Commit Graph

229 Commits

Author SHA1 Message Date
John Snow 5403432f39 qmp-commands: Fix typo
Just a trivial patch to correct a QMP example in qmp-commands.hx.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-04-30 16:06:17 +03:00
John Snow e74e6b78e6 qmp: add block-dirty-bitmap-clear
Add bdrv_clear_dirty_bitmap and a matching QMP command,
qmp_block_dirty_bitmap_clear that enables a user to reset
the bitmap attached to a drive.

This allows us to reset a bitmap in the event of a full
drive backup.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1429314609-29776-12-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-04-28 15:36:10 +02:00
John Snow d58d845397 qmp: Add support of "dirty-bitmap" sync mode for drive-backup
For "dirty-bitmap" sync mode, the block job will iterate through the
given dirty bitmap to decide if a sector needs backup (backup all the
dirty clusters and skip clean ones), just as allocation conditions of
"top" sync mode.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1429314609-29776-11-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-04-28 15:36:10 +02:00
John Snow 341ebc2f81 qmp: Add block-dirty-bitmap-add and block-dirty-bitmap-remove
The new command pair is added to manage a user created dirty bitmap. The
dirty bitmap's name is mandatory and must be unique for the same device,
but different devices can have bitmaps with the same names.

The granularity is an optional field. If it is not specified, we will
choose a default granularity based on the cluster size if available,
clamped to between 4K and 64K to mirror how the 'mirror' code was
already choosing granularity. If we do not have cluster size info
available, we choose 64K. This code has been factored out into a helper
shared with block/mirror.

This patch also introduces the 'block_dirty_bitmap_lookup' helper,
which takes a device name and a dirty bitmap name and validates the
lookup, returning NULL and setting errp if there is a problem with
either field. This helper will be re-used in future patches in this
series.

The types added to block-core.json will be re-used in future patches
in this series, see:
'qapi: Add transaction support to block-dirty-bitmap-{add, enable, disable}'

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1429314609-29776-5-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-04-28 15:36:10 +02:00
Stefan Hajnoczi ec683d6040 block: document block-stream in qmp-commands.hx
The 'block-stream' QMP command is documented in block-core.json but not
qmp-commands.hx.  Add a summary of the command to qmp-commands.hx
(similar to the documentation for 'block-commit').

Reported-by: Kashyap Chamarthy <kchamart@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1429094622-26218-1-git-send-email-stefanha@redhat.com
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-04-28 15:36:09 +02:00
Peter Maydell 3d27b09cf6 spice: misc fixes.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJVPhd0AAoJEEy22O7T6HE4sMkQAK9TcUjMKvKf7k20WsFBDgkc
 RS/NHEHNrrscnWz+n845NDueFvYAa7DfAKok0ayzD5XSK2RC3AkcGsQ/PF21kg5t
 +9B0y7YIdJoAt+9w+SulwF6hcK9wWBx0NOUWJomoZWntZcawAv5pTOTvcLR2TJhN
 eGHuI1lw/Hnsqr0vYXqkFdNNB66zA24oZiaryxsy/TMpd6vlGX3JIvDaLcTden1W
 u0Fmta5JEDlPCiPIBVxau88U21pDeg6PHEHmWhkeLo45Tsr+R+dB72Ugbguihr1x
 LRpzQtZoq8gqyqY2+r1lOS5cHNvCkqZhtDK80Aeo2UPxlg88YPMFvonTuvY8Y8Jm
 6Mq1gepyI48LdoKwoL8S2ja5W8++unS6kd1oP1fxqalWqFI8mwIB1v4W75a4ejxq
 drbVWY4jnJDkNiz8BKmg9GLE4mEConei0Ip/lbgflESbjJ9g0Y7IGoc91cjsCXCv
 1MuAphNrkwLSckJpNxooKzO7MMhYFw9PGNX26RWE64iRnwMFCsqOxE1KC7rzdnZY
 Y09fVV+GC1h5XyH25M5cyMCV5r/S/eM1Y6GEhq/OS8xmunGp2WKB7rmaoLMlioMs
 SiPExlwTaqiZldBHfB71h2E41C7awcmcmY+NsORSxIEg6eTyT4/jljQQXGiwm0JA
 IcfrFHJHvmmWPL6CLwS0
 =Vi97
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/spice/tags/pull-spice-20150427-1' into staging

spice: misc fixes.

# gpg: Signature made Mon Apr 27 12:03:16 2015 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/spice/tags/pull-spice-20150427-1:
  spice: learn to hide cursor
  spice: set pointer position on hotspot
  spice: fix mouse cursor position
  spice: fix simple display on bigendian hosts
  monitor: Make client_migrate_info synchronous

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-04-27 20:00:57 +01:00
Markus Armbruster 3b5704b2f8 monitor: Make client_migrate_info synchronous
Live migration with spice works like this today:

  (1) client_migrate_info monitor cmd
  (2) spice server notifies client, client connects to target host.
  (3) qemu waits until spice client connect is finished.
  (4) send over vmstate (i.e. main part of live migration).
  (5) spice handover to target host.

(3) is implemented by making client_migrate_info a async monitor
command.  This is the only async monitor command we have.

The original reason to implement this dance was that qemu did not accept
new tcp connections while the incoming migration was running, so (2) and
(4) could not be done in parallel.  That issue was fixed long ago though.
Qemu version 1.3.0 (released Dec 2012) and newer happily accept tcp
connects while the incoming migration runs.

Time to drop step (3).  This patch does exactly that, by making the
monitor command synchronous and removing the code needed to handle the
async monitor command in ui/spice-core.c

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-04-27 12:46:57 +02:00
Paolo Bonzini 43d0a2c1af qmp-commands: fix incorrect uses of ":O" specifier
As far as the QMP parser is concerned, neither the 'O' nor the 'q' format specifiers
put any constraint on the command.  However, there are two differences:

1) from a documentation point of view 'O' says that this command takes
a dictionary.  The dictionary will be converted to QemuOpts in the
handler to match the corresponding HMP command.

2) 'O' sets QMP_ACCEPT_UNKNOWNS, resulting in the command accepting invalid
extra arguments.  For example the following is accepted:

   { "execute": "send-key",
        "arguments": { "keys": [ { "type": "qcode", "data": "ctrl" },
                                 { "type": "qcode", "data": "alt" },
                                 { "type": "qcode", "data": "delete" } ], "foo": "bar" } }

Neither send-key nor migrate-set-capabilities take a QemuOpts-like
dictionary; they take an array of dictionaries.  And neither command
really wants to have extra unknown arguments.  Thus, the right
specifier to use in this case is 'q'; with this patch the above
command fails with

   {"error": {"class": "GenericError", "desc": "Invalid parameter 'foo'"}}

as intended.

Reported-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-04-24 14:18:06 -04:00
Markus Armbruster da2cf4e803 block: Document blockdev-add's immaturity
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1426858337-21423-1-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-27 10:01:12 +00:00
Peter Maydell 3e5f6234b4 Block patches for 2.3.0-rc1
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJVCuU+AAoJEH8JsnLIjy/W1b0P/0RYYqkXvIvr5pymOTkA256q
 dPWOqkKB0LHcB1+iOdWDb7TsAfJftZ2MFvN+BQ+mBC3knheLzWlErQLZQsEJh2/b
 x525GKatRzc7LSQ4FPEVJ9MNDILKUQsuIza6/z3NsmmYSFSUNCzyQOS/LAO6ngjs
 cmQ0aLudKy41vGTE8mS6rZOjHf8uumdRPhG5clr5V80zPMg93jojYJ2ENCl6sPuh
 Y2OtVu6HLyX2ExKFmt4JNltxjXnUki+sEBUnCcj8tvJNMGy82IpOdO8w3W9cs2zZ
 cb7XUVKv6IPUycEs4IsGpHUfyIaD5sVY5ueKGGZv35kmFYdItJ9AukHc/5tlVspR
 kFYEGOjZRqRXboeH8VJDJWHBlIfKeoE6iwCBW62D0Bzbab8DMWbzif32b3K5dnve
 OleFjFS0mysUfuxoIqF12SUwZj+WzW1CaxOTAGALIrfYfOD5ZWOHiLeXbQ/fcaAW
 quz+/9B9CzIAbTL31RxcOXfvyuUWlWkZyz6GYxaLhzLF580Uz/qvBqbMrXDQWUzs
 x6udW7aylqBalSXpc29ORv5cIpA4p+IBzFpfVtwV9+Qa86nTfJJSq4u2oet/vtyb
 KiZ+AcKUiaChwheeQHSCcqjQ5dzhJvl/6UvwCLORLYuNExrE+1Umn/Cz33eDibxi
 kUW1xvRYe/pkSGdntlz0
 =Hs5n
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block patches for 2.3.0-rc1

# gpg: Signature made Thu Mar 19 15:03:26 2015 GMT using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"

* remotes/kevin/tags/for-upstream:
  block: Fix blockdev-backup not to use funky error class
  raw-posix: Deprecate aio=threads fallback without O_DIRECT
  raw-posix: Deprecate host floppy passthrough

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-19 17:47:08 +00:00
Markus Armbruster 92a539d22e raw-posix: Deprecate host floppy passthrough
Raise your hand if you have a physical floppy drive in a computer
you've powered on in 2015.  Okay, I see we got a few weirdos in the
audience.  That's okay, weirdos are welcome here.

Kidding aside, media change detection doesn't fully work, isn't going
to be fixed, and floppy passthrough just isn't earning its keep
anymore.

Deprecate block driver host_floppy now, so we can drop it after a
grace period.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-19 11:43:02 +01:00
Markus Armbruster 293811f6c1 qmp: Drop unused .user_print from command definitions
.user_print isn't used with QMP commands, only with HMP commands.
Copied over when QMP got its own command table in commit 82a56f0.
Most of them have been dropped since, but a few stragglers remain.
Drop them.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-19 11:11:55 +03:00
Dr. David Alan Gilbert bf1ae1f4dc Add migrate_incoming
Add migrate_incoming/migrate-incoming to start an incoming
migration.

Once a qemu has been started with
    -incoming defer

the migration can be started by issuing:
    migrate_incoming uri

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-03-16 14:31:07 +01:00
Alberto Garcia 3599d46ba2 qmp-commands.hx: Fix several typos
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-10 08:15:33 +03:00
Francesco Romani e2462113b2 block: add event when disk usage exceeds threshold
Managing applications, like oVirt (http://www.ovirt.org), make extensive
use of thin-provisioned disk images.
To let the guest run smoothly and be not unnecessarily paused, oVirt sets
a disk usage threshold (so called 'high water mark') based on the occupation
of the device,  and automatically extends the image once the threshold
is reached or exceeded.

In order to detect the crossing of the threshold, oVirt has no choice but
aggressively polling the QEMU monitor using the query-blockstats command.
This lead to unnecessary system load, and is made even worse under scale:
deployments with hundreds of VMs are no longer rare.

To fix this, this patch adds:
* A new monitor command `block-set-write-threshold', to set a mark for
  a given block device.
* A new event `BLOCK_WRITE_THRESHOLD', to report if a block device
  usage exceeds the threshold.
* A new `write_threshold' field into the `BlockDeviceInfo' structure,
  to report the configured threshold.

This will allow the managing application to use smarter and more
efficient monitoring, greatly reducing the need of polling.

[Updated qemu-iotests 067 output to add the new 'write_threshold'
property. --Stefan]
[Changed g_assert_false() to !g_assert() to fix the build on older glib
versions. --Kevin]

Signed-off-by: Francesco Romani <fromani@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1421068273-692-1-git-send-email-fromani@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-02-06 17:24:21 +01:00
Peter Lieven f4564d53c6 block: add accounting for merged requests
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-02-06 17:24:21 +01:00
Gerd Hoffmann df88768460 monitor: add query-vnc-servers command
Add new query vnc qmp command, for the lack of better ideas just name it
"query-vnc-servers".  Changes over query-vnc:

 * It returns a list of vnc servers, so multiple vnc server instances
   are covered.
 * Each vnc server returns a list of server sockets.  Followup patch
   will use that to also report websockets.  In case we add support for
   multiple server sockets server sockets (to better support ipv4+ipv6
   dualstack) we can add them to the list too.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-01-22 11:18:47 +01:00
Fam Zheng c29c1dd312 qmp: Add command 'blockdev-backup'
Similar to drive-backup, but this command uses a device id as target
instead of creating/opening an image file.

Also add blocker on target bs, since the target is also a named device
now.

Add check and report error for bs == target which became possible but is
an illegal case with introduction of blockdev-backup.

Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1418899027-8445-3-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-01-13 11:47:56 +00:00
zhanghailiang d6d69731f5 qmp-command.hx: add missing docs for migration capabilites
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2014-12-16 17:47:35 +05:30
Peter Maydell 99c9c3cb24 trivial patches for 2014-12-11
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUid7mAAoJEL7lnXSkw9fbX0YH/RXeoX7IN1QVEP8Z2dLq4nzt
 igHm4Gd4ENX6pdluHmXAxzKoHR78yNGFegzuv0IJBfav8kGCQWW6zAf4TUk/udtn
 AKPk1yauVKNzCvmYldrfbuu4HedZqkftE0tyDZuAK50pZH1hzX7qiAT1C0OlarLQ
 Tqy4+ouYiRja2hLq4YJCM9mmYt0sbMDShIcHBYRTdD0cxoPZ+JZEeAQYg+FYNdIo
 jioVg8NgmFZW37UWeBTCKG+DcX9NwXwyo/ASdIozM+aQcTBx/nXn7/NOAxXlxUX8
 M9AS9iz+LWBfwof3HLbzLLTvTmE66Z78/TluFMmEbpK4ts0ZXRJKDHE/pfynRD0=
 =PXlQ
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mjt/tags/pull-trivial-patches-2014-12-11' into staging

trivial patches for 2014-12-11

# gpg: Signature made Thu 11 Dec 2014 18:13:58 GMT using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>"
# gpg:                 aka "Michael Tokarev <mjt@debian.org>"

* remotes/mjt/tags/pull-trivial-patches-2014-12-11:
  Sort include/qemu/typedefs.h
  hpet: increase spelling precision
  pflash_cfi02.c: associate "cfi.pflash02" to "Storage devices" category
  vt82c686: fix coverity warning about out-of-bounds write
  virtio: remove useless declaration of virtio_net_init()
  qapi-schema: fix typo about change-vnc-password
  fw_cfg: remove superfluous blank line
  get_maintainer.pl: Remove the --git-chief-penguins option
  configure: Replace which(1) with "has"
  util: Use g_new() & friends where that makes obvious sense
  util: Fuse g_malloc(); memset() into g_new0()
  util: Drop superfluous conditionals around g_free()
  Drop superfluous conditionals around g_strdup()
  Drop superfluous conditionals around qemu_opts_del()
  usb: delete redundant brackets in usb_host_handle_control()
  virtio-bus: avoid breaking build when open DEBUG switch
  acpi-build: Make DPRINTF working for acpi-build
  acpi-build: adjust indention 8 -> 4 spaces
  target-s390x: fix possible out of bounds read
  qmp: fix typo in input-send-event examples

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11 18:27:02 +00:00
Fam Zheng f71eaa74c0 qmp: Add optional switch "query-nodes" in query-blockstats
This bool option will allow query all the node names. It iterates all
the BDSes that are assigned a name, also in this case don't query up the
backing chain.

Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10 10:25:29 +01:00
Amos Kong b5369dd841 qmp: fix typo in input-send-event examples
Lack of two closed bracket in json commands.

Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-12-10 11:14:44 +03:00
Gerd Hoffmann df5b2adb73 input: move input-send-event into experimental namespace
Ongoing discussions on how we are going to specify the console,
so tag the command as experiental so we can refine things in
the 2.3 development cycle.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1416923657-10614-1-git-send-email-armbru@redhat.com
[Spell out "not a stable API", and x- the QAPI schema, too]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Amos Kong <akong@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-11-25 17:03:31 +00:00
Amos Kong 51fc44768a QMP/input-send-event: make console parameter optional
The 'QemuConsole' is the input source for handler, we share some
input handlers to process the input events from different QemuConsole.

Normally we only have one set of keyboard, mouse, usbtablet, etc.
The devices have different mask, it's fine to just checking mask to
insure that the handler has the ability to process the event.

I saw we try to bind console to handler in usb/dev-hid.c, but display
always isn't available at that time.

If we have multiseat setup (as Gerd said), we only have 'problem' in
this case. Actually event from different devices have the same effect
for system, it's fine to always use the first available handler
without caring about the console.

For send-key command, we just pass a NULL for console parameter in
calling qemu_input_event_send_key(NULL, ..), but 'input-send-event'
needs to care more devices.

Conclusion:
Generally assigning the special console is meanless, and we can't
directly remove the QMP parameter for compatibility.

So we can make the parameter optional. The parameter might be useful
for some special condition: we have multiple devices without binding
console and they all have the ability(mask) to process events, and
we don't want to use the first one.

Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-11-13 11:06:40 +01:00
Marcelo Tosatti 50c6617fcb add input-send-event command
Which allows specification of absolute/relative,
up/down and console parameters.

Suggested by Gerd Hoffman.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-10-02 09:58:14 +02:00
Lluís Vilanova 1dde0f48d5 trace: [qmp] Add commands to query and control event tracing state
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-id: 20140825111957.31112.31733.stgit@fimbulvetr.bsc.es
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-26 09:34:38 +01:00
Stefan Hajnoczi 550830f935 block: delete cow block driver
This patch removes support for the cow file format.

Normally we do not break backwards compatibility but in this case there
is no impact and it is the most logical option.  Extraordinary claims
require extraordinary evidence so I will show why removing the cow block
driver is the right thing to do.

The cow file format is the disk image format for Usermode Linux, a way
of running a Linux system in userspace.  The performance of UML was
never great and it was hacky, but it enjoyed some popularity before
hardware virtualization support became mainstream.

QEMU's block/cow.c is supposed to read this image file format.
Unfortunately the file format was underspecified:

1. Earlier Linux versions used the MAXPATHLEN constant for the backing
   filename field.  The value of MAXPATHLEN can change, so Linux
   switched to a 4096 literal but QEMU has a 1024 literal.

2. Padding was not used on the header struct (both in the Linux kernel
   and in QEMU) so the struct layout varied across architectures.  In
   particular, i386 and x86_64 were different due to int64_t alignment
   differences.  Linux now uses __attribute__((packed)), QEMU does not.

Therefore:

1. QEMU cow images do not conform to the Linux cow image file format.

2. cow images cannot be shared between different host architectures.

This means QEMU cow images are useless and QEMU has not had bug reports
from users actually hitting these issues.

Let's get rid of this thing, it serves no purpose and no one will be
affected.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1410877464-20481-1-git-send-email-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-22 11:39:45 +01:00
Alexey Kardashevskiy 9cb805fd26 cpus: Define callback for QEMU "nmi" command
This introduces an NMI (Non Maskable Interrupt) interface with
a single nmi_monitor_handler() method. A machine or a device can
implement it. This searches for an QOM object with this interface
and if it is implemented, calls it. The callback implements an action
required to cause debug crash dump on in-kernel debugger invocation.
The callback returns Error**.

This adds a nmi_monitor_handle() helper which walks through
all objects to find the interface. The interface method is called
for all found instances.

This adds support for it in qmp_inject_nmi(). Since no architecture
supports it at the moment, there is no change in behaviour.

This changes inject-nmi command description for HMP and QMP.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-25 13:25:16 +02:00
Jeff Cody 13d8cc515d block: add backing-file option to block-stream
On some image chains, QEMU may not always be able to resolve the
filenames properly, when updating the backing file of an image
after a block job.

For instance, certain relative pathnames may fail, or drives may
have been specified originally by file descriptor (e.g. /dev/fd/???),
or a relative protocol pathname may have been used.

In these instances, QEMU may lack the information to be able to make
the correct choice, but the user or management layer most likely does
have that knowledge.

With this extension to the block-stream api, the user is able to change
the backing file of the active layer as part of the block-stream
operation.

This allows the change to be 'safe', in the sense that if the attempt
to write the active image metadata fails, then the block-stream
operation returns failure, without disrupting the guest.

If a backing file string is not specified in the command, the backing
file string to use is determined in the same manner as it was
previously.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-07-01 10:47:01 +02:00
Jeff Cody 54e2690090 block: extend block-commit to accept a string for the backing file
On some image chains, QEMU may not always be able to resolve the
filenames properly, when updating the backing file of an image
after a block commit.

For instance, certain relative pathnames may fail, or drives may
have been specified originally by file descriptor (e.g. /dev/fd/???),
or a relative protocol pathname may have been used.

In these instances, QEMU may lack the information to be able to make
the correct choice, but the user or management layer most likely does
have that knowledge.

With this extension to the block-commit api, the user is able to change
the backing file of the overlay image as part of the block-commit
operation.

This allows the change to be 'safe', in the sense that if the attempt
to write the overlay image metadata fails, then the block-commit
operation returns failure, without disrupting the guest.

If the commit top is the active layer, then specifying the backing
file string will be treated as an error (there is no overlay image
to modify in that case).

If a backing file string is not specified in the command, the backing
file string to use is determined in the same manner as it was
previously.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-07-01 10:47:01 +02:00
Jeff Cody fa40e65622 block: add QAPI command to allow live backing file change
This allows a user to make a live change to the backing file recorded in
an open image.

The image file to modify can be specified 2 ways:

1) image filename
2) image node-name

Note: this does not cause the backing file itself to be reopened; it
merely changes the backing filename in the image file structure, and
in internal BDS structures.

It is the responsibility of the user to pass a filename string that
can be resolved when the image chain is reopened, and the filename
string is not validated.

A good analogy for this command is that it is a live version of
'qemu-img rebase -u', with respect to changing the backing file string.

[Jeff is offline so I respun this patch in his absence.  Dropped image
filename since using node-name is preferred and this is a new command.
No need to introduce the limitations of finding images by filename.
--Stefan]

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-07-01 10:46:38 +02:00
Jeff Cody 7676e2c597 block: make 'top' argument to block-commit optional
Now that active layer block-commit is supported, the 'top' argument
no longer needs to be mandatory.

Change it to optional, with the default being the active layer in the
device chain.

[kwolf: Rebased and resolved conflict in tests/qemu-iotests/040]

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-07-01 10:15:33 +02:00
Marcelo Tosatti f2ae8abf1f mc146818rtc: add rtc-reset-reinjection QMP command
It is necessary to reset RTC interrupt reinjection backlog if
guest time is synchronized via a different mechanism, such as
QGA's guest-set-time command.

Failing to do so causes both corrections to be applied (summed),
resulting in an incorrect guest time.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-29 18:59:35 +03:00
Peter Maydell 2d40fa6987 Block patches for 2.1.0-rc0
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJTrbz4AAoJEH8JsnLIjy/WlIkP/RepIwS29f19i3B/idGzUdYW
 9XJnVowRvpkUzDqUprrr7lPHMW/CwAswLNis9B1hZ59rx+tx4Hm/rZGARlqhSOSO
 ZMdW32GFW0SyC5PglFBwGQAk4U0FxwW5cJD6US7h3L4pACIdCkzFSNxehyfCMyU/
 oJkjuAH4a2IQoQf/M7WMm5kPkrdpRp6ZgbQvJGHaR63cuulZDb7rbHMyG66MWH8P
 wahhFFPY1wOeMBiISxPbmcTus+AlfCffG5qPqq83OtaIuWzINTmWlpiFmtx+Aqwy
 HSvGnFJ4Rf7J6Fw8sdTsABdqUTc/gxDYmhAuftm/hsjD9MvPeuFSLPMPLfGg6aPR
 umKaeBOw8NoMTPgbxg403gxFTrHar+TidBu8KgZw5T189/oJSSpT2J53uHWazmd9
 8USkcYQ7VHdFUQVXluLEzHMIWc7kf87ylQ8c9S1yCkNeWYxRZDZGgHEU49ov7FFU
 FnA0w+ZFyDkU8d5gryG+vxOeBDlmXD4UHa676gGlaYhs7YC/BY/JaMgqY4Fd6MMW
 dS5ibPjdtbxEZTh29eWEByMWpzuitr+iPPzsJEdC29LeIIj3XRQq/4FyiQ6EMAAO
 iOlcqE3tws0Ty8GEp78xsAYjaLuH3zmvOTa4aHUQ+K9kwpMPFSJKEcLkwPWWYRbs
 qR2ZL6M+95oQTYkYzv8i
 =Wwqx
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block patches for 2.1.0-rc0

# gpg: Signature made Fri 27 Jun 2014 19:50:32 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"

* remotes/kevin/tags/for-upstream: (47 commits)
  iotests: Fix 083 for out-of-tree builds
  iotests: Drop Python version from 065's Shebang
  iotests: Use $PYTHON for Python scripts
  iotests: Source common.env
  configure: Enable out-of-tree iotests
  iotests: Allow out-of-tree run
  block.c: Don't return success for bdrv_append_temp_snapshot() failure
  qemu-iotests: Add TestRepairQuorum to 041 to test drive-mirror node-name mode.
  block: Add replaces argument to drive-mirror
  blockjob: Fix recent BLOCK_JOB_ERROR regression
  blockjob: Fix recent BLOCK_JOB_READY regression
  virtio-blk: Rename complete_request_early to complete_request_vring
  virtio-blk: Unify {non-,}dataplane's request handlings
  virtio-blk: Schedule BH in the right context
  virtio-blk: Export request handling functions to dataplane
  virtio-blk: Make request completion function virtual
  block: acquire AioContext in qmp_query_blockstats()
  block: make bdrv_query_stats() static
  virtio-blk: Fix and clean up the in_sg and out_sg check
  virtio-blk: Fill in VirtIOBlockReq.out in dataplane code
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-29 15:24:54 +01:00
Benoît Canet 09158f00e0 block: Add replaces argument to drive-mirror
drive-mirror will bdrv_swap the new BDS named node-name with the one
pointed by replaces when the mirroring is finished.

Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-06-27 20:00:00 +02:00
Laszlo Ersek 32a97ea171 char: report frontend open/closed state in 'query-chardev'
In addition to the on-line reporting added in the previous patch, allow
libvirt to query frontend state independently of events.

Libvirt's path to identify the guest agent channel it cares about differs
between the event added in the previous patch and the QMP response field
added here. The event identifies the frontend device, by "id". The
'query-chardev' QMP command identifies the backend device (again by "id").
The association is under libvirt's control.

RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1080376

Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-27 09:34:00 -04:00
Benoît Canet 4c828dc61a block: Add node-name argument to drive-mirror
This new argument can be used to specify the node-name of the new mirrored BDS.

Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-06-27 14:18:18 +02:00
Igor Mammedov 02419bcb3f qmp: add query-acpi-ospm-status command
... to get ACPI OSPM status reported by ACPI devices
via _OST method.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 18:44:22 +03:00
Igor Mammedov 6f2e27301d qmp: add query-memory-devices command
... allowing to get state of present memory devices.
Currently implemented only for PCDIMMDevice.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 18:44:22 +03:00
Michael S. Tsirkin c059451cc1 qmp: clean out whitespace
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 18:44:21 +03:00
Hu Tao 76b5d8507d qmp: add query-memdev
Add qmp command query-memdev to query for information
of memory devices

Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 18:44:21 +03:00
Chunyan Liu e36af94f86 qapi: output def_value_str when query command line options
Change qapi interfaces to output the newly added def_value_str when querying
command line options.

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Leandro Dorileo <l@dorileo.org>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-16 17:23:20 +08:00
Peter Maydell 178ac111bc Merge remote-tracking branch 'remotes/qmp-unstable/queue/qmp' into staging
* remotes/qmp-unstable/queue/qmp:
  qapi: zero-initialize all QMP command parameters
  scripts/qapi.py: Avoid syntax not supported by Python 2.4
  doc: add "setup" to list of migration states

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-05-22 19:04:49 +01:00
Peter Feiner 3b69595068 doc: add "setup" to list of migration states
On a slow VM (e.g., nested), you see the "setup" state when you query the
migration status.

Signed-off-by: Peter Feiner <peter@gridcentric.ca>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-20 14:39:19 -04:00
Peter Lieven 465bee1da8 block: optimize zero writes with bdrv_write_zeroes
this patch tries to optimize zero write requests
by automatically using bdrv_write_zeroes if it is
supported by the format.

This significantly speeds up file system initialization and
should speed zero write test used to test backend storage
performance.

I ran the following 2 tests on my internal SSD with a
50G QCOW2 container and on an attached iSCSI storage.

a) mkfs.ext4 -E lazy_itable_init=0,lazy_journal_init=0 /dev/vdX

QCOW2         [off]     [on]     [unmap]
-----
runtime:       14secs    1.1secs  1.1secs
filesize:      937M      18M      18M

iSCSI         [off]     [on]     [unmap]
----
runtime:       9.3s      0.9s     0.9s

b) dd if=/dev/zero of=/dev/vdX bs=1M oflag=direct

QCOW2         [off]     [on]     [unmap]
-----
runtime:       246secs   18secs   18secs
filesize:      51G       192K     192K
throughput:    203M/s    2.3G/s   2.3G/s

iSCSI*        [off]     [on]     [unmap]
----
runtime:       8mins     45secs   33secs
throughput:    106M/s    1.2G/s   1.6G/s
allocated:     100%      100%     0%

* The storage was connected via an 1Gbit interface.
  It seems to internally handle writing zeroes
  via WRITESAME16 very fast.

Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-05-19 13:42:27 +02:00
Eric Blake cd0c5389dd qmp: use valid JSON in transaction example
Our example should use the correct quotes to match what someone
could actually pass over the wire.

* qmp-commands.hx: Use correct JSON quotes.

Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-09 09:11:32 -04:00
ChenLiang 8bc3923343 migration: expose xbzrle cache miss rate
expose xbzrle cache miss rate

Signed-off-by: ChenLiang <chenliang88@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2014-05-05 22:15:03 +02:00
ChenLiang 58570ed894 migration: expose the bitmap_sync_count to the end
expose the count that logs the times of updating the dirty bitmap to
end user.

Signed-off-by: ChenLiang <chenliang88@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2014-05-05 22:15:03 +02:00
Amos Kong f7bc8ef809 virtio-net: add vlan receive state to RxFilterInfo
Stefan Fritsch just fixed a virtio-net driver bug [1], virtio-net won't
filter out VLAN-tagged packets if VIRTIO_NET_F_CTRL_VLAN isn't negotiated.

This patch added a new field to @RxFilterInfo to indicate vlan receive
state ('normal', 'none', 'all'). If VIRTIO_NET_F_CTRL_VLAN isn't
negotiated, vlan receive state will be 'all', then all VLAN-tagged packets
will be received by guest.

This patch also fixed a boundary issue in visiting vlan table.

[1] http://lists.nongnu.org/archive/html/qemu-devel/2014-02/msg02604.html

Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2014-03-26 12:49:10 +02:00
Stefan Hajnoczi dc3dd0d2be qmp: add query-iothreads command
The "query-iothreads" command returns a list of information about
iothreads.  See the patch for API documentation.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-03-13 14:42:24 +01:00