Commit Graph

40 Commits

Author SHA1 Message Date
Gerd Hoffmann e0b8e72dd9 usb: fix port reset
commit 891fb2cd45 removed the implicit
detach before (re-)attaching in usb_attach().  Some usb host controllers
used that behavior though to do a port reset by a detach+attach
sequence.

This patch establishes old behavior by adding a new usb_reset() function
for port resets and putting it into use, thereby also unifying port
reset behavior of all host controllers.  The patch also adds asserts to
usb_attach() and usb_detach() to make sure the calls are symmetrical.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-10-13 12:58:51 +02:00
Michael S. Tsirkin 817e0b6fe8 pci: interrupt pin documentation update
Fix up some erroneous comments in code:
interrupt pins are named A-D, the
interrupt pin register is always readonly
and isn't zeroed out on reset.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-09-19 21:22:29 +03:00
Gerd Hoffmann 891fb2cd45 usb: claim port at device initialization time.
This patch makes qemu assign a port when creating the device, not when
attaching it.  For most usb devices this isn't a noticable difference
because they are in attached state all the time.

The change affects usb-host devices which live in detached state while
the real device is unplugged from the host.  They have a fixed port
assigned all the time now instead of getting grabbing one on attach and
releasing it at detach, i.e. they stop floating around at the usb bus.

The change also allows to simplify usb-hub.  It doesn't need the
handle_attach() callback any more to configure the downstream ports.
This can be done at device initialitation time now.  The changed
initialization order (first grab upstream port, then register downstream
ports) also fixes some icky corner cases.  For example it is not possible
any more to plug the hub into one of its own downstream ports.

The usb host adapters must care too.  USBPort->dev being non-NULL
doesn't imply any more the device is in attached state.  The host
adapters must additionally check the USBPort->dev->attached flag.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-09-07 09:58:26 +02:00
Gerd Hoffmann 2fe80192ba usb-ehci: handle siTDs
This patch adds code to do minimal siTD handling, which is basically
just following the next pointer.  This is good enougth to handle the
inactive siTDs used by FreeBSD.  Active siTDs are skipped too as we
don't have split transfer support in qemu, additionally a warning is
printed.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-09-07 09:58:16 +02:00
Anthony Liguori 7267c0947d Use glib memory allocation and free functions
qemu_malloc/qemu_free no longer exist after this commit.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-20 23:01:08 -05:00
Avi Kivity e824b2cc3b pci: rename pci_register_bar_region() to pci_register_bar()
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-08 10:22:30 -05:00
Avi Kivity e57964f5b3 ehci: convert to memory API
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-08 10:22:30 -05:00
Gerd Hoffmann 0ce668bc52 ehci: iovec support, remove buffer
Map guest memory and pass on a direct pointer instead of copying
the bits to a indirect buffer.  EHCI transfer descriptors can
reference multiple (physical guest) pages so we'll actually start
seeing usb packets wich carry iovec with more than one element.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-08-04 15:51:30 +02:00
Gerd Hoffmann 4f4321c11f usb: use iovecs in USBPacket
Zap data pointer from USBPacket, add a QEMUIOVector instead.
Add a bunch of helper functions to manage USBPacket data.
Switch over users to the new interface.

Note that USBPacket->len was used for two purposes:  First to
pass in the buffer size and second to return the number of
transfered bytes or the status code on async transfers.  There
is a new result variable for the latter.  A new status code
was added to catch uninitialized result.

Nobody creates iovecs with more than one element (yet).
Some users are (temporarely) limited to iovecs with a single
element to keep the patch size as small as possible.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-08-04 15:51:22 +02:00
Gerd Hoffmann 9490fb0624 ehci doesn't support migration
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-20 14:49:41 +02:00
Gerd Hoffmann 3028376ea0 ehci: add ich9 controller.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-05 15:09:02 +02:00
Gerd Hoffmann 5cc194caeb ehci: fix port count.
The ICH4 EHCI controller which we emulate has six ports not four.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-05 15:09:02 +02:00
Hans de Goede a0a3167a91 usb-ehci: Add support for registering companion controllers
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-05 15:09:02 +02:00
Hans de Goede fbd97532d2 usb-ehci: Fix handling of PED and PEDC port status bits
The PED bit should only be set for highspeed devices and the PEDC bit
should not be set on "normal" PED bit changes, only on io errors.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-05 15:09:02 +02:00
Hans de Goede fbf9db6457 usb-ehci: cleanup port reset handling
Doing a usb_attach when dev is NULL will just result in the
port detach op getting called even though nothing was connected in
the first place.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-05 15:09:02 +02:00
Hans de Goede c44fd61c0f usb-ehci: Connect Status bit is read only, don't allow changing it by the guest
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-05 15:09:02 +02:00
Hans de Goede 053f9fcfb1 usb-ehci: drop unused num-ports state member
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-05 15:09:02 +02:00
Hans de Goede 4706ab6cc0 usb: Replace device_destroy bus op with a child_detach port op
Note this fixes 2 things in one go, first of all the device_destroy bus
op should be a device_detach bus op, as pending async packets from the
device should be cancelled on detach not on destroy.

Secondly having this as a bus op won't work with companion controllers, since
then there will be 1 bus driven by the ehci controller and thus 1 set of bus
ops, but the device being detached may be downstream of a handed over port.
Making the detach of a downstream device a port op allows the ehci controller
to forward this to the companion controller port for handed over ports.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-05 15:09:02 +02:00
Hans de Goede d47e59b8b8 usb: Make port wakeup and complete ops take a USBPort instead of a Device
This makes them consistent with the attach and detach ops, and in general
it makes sense to make portops take a port as argument. This also makes
adding support for a companion controller easier / cleaner.

[ kraxel: fix usb-musb.c build ]

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-05 15:09:02 +02:00
Hans de Goede 3631e6c8c2 usb: Move (initial) call of usb_port_location to usb_fill_port
Cleanup / preparation patch for companion controller support. Note that
as a "side-effect" this patch also fixes the milkymist-softusb controller
not having a port_location set for its ports.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-05 15:09:02 +02:00
Gerd Hoffmann adddecb169 ehci: switch to nanoseconds
Make ehci use nanoseconds everywhere.
Simplifies time calculations.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-23 11:28:06 +02:00
Gerd Hoffmann 16a2dee6b9 ehci: add freq + maxframes properties
Add properties for the wakeup rate and the max number of frames ehci
will process at once.

The wakeup rate defaults to 1000 which equals the usb frame rate.  This
can be reduced to make qemu wake up less often when ehci is active.

In case the wakeup rate is reduced or the ehci timer is delayed due to
latency issues elsewhere in qemu ehci will process multiple frames at
once.  The maxframes property specifies the upper limit for this.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-23 11:28:06 +02:00
Anthony Liguori fdba9594df Merge remote-tracking branch 'mst/for_anthony' into staging
Conflicts:
	hw/usb-uhci.c
2011-06-22 07:11:09 -05:00
Michael S. Tsirkin 9047c0b406 usb-ehci: move device/vendor/class id to qdev
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-06-15 18:32:08 +03:00
Brad Hards 4001f22ffd usb: Use defines for serial bus release number register for EHCI
Signed-off-by: Brad Hards <bradh@frogmouth.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:56:50 +02:00
Gerd Hoffmann 025b168ca6 usb-ehci: split trace calls to handle arg count limits
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:56:49 +02:00
Gerd Hoffmann e654887f38 usb-ehci: itd handling fixes.
This patch fixes a bunch of issues in the itd descriptor handling.
Most important fix is to handle transfers which cross page borders
correctly by looking up the address of the next page.  Luckily the
linux uses physically contigous memory so the data used to hits the
correct location even with this bug instead of corrupting guest
memory.  Also the transfer length updates for outgoing transfers wasn't
correct.

While being at it DPRINTFs have been replaced by tracepoints.

The isoch_pause logic has been disabled.  Not clear to me which propose
this serves and I think it is incorrect too as we just skip processing
itds.  Even when no xfer happens we have to clear the active bit.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:56:49 +02:00
Gerd Hoffmann d05393071a usb-ehci: drop EXECUTING checks.
The state machine doesn't stop in EXECUTING state any more when async
packets are in flight, so the checks are not needed any more and can
be dropped.

Also kick out the check for the frame timer.  As we don't stop & sleep
any more on async packets this is obsolete.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:56:49 +02:00
Gerd Hoffmann 07771f6fce usb: cancel async packets on unplug
This patch adds USBBusOps struct with (for now) only a single callback
which is called when a device is about to be destroyed.  The USB Host
adapters are implementing this callback and use it to cancel any async
requests which might be in flight before the device actually goes away.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:56:49 +02:00
Hans de Goede 8e4faf3de9 ehci: fix a number of unused-but-set-variable warnings (new with gcc-4.6)
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:56:48 +02:00
Gerd Hoffmann d2bd525fbb usb-ehci: fix error handling.
Set the correct bits for nodev, stall and babble errors.
Raise errint irq.  Fix state transition from WRITEBACK
to the next state.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:56:48 +02:00
Gerd Hoffmann ba7cb5a86a usb-ehci: fix offset writeback in ehci_buffer_rw
Two bugs at once:

First the mask is backwards, so the it used to keeps the offset and
clears the page address, which is not what we need when we update the
offset.

Second the offset calculation is wrong in case head isn't page aligned.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:56:48 +02:00
Gerd Hoffmann 8ac6d699c4 usb-ehci: multiqueue support
This patch adds support for keeping multiple queues going at the same
time.  One slow device will not affect other devices any more.

The patch adds code to manage EHCIQueue structs.  It also does a number
of changes to the state machine:

 * The state machine will never ever stop in EXECUTING any more.
   Instead it will continue with the next queue (aka HORIZONTALQH) when
   the usb device returns USB_RET_ASYNC.
 * The state machine will stop processing when it figures it walks in
   circles (easy to figure now that we have a EHCIQueue struct for each
   QH we've processed).  The bailout logic should not be needed any
   more.  For now it is still in, but will assert() in case it triggers.
 * The state machine will just skip queues with a async USBPacket in
   flight.
 * The state machine will resume processing as soon as the async
   USBPacket is finished.

The patch also takes care to flush the QH struct back to guest memory
when needed, so we don't get stale data when (re-)loading it from guest
memory in FETCHQH state.

It also makes the writeback code to not touch the first three dwords of
the QH struct as the EHCI must not write them.  This actually fixes a
bug where QH chaining changes (next ptr) by the linux ehci driver where
overwritten by the emulated EHCI.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:56:40 +02:00
Gerd Hoffmann 0122f47279 usb-ehci: add queue data struct
Add EHCIQueue struct, move the fields needed to track the queue state
into that struct.  Pass the new struct instead of ehci state down to
functions which handle the queue state.  Lot of variable references have
changed due to that without an actual functional change.

Replace fetch_addr with two variables, one for async and one for
periodic schedule.  Add functions to get and set the fetch address.

Use EHCIQueue->usb_status (old name: EHCIState->exec_status) directly in
ehci_execute_complete instead of passing around the status using a
parameters and the return value.

ehci_state_fetchqh returns a EHCIQueue struct now.

No change in behavior.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:36:29 +02:00
Gerd Hoffmann f2c88dc10e usb-ehci: trace buffer copy
Add a trace point for buffer copies and drop the DPRINTF's.

No change in behavior.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:36:29 +02:00
Gerd Hoffmann c4f8e21165 usb-ehci: improve mmio tracing
Add a separate tracepoint to log how register values change in response
to a mmio write.  Especially useful for registers which have read-only
or clear-on-write bits in them.

No change in behavior.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:36:28 +02:00
Gerd Hoffmann dcbd0b5c0e usb-ehci: trace port state
Trace usb port operations (attach, detach, reset),
drop a few obsolete DPRINTF's.

No change in behavior.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:36:28 +02:00
Gerd Hoffmann 26d53979db usb-ehci: trace state machine changes
Add functions to get and set the current state of the state machine,
add tracepoints there to trace state transitions.  Add support for
traceing the queue heads and transfer descriptors as we look at them.

Drop a few DPRINTFs and all DPRINTF_ST lines, they are obsolete now.

No change in behavior.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:36:28 +02:00
Gerd Hoffmann 439a97ccab usb-ehci: trace mmio and usbsts
This patch starts adding trace support to ehci.  It traces
updates of the status register (USBSTS), mmio access and
controller reset.

It also adds functions to set and clear status register bits
and puts them in use everywhere.

Some DPRINTF's are dropped in favor of the new tracepoints.

No change in behavior.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:36:28 +02:00
Gerd Hoffmann 94527ead7e usb: add ehci adapter
This patch finally merges the EHCI host adapter aka USB 2.0 support.

Based on the ehci bits collected @ git://git.kiszka.org/qemu.git ehci

EHCI has a long out-of-tree history.  Project was started by Mark
Burkley, with contributions by Niels de Vos.  David S. Ahern continued
working on it.  Kevin Wolf, Jan Kiszka and Vincent Palatin contributed
bugfixes.

/me (Gerd Hoffmann) picked it up where it left off, prepared the code
for merge, fixed a few bugs and added basic user docs.

Cc: David S. Ahern <daahern@cisco.com>
Cc: Jan Kiszka <jan.kiszka@web.de>
Cc: Kevin Wolf <mail@kevin-wolf.de>
Cc: Vincent Palatin <vincent.palatin_qemu@m4x.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-05-26 11:57:09 +02:00