The mirror block job must run in the BlockDriverState AioContext so that
it works with dataplane.
Acquire the AioContext in blockdev.c so starting the block job is safe.
Note that to_replace is treated separately from other BlockDriverStates
in that it does not need to be in the same AioContext. Explicitly
acquire/release to_replace's AioContext when accessing it.
The completion code in block/mirror.c must perform BDS graph
manipulation and bdrv_reopen() from the main loop. Use
block_job_defer_to_main_loop() to achieve that.
The bdrv_drain_all() call is not allowed outside the main loop since it
could lead to lock ordering problems. Use bdrv_drain(bs) instead
because we have acquired the AioContext so nothing else can sneak in
I/O.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1413889440-32577-10-git-send-email-stefanha@redhat.com
The stream block job must run in the BlockDriverState AioContext so that
it works with dataplane.
The basics of acquiring the AioContext are easy in blockdev.c.
The tricky part is the completion code which drops part of the backing
file chain. This must be done in the main loop where bdrv_unref() and
bdrv_close() are safe to call. Use block_job_defer_to_main_loop() to
achieve that.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1413889440-32577-9-git-send-email-stefanha@redhat.com
The backup block job must run in the BlockDriverState AioContext so that
it works with dataplane.
The basics of acquiring the AioContext are easy in blockdev.c.
The completion code in block/backup.c must call bdrv_unref() from the
main loop. Use block_job_defer_to_main_loop() to achieve that.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1413889440-32577-8-git-send-email-stefanha@redhat.com
This function is correct but we should document the constraint that
everything must be thread-safe.
Emitting QMP events and scheduling BHs are both thread-safe so nothing
needs to be done here.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1413889440-32577-5-git-send-email-stefanha@redhat.com
When an emulated storage controller is unrealized it will call
blockdev_mark_auto_del(). This will cancel any running block job (and
that eventually releases its reference to the BDS so it can be freed).
Since the block job may be executing in another AioContext we must
acquire/release to ensure thread safety.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1413889440-32577-4-git-send-email-stefanha@redhat.com
Make sure that query-block-jobs acquires the BlockDriverState
AioContext so that the blockjob isn't running in another thread while we
access its state.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1413889440-32577-3-git-send-email-stefanha@redhat.com
block-job-set-speed, block-job-cancel, block-job-pause,
block-job-resume, and block-job-complete must acquire the
BlockDriverState AioContext so that it is safe to access bs.
At the moment bs->job is always NULL when dataplane is active because op
blockers prevent blockjobs from starting. Once the rest of the blockjob
API has been made aware of AioContext we can drop the op blocker.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1413889440-32577-2-git-send-email-stefanha@redhat.com
Move device model attachment / detachment and the BlockDevOps device
model callbacks and their wrappers from BlockDriverState to
BlockBackend.
Wrapper calls in block.c change from
bdrv_dev_FOO_cb(bs, ...)
to
if (bs->blk) {
bdrv_dev_FOO_cb(bs->blk, ...);
}
No change, because both bdrv_dev_change_media_cb() and
bdrv_dev_resize_cb() do nothing when no device model is attached, and
a device model can be attached only when bs->blk.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Much more command code needs conversion. I'm converting these now
because they're using bdrv_dev_* functions, which I'm about to lift
into BlockBackend.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
blockdev_init() always creates a DriveInfo, but only drive_new() fills
it in. qmp_blockdev_add() leaves it blank. This results in a drive
with type = IF_IDE, bus = 0, unit = 0. Screwed up in commit ee13ed1c.
Board initialization code looking for IDE drive (0,0) can pick up one
of these bogus drives. The QMP command has to execute really early to
be visible. Not sure how likely that is in practice.
Fix by creating DriveInfo in drive_new(). Block backends created by
blockdev-add don't get one.
Breaks the test for "has been created by qmp_blockdev_add()" in
blockdev_mark_auto_del() and do_drive_del(), because it changes the
value of dinfo && !dinfo->enable_auto_del from true to false. Simply
test !dinfo instead.
Leaves DriveInfo member enable_auto_del unused. Drop it.
A few places assume a block backend always has a DriveInfo. Fix them
up.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Device models should access their block backends only through the
block-backend.h API. Convert them, and drop direct includes of
inappropriate headers.
Just four uses of BlockDriverState are left:
* The Xen paravirtual block device backend (xen_disk.c) opens images
itself when set up via xenbus, bypassing blockdev.c. I figure it
should go through qmp_blockdev_add() instead.
* Device model "usb-storage" prompts for keys. No other device model
does, and this one probably shouldn't do it, either.
* ide_issue_trim_cb() uses bdrv_aio_discard() instead of
blk_aio_discard() because it fishes its backend out of a BlockAIOCB,
which has only the BlockDriverState.
* PC87312State has an unused BlockDriverState[] member.
The next two commits take care of the latter two.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The patch is big, but all it really does is replacing
dinfo->bdrv
by
blk_bs(blk_by_legacy_dinfo(dinfo))
The replacement is repetitive, but the conversion of device models to
BlockBackend is imminent, and will shorten it to just
blk_legacy_dinfo(dinfo).
Line wrapping muddies the waters a bit. I also omit tests whether
dinfo->bdrv is null, because it never is.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
drive_del() has become a trivial wrapper around blk_unref(). Get rid
of it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
On BlockBackend destruction, unref its BlockDriverState. Replaces the
callers' unrefs.
This turns the pointer from BlockBackend to BlockDriverState into a
strong reference, managed with bdrv_ref() / bdrv_unref(). The
back-pointer remains weak.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make the BlockBackend own the DriveInfo. Change blockdev_init() to
return the BlockBackend instead of the DriveInfo.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Convenience function blk_new_with_bs() creates a BlockBackend with its
BlockDriverState. Callers have to unref both. The commit after next
will relieve them of the need to unref the BlockDriverState.
Complication: due to the silly way drive_del works, we need a way to
hide a BlockBackend, just like bdrv_make_anon(). To emphasize its
"special" status, give the function a suitably off-putting name:
blk_hide_on_behalf_of_do_drive_del(). Unfortunately, hiding turns the
BlockBackend's name into the empty string. Can't avoid that without
breaking the blk->bs->device_name equals blk->name invariant.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A block device consists of a frontend device model and a backend.
A block backend has a tree of block drivers doing the actual work.
The tree is managed by the block layer.
We currently use a single abstraction BlockDriverState both for tree
nodes and the backend as a whole. Drawbacks:
* Its API includes both stuff that makes sense only at the block
backend level (root of the tree) and stuff that's only for use
within the block layer. This makes the API bigger and more complex
than necessary. Moreover, it's not obvious which interfaces are
meant for device models, and which really aren't.
* Since device models keep a reference to their backend, the backend
object can't just be destroyed. But for media change, we need to
replace the tree. Our solution is to make the BlockDriverState
generic, with actual driver state in a separate object, pointed to
by member opaque. That lets us replace the tree by deinitializing
and reinitializing its root. This special need of the root makes
the data structure awkward everywhere in the tree.
The general plan is to separate the APIs into "block backend", for use
by device models, monitor and whatever other code dealing with block
backends, and "block driver", for use by the block layer and whatever
other code (if any) dealing with trees and tree nodes.
Code dealing with block backends, device models in particular, should
become completely oblivious of BlockDriverState. This should let us
clean up both APIs, and the tree data structures.
This commit is a first step. It creates a minimal "block backend"
API: type BlockBackend and functions to create, destroy and find them.
BlockBackend objects are created and destroyed exactly when root
BlockDriverState objects are created and destroyed. "Root" in the
sense of "in bdrv_states". They're not yet used for anything; that'll
come shortly.
A root BlockDriverState is created with bdrv_new_root(), so where to
create a BlockBackend is obvious. Where these roots get destroyed
isn't always as obvious.
It is obvious in qemu-img.c, qemu-io.c and qemu-nbd.c, and in error
paths of blockdev_init(), blk_connect(). That leaves destruction of
objects successfully created by blockdev_init() and blk_connect().
blockdev_init() is used only by drive_new() and qmp_blockdev_add().
Objects created by the latter are currently indestructible (see commit
48f364d "blockdev: Refuse to drive_del something added with
blockdev-add" and commit 2d246f0 "blockdev: Introduce
DriveInfo.enable_auto_del"). Objects created by the former get
destroyed by drive_del().
Objects created by blk_connect() get destroyed by blk_disconnect().
BlockBackend is reference-counted. Its reference count never exceeds
one so far, but that's going to change.
In drive_del(), the BB's reference count is surely one now. The BDS's
reference count is greater than one when something else is holding a
reference, such as a block job. In this case, the BB is destroyed
right away, but the BDS lives on until all extra references get
dropped.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Creating an anonymous BDS can't fail. Make that obvious.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of duplicating the logic for the if_ide
(bus,unit) mappings, rely on the blockdev layer
for managing those mappings for us, and use the
drive_get_by_index call instead.
This allows ide_drive_get to work for AHCI HBAs
as well, and can be used in the Q35 initialization.
Lastly, change the nature of the argument to
ide_drive_get so that represents the number of
total drives we can support, and not the total
number of buses. This will prevent array overflows
if the units-per-default-bus property ever needs
to be adjusted for compatibility reasons.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1412187569-23452-5-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The if_max_devs table as in the past been an immutable
default that controls the mapping of index => (bus,unit)
for all boards and all HBAs for each interface type.
Since adding this mapping information to the HBA device
itself is currently unwieldly from the perspective of
retrieving this information at option parsing time
(e.g, within drive_new), we consider the alternative
of marking the if_max_devs table mutable so that
later configuration and initialization can adjust the
mapping at will, but only up until a drive is added,
at which point the mapping is finalized.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1412187569-23452-3-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When users use command line options like -hda, -cdrom,
or even -drive if=ide, it is up to the board initialization
routines to pick up these drives and create backing
devices for them.
Some boards, like Q35, have not been doing this.
However, there is no warning explaining why certain
drive specifications are just silently ignored,
so this function adds a check to print some warnings
to assist users in debugging these sorts of issues
in the future.
This patch will not warn about drives added with if_none,
for which it is not possible to tell in advance if
the omission of a backing device is an issue.
A warning in these cases is considered appropriate.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1412187569-23452-2-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add realization of rename all items in opts for qemu_opt_rename.
e.g:
When add bps twice in command line, need to rename all bps to
throttling.bps-total.
This patch solved following bug:
Bug 1145586 - qemu-kvm will give strange hint when add bps twice for a drive
ref:https://bugzilla.redhat.com/show_bug.cgi?id=1145586
[Resolved conflict with commit 5abbf0ee4d
("block: Catch simultaneous usage of options and their aliases"). Check
for simultaneous use first, and then loop over all options.
--Stefan]
Signed-off-by: Jun Li <junmuzi@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1411537527-16715-1-git-send-email-junmuzi@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1411999675-14533-1-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
While thinking about precedence of conflicting block device options from
different sources, I noticed that you can specify both an option and its
legacy alias at the same time (e.g. readonly=on,read-only=off). Rather
than specifying the order of precedence, we should simply forbid such
combinations.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Instead of a series of qemu_opt_rename() calls, use an array that
contains all of the renames and call qemu_opt_rename() in a loop. This
will keep the code readable even when we add an error return to
qemu_opt_rename().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
If the BDS's refcnt > 0, drive_del() destroys the DriveInfo, but not
the BDS. This can happen in three places:
* Device model destruction during unplug: blockdev_auto_del()
* Xen IDE unplug: pci_piix3_xen_ide_unplug()
* drive_del command when no device model is attached: do_drive_del()
The other callers of drive_del are on error paths where refcnt == 1.
If the user somehow manages to plug in a device model using a BDS that
has gone through drive_del(), the legacy configuration passed in
DriveInfo doesn't reach the device model, and automatic deletion on
unplug doesn't work. Worse, some device models such as scsi-disk
crash when DriveInfo doesn't exist.
This is theoretical; I didn't research an actual reproducer. The problem
was introduced when we replaced DriveInfo reference counting by BDS
reference counting in commit a94a3fa..fa510eb.
Fix by keeping DriveInfo alive until its BDS dies.
This affects qemu_drive_opts: now you can't reuse the same ID for new
drive options until the BDS dies. Before, you could, but since the
code always attempts to create a BDS with the same ID next, the
enclosing operation "create a new drive" failed anyway. Different
error path, same result.
Unfortunately, the fix involves use of blockdev.c stuff from block.c,
which is a layering violation. Fortunately, my forthcoming
BlockBackend work will get rid of it again.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
blockdev_init() mixes up BlockDriverState and DriveInfo initialization
Finish the BlockDriverState job before starting to mess with
DriveInfo. Easier on the eyes.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For some device models, the guest can prevent unplug. Some users need a
way to forcibly revoke device model access to the block backend then, so
the underlying images can be safely used for something else.
drive_del lets you do that. Unfortunately, it conflates revoking access
with destroying the backend.
Commit 9063f81 made drive_del immediately destroy the root BDS. Nice:
the device name becomes available for reuse immediately. Not so nice:
the device model's pointer to the root BDS dangles, and we're prone to
crash when the memory gets reused.
Commit d22b2f4 fixed that by hiding the root BDS instead of destroying
it. Destruction only happens on unplug. "Hiding" means removing it
from bdrv_states and graph_bdrv_states; see bdrv_make_anon().
This "destroy on revoke" is a misfeature we don't want to carry
forward to blockdev-add, just like "destroy on unplug" (commit
2d246f0). So make drive_del fail on anything added with blockdev-add.
We'll add separate QMP commands to revoke device model access and to
destroy backends.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
relaxing the license to LGPLv2+ is intentional.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit.canet@nodalink.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Make drive_del safe for dataplane where another thread may be running
the BlockDriverState's AioContext.
Note the assumption that AioContext's lifetime exceeds DriveInfo and
BlockDriverState. We release AioContext after DriveInfo and
BlockDriverState are potentially freed.
This is clearly safe with the global AioContext but also with -object
iothread and implicit iothreads created by -device
virtio-blk-pci,x-data-plane=on (their lifetime is tied to DeviceState,
not BlockDriverState).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Name the 'granularity' parameter and give its expected value range.
Previously the device name was mistakenly reported as the parameter
name.
Note that the error class is unchanged from ERROR_CLASS_GENERIC_ERROR.
Reported-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Make block_resize safe for dataplane where another thread may be running
the BlockDriverState's AioContext.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
Patch created with Coccinelle, with two manual changes on top:
* Add const to bdrv_iterate_format() to keep the types straight
* Convert the allocation in bdrv_drop_intermediate(), which Coccinelle
inexplicably misses
Coccinelle semantic patch:
@@
type T;
@@
-g_malloc(sizeof(T))
+g_new(T, 1)
@@
type T;
@@
-g_try_malloc(sizeof(T))
+g_try_new(T, 1)
@@
type T;
@@
-g_malloc0(sizeof(T))
+g_new0(T, 1)
@@
type T;
@@
-g_try_malloc0(sizeof(T))
+g_try_new0(T, 1)
@@
type T;
expression n;
@@
-g_malloc(sizeof(T) * (n))
+g_new(T, n)
@@
type T;
expression n;
@@
-g_try_malloc(sizeof(T) * (n))
+g_try_new(T, n)
@@
type T;
expression n;
@@
-g_malloc0(sizeof(T) * (n))
+g_new0(T, n)
@@
type T;
expression n;
@@
-g_try_malloc0(sizeof(T) * (n))
+g_try_new0(T, n)
@@
type T;
expression p, n;
@@
-g_realloc(p, sizeof(T) * (n))
+g_renew(T, p, n)
@@
type T;
expression p, n;
@@
-g_try_realloc(p, sizeof(T) * (n))
+g_try_renew(T, p, n)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
On some image chains, QEMU may not always be able to resolve the
filenames properly, when updating the backing file of an image
after a block job.
For instance, certain relative pathnames may fail, or drives may
have been specified originally by file descriptor (e.g. /dev/fd/???),
or a relative protocol pathname may have been used.
In these instances, QEMU may lack the information to be able to make
the correct choice, but the user or management layer most likely does
have that knowledge.
With this extension to the block-stream api, the user is able to change
the backing file of the active layer as part of the block-stream
operation.
This allows the change to be 'safe', in the sense that if the attempt
to write the active image metadata fails, then the block-stream
operation returns failure, without disrupting the guest.
If a backing file string is not specified in the command, the backing
file string to use is determined in the same manner as it was
previously.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
On some image chains, QEMU may not always be able to resolve the
filenames properly, when updating the backing file of an image
after a block commit.
For instance, certain relative pathnames may fail, or drives may
have been specified originally by file descriptor (e.g. /dev/fd/???),
or a relative protocol pathname may have been used.
In these instances, QEMU may lack the information to be able to make
the correct choice, but the user or management layer most likely does
have that knowledge.
With this extension to the block-commit api, the user is able to change
the backing file of the overlay image as part of the block-commit
operation.
This allows the change to be 'safe', in the sense that if the attempt
to write the overlay image metadata fails, then the block-commit
operation returns failure, without disrupting the guest.
If the commit top is the active layer, then specifying the backing
file string will be treated as an error (there is no overlay image
to modify in that case).
If a backing file string is not specified in the command, the backing
file string to use is determined in the same manner as it was
previously.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This allows a user to make a live change to the backing file recorded in
an open image.
The image file to modify can be specified 2 ways:
1) image filename
2) image node-name
Note: this does not cause the backing file itself to be reopened; it
merely changes the backing filename in the image file structure, and
in internal BDS structures.
It is the responsibility of the user to pass a filename string that
can be resolved when the image chain is reopened, and the filename
string is not validated.
A good analogy for this command is that it is a live version of
'qemu-img rebase -u', with respect to changing the backing file string.
[Jeff is offline so I respun this patch in his absence. Dropped image
filename since using node-name is preferred and this is a new command.
No need to introduce the limitations of finding images by filename.
--Stefan]
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that active layer block-commit is supported, the 'top' argument
no longer needs to be mandatory.
Change it to optional, with the default being the active layer in the
device chain.
[kwolf: Rebased and resolved conflict in tests/qemu-iotests/040]
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
drive-mirror will bdrv_swap the new BDS named node-name with the one
pointed by replaces when the mirroring is finished.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This new argument can be used to specify the node-name of the new mirrored BDS.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If we check for the RESIZE blocker in bdrv_truncate(), that means a
commit will fail if the overlay layer is larger than the base, due to
the backing blocker.
This is a regression in behavior from 2.0; currently, commit will try to
grow the size of the base image to match the overlay size, if the
overlay size is larger.
By moving this into the QMP command qmp_block_resize(), it allows
usage of bdrv_truncate() within block jobs.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since BLOCK_JOB_COMPLETED, BLOCK_JOB_CANCELLED, BLOCK_JOB_READY are
related, convert them in one patch. The block_job_event_* functions
are used to keep encapsulation of BlockJob structure.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
It's always one since commit fa510eb dropped the last drive_get_ref().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
"Init" and "uninit" suggest the functions don't allocate / free
storage. But they do.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The block_set_io_throttle QMP and HMP commands modify I/O throttling
limits for block devices.
Acquire the BlockDriverState's AioContext to protect against race
conditions with an IOThread that is running I/O for this device.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
bs_opts is leaked on all paths from its qdev_new() that don't got
through blockdev_init(). Add the missing QDECREF(), and zap bs_opts
after blockdev_init(), so the new QDECREF() does nothing when we go
through blockdev_init().
Leak introduced in commit f298d07. Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
blockdev_init() leaks bs_opts when qemu_opts_create() fails, i.e. when
the ID is bad. Missed in commit ec9c10d.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi
Markus Armbruster
John Snow
Jun Li
Kevin Wolf
Peter Lieven
Jeff Cody
Benoît Canet
Wenchao Xia