It can be used outside of block.c for making user friendly messages.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Noticed while checking Coccinelle results. Naming a label 'out:'
when it is only used on error paths is weird. Also, we had some
dead stores to 'ret'. Meanwhile we know that snapshot_options
is NULL on success and that QDECREF(NULL) is safe. So merge the
two exit paths into one by careful control over bs_snapshot.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170427215821.19397-8-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We now have macros in place to make it less verbose to add a scalar
to QDict and QList, so use them.
Patch created mechanically via:
spatch --sp-file scripts/coccinelle/qobject.cocci \
--macro-file scripts/cocci-macro-file.h --dir . --in-place
then touched up manually to fix a couple of '?:' back to original
spacing, as well as avoiding a long line in monitor.c.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170427215821.19397-7-eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We have macros in place to make it less verbose to add a subtype
of QObject to both QDict and QList. While we have made cleanups
like this in the past (see commit fcfcd8ffc, for example), having
it be automated by Coccinelle makes it easier to maintain.
Patch created mechanically via:
spatch --sp-file scripts/coccinelle/qobject.cocci \
--macro-file scripts/cocci-macro-file.h --dir . --in-place
then I verified that no manual touchups were required.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170427215821.19397-5-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
As long as BDRV_O_INACTIVE is set, the image file is only opened so we
have a file descriptor for it. We're definitely not supposed to modify
the image, it's still owned by the migration source.
This commit is an addition to 09e0c771 but the assert() is added to
bdrv_truncate().
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
Message-id: 1491405505-31620-3-git-send-email-den@openvz.org
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add missing error messages for the block driver implementations of
.bdrv_truncate(); drop the generic one from block.c's bdrv_truncate().
Since one of these changes touches a mis-indented block in
block/file-posix.c, this patch fixes that coding style issue along the
way.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170328205129.15138-5-mreitz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add an Error parameter to the block drivers' bdrv_truncate() interface.
If a block driver does not set this in case of an error, the generic
bdrv_truncate() implementation will do so.
Where it is obvious, this patch also makes some block drivers set this
value.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170328205129.15138-4-mreitz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
For one thing, this allows us to drop the error message generation from
qemu-img.c and blockdev.c and instead have it unified in
bdrv_truncate().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170328205129.15138-3-mreitz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reproducer:
$ ./qemu-img info ''
qemu-img: ./block.c:1008: bdrv_open_driver: Assertion
`!drv->bdrv_needs_filename || bs->filename[0]' failed.
[1] 26105 abort (core dumped) ./qemu-img info ''
This patch fixes this to be:
$ ./qemu-img info ''
qemu-img: Could not open '': The 'file' block driver requires a file
name
Cc: qemu-stable <qemu-stable@nongnu.org>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This reverts commit e3e0003a8f.
This commit was necessary for the 2.9 release because we were unable to
fix the underlying issue(s) in time. However, we will be for 2.10.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduce check function for setting read_only flags. Will return < 0 on
error, with appropriate Error value set. Does not alter any flags.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: e2bba34ac3bc76a0c42adc390413f358ae0566e8.1491597120.git.jcody@redhat.com
The BDRV_O_ALLOW_RDWR flag allows / prohibits the changing of
the BDS 'read_only' state, but there are a few places where it
is ignored. In the bdrv_set_read_only() helper, make sure to
honor the flag.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: be2e5fb2d285cbece2b6d06bed54a6f56520d251.1491597120.git.jcody@redhat.com
A few block drivers will set the BDS read_only flag from their
.bdrv_open() function. This means the bs->read_only flag could
be set after we enable copy_on_read, as the BDRV_O_COPY_ON_READ
flag check occurs prior to the call to bdrv->bdrv_open().
This adds an error return to bdrv_set_read_only(), and an error will be
return if we try to set the BDS to read_only while copy_on_read is
enabled.
This patch also changes the behavior of vvfat. Before, vvfat could
override the drive 'readonly' flag with its own, internal 'rw' flag.
For instance, this -drive parameter would result in a writable image:
"-drive format=vvfat,dir=/tmp/vvfat,rw,if=virtio,readonly=on"
This is not correct. Now, attempting to use the above -drive parameter
will result in an error (i.e., 'rw' is incompatible with 'readonly=on').
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 0c5b4c1cc2c651471b131f21376dfd5ea24d2196.1491597120.git.jcody@redhat.com
We have a helper wrapper for checking for the BDS read_only flag,
add a helper wrapper to set the read_only flag as well.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 9b18972d05f5fa2ac16c014f0af98d680553048d.1491597120.git.jcody@redhat.com
In case of block migration, there may be writes to BlockBackends that do
not have the write permission taken. Before this issue is fixed (which
is not going to happen in 2.9), we therefore cannot assert that this is
the case.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20170411145050.31290-1-mreitz@redhat.com
Tested-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The fact that the bs->aio_context is changing can confuse the dataplane
iothread, because of the now fine granularity aio context lock.
bdrv_drain should rather be a bdrv_drained_begin/end pair, but since
bs->aio_context is changing, we can just use aio_disable_external and
bdrv_parent_drained_begin.
Reported-by: Ed Swierk <eswierk@skyportsystems.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
-blockdev and blockdev_add convert their arguments via QObject to
BlockdevOptions for qmp_blockdev_add(), which converts them back to
QObject, then to a flattened QDict. The QDict's members are typed
according to the QAPI schema.
-drive converts its argument via QemuOpts to a (flat) QDict. This
QDict's members are all QString.
Thus, the QType of a flat QDict member depends on whether it comes
from -drive or -blockdev/blockdev_add, except when the QAPI type maps
to QString, which is the case for 'str' and enumeration types.
The block layer core extracts generic configuration from the flat
QDict, and the block driver extracts driver-specific configuration.
Both commonly do so by converting (parts of) the flat QDict to
QemuOpts, which turns all values into strings. Not exactly elegant,
but correct.
However, A few places access the flat QDict directly:
* Most of them access members that are always QString. Correct.
* bdrv_open_inherit() accesses a boolean, carefully. Correct.
* nfs_config() uses a QObject input visitor. Correct only because the
visited type contains nothing but QStrings.
* nbd_config() and ssh_config() use a QObject input visitor, and the
visited types contain non-QStrings: InetSocketAddress members
@numeric, @to, @ipv4, @ipv6. -drive works as long as you don't try
to use them (they're all optional). @to is ignored anyway.
Reproducer:
-drive driver=ssh,server.host=h,server.port=22,server.ipv4,path=p
-drive driver=nbd,server.type=inet,server.data.host=h,server.data.port=22,server.data.ipv4
both fail with "Invalid parameter type for 'data.ipv4', expected: boolean"
Add suitable comments to all these places. Mark the buggy ones FIXME.
"Fortunately", -drive's driver-specific options are entirely
undocumented.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1490895797-29094-5-git-send-email-armbru@redhat.com
[mreitz: Fixed two typos]
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
While it is true that bdrv_set_aio_context only works on a single
BlockDriverState subtree (see commit message for 53ec73e, "block: Use
bdrv_drain to replace uncessary bdrv_drain_all", 2015-07-07), it works
at the AioContext level rather than the BlockDriverState level.
Therefore, it is also necessary to trigger pending bottom halves too,
even if no requests are pending.
For NBD this ensures that the aio_co_schedule of a previous call to
nbd_attach_aio_context is completed before detaching from the old
AioContext; it fixes qemu-iotest 094. Another similar bug happens
when the VM is stopped and the virtio-blk dataplane irqfd is torn down.
In this case it's possible that guest I/O gets stuck if notify_guest_bh
was scheduled but doesn't run.
Calling aio_poll from another AioContext is safe if non-blocking; races
such as the one mentioned in the commit message for c9d1a56 ("block:
only call aio_poll on the current thread's AioContext", 2016-10-28)
are a concern for blocking calls.
I considered other options, including:
- moving the bs->wakeup mechanism to AioContext, and letting the caller
check. This might work for virtio which has a clear place to wakeup
(notify_place_bh) and check the condition (virtio_blk_data_plane_stop).
For aio_co_schedule I couldn't find a clear place to check the condition.
- adding a dummy oneshot bottom half and waiting for it to trigger.
This has the complication that bottom half list is LIFO for historical
reasons. There were performance issues caused by bottom half ordering
in the past, so I decided against it for 2.9.
Fixes: 9972354856
Reported-by: Max Reitz <mreitz@redhat.com>
Reported-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Tested-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20170314111157.14464-2-pbonzini@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
bdrv_child_set_perm alone is not very usable because the caller must
call bdrv_child_check_perm first. This is already encapsulated
conveniently in bdrv_child_try_set_perm, so remove the other prototypes
from the header and fix the one wrong caller, block/mirror.c.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In bdrv_open_inherit(), the filename is refreshed after opening the
backing file, but we neglected to do the same when the backing file
changes later.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
All callers pass false now, so the parameter can go away again.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <1488317230-26248-14-git-send-email-armbru@redhat.com>
The next few commits will put the errors to use where appropriate.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1488317230-26248-13-git-send-email-armbru@redhat.com>
When adding an Error parameter, bdrv_replace_in_backing_chain() would
become nothing more than a wrapper around change_parent_backing_link().
So make the latter public, renamed as bdrv_replace_node(), and remove
bdrv_replace_in_backing_chain().
Most of the callers just remove a node from the graph that they just
inserted, so they can use &error_abort, but completion of a mirror job
with 'replaces' set can actually fail.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Instead of just trying to change parents by parent over to reference @to
instead of @from, and abort()ing whenever the permissions don't allow
this, do proper permission checking beforehand and pass any error to the
callers.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
change_parent_backing_link() will need to update multiple BdrvChild
objects at once. Checking permissions reference by reference doesn't
work because permissions need to be consistent only with all parents
moved to the new child.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Aborting on error in bdrv_append() isn't correct. This patch fixes it
and lets the callers handle failures.
Test case 085 needs a reference output update. This is caused by the
reversed order of bdrv_set_backing_hd() and change_parent_backing_link()
in bdrv_append(): When the backing file of the new node is set, the
parent nodes are still pointing to the old top, so the backing blocker
is now initialised with the node name rather than the BlockBackend name.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Not all callers of bdrv_set_backing_hd() know for sure that attaching
the backing file will be allowed by the permission system. Return the
error from the function rather than aborting.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This adds an assertion that ensures that the necessary resize permission
has been granted before bdrv_truncate() is called.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Now that the backing file child role implements .attach/.detach
callbacks, nothing prevents us from modifying the graph even if that
involves changing backing file links.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Backing files are somewhat special compared to other kinds of children
because they are attached and detached using bdrv_set_backing_hd()
rather than the normal set of functions, which does a few more things
like setting backing blockers, toggling the BDRV_O_NO_BACKING flag,
setting parent_bs->backing_file, etc.
These special features are a reason why change_parent_backing_link()
can't handle backing files yet. With abstracting the additional features
into .attach/.detach callbacks, we get a step closer to a function that
can actually deal with this.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
bdrv_append() cares about isolation of the node that it modifies, but
not about activity in some subtree below it. Instead of using the
recursive bdrv_requests_pending(), directly check bs->in_flight, which
considers only the node in question.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
When the parents' child links are updated in bdrv_append() or
bdrv_replace_in_backing_chain(), this should affect all child links of
BlockBackends or other nodes, but not on child links held for other
purposes (like for setting permissions). This patch allows to control
the behaviour per BdrvChildRole.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Instead of just telling that there was some conflict, we can be specific
and tell which permissions were in conflict and which way the conflict
is.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
For meaningful error messages in the permission system, we need to get
some human-readable description of the parent of a BdrvChild.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Now that blk_insert_bs() requests the BlockBackend permissions for the
node it attaches to, it can fail. Instead of aborting, pass the errors
to the callers.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
We want every user to be specific about the permissions it needs, so
we'll pass the initial permissions as parameters to blk_new(). A user
only needs to call blk_set_perm() if it wants to change the permissions
after the fact.
The permissions are stored in the BlockBackend and applied whenever a
BlockDriverState should be attached in blk_insert_bs().
This does not include actually choosing the right set of permissions
everywhere yet. Instead, the usual FIXME comment is added to each place
and will be addressed in individual patches.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Now that all block drivers with children tell us what permissions they
need from each of their children, bdrv_attach_child() can use this
information and make the right requirements while trying to attach new
children.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
All block drivers that can have child nodes implement .bdrv_child_perm()
now. Make this officially a requirement by asserting that only drivers
without children can omit .bdrv_child_perm().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
vvfat is the last remaining driver that can have children, but doesn't
implement .bdrv_child_perm() yet. The default handlers aren't suitable
here, so let's implement a very simple driver-specific one that protects
the internal child from being used by other users as good as our
permissions permit.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Fam Zheng
Eric Blake
Denis V. Lunev
Max Reitz
Jeff Cody
Markus Armbruster
Paolo Bonzini
Kevin Wolf
Peter Maydell