IF_NONE allows read-only, which makes forbidding it in this place
for other types pretty much pointless.
Instead, make sure that all devices for which the check would have
errored out check in their init function that they don't get a read-only
BlockDriverState. This catches even cases where IF_NONE and -device is
used.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
ATM we set AHCI mode on 1st GHC write.
Spec says we should set it on reset.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
# By Matthew Daley (1) and Roger Pau Monné (1)
# Via Stefano Stabellini
* sstabellini/xen-2013-10-10:
qemu/xen: make use of xenstore relative paths
xen_disk: mark ioreq as mapped before unmapping in error case
# By Asias He (1) and Peter Lieven (1)
# Via Paolo Bonzini
* bonzini/scsi-next:
scsi: Allocate SCSITargetReq r->buf dynamically [CVE-2013-4344]
block/iscsi: reenable iscsi_co_get_block_status
Message-id: 1381332391-8781-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Qemu has several hardcoded xenstore paths that are only valid on Dom0.
Attempts to launch a Qemu instance (to act as a userspace backend for
PV disks) will fail because Qemu is not able to access those paths
when running on a domain different than Dom0.
Instead make the xenstore paths relative to the domain where Qemu is
actually running.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Cc: xen-devel@lists.xenproject.org
Cc: Anthony PERARD <anthony.perard@citrix.com>
Commit 4472beae modified the semantics of ioreq_{un,}map so that they are
idempotent if called when they're not needed (ie., twice in a row). However,
it neglected to handle the case where batch mapping is not being used (the
default), and one of the grants fails to map. In this case, ioreq_unmap will
be called to unwind and unmap any mappings already performed, but ioreq_unmap
simply returns due to the aforementioned change (the ioreq has not already
been marked as mapped).
The frontend user can therefore force xen_disk to leak grant mappings, a
per-domain limited resource.
Fix by marking the ioreq as mapped before calling ioreq_unmap in this
situation.
Signed-off-by: Matthew Daley <mattjd@gmail.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
r->buf is hardcoded to 2056 which is (256 + 1) * 8, allowing 256 luns at
most. If more than 256 luns are specified by user, we have buffer
overflow in scsi_target_emulate_report_luns.
To fix, we allocate the buffer dynamically.
Signed-off-by: Asias He <asias@redhat.com>
Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If there is no operation driver for the xattr type the
functions return '-1' and set errno to '-EOPNOTSUPP'.
When the calling code sets 'ret = -errno' this turns
into a large positive number.
In Linux 3.11, the kernel has switched to using 9p
version 9p2000.L, instead of 9p2000.u, which enables
support for xattr operations. This on its own is harmless,
but for another change which makes it request the xattr
with a name 'security.capability'.
The result is that the guest sees a succesful return
of 95 bytes of data, instead of a failure with errno
set to 95. Since the kernel expects a maximum of 20
bytes for an xattr return this gets translated to the
unexpected errno ERANGE.
This all means that when running a binary off a 9p fs
in 3.11 kernels you get a fun result of:
# ./date
sh: ./date: Numerical result out of range
The only workaround is to pass 'version=9p2000.u' when
mounting the 9p fs in the guest, to disable all use of
xattrs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Device communication errors need to be reported to driver.
Add a debug message while at it.
Signed-off-by: Jan Vesely <jano.vesely@gmail.com>
Acked-by: Gerd Hoffmann <kraxel@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
With Linux kernel version 3.3 or later, qemu fails with the following message:
sh_serial: unsupported read from 0x18
Aborted
Reported-and-analyzed-by: Rob Landley <rob@landley.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
From buildbot default_i386_rhel61:
CC alpha-softmmu/hw/alpha/typhoon.o
hw/alpha/typhoon.c: In function 'typhoon_translate_iommu':
hw/alpha/typhoon.c:703: warning: integer constant is too large for 'long' type
hw/alpha/typhoon.c:703: warning: integer constant is too large for 'long' type
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This includes pc and pci cleanups and enhancements,
and a virtio-net bugfix related to softmac programming.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)
iQEcBAABAgAGBQJSR83kAAoJECgfDbjSjVRpX08H/jKgYBNJaChev1TROIVHEGbu
IzvkjfocvKO+6wmhOf5x+xwFmzrijUMa1CPvOkCp8c2A3Iek7rmnedknlhXYh7dM
z5mXcvFGjnu7ST38ydF/Emk9+Z6rRg5Y/hkmlDyr+9lNcoiCDLXXcUrKjeIHNoWl
e8w3yiPCJ528QyrLwQ890XetJphv67pMlsjMgLQ2betMk++Ac/ctUf1D2p1X4NeQ
Q2drbo5Z4yDk0i6QMA3iLq1Bh/AhE10bCDq9rCzfZGIKVyncL6ne2pSi/xDvpLrF
dmxoiJ5QrK6xLnagCcn5T6SB9DkwbEPdL7qCqlxZ8USr7cVyPdzYtHtGSBWdeXY=
=xF01
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pc,pci,virtio fixes and cleanups
This includes pc and pci cleanups and enhancements,
and a virtio-net bugfix related to softmac programming.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Sun 29 Sep 2013 01:51:16 AM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Michael S. Tsirkin (8) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
smbios: Factor out smbios_maybe_add_str()
smbios: Make multiple -smbios type= accumulate sanely
smbios: Improve diagnostics for conflicting entries
smbios: Convert to QemuOpts
smbios: Normalize smbios_entry_add()'s error handling to exit(1)
virtio-net: fix up HMP NIC info string on reset
pci: remove explicit check to 64K ioport size
piix4: disable io on reset
piix: use 64 bit window programmed by guest
q35: use 64 bit window programmed by guest
pci: add helper to retrieve the 64-bit range
range: add min/max operations on ranges
range: add Range to typedefs
q35: make pci window address/size match guest cfg
Message-id: 1380437951-21788-1-git-send-email-mst@redhat.com
# By Bandan Das (3) and Gerd Hoffmann (1)
# Via Gerd Hoffmann
* kraxel/audio.1:
audio: remove CONFIG_MIXEMU configure option
hda-codec: make mixemu selectable at runtime
hda-codec: refactor common definitions into a header file
audio maintainers update
Message-id: 1380011943-15083-1-git-send-email-kraxel@redhat.com
contains the fixes from the previous pull request, which did not make
it yet.
Overall it contains
- a fix for kexec without kdump (which uses diag308 subcode 0 instead of 1)
- several sclp related fixes
- some initial sclp migration code
- the sclp line mode console
- A fix for a boot problem with the virtio ccw ipl bios
- zeroed out padding bytes for the notes section of dump-guest-memory
- some cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=4rT1
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'borntraeger/tags/s390-next-20130924' into staging
This is a bunch of fixes/changes for the s390 architecture. It also
contains the fixes from the previous pull request, which did not make
it yet.
Overall it contains
- a fix for kexec without kdump (which uses diag308 subcode 0 instead of 1)
- several sclp related fixes
- some initial sclp migration code
- the sclp line mode console
- A fix for a boot problem with the virtio ccw ipl bios
- zeroed out padding bytes for the notes section of dump-guest-memory
- some cleanups
# gpg: Signature made Tue 24 Sep 2013 02:18:44 AM CDT using RSA key ID B5A61C7C
# gpg: Can't check signature: public key not found
# By Christian Borntraeger (6) and others
# Via Christian Borntraeger
* borntraeger/tags/s390-next-20130924:
s390/sclplmconsole: Add support for SCLP line-mode console
s390/ebcdic: Move conversion tables to header file
s390/eventfacility: allow childs to handle more than 1 event type
s390/eventfacility: remove unused event_type variable
s390/eventfacility: Fix receive/send masks
s390/eventfacility: fix multiple Read Event Data sources
s390/sclp: add reset() functions
s390/sclpquiesce: Add code to support live migration
s390/sclpconsole: Add code to support live migration for sclpconsole
s390/sclpconsole: modify definition of input buffer
s390/kexec: Implement diag308 subcode 0
s390/ioinst: Moved the CC setting to the IO instruction handlers
s390/cpu: Make setcc() function available to other files
s390/ipl: Update the s390-ccw.img rom
s390/ipl: Fix waiting for virtio processing
s390/dump: zero out padding bytes in notes sections
s390/kvm: Add check for priviledged SCLP handler
Message-id: 1380007671-18976-1-git-send-email-borntraeger@de.ibm.com
Currently, -smbios type=T,NAME=VAL,... adds one field (T,NAME) with
value VAL to fw_cfg for each unique NAME. If NAME occurs multiple
times, the last one's VAL is used (before the QemuOpts conversion, the
first one was used).
Multiple -smbios can add multiple fields with the same (T, NAME).
SeaBIOS reads all of them from fw_cfg, but uses only the first field
(T, NAME). The others are ignored.
"First one wins, subsequent ones get ignored silently" isn't nice. We
commonly let the last option win. Useful, because it lets you
-readconfig first, then selectively override with command line
options.
Clean up -smbios to work the common way. Accumulate the settings,
with later ones overwriting earlier ones. Put the result into fw_cfg
(no more useless duplicates).
Bonus cleanup: qemu_uuid_parse() no longer sets SMBIOS system uuid by
side effect.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We allow either tables or fields for the same type. Makes sense,
because SeaBIOS uses fields only when no tables are present.
We do this by searching the SMBIOS blob for a previously added table
or field. Error messages look like this:
qemu-system-x86_64: -smbios type=1,serial=42: SMBIOS type 1 table already defined, cannot add field
User needs to know that "table" is defined by -smbios file=..., and
"field" by -smbios type=...
Instead of searching the blob, record additions of interest, and check
that. Simpler, and makes better error messages possible:
qemu-system-x86_64: -smbios file=smbios_type_1.bin: Can't mix file= and type= for same type
qemu-system-x86_64: -smbios type=1,serial=42,serial=99: This is the conflicting setting
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
So that it can be set in config file for -readconfig.
This tightens parsing of -smbios, and makes it more consistent with
other options: unknown parameters are rejected, numbers with trailing
junk are rejected, when a parameter is given multiple times, last
rather than first wins, ...
MST: drop one chunk to fix build errors
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It exits on all error conditions but one, where it returns -1.
Normalize, and return void.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently Xen hvm s3 has a bug coming from the difference between
qemu-traditioanl and qemu-xen. For qemu-traditional, the way to
resume from hvm s3 is via 'xl trigger' command. However, for
qemu-xen, the way to resume from hvm s3 inherited from standard
qemu, i.e. via QMP, and it doesn't work under Xen.
The root cause is, for qemu-xen, 'xl trigger' command didn't reset
devices, while QMP didn't unpause hvm domain though they did qemu
system reset.
We have two qemu patches and one xl patch to fix Xen hvm s3 bug.
This patch is the qemu patch 1. It adjusts qemu wakeup so that
Xen s3 resume logic (which will be implemented at qemu patch 2)
will be notified after qemu system reset.
Signed-off-by: Liu Jinsong <jinsong.liu@intel.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Define PARAM so that we have two versions of the "desc_codec
and family" structs. Add a property called "mixer" whose default
value depends on whether CONFIG_MIXEMU is defined or not which
will help us call the appropriate instance init functions.
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Move common defines and structs to a header file.
The next commit will include it twice, once for a device with a
mixer, and once for device without a mixer.
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
# By Aurelien Jarno (1) and Vincenzo Maffione (1)
# Via Stefan Hajnoczi
* stefanha/net:
e1000: NetClientInfo.receive_iov implemented
pcnet-pci: mark I/O and MMIO as LITTLE_ENDIAN
Message-id: 1379699613-5338-1-git-send-email-stefanha@redhat.com
# By Stefan Hajnoczi (4) and others
# Via Stefan Hajnoczi
* stefanha/block:
virtio-blk: do not relay a previous driver's WCE configuration to the current
blockdev: do not default cache.no-flush to true
block: don't lose data from last incomplete sector
qcow2: Correct snapshots size for overlap check
coroutine: fix /perf/nesting coroutine benchmark
coroutine: add qemu_coroutine_yield benchmark
qemu-timer: do not take the lock in timer_pending
qemu-timer: make qemu_timer_mod_ns() and qemu_timer_del() thread-safe
qemu-timer: drop outdated signal safety comments
osdep: warn if open(O_DIRECT) on fails with EINVAL
libcacard: link against qemu-error.o for error_report()
Message-id: 1379698931-946-1-git-send-email-stefanha@redhat.com
# By Stefan Weil (8) and others
# Via Michael Tokarev
* mjt/trivial-patches:
tests/.gitignore: ignore test-throttle
exec: Fix broken build for MinGW (regression)
kvm: Fix compiler warning (clang)
tcg-sparc: Fix parenthesis warning
Makefile: Remove some more files when cleaning
target-i386: Fix segment cache dump
iov: avoid "orig_len may be used unitialized" warning
vscclient: remove unnecessary use of uninitialized variable
trace-events: Clean up with scripts/cleanup-trace-events.pl again
tci: Fix qemu-alpha on 32 bit hosts (wrong assertions)
*-user: Improve documentation for lock_user function
MAINTAINERS: Add missing entry to filelist for TCI target
translate-all: Fix formatting of dump output
*-user: Fix typo in comment (ulocking -> unlocking)
docs: Fix IO port number for CPU present bitmap.
q35: Fix typo in constant DEFUALT -> DEFAULT.
configure: Undefine _FORTIFY_SOURCE prior using it
Message-id: 1379696296-32105-1-git-send-email-mjt@msgid.tls.msk.ru
# By Alexey Kardashevskiy (3) and others
# Via Paolo Bonzini
* qemu-kvm/uq/master:
target-i386: add feature kvm_pv_unhalt
linux-headers: update to 3.12-rc1
target-i386: forward CPUID cache leaves when -cpu host is used
linux-headers: update to 3.11
kvm: fix traces to use %x instead of %d
kvmvapic: Clear also physical ROM address when entering INACTIVE state
kvmvapic: Enter inactive state on hardware reset
kvmvapic: Catch invalid ROM size
kvm irqfd: support direct msimessage to irq translation
fix steal time MSR vmsd callback to proper opaque type
kvm: warn if num cpus is greater than num recommended
cpu: Move cpu state syncs up into cpu_dump_state()
exec: always use MADV_DONTFORK
Message-id: 1379694292-1601-1-git-send-email-pbonzini@redhat.com
# By Hervé Poussineau (5) and Stefan Weil (1)
# Via Paolo Bonzini
* bonzini/scsi-next:
block/iscsi: Drop iscsi_co_get_block_status for older versions of libiscsi
lsi: add 53C810 variant
lsi: remove todo
lsi: ignore write accesses to CTEST0 registers
lsi: check ssid versus sdid only if ssid is valid
lsi: use constant name instead of its value
This patch implements the NetClientInfo.receive_iov method for the
e1000 device emulation. In this way a network backend that uses
qemu_sendv_packet() can deliver the fragmented packet without
requiring an additional copy in the frontend/backend network code
(nc_sendv_compat() function).
The existing method NetClientInfo.receive has been reimplemented
using the new method.
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that the memory subsystem is propagating the endianness correctly,
the pcnet-pci device should have its I/O ports and MMIO memory marked
as LITTLE_ENDIAN, as PCI devices are little endian.
This makes the pcnet-pci NIC to work again on big endian MIPS Malta
(default NIC).
Cc: qemu-stable@nongnu.org
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The following sequence happens:
- the SeaBIOS virtio-blk driver does not support the WCE feature, which
causes QEMU to disable writeback caching
- the Linux virtio-blk driver resets the device, finds WCE is available
but writeback caching is disabled; tells block layer to not send cache
flush commands
- the Linux virtio-blk driver sets the DRIVER_OK bit, which causes
writeback caching to be re-enabled, but the Linux virtio-blk driver does
not know of this side effect and cache flushes remain disabled
The bug is at the third step. If the guest does know about CONFIG_WCE,
QEMU should ignore the WCE feature's state. The guest will control the
cache mode solely using configuration space. This change makes Linux
do flushes correctly, but Linux will keep SeaBIOS's writethrough mode.
Hence, whenever the guest is reset, the cache mode of the disk should
be reset to whatever was specified in the "-drive" option. With this
change, the Linux virtio-blk driver finds that writeback caching is
enabled, and tells the block layer to send cache flush commands
appropriately.
Reported-by: Rusty Russell <rusty@au1.ibm.com
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Report from clang analyzer:
clock.c:42:15: warning:
Value stored to 'cpu' during its initialization is never read
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Add simple support for SCLP line-mode also known as operating
system messages. This can be added in addition to or instead of
the SCLP full screen console with -device sclplmconsole.
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Currently all handlers (quiesce, console) only handle one event type.
Some drivers will handle multiple (compatible) event types. Rework the
code accordingly.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
The event_type variable is never used. Get rid of it.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Make the handler for SCLP Read Event Data deal with notifications
for multiple sources correctly.
Signed-off-by: Ralf Hoppe <rhoppe@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[split bigger patch into smaller independent chunks]
Reviewed-by: Alexander Graf <agraf@suse.de>
Add reset() functions for event-facility, sclpconsole, and sclpquiesce.
The reset() functions perform variable initialization
at IPL and e.g. when monitor system_reset is called.
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch adds the necessary life migration pieces to sclpquiesce
by using the vmstate_register.
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch adds the necessary life migration pieces to the sclp code
by using vmstate_register.
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
To use VMState for migration, we need to adapt some sclp code:
- allocate console buffer as part of the console
- change semantic of sclpconsole offset fields
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
To avoid misinterpreting INACTIVE after migration as old qemu-kvm's
STANDBY, also clear rom_state_paddr when going back to this state.
CC: qemu-stable@nongnu.org
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ROM layout may change after reset of devices are hotplugged, so we have
to pick up the physical address again when the ROM is initialized. This
is best achieved by resetting the state to INACTIVE.
CC: qemu-stable@nongnu.org
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If not caught early, a zero-length ROM will cause a NULL-pointer access
later on in patch_hypercalls when allocating a zero-length ROM copy and
trying to read from it.
CC: qemu-stable@nongnu.org
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
