Add the ability for shell script tests to exclude specific
protocols. This is useful to allow all protocols except ones known to
not support a feature used in the test (e.g. .bdrv_create).
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since test 137 make uses of qcow2.py, only local files are supported.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
CIRRUS_BLTMODE_MEMSYSSRC blits do NOT check blit destination
and blit width, at all. Oops. Fix it.
Security impact: high.
The missing blit destination check allows to write to host memory.
Basically same as CVE-2014-8106 for the other blit variants.
Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Introduce support for emulating the MIPS Boston development board. The
Boston board is built around an FPGA & 3 PCIe controllers, one of which
is connected to an Intel EG20T Platform Controller Hub. It is used
during the development & debug of new CPUs and the software intended to
run on them, and is essentially the successor to the older MIPS Malta
board.
This patch does not implement the EG20T, instead connecting an already
supported ICH-9 AHCI controller. Whilst this isn't accurate it's enough
for typical stock Boston software (eg. Linux kernels) to work with hard
disks given that both the ICH-9 & EG20T implement the AHCI
specification.
Boston boards typically boot kernels in the FIT image format, and this
patch will treat kernels provided to QEMU as such. When loading a kernel
directly, the board code will generate minimal firmware much as the
Malta board code does. This firmware will set up the CM, CPC & GIC
register base addresses then set argument registers & jump to the kernel
entry point. Alternatively, bootloader code may be loaded using the bios
argument in which case no firmware will be generated & execution will
proceed from the start of the boot code at the default MIPS boot
exception vector (offset 0x1fc00000 into (c)kseg1).
Currently real Boston boards are always used with FPGA bitfiles that
include a Global Interrupt Controller (GIC), so the interrupt
configuration is only defined for such cases. Therefore the board will
only allow use of CPUs which implement the CPS components, including the
GIC, and will otherwise exit with a message.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
[yongbok.kim@imgtec.com:
isolated boston machine support for mips64el.
updated for recent Chardev changes.
ignore missing bios/kernel for qtest.
added default -drive to if=ide explicitly.
changed default memory size into 1G due to make check failure
on 32-bit hosts]
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
This enables the multi-threaded system emulation by default for ARMv7
and ARMv8 guests using the x86_64 TCG backend. This is because on the
guest side:
- The ARM translate.c/translate-64.c have been converted to
- use MTTCG safe atomic primitives
- emit the appropriate barrier ops
- The ARM machine has been updated to
- hold the BQL when modifying shared cross-vCPU state
- defer powerctl changes to async safe work
All the host backends support the barrier and atomic primitives but
need to provide same-or-better support for normal load/store
operations.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
The arm_reset_cpu/set_cpu_on/set_cpu_off() functions do their work
asynchronously in the target vCPUs context. As a result we need to
ensure the SRC_SCR reset bits correctly report the reset status at the
right time. To do this we defer the clearing of the bit with an async
job which will run after the work queued by ARM powerctl functions.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Previously flushes on other vCPUs would only get serviced when they
exited their TranslationBlocks. While this isn't overly problematic it
violates the semantics of TLB flush from the point of view of source
vCPU.
To solve this we call the cputlb *_all_cpus_synced() functions to do
the flushes which ensures all flushes are completed by the time the
vCPU next schedules its own work. As the TLB instructions are modelled
as CP writes the TB ends at this point meaning cpu->exit_request will
be checked before the next instruction is executed.
Deferring the work until the architectural sync point is a possible
future optimisation.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
The WFE and YIELD instructions are really only hints and in TCG's case
they were useful to move the scheduling on from one vCPU to the next. In
the parallel context (MTTCG) this just causes an unnecessary cpu_exit
and contention of the BQL.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
When switching a new vCPU on we want to complete a bunch of the setup
work before we start scheduling the vCPU thread. To do this cleanly we
defer vCPU setup to async work which will run the vCPUs execution
context as the thread is woken up. The scheduling of the work will kick
the vCPU awake.
This avoids potential races in MTTCG system emulation.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
This introduces support to the cputlb API for flushing all CPUs TLBs
with one call. This avoids the need for target helpers to iterate
through the vCPUs themselves.
An additional variant of the API (_synced) will cause the source vCPUs
work to be scheduled as "safe work". The result will be all the flush
operations will be complete by the time the originating vCPU executes
its safe work. The calling implementation can either end the TB
straight away (which will then pick up the cpu->exit_request on
entering the next block) or defer the exit until the architectural
sync point (usually a barrier instruction).
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The main use case for tlb_reset_dirty is to set the TLB_NOTDIRTY flags
in TLB entries to force the slow-path on writes. This is used to mark
page ranges containing code which has been translated so it can be
invalidated if written to. To do this safely we need to ensure the TLB
entries in question for all vCPUs are updated before we attempt to run
the code otherwise a race could be introduced.
To achieve this we atomically set the flag in tlb_reset_dirty_range and
take care when setting it when the TLB entry is filled.
On 32 bit systems attempting to emulate 64 bit guests we don't even
bother as we might not have the atomic primitives available. MTTCG is
disabled in this case and can't be forced on. The copy_tlb_helper
function helps keep the atomic semantics in one place to avoid
confusion.
The dirty helper function is made static as it isn't used outside of
cputlb.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This converts the remaining TLB flush routines to use async work when
detecting a cross-vCPU flush. The only minor complication is having to
serialise the var_list of MMU indexes into a form that can be punted
to an asynchronous job.
The pending_tlb_flush field on QOM's CPU structure also becomes a
bitfield rather than a boolean.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
While the vargs approach was flexible the original MTTCG ended up
having munge the bits to a bitmap so the data could be used in
deferred work helpers. Instead of hiding that in cputlb we push the
change to the API to make it take a bitmap of MMU indexes instead.
For ARM some the resulting flushes end up being quite long so to aid
readability I've tended to move the index shifting to a new line so
all the bits being or-ed together line up nicely, for example:
tlb_flush_page_by_mmuidx(other_cs, pageaddr,
(1 << ARMMMUIdx_S1SE1) |
(1 << ARMMMUIdx_S1SE0));
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
[AT: SPARC parts only]
Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
[PM: ARM parts only]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Some architectures allow to flush the tlb of other VCPUs. This is not a problem
when we have only one thread for all VCPUs but it definitely needs to be an
asynchronous work when we are in true multithreaded work.
We take the tb_lock() when doing this to avoid racing with other threads
which may be invalidating TB's at the same time. The alternative would
be to use proper atomic primitives to clear the tlb entries en-mass.
This patch doesn't do anything to protect other cputlb function being
called in MTTCG mode making cross vCPU changes.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
[AJB: remove need for g_malloc on defer, make check fixes, tb_lock]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This moves the helper function closer to where it is called and updates
the error message to report via error_report instead of the deprecated
fprintf.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
For SoftMMU the TLB flushes are an example of a task that can be
triggered on one vCPU by another. To deal with this properly we need to
use safe work to ensure these changes are done safely. The new assert
can be enabled while debugging to catch these cases.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The patch enables handling atomic code in the guest. This should be
preferably done in cpu_handle_exception(), but the current assumptions
regarding when we can execute atomic sections cause a deadlock.
The current mechanism discards the flags which were set in atomic
execution. We ensure they are properly saved by calling the
cc->cpu_exec_enter/leave() functions around the loop.
As we are running cpu_exec_step_atomic() from the outermost loop we
need to avoid an abort() when single stepping over atomic code since
debug exception longjmp will point to the the setlongjmp in
cpu_exec(). We do this by setting a new jmp_env so that it jumps back
here on an exception.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
[AJB: tweak title, merge with new patches, add mmap_lock]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
CC: Paolo Bonzini <pbonzini@redhat.com>
There are a couple of changes that occur at the same time here:
- introduce a single vCPU qemu_tcg_cpu_thread_fn
One of these is spawned per vCPU with its own Thread and Condition
variables. qemu_tcg_rr_cpu_thread_fn is the new name for the old
single threaded function.
- the TLS current_cpu variable is now live for the lifetime of MTTCG
vCPU threads. This is for future work where async jobs need to know
the vCPU context they are operating in.
The user to switch on multi-thread behaviour and spawn a thread
per-vCPU. For a simple test kvm-unit-test like:
./arm/run ./arm/locking-test.flat -smp 4 -accel tcg,thread=multi
Will now use 4 vCPU threads and have an expected FAIL (instead of the
unexpected PASS) as the default mode of the test has no protection when
incrementing a shared variable.
We enable the parallel_cpus flag to ensure we generate correct barrier
and atomic code if supported by the front and backends. This doesn't
automatically enable MTTCG until default_mttcg_enabled() is updated to
check the configuration is supported.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[AJB: Some fixes, conditionally, commit rewording]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
tb_lock() has long been used for linux-user mode to protect code
generation. By enabling it now we prepare for MTTCG and ensure all code
generation is serialised by this lock. The other major structure that
needs protecting is the l1_map and its PageDesc structures. For the
SoftMMU case we also use tb_lock() to protect these structures instead
of linux-user mmap_lock() which as the name suggests serialises updates
to the structure as a result of guest mmap operations.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
There are now only two uses of the global exit_request left.
The first ensures we exit the run_loop when we first start to process
pending work and in the kick handler. This is just as easily done by
setting the first_cpu->exit_request flag.
The second use is in the round robin kick routine. The global
exit_request ensured every vCPU would set its local exit_request and
cause a full exit of the loop. Now the iothread isn't being held while
running we can just rely on the kick handler to push us out as intended.
We lightly re-factor the main vCPU thread to ensure cpu->exit_requests
cause us to exit the main loop and process any IO requests that might
come along. As an cpu->exit_request may legitimately get squashed
while processing the EXCP_INTERRUPT exception we also check
cpu->queued_work_first to ensure queued work is expedited as soon as
possible.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This finally allows TCG to benefit from the iothread introduction: Drop
the global mutex while running pure TCG CPU code. Reacquire the lock
when entering MMIO or PIO emulation, or when leaving the TCG loop.
We have to revert a few optimization for the current TCG threading
model, namely kicking the TCG thread in qemu_mutex_lock_iothread and not
kicking it in qemu_cpu_kick. We also need to disable RAM block
reordering until we have a more efficient locking mechanism at hand.
Still, a Linux x86 UP guest and my Musicpal ARM model boot fine here.
These numbers demonstrate where we gain something:
20338 jan 20 0 331m 75m 6904 R 99 0.9 0:50.95 qemu-system-arm
20337 jan 20 0 331m 75m 6904 S 20 0.9 0:26.50 qemu-system-arm
The guest CPU was fully loaded, but the iothread could still run mostly
independent on a second core. Without the patch we don't get beyond
32206 jan 20 0 330m 73m 7036 R 82 0.9 1:06.00 qemu-system-arm
32204 jan 20 0 330m 73m 7036 S 21 0.9 0:17.03 qemu-system-arm
We don't benefit significantly, though, when the guest is not fully
loading a host CPU.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Message-Id: <1439220437-23957-10-git-send-email-fred.konrad@greensocs.com>
[FK: Rebase, fix qemu_devices_reset deadlock, rm address_space_* mutex]
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
[EGC: fixed iothread lock for cpu-exec IRQ handling]
Signed-off-by: Emilio G. Cota <cota@braap.org>
[AJB: -smp single-threaded fix, clean commit msg, BQL fixes]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
[PM: target-arm changes]
Acked-by: Peter Maydell <peter.maydell@linaro.org>
..and make the definition local to cpus. In preparation for MTTCG the
concept of a global tcg_current_cpu will no longer make sense. However
we still need to keep track of it in the single-threaded case to be able
to exit quickly when required.
qemu_cpu_kick_no_halt() moves and becomes qemu_cpu_kick_rr_cpu() to
emphasise its use-case. qemu_cpu_kick now kicks the relevant cpu as
well as qemu_kick_rr_cpu() which will become a no-op in MTTCG.
For the time being the setting of the global exit_request remains.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
Currently we rely on the side effect of the main loop grabbing the
iothread_mutex to give any long running basic block chains a kick to
ensure the next vCPU is scheduled. As this code is being re-factored and
rationalised we now do it explicitly here.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
We know there will be cases where MTTCG won't work until additional work
is done in the front/back ends to support. It will however be useful to
be able to turn it on.
As a result MTTCG will default to off unless the combination is
supported. However the user can turn it on for the sake of testing.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
[AJB: move to -accel tcg,thread=multi|single, defaults]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
We'll be using the memory ordering definitions to define values for
both the host and guest. To avoid fighting with circular header
dependencies just move these types into their own minimal header.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The recent patch enabling lock assertions uncovered the missing lock
acquisition in cpu_exec_step(). This patch adds them.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Enable tcg lock debug asserts in a debug build by default instead of
relying on DEBUG_LOCKING. None of the other DEBUG_* macros have
asserts, so this patch removes DEBUG_LOCKING and enable these asserts
in a debug build.
CC: Richard Henderson <rth@twiddle.net>
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
[AJB: tweak ifdefs so can be early in series]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This documents the current design for upgrading TCG emulation to take
advantage of modern CPUs by running a thread-per-CPU. The document goes
through the various areas of the code affected by such a change and
proposes design requirements for each part of the solution.
The text marked with (Current solution[s]) to document what the current
approaches being used are.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This pull request has:
* Yet more POWER9 instruction implementations
* Some extensions to the softfloat code which are necesssary for
some of those instructions
* Some preliminary patches in preparation for POWER9 softmmu
implementation
* Igor Mammedov's cleanups to unify hotplug cpu handling across
architectures
* Assorted bugfixes
The softfloat and cpu hotplug changes aren't entirely ppc specific (in
fact the hotplug stuff contains some pc specific patches). However
they're included here because ppc is one of the main beneficiaries,
and the series depend on some ppc specific patches.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=bsJJ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.9-20170222' into staging
ppc patch queue for 2017-02-22
This pull request has:
* Yet more POWER9 instruction implementations
* Some extensions to the softfloat code which are necesssary for
some of those instructions
* Some preliminary patches in preparation for POWER9 softmmu
implementation
* Igor Mammedov's cleanups to unify hotplug cpu handling across
architectures
* Assorted bugfixes
The softfloat and cpu hotplug changes aren't entirely ppc specific (in
fact the hotplug stuff contains some pc specific patches). However
they're included here because ppc is one of the main beneficiaries,
and the series depend on some ppc specific patches.
# gpg: Signature made Wed 22 Feb 2017 06:29:47 GMT
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.9-20170222: (43 commits)
hw/ppc/ppc405_uc.c: Avoid integer overflows
hw/ppc/spapr: Check for valid page size when hot plugging memory
target-ppc: fix Book-E TLB matching
hw/net/spapr_llan: 6 byte mac address device tree entry
machine: replace query_hotpluggable_cpus() callback with has_hotpluggable_cpus flag
machine: unify [pc_|spapr_]query_hotpluggable_cpus() callbacks
spapr: reuse machine->possible_cpus instead of cores[]
change CPUArchId.cpu type to Object*
pc: pass apic_id to pc_find_cpu_slot() directly so lookup could be done without CPU object
pc: calculate topology only once when possible_cpus is initialised
pc: move pcms->possible_cpus init out of pc_cpus_init()
machine: move possible_cpus to MachineState
hw/pci-host/prep: Do not use hw_error() in realize function
target/ppc/POWER9: Direct all instr and data storage interrupts to the hypv
target/ppc/POWER9: Adapt LPCR handling for POWER9
target/ppc/POWER9: Add ISAv3.00 MMU definition
target/ppc: Fix LPCR DPFD mask define
target-ppc: Add xscvqpudz and xscvqpuwz instructions
target-ppc: Implement round to odd variants of quad FP instructions
softfloat: Add float128_to_uint32_round_to_zero()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For TIC CCW, bit positions 8-32 of the format-1 CCW must contain zeros;
otherwise, a program-check condition is generated. For format-0 TIC CCWs,
bits 32-63 are ignored.
To convert TIC from format-0 CCW to format-1 CCW correctly, let's clear
bits 8-32 to guarantee compatibility.
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
we need to pass the cpuid into the pid field of the notes
section, otherwise the notes for different CPUs all have 0:
e.g. objdump -h shows:
old:
5 .reg-s390-prefix/0 00000004 0000000000000000 0000000000000000
6 .reg-s390-prefix 00000004 0000000000000000 0000000000000000
21 .reg-s390-prefix/0 00000004 0000000000000000 0000000000000000
new:
5 .reg-s390-prefix/1 00000004 0000000000000000 0000000000000000
6 .reg-s390-prefix 00000004 0000000000000000 0000000000000000
21 .reg-s390-prefix/2 00000004 0000000000000000 0000000000000000
Reported-by: Philipp Rudo <prudo@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
In binutils/libbfd (bfd/elf.c) it is enforced that all s390
specific ELF notes like e.g. NT_S390_PREFIX or NT_S390_CTRS
have "LINUX" specified as note name and that the namesz is
6. Otherwise the notes are ignored.
QEMU currently uses "CORE" for these notes. Up to now this has
not been a real problem because the dump analysis tool "crash"
does handle that. But it will break all programs that use libbfd
for processing ELF notes.
So fix this and use "LINUX" for all s390 specific notes to comply
with libbfd. Also set the correct namesz.
Reported-by: Philipp Rudo <prudo@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The maximal number of virtqueues per device can be limited on a per
transport basis. For virtio-ccw this limit is defined by
VIRTIO_CCW_QUEUE_MAX, however the limitation used to come form the
number of adapter routes supported by flic (via notifiers).
Recently the limitation of the flic was adjusted so that it can
accommodate VIRTIO_QUEUE_MAX queues, and is in the meanwhile checked for
separately too.
Let us remove the transport specific limitation of virtio-ccw by
dropping VIRTIO_CCW_QUEUE_MAX and using VIRTIO_QUEUE_MAX instead.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let's increase ADAPTER_ROUTES_MAX_GSI to VIRTIO_QUEUE_MAX which is the
largest demand foreseeable at the moment. Let us add a compatibility
macro for the previous machines so client code can maintain backwards
migration compatibility
To not mess up migration compatibility for virtio-ccw
VIRTIO_CCW_QUEUE_MAX is left at it's current value, and will be dropped
when virtio-ccw is converted to use the capability of the flic
introduced by this patch.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Currently VIRTIO_CCW_QUEUE_MAX is defined as ADAPTER_ROUTES_MAX_GSI.
That is when checking queue max we implicitly check the constraint
concerning the number of adapter routes. This won't be satisfactory any
more (due to backward migration considerations) if ADAPTER_ROUTES_MAX_GSI
changes (ADAPTER_ROUTES_MAX_GSI is going to change because we want to
support up to VIRTIO_QUEUE_MAX queues per virtio-ccw device).
Let us introduce a check on a recently introduce flic property which
gives us the compatibility machine aware limit on adapter routes.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
To make virtio-ccw supports more that 64 virtqueues we will have to
increase ADAPTER_ROUTES_MAX_GSI which is currently limiting the number if
possible adapter routes. Of course increasing the number of supported
routes can break backwards migration.
Let us introduce a compatibility property adapter_routes_max_batch so
client code can use the some old limit if in compatibility mode and
retain the migration compatibility.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
We cannot support more than 64 virtqueues with the 64 bits provided by
classic indicators. If a driver tries to setup classic indicators
(which it is free to do even for virtio-1 devices) for a device with
more than 64 virtqueues, we should reject the attempt so that the
driver does not end up with an unusable device.
This is in preparation for bumping the number of supported virtqueues
on the ccw transport.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Wire up virtio-crypto for the CCW based VIRTIO.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
As a preparation for wiring-up virtio-crypto, the first non-transitional
virtio device on the ccw transport, let us introduce a mechanism for
disabling revision 0. This is more or less equivalent with disabling
legacy as revision 0 is legacy only, and legacy drivers use the revision
0 exclusively.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Current code puts a 'FLIC_FAILED' marker into the migration stream
to indicate something went wrong while saving flic state and fails
load if it encounters that marker. VMState's put routine recently
gained the ability to return error codes (but did not wire it up
yet).
In order to be able to reap the benefits of returning an error and
failing migration on the source already once this gets wired up
in core, return an error in addition to storing 'FLIC_FAILED'.
Suggested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Sometimes (e.g. early boot) a guest is broken in such ways that it loops
100% delivering operation exceptions (illegal operation) but the pgm new
PSW is not set properly. This will result in code being read from
address zero, which usually contains another illegal op. Let's detect
this case and put the guest in crashed state. Instead of only detecting
this for address zero apply a heuristic that will work for any program
check new psw so that it will also reach the crashed state if you
provide some random elf file to the -kernel option.
We do not want guest problem state to be able to trigger a guest panic,
e.g. by faulting on an address that is the same as the program check
new PSW, so we check for the problem state bit being off.
With this we
a: get rid of CPU consumption of such broken guests
b: keep the program old PSW. This allows to find out the original illegal
operation - making debugging such early boot issues much easier than
with single stepping
This relies on the kernel using a similar heuristic and passing such
operation exceptions to user space.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The DPRINTF approach is likely to introduce bitrot, and the preferred
way for debugging is tracing anyway. Fortunately, there are no users
(left), so nuke it.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Python is no longer installed implicitly, but the QEMU build system
requires it. List it in PACKAGES.
Reported-by: Auger Eric <eric.auger@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170222021801.28658-1-famz@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
The docker framework is really just another piece in the build
automation puzzle so lets merge it together. For added bonus I've also
included the Travis and Patchew status links. The Shippable links will
be added later once mainline tests have been configured and setup.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170220105139.21581-5-alex.bennee@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Ostensibly Shippable offers a similar set of services as Travis.
However they are focused on Docker container based work-flows so we
can use our existing containers to run a few extra builds - in this
case a bunch of cross-compiled targets on a Debian multiarch system.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170220105139.21581-4-alex.bennee@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
This provides a basic Debian install with access to the emdebian cross
compilers. The debian-armhf-cross and debian-arm64-cross targets build
on the basic Debian image to allow cross compiling to those targets.
A new environment variable (QEMU_CONFIGURE_OPTS) is set as part of the
docker container and passed to the build to specify the
--cross-prefix. The user still calls the build in the usual way, for
example:
make docker-test-build@debian-arm64-cross \
TARGET_LIST="aarch64-softmmu,aarch64-linux-user"
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170220105139.21581-3-alex.bennee@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Currently all docker builds are done by exporting a tarball to the
docker container and running the build as the containers root user.
Other use cases are possible however and it is possible to map a part
of users file-system to the container. This is useful for example for
doing cross-builds of arbitrary source trees. For this to work
smoothly the container needs to have a user created that maps cleanly
to the host system.
This adds a -u option to the docker script so that:
DEB_ARCH=armhf DEB_TYPE=stable ./tests/docker/docker.py build \
-u --include-executable=arm-linux-user/qemu-arm \
debian:armhf ./tests/docker/dockerfiles/debian-bootstrap.docker
Will build a container that can then be run like:
docker run --rm -it -v /home/alex/lsrc/qemu/risu.git/:/src \
--user=alex:alex -w /src/ debian:armhf \
sh -c "make clean && ./configure -s && make"
All docker containers built will add the current user unless
explicitly disabled by specifying NOUSER when invoking the Makefile:
make docker-image-debian-armhf-cross NOUSER=1
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Fam Zheng <famz@redhat.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170220105139.21581-2-alex.bennee@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
