Commit Graph

1370 Commits

Author SHA1 Message Date
Peter Krempa 6e9f21a2aa migration: dirty-bitmap: Allow control of bitmap persistence
Bitmap's source persistence is transported over the migration stream and
the destination mirrors it. In some cases the destination might want to
persist bitmaps which are not persistent on the source (e.g. the result
of merging bitmaps from a number of layers on the source when migrating
into a squashed image) but currently it would need to create another set
of persistent bitmaps and merge them.

This patch adds a 'transform' property to the alias map which allows
overriding the persistence of migrated bitmaps both on the source and
destination sides.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Message-Id: <b20afb675917b86f6359ac3591166ac6d4233573.1613150869.git.pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweaks, drop dead conditional]
Signed-off-by: Eric Blake <eblake@redhat.com>
2021-02-12 15:24:36 -06:00
Peter Krempa 0d1e450c7b migration: dirty-bitmap: Use struct for alias map inner members
Currently the alias mapping hash stores just strings of the target
objects internally. In further patches we'll be adding another member
which will need to be stored in the map so pass a copy of the whole
BitmapMigrationBitmapAlias QAPI struct into the map.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Message-Id: <fc5f27e1fe16cb75e08a248c2d938de3997b9bfb.1613150869.git.pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: adjust long lines]
Signed-off-by: Eric Blake <eblake@redhat.com>
2021-02-12 14:50:55 -06:00
Stefan Reiter e846b74650 migration: only check page size match if RAM postcopy is enabled
Postcopy may also be advised for dirty-bitmap migration only, in which
case the remote page size will not be available and we'll instead read
bogus data, blocking migration with a mismatch error if the VM uses
hugepages.

Fixes: 58110f0acb ("migration: split common postcopy out of ram postcopy")
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Message-Id: <20210204163522.13291-1-s.reiter@proxmox.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-08 11:19:52 +00:00
Daniel P. Berrangé 0f0d83a456 migration: introduce snapshot-{save, load, delete} QMP commands
savevm, loadvm and delvm are some of the few HMP commands that have never
been converted to use QMP. The reasons for the lack of conversion are
that they blocked execution of the event thread, and the semantics
around choice of disks were ill-defined.

Despite this downside, however, libvirt and applications using libvirt
have used these commands for as long as QMP has existed, via the
"human-monitor-command" passthrough command. IOW, while it is clearly
desirable to be able to fix the problems, they are not a blocker to
all real world usage.

Meanwhile there is a need for other features which involve adding new
parameters to the commands. This is possible with HMP passthrough, but
it provides no reliable way for apps to introspect features, so using
QAPI modelling is highly desirable.

This patch thus introduces new snapshot-{load,save,delete} commands to
QMP that are intended to replace the old HMP counterparts. The new
commands are given different names, because they will be using the new
QEMU job framework and thus will have diverging behaviour from the HMP
originals. It would thus be misleading to keep the same name.

While this design uses the generic job framework, the current impl is
still blocking. The intention that the blocking problem is fixed later.
None the less applications using these new commands should assume that
they are asynchronous and thus wait for the job status change event to
indicate completion.

In addition to using the job framework, the new commands require the
caller to be explicit about all the block device nodes used in the
snapshot operations, with no built-in default heuristics in use.

Note that the existing "query-named-block-nodes" can be used to query
what snapshots currently exist for block nodes.

Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210204124834.774401-13-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
  dgilbert: removed tests for now, the output ordering isn't
deterministic
2021-02-08 11:19:52 +00:00
Daniel P. Berrangé bef7e9e2c7 migration: introduce a delete_snapshot wrapper
Make snapshot deletion consistent with the snapshot save
and load commands by using a wrapper around the blockdev
layer. The main difference is that we get upfront validation
of the passed in device list (if any).

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210204124834.774401-10-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-08 11:19:51 +00:00
Daniel P. Berrangé f1a9fcdd01 migration: wire up support for snapshot device selection
Modify load_snapshot/save_snapshot to accept the device list and vmstate
node name parameters previously added to the block layer.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210204124834.774401-9-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-08 11:19:51 +00:00
Daniel P. Berrangé f781f84189 migration: control whether snapshots are ovewritten
The traditional HMP "savevm" command will overwrite an existing snapshot
if it already exists with the requested name. This new flag allows this
to be controlled allowing for safer behaviour with a future QMP command.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210204124834.774401-8-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-08 11:19:51 +00:00
Daniel P. Berrangé 3d3e9b1f66 block: rename and alter bdrv_all_find_snapshot semantics
Currently bdrv_all_find_snapshot() will return 0 if it finds
a snapshot, -1 if an error occurs, or if it fails to find a
snapshot. New callers to be added want to distinguish between
the error scenario and failing to find a snapshot.

Rename it to bdrv_all_has_snapshot and make it return -1 on
error, 0 if no snapshot is found and 1 if snapshot is found.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210204124834.774401-7-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-08 11:19:51 +00:00
Daniel P. Berrangé c22d644ca7 block: allow specifying name of block device for vmstate storage
Currently the vmstate will be stored in the first block device that
supports snapshots. Historically this would have usually been the
root device, but with UEFI it might be the variable store. There
needs to be a way to override the choice of block device to store
the state in.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210204124834.774401-6-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-08 11:19:51 +00:00
Daniel P. Berrangé cf3a74c94f block: add ability to specify list of blockdevs during snapshot
When running snapshot operations, there are various rules for which
blockdevs are included/excluded. While this provides reasonable default
behaviour, there are scenarios that are not well handled by the default
logic. Some of the conditions do not have a single correct answer.

Thus there needs to be a way for the mgmt app to provide an explicit
list of blockdevs to perform snapshots across. This can be achieved
by passing a list of node names that should be used.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210204124834.774401-5-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-08 11:19:51 +00:00
Daniel P. Berrangé f61fe11aa6 migration: stop returning errno from load_snapshot()
None of the callers care about the errno value since there is a full
Error object populated. This gives consistency with save_snapshot()
which already just returns a boolean value.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
[PMD: Return false/true instead of -1/0, document function]
Acked-by: Pavel Dovgalyuk <pavel.dovgalyuk@ispras.ru>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210204124834.774401-4-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-08 11:19:51 +00:00
Philippe Mathieu-Daudé 7ea14df230 migration: Make save_snapshot() return bool, not 0/-1
Just for consistency, following the example documented since
commit e3fe3988d7 ("error: Document Error API usage rules"),
return a boolean value indicating an error is set or not.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Pavel Dovgalyuk <pavel.dovgalyuk@ispras.ru>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210204124834.774401-3-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-08 11:19:51 +00:00
Daniel P. Berrangé e26f98e209 block: push error reporting into bdrv_all_*_snapshot functions
The bdrv_all_*_snapshot functions return a BlockDriverState pointer
for the invalid backend, which the callers then use to report an
error message. In some cases multiple callers are reporting the
same error message, but with slightly different text. In the future
there will be more error scenarios for some of these methods, which
will benefit from fine grained error message reporting. So it is
helpful to push error reporting down a level.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
[PMD: Initialize variables]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210204124834.774401-2-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-08 11:19:51 +00:00
Dr. David Alan Gilbert 3af8554bd0 migration: Add blocker information
Modify query-migrate so that it has a flag indicating if outbound
migration is blocked, and if it is a list of reasons.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210202135522.127380-2-dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-08 11:19:51 +00:00
Markus Armbruster 54270c450a migration: Fix a few absurdly defective error messages
migrate_params_check() has a number of error messages of the form

    Parameter 'NAME' expects is invalid, it should be ...

Fix them to something like

    Parameter 'NAME' expects a ...

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210202141734.2488076-5-armbru@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-08 11:19:51 +00:00
Markus Armbruster 7bfc47936e migration: Fix cache_init()'s "Failed to allocate" error messages
cache_init() attempts to handle allocation failure.  The two error
messages are garbage, as untested error messages commonly are:

    Parameter 'cache size' expects Failed to allocate cache
    Parameter 'cache size' expects Failed to allocate page cache

Fix them to just

    Failed to allocate cache
    Failed to allocate page cache

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210202141734.2488076-4-armbru@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-08 11:19:51 +00:00
Markus Armbruster 8b9407a09f migration: Clean up signed vs. unsigned XBZRLE cache-size
73af8dd8d7 "migration: Make xbzrle_cache_size a migration
parameter" (v2.11.0) made the new parameter unsigned (QAPI type
'size', uint64_t in C).  It neglected to update existing code, which
continues to use int64_t.

migrate_xbzrle_cache_size() returns the new parameter.  Adjust its
return type.

QMP query-migrate-cache-size returns migrate_xbzrle_cache_size().
Adjust its return type.

migrate-set-parameters passes the new parameter to
xbzrle_cache_resize().  Adjust its parameter type.

xbzrle_cache_resize() passes it on to cache_init().  Adjust its
parameter type.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210202141734.2488076-3-armbru@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-08 11:19:51 +00:00
Andrey Gruzdev 8518278a6a migration: implementation of background snapshot thread
Introducing implementation of 'background' snapshot thread
which in overall follows the logic of precopy migration
while internally utilizes completely different mechanism
to 'freeze' vmstate at the start of snapshot creation.

This mechanism is based on userfault_fd with wr-protection
support and is Linux-specific.

Signed-off-by: Andrey Gruzdev <andrey.gruzdev@virtuozzo.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210129101407.103458-5-andrey.gruzdev@virtuozzo.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-08 11:19:51 +00:00
Andrey Gruzdev 278e2f551a migration: support UFFD write fault processing in ram_save_iterate()
In this particular implementation the same single migration
thread is responsible for both normal linear dirty page
migration and procesing UFFD page fault events.

Processing write faults includes reading UFFD file descriptor,
finding respective RAM block and saving faulting page to
the migration stream. After page has been saved, write protection
can be removed. Since asynchronous version of qemu_put_buffer()
is expected to be used to save pages, we also have to flush
migraion stream prior to un-protecting saved memory range.

Write protection is being removed for any previously protected
memory chunk that has hit the migration stream. That's valid
for pages from linear page scan along with write fault pages.

Signed-off-by: Andrey Gruzdev <andrey.gruzdev@virtuozzo.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210129101407.103458-4-andrey.gruzdev@virtuozzo.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
  fixup pagefault.address cast for 32bit
2021-02-08 11:19:51 +00:00
Andrey Gruzdev 6e8c25b4c6 migration: introduce 'background-snapshot' migration capability
Add new capability to 'qapi/migration.json' schema.
Update migrate_caps_check() to validate enabled capability set
against introduced one. Perform checks for required kernel features
and compatibility with guest memory backends.

Signed-off-by: Andrey Gruzdev <andrey.gruzdev@virtuozzo.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210129101407.103458-2-andrey.gruzdev@virtuozzo.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-08 11:19:51 +00:00
Wainer dos Santos Moschetta 1dfafcbd39 migration/qemu-file: Fix maybe uninitialized on qemu_get_buffer_in_place()
Fixed error when compiling migration/qemu-file.c with -Werror=maybe-uninitialized
as shown here:

../migration/qemu-file.c: In function 'qemu_get_buffer_in_place':
../migration/qemu-file.c:604:18: error: 'src' may be used uninitialized in this function [-Werror=maybe-uninitialized]
  604 |             *buf = src;
      |             ~~~~~^~~~~
cc1: all warnings being treated as errors

Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210128130625.569900-1-wainersm@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-08 11:19:51 +00:00
Jinhao Gao 39f633d429 savevm: Fix memory leak of vmstate_configuration
When VM migrate VMState of configuration, the fields(name and capabilities)
of configuration having a flag of VMS_ALLOC need to allocate memory. If the
src doesn't free memory of capabilities in SaveState after save VMState of
configuration, or the dst doesn't free memory of name and capabilities in post
load of configuration, it may result in memory leak of name and capabilities.
We free memory in configuration_post_save and configuration_post_load func,
which prevents memory leak.

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Jinhao Gao <gaojinhao@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20201231061020.828-3-gaojinhao@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-08 11:19:51 +00:00
Eric Blake 95b3a8c8a8 qapi: More complex uses of QAPI_LIST_APPEND
These cases require a bit more thought to review; in each case, the
code was appending to a list, but not with a FOOList **tail variable.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210113221013.390592-6-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Flawed change to qmp_guest_network_get_interfaces() dropped]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2021-01-28 08:08:45 +01:00
Lukas Straub b5eea99ec2 migration: Add yank feature
Register yank functions on sockets to shut them down.

Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <484c6a14cc2506bebedd5a237259b91363ff8f88.1609167865.git.lukasstraub2@web.de>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2021-01-13 10:21:17 +01:00
Peter Maydell 729cc68373 Remove superfluous timer_del() calls
This commit is the result of running the timer-del-timer-free.cocci
script on the whole source tree.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201215154107.3255-4-peter.maydell@linaro.org
2021-01-08 15:13:38 +00:00
Paolo Bonzini b1def33d19 zstd: convert to meson
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-06 10:21:20 +01:00
Peter Maydell 41192db338 Machine queue, 2020-12-23
Cleanup:
 * qdev code cleanup (Eduardo Habkost)
 
 Bug fix:
 * hostmem: Free host_nodes list right after visited (Keqian Zhu)
 -----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCAAyFiEEWjIv1avE09usz9GqKAeTb5hNxaYFAl/jteYUHGVoYWJrb3N0
 QHJlZGhhdC5jb20ACgkQKAeTb5hNxaZUHw//c40nRlYdGSV5j6w3ZCSlmZRFxZTU
 UiLK51Z3hI9Q9kyLcoIQitEYlQTIbgp0qlIJ6evDd/HvQvZ+P4P0Lzm1UGOZhD0h
 nJk5+bBkP/mzMh0P9oiN20DSLk6a3Wvdiu/bQR8gm/WdLvTM1Zjek1ns5tL06ZvA
 MziG6gIypgScu2FeNxD0zC8sDO16oVrzKq7mjZcQe6XYFRsJmYjZw84v+uu/Bdf7
 MBxolkA8vYwwBJNdVsAf7I0Gw3BeArgPUOwbWyt8/tuGIOZxYjdKIj55S7j2fuju
 524sg8Di+YzxmLZaNAGksEBMj9uY39nwdHGhNElMtWCM9oOPumlps9eyLtpTagfM
 wmiVrMGWVlXV6c4kZo8R2NSF8hcDr02S7eyrUpITrh09p4nT6fBGG2ufEYiCyNao
 o9ZqMf7NUO5J60zM5EOfdGxpaN2O0M5pXCCN48NtmqvO0wIAfTc9l/OkCrrfVbEO
 Q/X1jqbj6ZcilSIl9OeLAPi7Xjx26jMeeLPUQtoZnkqDvpk/Vz6Ka1RgGG86QA5z
 2W/KCAoVrg6dO4f9vY3x84rf0Ta5kJtp2LezPgG8d++4bMSf2jN00wYvAQuCyqqW
 zbm8f57YST3vm8XMHPlmtnlKfiLI4wbVUmrDYu3rNI+JgdvhdXseGoErt15ejAcL
 B5IH2SK4AwMpSsk=
 =bnjc
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/ehabkost-gl/tags/machine-next-pull-request' into staging

Machine queue, 2020-12-23

Cleanup:
* qdev code cleanup (Eduardo Habkost)

Bug fix:
* hostmem: Free host_nodes list right after visited (Keqian Zhu)

# gpg: Signature made Wed 23 Dec 2020 21:25:58 GMT
# gpg:                using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg:                issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* remotes/ehabkost-gl/tags/machine-next-pull-request:
  bugfix: hostmem: Free host_nodes list right after visited
  qdev: Avoid unnecessary DeviceState* variable at set_prop_arraylen()
  qdev: Rename qdev_get_prop_ptr() to object_field_prop_ptr()
  qdev: Move qdev_prop_tpm declaration to tpm_prop.h
  qdev: Make qdev_class_add_property() more flexible
  qdev: Make PropertyInfo.create return ObjectProperty*
  qdev: Move dev->realized check to qdev_property_set()
  qdev: Wrap getters and setters in separate helpers
  qdev: Add name argument to PropertyInfo.create method
  qdev: Add name parameter to qdev_class_add_property()
  qdev: Avoid using prop->name unnecessarily
  qdev: Get just property name at error_set_from_qdev_prop_error()
  sparc: Use DEFINE_PROP for nwindows property
  qdev: Reuse DEFINE_PROP in all DEFINE_PROP_* macros
  qdev: Move softmmu properties to qdev-properties-system.h

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-01-01 22:57:15 +00:00
Peter Maydell 1f7c02797f QAPI patches patches for 2020-12-19
-----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAl/dynUSHGFybWJydUBy
 ZWRoYXQuY29tAAoJEDhwtADrkYZT3igP/3bWwsKR5vKVsDUTmMfrhcgaFvQiaYoG
 F29Bond8Xy0Zd0gl7OWh/5jKL0vGlrEVPrKfYLUjMnfkeRec/pOkIB2oOmIxpnPs
 9zi4kh2hQ3dEoRBuvSnnZzedetYPTuCpWMIjlztkgfxgcimqm8TPNVSxRaSApjC3
 Y8108wGwBWVf2C0rhKO9E2xA51uo6khy05i1psUtqUlC+PuDQ/OwzQHM2dnWdDB6
 kUwBDK17nhL6WwsYqCyKLSiDModReYfDiY8GS5MDLo74dzwXiatEefCR7+sbM4xq
 eX/SBoqoeS1jLPNuCryNeGNKvNA2KAbEJTnbQA2NxBXHgZ9/1SxVZFxuPp4nDMSQ
 N7BDuDI8YtJE479RjT/ZzRG65xadGBSe/HXkXM9mZwh1zitop8SVZ9fArFBHvNzw
 Y5zAv3fQd54+87psffg4dYFK0wGmqTabLEEuVzM8KIVqcAdYA2yC2b2EHy+vsxuq
 GMkr0WaA6Sq2gthXmzdTjmUPuHdan/NIhuV6d66SbPNH2oH31piptFxuznyFWSKV
 isciFFdUrkg5QrF8DSt2nmdwMFf8QGbszqP8QIGMzhJCCS9GXIiGG8f149++q8X8
 HO1lFAdLQJdrDwCYmfx36tOvi2rS/rcoTGgvg66UX3xKko1ruoxR1ZWcS54obJN6
 vEQDZ+PxubDg
 =vGLy
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2020-12-19' into staging

QAPI patches patches for 2020-12-19

# gpg: Signature made Sat 19 Dec 2020 09:40:05 GMT
# gpg:                using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg:                issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-qapi-2020-12-19: (33 commits)
  qobject: Make QString immutable
  block: Use GString instead of QString to build filenames
  keyval: Use GString to accumulate value strings
  json: Use GString instead of QString to accumulate strings
  migration: Replace migration's JSON writer by the general one
  qobject: Factor JSON writer out of qobject_to_json()
  qobject: Factor quoted_str() out of to_json()
  qobject: Drop qstring_get_try_str()
  qobject: Drop qobject_get_try_str()
  Revert "qobject: let object_property_get_str() use new API"
  block: Avoid qobject_get_try_str()
  qmp: Fix tracing of non-string command IDs
  qobject: Move internals to qobject-internal.h
  hw/rdma: Replace QList by GQueue
  Revert "qstring: add qstring_free()"
  qobject: Change qobject_to_json()'s value to GString
  qobject: Use GString instead of QString to accumulate JSON
  qobject: Make qobject_to_json_pretty() take a pretty argument
  monitor: Use GString instead of QString for output buffer
  hmp: Simplify how qmp_human_monitor_command() gets output
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-01-01 14:33:03 +00:00
Markus Armbruster 3ddba9a9e9 migration: Replace migration's JSON writer by the general one
Commit 8118f0950f "migration: Append JSON description of migration
stream" needs a JSON writer.  The existing qobject_to_json() wasn't a
good fit, because it requires building a QObject to convert.  Instead,
migration got its very own JSON writer, in commit 190c882ce2 "QJSON:
Add JSON writer".  It tacitly limits numbers to int64_t, and strings
contents to characters that don't need escaping, unlike
qobject_to_json().

The previous commit factored the JSON writer out of qobject_to_json().
Replace migration's JSON writer by it.

Cc: Juan Quintela <quintela@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201211171152.146877-17-armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-12-19 10:39:16 +01:00
Eric Blake 54aa3de72e qapi: Use QAPI_LIST_PREPEND() where possible
Anywhere we create a list of just one item or by prepending items
(typically because order doesn't matter), we can use
QAPI_LIST_PREPEND().  But places where we must keep the list in order
by appending remain open-coded until later patches.

Note that as a side effect, this also performs a cleanup of two minor
issues in qga/commands-posix.c: the old code was performing
 new = g_malloc0(sizeof(*ret));
which 1) is confusing because you have to verify whether 'new' and
'ret' are variables with the same type, and 2) would conflict with C++
compilation (not an actual problem for this file, but makes
copy-and-paste harder).

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201113011340.463563-5-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
[Straightforward conflicts due to commit a8aa94b5f8 "qga: update
schema for guest-get-disks 'dependents' field" and commit a10b453a52
"target/mips: Move mips_cpu_add_definition() from helper.c to cpu.c"
resolved.  Commit message tweaked.]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-12-19 10:20:14 +01:00
Eric Blake eaedde5255 migration: Refactor migrate_cap_add
Instead of taking a list parameter and returning a new head at a
distance, just return the new item for the caller to insert into a
list via QAPI_LIST_PREPEND.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201113011340.463563-4-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-12-19 10:15:08 +01:00
Eduardo Habkost ce35e2295e qdev: Move softmmu properties to qdev-properties-system.h
Move the property types and property macros implemented in
qdev-properties-system.c to a new qdev-properties-system.h
header.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20201211220529.2290218-16-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-12-18 15:20:17 -05:00
Tuguoyi 36d0fe6516 migration: Don't allow migration if vm is in POSTMIGRATE
The following steps will cause qemu assertion failure:
- pause vm by executing 'virsh suspend'
- create external snapshot of memory and disk using 'virsh snapshot-create-as'
- doing the above operation again will cause qemu crash

The backtrace looks like:
    at /build/qemu-5.0/migration/savevm.c:1401
    at /build/qemu-5.0/migration/savevm.c:1453

When the first migration completes, bs->open_flags will set BDRV_O_INACTIVE
flag by bdrv_inactivate_all(), and during the second migration the
bdrv_inactivate_recurse assert that the bs->open_flags is already
BDRV_O_INACTIVE enabled which cause crash.

As Vladimir suggested, this patch makes migrate_prepare check the state of vm and
return error if it is in RUN_STATE_POSTMIGRATE state.

Signed-off-by: Tuguoyi <tu.guoyi@h3c.com>
Message-Id: <6b704294ad2e405781c38fb38d68c744@h3c.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reported-by: Li Zhang <li.zhang@cloud.ionos.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@cloud.ionos.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-12-18 10:08:25 +00:00
Tuguoyi 2a909dc430 savevm: Delete snapshots just created in case of error
bdrv_all_create_snapshot() can fails with some snapshots created,
so it's better to delete those snapshots before returns to the caller

Signed-off-by: Tuguoyi <tu.guoyi@h3c.com>
Message-Id: <1607410416-13563-3-git-send-email-tu.guoyi@h3c.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-12-18 10:08:24 +00:00
Tuguoyi 80ef0586d3 savevm: Remove dead code in save_snapshot()
The snapshot in each bs is deleted at the beginning, so there is no need
to find the snapshot again.

Signed-off-by: Tuguoyi <tu.guoyi@h3c.com>
Message-Id: <1607410416-13563-2-git-send-email-tu.guoyi@h3c.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-12-18 10:08:24 +00:00
Paolo Bonzini e69d50d621 migration, vl: start migration via qmp_migrate_incoming
Make qemu_start_incoming_migration local to migration/migration.c.
By using the runstate instead of a separate flag, vl need not do
anything to setup deferred incoming migration.

qmp_migrate_incoming also does not need the deferred_incoming flag
anymore, because "-incoming PROTOCOL" will clear the "once" flag
before the main loop starts.  Therefore, later invocations of
the migrate-incoming command will fail with the existing
"The incoming migration has already been started" error message.

Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-10 12:15:14 -05:00
Paolo Bonzini e0d17dfd22 vl: move various initialization routines out of qemu_init
Some very simple initialization routines can be nested in existing
subsystem-level functions, do that to simplify qemu_init.

Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-10 12:15:11 -05:00
Chetan Pant ef19b50d93 migration: Fix Lesser GPL version number
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.

Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023123130.19656-1-chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-11-15 16:43:28 +01:00
Longpeng(Mike) 6ba11211bd migration: handle CANCELLING state in migration_completion()
The following sequence may cause the VM abort during migration:

1. RUN_STATE_RUNNING,MIGRATION_STATUS_ACTIVE

2. before call migration_completion(), we send migrate_cancel
   QMP command, the state machine is changed to:
     RUN_STATE_RUNNING,MIGRATION_STATUS_CANCELLING

3. call migration_completion(), and the state machine is
   switch to: RUN_STATE_RUNNING,MIGRATION_STATUS_COMPLETED

4. call migration_iteration_finish(), because the migration
   status is COMPLETED, so it will try to set the runstate
   to POSTMIGRATE, but RUNNING-->POSTMIGRATE is an invalid
   transition, so abort().

The migration_completion() should not change the migration state
to COMPLETED if it is already changed to CANCELLING.

Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Message-Id: <20201105091726.148-1-longpeng2@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-11-12 15:52:20 +00:00
Chuan Zheng 9e8424088c multifd/tls: fix memoryleak of the QIOChannelSocket object when cancelling migration
When creating new tls client, the tioc->master will be referenced which results in socket
leaking after multifd_save_cleanup if we cancel migration.
Fix it by do object_unref() after tls client creation.

Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Message-Id: <1605104763-118687-1-git-send-email-zhengchuan@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-11-12 15:52:20 +00:00
Chuan Zheng a18ed79b19 migration/dirtyrate: simplify includes in dirtyrate.c
Remove redundant blank line which is left by Commit 662770af7c,
also take this opportunity to remove redundant includes in dirtyrate.c.

Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Message-Id: <1604030281-112946-1-git-send-email-zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-11-12 15:52:14 +00:00
Chen Qun a24292830b migration: fix uninitialized variable warning in migrate_send_rp_req_pages()
After the WITH_QEMU_LOCK_GUARD macro is added, the compiler cannot identify
 that the statements in the macro must be executed. As a result, some variables
 assignment statements in the macro may be considered as unexecuted by the compiler.

When the -Wmaybe-uninitialized capability is enabled on GCC9,the compiler showed warning:
migration/migration.c: In function ‘migrate_send_rp_req_pages’:
migration/migration.c:384:8: warning: ‘received’ may be used uninitialized in this function [-Wmaybe-uninitialized]
 384 |     if (received) {
     |        ^

Add a default value for 'received' to prevented the warning.

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201111142203.2359370-6-kuhn.chenqun@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-11-12 14:49:16 +00:00
Chuan Zheng a1af605bd5 migration/multifd: fix hangup with TLS-Multifd due to blocking handshake
The qemu main loop could hang up forever when we enable TLS+Multifd.
The Src multifd_send_0 invokes tls handshake, it sends hello to sever
and wait response.
However, the Dst main qemu loop has been waiting recvmsg() for multifd_recv_1.
Both of Src and Dst main qemu loop are blocking and waiting for reponse which
results in hanging up forever.

Src: (multifd_send_0)                                              Dst: (multifd_recv_1)
multifd_channel_connect                                            migration_channel_process_incoming
  multifd_tls_channel_connect                                        migration_tls_channel_process_incoming
    multifd_tls_channel_connect                                        qio_channel_tls_handshake_task
       qio_channel_tls_handshake                                         gnutls_handshake
          qio_channel_tls_handshake_task                                       ...
            qcrypto_tls_session_handshake                                      ...
              gnutls_handshake                                                 ...
                   ...                                                         ...
                recvmsg (Blocking I/O waiting for response)                recvmsg (Blocking I/O waiting for response)

Fix this by offloadinig handshake work to a background thread.

Reported-by: Yan Jin <jinyan12@huawei.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Message-Id: <1604643893-8223-1-git-send-email-zhengchuan@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-11-12 14:35:29 +00:00
Philippe Mathieu-Daudé af3bbbe984 migration/ram: Fix hexadecimal format string specifier
The '%u' conversion specifier is for decimal notation.
When prefixing a format with '0x', we want the hexadecimal
specifier ('%x').

Inspired-by: Dov Murik <dovmurik@linux.vnet.ibm.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20201103112558.2554390-5-philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-11-12 14:02:41 +00:00
Rao, Lei b70cb3b485 Reduce the time of checkpoint for COLO
we should set ram_bulk_stage to false after ram_state_init,
otherwise the bitmap will be unused in migration_bitmap_find_dirty.
all pages in ram cache will be flushed to the ram of secondary guest
for each checkpoint.

Signed-off-by: Lei Rao <lei.rao@intel.com>
Signed-off-by: Derek Su <dereksu@qnap.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-11-11 16:52:23 +08:00
Peter Xu 5e77343113 migration: Postpone the kick of the fault thread after recover
The new migrate_send_rp_req_pages_pending() call should greatly improve
destination responsiveness because it will resync faulted address after
postcopy recovery.  However it is also the 1st place to initiate the page
request from the main thread.

One thing is overlooked on that migrate_send_rp_message_req_pages() is not
designed to be thread-safe.  So if we wake the fault thread before syncing all
the faulted pages in the main thread, it means they can race.

Postpone the wake up operation after the sync of faulted addresses.

Fixes: 0c26781c09 ("migration: Sync requested pages after postcopy recovery")
Tested-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201102153010.11979-3-peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-11-02 18:25:48 +00:00
Peter Xu cc5ab87200 migration: Unify reset of last_rb on destination node when recover
When postcopy recover happens, we need to reset last_rb after each return of
postcopy_pause_fault_thread() because that means we just got the postcopy
migration continued.

Unify this reset to the place right before we want to kick the fault thread
again, when we get the command MIG_CMD_POSTCOPY_RESUME from source.

This is actually more than that - because the main thread on destination will
now be able to call migrate_send_rp_req_pages_pending() too, so the fault
thread is not the only user of last_rb now.  Move the reset earlier will allow
the first call to migrate_send_rp_req_pages_pending() to use the reset value
even if called from the main thread.

(NOTE: this is not a real fix to 0c26781c09 mentioned below, however it is just
 a mark that when picking up 0c26781c09 we'd better have this one too; the real
 fix will come later)

Fixes: 0c26781c09 ("migration: Sync requested pages after postcopy recovery")
Tested-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20201102153010.11979-2-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-11-02 18:25:39 +00:00
Kirti Wankhede 3710586caa qapi: Add VFIO devices migration stats in Migration stats
Added amount of bytes transferred to the VM at destination by all VFIO
devices

Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01 12:30:51 -07:00
Peter Maydell d55450df99 migration pull: 2020-10-26
Another go at Peter's postcopy fixes
 
 Cleanups from Bihong Yu and Peter Maydell.
 
 Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEERfXHG0oMt/uXep+pBRYzHrxb/ecFAl+W9n8ACgkQBRYzHrxb
 /ef2uRAAqWTFLXuBF8+evEd1mMq2SM3ZYTuc7QKTY3MzAH6J/OMvJbZ112itqWOb
 iZ5NuuWH4PvzOhlR/PNNf1Yv3hTfv36HinG+OCh6s+6aqVx9yHOAfdBgmJIdYAeg
 Sk1jx43dvCyN2FwPs31ir3L6mwsrtfkRsS+2FeyrvRoEl4WE9mOoypCft3vdd9Dw
 zZea0Pw7vIs454D4n1vpJiQtq6B4eSAlQKpTLfQbglpTm4MgqLERzGvpT6hbQXJR
 eQyTOqRe08viIOZ+oN0B/+RVO6T9jc4Y1bEl2NSak1v4Tf7NNfDkFpLAjFm07V/1
 tIhL/NOOsHdzfHQtrZpzKQgwaceb1N5qo0PfxD6/tRf9HlXY54iw6yY75+5c5Y89
 UK8VSIYKnM2yXeVDLShxixIr3A1Z+zA41XydDwaLZczjeV7+nwrAXAjO8a+j6Dox
 zj4IyN2g5elEOmarC8qkvbDZ+TVvA2tookhWVwoz+D8ChYkcRDKP9eoYomfRwg+e
 NKRFuLBkyVPb0eEhyOV6HqJbMfTLpHneTM94v6HGz8tiK8IlMZfTTnC2Mr5gTXuS
 /cgOVhsY7+l+pKpxpGJmU3aUCYRk1CuK6MhXgjYEFMh5Siba8s0ZPZVaEm/BUyO1
 rD+tVup87xMiJq3xnmLX+opblYE9G+b67hH1KuPc5vZXiSwuTkQ=
 =OL0Q
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20201026a' into staging

migration pull: 2020-10-26

Another go at Peter's postcopy fixes

Cleanups from Bihong Yu and Peter Maydell.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

# gpg: Signature made Mon 26 Oct 2020 16:17:03 GMT
# gpg:                using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A  9FA9 0516 331E BC5B FDE7

* remotes/dgilbert/tags/pull-migration-20201026a:
  migration-test: Only hide error if !QTEST_LOG
  migration/postcopy: Release fd before going into 'postcopy-pause'
  migration: Sync requested pages after postcopy recovery
  migration: Maintain postcopy faulted addresses
  migration: Introduce migrate_send_rp_message_req_pages()
  migration: Pass incoming state into qemu_ufd_copy_ioctl()
  migration: using trace_ to replace DPRINTF
  migration: Delete redundant spaces
  migration: Open brace '{' following function declarations go on the next line
  migration: Do not initialise statics and globals to 0 or NULL
  migration: Add braces {} for if statement
  migration: Open brace '{' following struct go on the same line
  migration: Add spaces around operator
  migration: Don't use '#' flag of printf format
  migration: Do not use C99 // comments
  migration: Drop unused VMSTATE_FLOAT64 support

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27 10:25:42 +00:00
Peter Maydell 091e3e3dbc bitmaps patches for 2020-10-26
- fix infloop on large bitmap granularity
 - silence compiler warning
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEccLMIrHEYCkn0vOqp6FrSiUnQ2oFAl+WuYYACgkQp6FrSiUn
 Q2owKwgAhXf5jJEoUzSMFIIczxST9eaokL4Jweb65bp2y4Ii014/kzAnwyU+7B1Y
 DMniSrpySi1F74zng2eOKijgNDgQ1INm1v5P/qeoMa4UpPwL3eaNQl3FwMUCJMdN
 WVo3jl1wxzqcRDVUWDWiAMD0C03nzRKI8i2uw4USUDXiW12bLC0YQPzOCofZagld
 xC1HAnqRMCnK10lj4aoY5jOHQL9R05TLtsEcQCdI73q3c87p+sxI1eOlqJcZw1KC
 vgb6uMOXQrkTPKfVsUK5bJ+aJh97LHhWb/o/Jj65f5IMbBQzaebRby3m38Pgph2W
 +AVuxe2FBAo7o+heucbOrrFwAUcofw==
 =ArcV
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/ericb/tags/pull-bitmaps-2020-10-26' into staging

bitmaps patches for 2020-10-26

- fix infloop on large bitmap granularity
- silence compiler warning

# gpg: Signature made Mon 26 Oct 2020 11:56:54 GMT
# gpg:                using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg:                 aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg:                 aka "[jpeg image of size 6874]" [full]
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2  F3AA A7A1 6B4A 2527 436A

* remotes/ericb/tags/pull-bitmaps-2020-10-26:
  migration/block-dirty-bitmap: fix uninitialized variable warning
  migration/block-dirty-bitmap: fix larger granularity bitmaps

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-26 22:36:35 +00:00