-mode" CPU by doing:
-cpu rva22u64,sv39=true,s=true,zifencei=true
[1] https://lore.kernel.org/qemu-riscv/CAKmqyKP7xzZ9Sx=-Lbx2Ob0qCfB7Z+JO944FQ2TQ+49mqo0q_Q@mail.gmail.com/
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231218125334.37184-19-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Enabling a profile and then disabling some of its mandatory extensions
is a valid use. It can be useful for debugging and testing. But the
common expected use of enabling a profile is to enable all its mandatory
extensions.
Add an user warning when mandatory extensions from an enabled profile
are disabled in the command line. We're also going to disable the
profile flag in this case since the profile must include all the
mandatory extensions. This flag can be exposed by QMP to indicate the
actual profile state after the CPU is realized.
After this patch, this will throw warnings:
-cpu rv64,rva22u64=true,zihintpause=false,zicbom=false,zicboz=false
qemu-system-riscv64: warning: Profile rva22u64 mandates disabled extension zihintpause
qemu-system-riscv64: warning: Profile rva22u64 mandates disabled extension zicbom
qemu-system-riscv64: warning: Profile rva22u64 mandates disabled extension zicboz
Note that the following will NOT throw warnings because the profile is
being enabled last, hence all its mandatory extensions will be enabled:
-cpu rv64,zihintpause=false,zicbom=false,zicboz=false,rva22u64=true
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231218125334.37184-17-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
RVG behaves like a profile: a single flag enables a set of bits. Right
now we're considering user choice when handling RVG and zicsr/zifencei
and ignoring user choice on MISA bits.
We'll add user warnings for profiles when the user disables its
mandatory extensions in the next patch. We'll do the same thing with RVG
now to keep consistency between RVG and profile handling.
First and foremost, create a new RVG only helper to avoid clogging
riscv_cpu_validate_set_extensions(). We do not want to annoy users with
RVG warnings like we did in the past (see 9b9741c38f), thus we'll only
warn if RVG was user set and the user disabled a RVG extension in the
command line.
For every RVG MISA bit (IMAFD), zicsr and zifencei, the logic then
becomes:
- if enabled, do nothing;
- if disabled and not user set, enable it;
- if disabled and user set, throw a warning that it's a RVG mandatory
extension.
This same logic will be used for profiles in the next patch.
Note that this is a behavior change, where we would error out if the
user disabled either zicsr or zifencei. As long as users are explicitly
disabling things in the command line we'll let them have a go at it, at
least in this step. We'll error out later in the validation if needed.
Other notable changes from the previous RVG code:
- use riscv_cpu_write_misa_bit() instead of manually updating both
env->misa_ext and env->misa_ext_mask;
- set zicsr and zifencei directly. We're already checking if they
were user set and priv version will never fail for these
extensions, making cpu_cfg_ext_auto_update() redundant.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231218125334.37184-16-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Previous patches added several g_hash_table_insert() patterns. Add two
helpers, one for each user hash, to make the code cleaner.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231218125334.37184-15-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The profile support is handling multi-letter extensions only. Let's add
support for MISA bits as well.
We'll go through every known MISA bit. If the profile doesn't declare
the bit as mandatory, ignore it. Otherwise, set the bit in env->misa_ext
and env->misa_ext_mask.
Now that we're setting profile MISA bits, one can use the rv64i CPU to boot
Linux using the following options:
-cpu rv64i,rva22u64=true,rv39=true,s=true,zifencei=true
In the near future, when rva22s64 (where, 's', 'zifencei' and sv39 are
mandatory), is implemented, rv64i will be able to boot Linux loading
rva22s64 and no additional flags.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231218125334.37184-14-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We have two instances of the setting/clearing a MISA bit from
env->misa_ext and env->misa_ext_mask pattern. And the next patch will
end up adding one more.
Create a helper to avoid code repetition.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20231218125334.37184-13-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We already track user choice for multi-letter extensions because we
needed to honor user choice when enabling/disabling extensions during
realize(). We refrained from adding the same mechanism for MISA
extensions since we didn't need it.
Profile support requires tne need to check for user choice for MISA
extensions, so let's add the corresponding hash now. It works like the
existing multi-letter hash (multi_ext_user_opts) but tracking MISA bits
options in the cpu_set_misa_ext_cfg() callback.
Note that we can't re-use the same hash from multi-letter extensions
because that hash uses cpu->cfg offsets as keys, while for MISA
extensions we're using MISA bits as keys.
After adding the user hash in cpu_set_misa_ext_cfg(), setting default
values with object_property_set_bool() in add_misa_properties() will end
up marking the user choice hash with them. Set the default value
manually to avoid it.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20231218125334.37184-12-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The TCG emulation implements all the extensions described in the
RVA22U64 profile, both mandatory and optional. The mandatory extensions
will be enabled via the profile flag. We'll leave the optional
extensions to be enabled by hand.
Given that this is the first profile we're implementing in TCG we'll
need some ground work first:
- all profiles declared in riscv_profiles[] will be exposed to users.
TCG is the main accelerator we're considering when adding profile
support in QEMU, so for now it's safe to assume that all profiles in
riscv_profiles[] will be relevant to TCG;
- we'll not support user profile settings for vendor CPUs. The flags
will still be exposed but users won't be able to change them;
- profile support, albeit available for all non-vendor CPUs, will be
based on top of the new 'rv64i' CPU. Setting a profile to 'true' means
enable all mandatory extensions of this profile, setting it to 'false'
will disable all mandatory profile extensions of the CPU, which will
obliterate preset defaults. This is not a problem for a bare CPU like
rv64i but it can allow for silly scenarios when using other CPUs. E.g.
an user can do "-cpu rv64,rva22u64=false" and have a bunch of default
rv64 extensions disabled. The recommended way of using profiles is the
rv64i CPU, but users are free to experiment.
For now we'll handle multi-letter extensions only. MISA extensions need
additional steps that we'll take care later. At this point we can boot a
Linux buildroot using rva22u64 using the following options:
-cpu rv64i,rva22u64=true,sv39=true,g=true,c=true,s=true
Note that being an usermode/application profile we still need to
explicitly set 's=true' to enable Supervisor mode to boot Linux.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231218125334.37184-11-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
zic64b is defined in the RVA22U64 profile [1] as a named feature for
"Cache blocks must be 64 bytes in size, naturally aligned in the address
space". It's a fantasy name for 64 bytes cache blocks. The RVA22U64
profile mandates this feature, meaning that applications using this
profile expects 64 bytes cache blocks.
To make the upcoming RVA22U64 implementation complete, we'll zic64b as
a 'named feature', not a regular extension. This means that:
- it won't be exposed to users;
- it won't be written in riscv,isa.
This will be extended to other named extensions in the future, so we're
creating some common boilerplate for them as well.
zic64b is default to 'true' since we're already using 64 bytes blocks.
If any cache block size (cbo{m,p,z}_blocksize) is changed to something
different than 64, zic64b is set to 'false'.
Our profile implementation will then be able to check the current state
of zic64b and take the appropriate action (e.g. throw a warning).
[1] https://github.com/riscv/riscv-profiles/releases/download/v1.0/profiles.pdf
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231218125334.37184-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We'll add a new bare CPU type that won't have any default priv_ver. This
means that the CPU will default to priv_ver = 0, i.e. 1.10.0.
At the same we'll allow these CPUs to enable extensions at will, but
then, if the extension has a priv_ver newer than 1.10, we'll end up
disabling it. Users will then need to manually set priv_ver to something
other than 1.10 to enable the extensions they want, which is not ideal.
Change the setter() of extensions to allow user enabled extensions to
bump the priv_ver of the CPU. This will make it convenient for users to
enable extensions for CPUs that doesn't set a default priv_ver.
This change does not affect any existing CPU: vendor CPUs does not allow
extensions to be enabled, and generic CPUs are already set to priv_ver
LATEST.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231218125334.37184-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Our current logic in get/setters of MISA and multi-letter extensions
works because we have only 2 CPU types, generic and vendor, and by using
"!generic" we're implying that we're talking about vendor CPUs. When adding
a third CPU type this logic will break so let's handle it beforehand.
In set_misa_ext_cfg() and set_multi_ext_cfg(), check for "vendor" cpu instead
of "not generic". The "generic CPU" checks remaining are from
riscv_cpu_add_misa_properties() and cpu_add_multi_ext_prop() before
applying default values for the extensions.
This leaves us with:
- vendor CPUs will not allow extension enablement, all other CPUs will;
- generic CPUs will inherit default values for extensions, all others
won't.
And now we can add a new, third CPU type, that will allow extensions to
be enabled and will not inherit defaults, without changing the existing
logic.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231218125334.37184-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add support for amocas.w/d/q instructions which are part of the ratified
Zacas extension: https://github.com/riscv/riscv-zacas
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20231207153842.32401-2-rbradford@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The extensions zicntr and zihpm were officially added in the privilege
instruction set specification 1.12. However, QEMU has been implemented
them long before it and thus they are forced to be on during the cpu
initialization to ensure compatibility (see riscv_cpu_init).
riscv_cpu_disable_priv_spec_isa_exts was not updated when the above
behavior was introduced, resulting in these extensions to be disabled
after all.
Signed-off-by: Clément Chigot <chigot@adacore.com>
Fixes: c004099330 ("target/riscv: add zicntr extension flag for TCG")
Fixes: 0824121660 ("target/riscv: add zihpm extension flag for TCG")
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231114123913.536194-1-chigot@adacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Using a mask instead of the number of PMU devices supports the accurate
emulation of platforms that have a discontinuous set of PMU counters.
The "pmu-num" property now generates a warning when used by the user on
the command line.
Rather than storing the value for "pmu-num" convert it directly to the
mask if it is specified (overwriting the default "pmu-mask" value)
likewise the value is calculated from the mask if the property value is
obtained.
In the unusual situation that both "pmu-mask" and "pmu-num" are provided
then then the order on the command line determines which takes
precedence (later overwriting earlier.)
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231031154000.18134-5-rbradford@rivosinc.com>
[Changes by AF
- Fixup ext_zihpm logic after rebase
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
More closely follow the QEMU style by returning an Error and propagating
it there is an error relating to the PMU setup.
Further simplify the function by removing the num_counters parameter as
this is available from the passed in cpu pointer.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20231031154000.18134-2-rbradford@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Vector crypto spec defines the ShangMi algorithm suite related
extensions (Zvks, Zvksc, Zvksg) combined by several vector crypto
extensions.
Signed-off-by: Max Chou <max.chou@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20231026151828.754279-9-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Vector crypto spec defines the NIST algorithm suite related extensions
(Zvkn, Zvknc, Zvkng) combined by several vector crypto extensions.
Signed-off-by: Max Chou <max.chou@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20231026151828.754279-7-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
After vector crypto spec v1.0.0-rc3 release, the Zvkb extension is
defined as a proper subset of the Zvbb extension. And both the Zvkn and
Zvks shorthand extensions replace the included Zvbb extension by Zvkb
extnesion.
Signed-off-by: Max Chou <max.chou@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20231026151828.754279-4-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Vector crypto spec defines the Zvkt extension that included all of the
instructions of Zvbb & Zvbc extensions and some vector instructions.
Signed-off-by: Max Chou <max.chou@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20231026151828.754279-2-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
zihpm is the Hardware Performance Counters extension described in
chapter 12 of the unprivileged spec. It describes support for 29
unprivileged performance counters, hpmcounter3-hpmcounter31.
As with zicntr, QEMU already implements zihpm before it was even an
extension. zihpm is also part of the RVA22 profile, so add it to QEMU
to complement the future profile implementation. Default it to 'true'
for all existing CPUs since it was always present in the code.
As for disabling it, there is already code in place in
target/riscv/csr.c in all predicates for these counters (ctr() and
mctr()) that disables them if cpu->cfg.pmu_num is zero. Thus, setting
cpu->cfg.pmu_num to zero if 'zihpm=false' is enough to disable the
extension.
Set cpu->pmu_avail_ctrs mask to zero as well since this is also checked
to verify if the counters exist.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231023153927.435083-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
zicntr is the Base Counters and Timers extension described in chapter 12
of the unprivileged spec. It describes support for RDCYCLE, RDTIME and
RDINSTRET.
QEMU already implements it in TCG way before it was a discrete
extension. zicntr is part of the RVA22 profile, so let's add it to QEMU
to make the future profile implementation flag complete. Given than it
represents an already existing feature, default it to 'true' for all
CPUs.
For TCG, we need a way to disable zicntr if the user wants to. This is
done by restricting access to the CYCLE, TIME, and INSTRET counters via
the 'ctr()' predicate when we're about to access them.
Disabling zicntr happens via the command line or if its dependency,
zicsr, happens to be disabled. We'll check for zicsr during realize()
and, in case it's absent, disable zicntr. However, if the user was
explicit about having zicntr support, error out instead of disabling it.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231023153927.435083-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Smepmp is a ratified extension which qemu refers to as epmp.
Rename epmp to smepmp and add it to extension list so that
it is added to the isa string.
Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231019065546.1431579-1-mchitale@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add an API to check if a given CPU is compatible with the current
accelerator.
This will allow query-cpu-model-expansion to work properly in conditions
where QEMU supports both accelerators (TCG and KVM), QEMU is then
launched using TCG, and the API requests information about a KVM only
CPU (e.g. 'host' CPU).
KVM doesn't have such restrictions and, at least in theory, all CPUs
models should work with KVM. We will revisit this API in case we decide
to restrict the amount of KVM CPUs we support.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231018195638.211151-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The query-cpu-model-expansion API is capable of passing extra properties
to a given CPU model and tell callers if this custom configuration is
valid.
The RISC-V version of the API is not quite there yet. The reason is the
realize() flow in the TCG driver, where most of the validation is done
in tcg_cpu_realizefn(). riscv_cpu_finalize_features() is then used to
validate satp_mode for both TCG and KVM CPUs.
Our ARM friends uses a concept of 'finalize_features()', a step done in
the end of realize() where the CPU features are validated. We have a
riscv_cpu_finalize_features() helper that, at this moment, is only
validating satp_mode.
Re-use this existing helper to do all CPU extension validation we
required after at the end of realize(). Make it public to allow APIs to
use it. At this moment only the TCG driver requires a realize() time
validation, thus, to avoid adding accelerator specific helpers in the
API, riscv_cpu_finalize_features() uses
riscv_tcg_cpu_finalize_features() if we are running TCG. The API will
then use riscv_cpu_finalize_features() regardless of the current
accelerator.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231018195638.211151-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
With H-Ext supported, VS bits are all hardwired to one in MIDELEG
denoting always delegated interrupts. This is being done in rmw_mideleg
but given mideleg is used in other places when routing interrupts
this change initializes it in riscv_cpu_realize to be on the safe side.
Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231016111736.28721-4-rkanwal@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
