Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180119135719.24745-6-vsementsov@virtuozzo.com>
[eblake: adjust to next available test number]
Signed-off-by: Eric Blake <eblake@redhat.com>
When originally written, test 177 explicitly took care to run
with compat=0.10. Then I botched my own test in commit
81c219ac and f0a9c18f, by adding additional actions that require
v3 images. Split out the new code into a new v3-only test, 204,
and revert 177 back to its original state other than a new comment.
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20180117165420.15946-2-eblake@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This patch implements a test case for the scenario that was failing
prior to the patch "migration/ram.c: do not set 'postcopy_running' in
POSTCOPY_INCOMING_END", commit acab30b85d.
This new test file 201 was derived from the test file 181 authored
by Kevin Wolf.
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This test case will prevent future regressions with savevm and
IOThreads.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20171207201320.19284-7-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
QMP 'transaction' blockdev-snapshot-sync with multiple disks in an
IOThread is an untested code path. Several bugs have been found in
connection with this command. This patch adds a test case to prevent
future regressions.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20171206144550.22295-10-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Test clearing unknown autoclear_features by qcow2 on incoming
migration.
[ kwolf: Fixed wait for destination VM startup ]
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
After committing the qcow2 image contents into the base image, qemu-img
will call bdrv_make_empty to drop the payload in the layered image.
When this is done for qcow2 images, it blows away the LUKS encryption
header, making the resulting image unusable. There are two codepaths
for emptying a qcow2 image, and the second (slower) codepath leaves
the LUKS header intact, so force use of that codepath.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170929170843.3711-1-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add a test for qcow2 copy-on-read behavior, including exposure
for the just-fixed bugs.
The copy-on-read behavior is always to a qcow2 image, but the
test is careful to allow running with most image protocol/format
combos as the backing file being copied from (luks being the
exception, as it is harder to pass the right secret to all the
right places). In fact, for './check nbd', this appears to be
the first time we've had a qcow2 image wrapping NBD, requiring
an additional line in _filter_img_create to match the similar
line in _filter_img_info.
Invoking blkdebug to prove we don't write too much took some
effort to get working; and it requires that $TEST_WRAP (based
on $TEST_DIR) not be subject to word splitting. We may decide
later to have the entire iotests suite use relative rather than
absolute names, to avoid problems inherited by the absolute
name of $PWD or $TEST_DIR, at which point the sanity check in
this commit could be simplified.
This test requires at least 2G of consecutive memory to succeed;
as such, it is prone to spurious failures, particularly on
32-bit machines under load. This situation is detected and
triggers an early exit to skip the test, rather than a failure.
To manually provoke this setup on a beefier machine, I used:
$ (ulimit -S -v 1000000; ./check -qcow2 197)
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170918124230.8152-5-pbutsykin@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This involves a temporary read-write reopen if the backing file link in
the middle of a backing file chain should be changed and is therefore a
good test for the latest bdrv_reopen() vs. op blockers fixes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Non-shared storage migration with NBD and drive-mirror is currently not
tested by qemu-iotests. This test case covers the basic migration
scenario.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Based-on: <20170823134242.12080-1-famz@redhat.com>
Message-Id: <20170823140506.28723-1-stefanha@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This serves as a regression test for the bugs that were just fixed for
bdrv_reopen() between read-only and read-write mode.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
The new test 190 ensures we don't regress back to an infinite loop when
measuring the size of a 2T+ qcow2 image. I did not append to test 178,
because that test is also designed to run with format 'raw'; also, this
gives us some coverage of the measure command under the quick group.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A run of './check -qcow2 -g quick' on my machine produced only
two tests that took longer than 5 seconds; 178 took 18, and
189 took 7. Remove them from the quick group.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This test makes sure that all block devices show up on 'info block',
with all of the expected information, in different configurations.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-17-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-16-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20170705125738.8777-10-stefanha@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170702150510.23276-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170628120530.31251-27-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This extends the 087 iotest to cover LUKS encryption when doing
blockdev-add.
Two further tests are added to validate read/write of LUKS
encrypted images with a single file and with a backing file.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-15-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
When qemu is exited, all running jobs should be cancelled successfully.
This adds a test for this for all types of block jobs that currently
exist in qemu.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
No tests were covering write zeroes with unmap. Additionally,
I needed to prove that my previous patches for correct status
reporting and write zeroes optimizations actually had an impact.
The test works for cluster_size between 8k and 2M (for smaller
sizes, it fails because our allocation patterns are not contiguous
with small clusters - in part, the largest consecutive allocation
we tend to get is often bounded by the size covered by one L2
table).
Note that testing for zero clusters is tricky: 'qemu-io map'
reports whether data comes from the current layer of the image
(useful for sniffing out which regions of the file have
QCOW_OFLAG_ZERO) - but doesn't show which clusters have mappings;
while 'qemu-img map' sees "zero":true for both unallocated and
zero clusters for any qcow2 with no backing layer (so less useful
at detecting true zero clusters), but reliably shows mappings.
So we have to rely on both queries side-by-side at each point of
the test.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170507000552.20847-10-eblake@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Use blkdebug's new geometry constraints to emulate setups that
have needed past regression fixes: write zeroes asserting
when running through a loopback block device with max-transfer
smaller than cluster size, and discard rounding away portions
of requests not aligned to preferred boundaries. Also, add
coverage that the block layer is honoring max transfer limits.
For now, a single iotest performs all actions, with the idea
that we can add future blkdebug constraint test cases in the
same file; but it can be split into multiple iotests if we find
reason to run one portion of the test in more setups than what
are possible in the other.
For reference, the final portion of the test (checking whether
discard passes as much as possible to the lowest layers of the
stack) works as follows:
qemu-io: discard 30M at 80000001, passed to blkdebug
blkdebug: discard 511 bytes at 80000001, -ENOTSUP (smaller than
blkdebug's 512 align)
blkdebug: discard 14371328 bytes at 80000512, passed to qcow2
qcow2: discard 739840 bytes at 80000512, -ENOTSUP (smaller than
qcow2's 1M align)
qcow2: discard 13M bytes at 77M, succeeds
blkdebug: discard 15M bytes at 90M, passed to qcow2
qcow2: discard 15M bytes at 90M, succeeds
blkdebug: discard 1356800 bytes at 105M, passed to qcow2
qcow2: discard 1M at 105M, succeeds
qcow2: discard 308224 bytes at 106M, -ENOTSUP (smaller than qcow2's
1M align)
blkdebug: discard 1 byte at 111457280, -ENOTSUP (smaller than
blkdebug's 512 align)
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170429191419.30051-10-eblake@redhat.com
[mreitz: For cooperation with image locking, add -r to the qemu-io
invocation which verifies the image content]
Signed-off-by: Max Reitz <mreitz@redhat.com>
The previous commit:
commit a3e1505dae
Author: Eric Blake <eblake@redhat.com>
Date: Mon Dec 5 09:49:34 2016 -0600
qcow2: Don't strand clusters near 2G intervals during commit
extended the 097 test case so that it did two passes, once
with an internal snapshot, once without.
qcow (v1) does not support internal snapshots, so this change
broke test 097 when run against qcow.
This splits 097 in two, creating a new 176 that tests the
internal snapshot codepath, effectively putting 097 back
to its content before the above commit.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20170221115512.21918-8-berrange@redhat.com>
[eblake: test collisions: s/173/176/g]
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20170331185356.2479-2-eblake@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add tests for creating raw image with and without the preallocation
option.
Signed-off-by: Nir Soffer <nirsof@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add regression tests checking that qemu-io fails with non-zero exit code
when reading non-existing file or using the wrong image format.
Signed-off-by: Nir Soffer <nirsof@gmail.com>
Message-id: 20170201003120.23378-4-nirsof@gmail.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This test uses NFS and block-stream to force a lookup of a backing
image that has a relative filename, but a full backing image name
with the protocol path intact.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Message-id: 1a7a3d6e6d8af36cd5b47ed6ea93b5a9ededf81b.1485392617.git.jcody@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This tests the different supported methods to create floppy drives and
how they interact.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1477386868-21826-5-git-send-email-kwolf@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Broken in previous commit:
commit aaa4d20b49
Author: Kevin Wolf <kwolf@redhat.com>
Date: Wed Jun 1 15:21:05 2016 +0200
qcow2: Make copy_sectors() byte based
The copy_sectors() code was originally using the 'sector'
parameter for encryption, which was passed in by the caller
from the QCowL2Meta.offset field (aka the guest logical
offset).
After the change, the code is using 'cluster_offset' which
was passed in from QCow2L2Meta.alloc_offset field (aka the
host physical offset).
This would cause the data to be encrypted using an incorrect
initialization vector which will in turn cause later reads
to return garbage.
Although current qcow2 built-in encryption is blocked from
usage in the emulator, one could still hit this if writing
to the file via qemu-{img,io,nbd} commands.
Cc: qemu-stable@nongnu.org
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds the skip option which allows qemu-img dd to skip a number of blocks
before copying the input.
A test case was added to test the skip option.
Signed-off-by: Reda Sallahi <fullmanet@gmail.com>
Message-id: 20160810141609.32727-1-fullmanet@gmail.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This patch adds a basic dd subcommand analogous to dd(1) to qemu-img.
For the start, this implements the bs, if, of and count options and requires
both if and of to be specified (no stdin/stdout if not specified) and doesn't
support tty, pipes, etc.
The image format must be specified with -O for the output if the raw format
is not the intended one.
Two tests are added to test qemu-img dd.
Signed-off-by: Reda Sallahi <fullmanet@gmail.com>
Message-id: 20160810024312.14544-1-fullmanet@gmail.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
[mreitz: Moved test 158 to 170]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20160610185750.30956-6-mreitz@redhat.com
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This covers some more write_zeroes cases which are relevant for the
recent qcow2 optimisations that check the allocation status of the
backing file for partial cluster write_zeroes requests.
This needs to be separate from 034 because we can only support qcow2 in
this test case for multiple reasons: We check the allocation status
after write_zeroes with 'qemu-img map' and the optimised behaviour that
produces zero clusters is only implemented in qcow2; second, the map
command returns offsets that are qcow2 specific; and finally, we also
use 512 byte clusters which aren't supported for formats like qed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Since virtio-blk implements request merging itself these days, the only
remaining users are test cases for the function. That doesn't make the
function exactly useful any more.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
