If it returns an error, the migrated VM will not be started, but qemu
exits with an error message.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
nbd_receive_reply() is called by the event loop whenever data is
available or the socket has been closed by the remote side.
This patch closes the socket when an error occurs to prevent the
nbd_receive_reply() handler from being called indefinitely after the
connection has failed.
Note that we were already correctly returning EIO for pending requests
but leaving the nbd_receive_reply() handler registered resulted in high
CPU consumption and a flood of error messages.
Reuse nbd_teardown_connection() to close the socket.
Reported-by: Zhifeng Cai <bluewindow@h3c.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
On 32-bit hosts, some compilers will warn on too large integer constants
for constants that are 64-bit in length. Explicitly put a 'ULL' suffix
on those defines.
Reported-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The "host_device" protocol driver should strip the "host_device:" prefix
from filenames if present.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The hdev_create() implementation in block/raw-posix.c is used by the
"host_device", "host_cdrom" and "host_floppy" protocol block drivers
together. Thus, any of the associated prefixes may occur and exactly one
should should be stripped, if it does (thus,
"host_device:host_cdrom:/dev/cdrom" is not shortened to "/dev/cdrom").
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The "host_cdrom" protocol drivers should strip the "host_cdrom:" prefix
from filenames if present.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The "host_floppy" protocol driver should strip the "host_floppy:" prefix
from filenames if present.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The "host_device" protocol driver should strip the "host_device:" prefix
from filenames if present.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
qcow2_open() causes writes when repairing an image with the dirty flag
set and when clearing autoclear flags. It shouldn't do this when another
qemu instance is still actively working on this image file.
One effect of the bug is that images may have a cleared dirty flag while
the migration source host still has it in use with lazy refcounts
enabled, so refcounts are not accurate and the dirty flag must remain
set.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Instead of manually building a list of all options from BDRVQcowState
values just reuse the options that were used to open the image.
qcow2_open() won't fully use all of the options in the QDict, but that's
okay.
This fixes all of the driver-specific options in qcow2, except for
lazy-refcounts, which was special cased before.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch keep the recursive way of doing things but simplify it by giving
two responsabilities to all block filters implementors.
They will need to do two things:
-Set the is_filter field of their block driver to true.
-Implement the bdrv_recurse_is_first_non_filter method of their block driver like
it is done on the Quorum block driver. (block/quorum.c)
[Paolo Bonzini <pbonzini@redhat.com> pointed out that this patch changes
the semantics of blkverify, which now recurses down both bs->file and
s->test_file.
-- Stefan]
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Before dereferencing bs->drv for a call to its member bdrv_co_readv(),
copy_sectors() should check whether that pointer is indeed valid, since
it may have been set to NULL by e.g. a concurrent write triggering the
corruption prevention mechanism.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
After migration has completed, we call bdrv_invalidate_cache() so that
drivers which cache some data drop their stale copy of the data and
reread it from the image file to get a new version of data that the
source modified while the migration was running.
Reloading metadata from the image file is useless, though, if the size
of the image file stays stale (this is a value that is cached for all
image formats in block.c). Reads from (meta)data after the old EOF
return only zeroes, causing image corruption.
We need to update bs->total_sectors in all layers that could potentially
have changed their size (i.e. backing files are not a concern - if they
are changed, we're in bigger trouble)
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When reading the refcount table entry in get_refcount(), only bits which
are actually significant for the refcount block offset should be taken
into account.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The bdrv_create() implementation of the block/raw-win32 "file" protocol
driver should strip the "file:" prefix from filenames if present.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The "file" protocol driver should strip the "file:" prefix from
filenames if present.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The bdrv_create() implementation of the block/raw-posix "file" protocol
driver should strip the "file:" prefix from filenames if present.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The "file" protocol driver should strip the "file:" prefix from
filenames if present.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Originally, this built up the error message with the backing filename,
so that errp was set as follows:
error_set(errp, QERR_OPEN_FILE_FAILED, backing_filename);
However, we now propagate the local_error from the
bdrv_open_backing_file() call instead, making these 2 lines useless
code.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The current iscsi block driver code makes the rather arbitrary decision
that TYPE_MEDIUM_CHANGER and TYPE_TAPE devices have bs->sg = 1 and all
other device types are disks.
Instead of this, check for TYPE_DISK to expose the disk interface and
make everything else bs->sg = 1. In particular, this includes devices
with TYPE_STORAGE_ARRAY, which is what LUN 0 of an iscsi target is.
(See https://bugzilla.redhat.com/show_bug.cgi?id=1067784 for the exact
scenario.)
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the definitions of GLUSTER_FD_WRITE and GLUSTER_FD_READ which are
no longer used. Also sockets.h isn't needed any more.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Pipe handling mechanism in gluster driver was based on similar implementation
in RBD driver and hence had GPLv2 and associated copyright information.
After changing gluster driver to coroutine based implementation, the pipe
handling code no longer exists and hence change gluster driver's licence to
GPLv2+ and remove RBD copyrights.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit adccfbcd60 (block: gluster - add
reopen support.) did not supply the qemu_gluster_init() Error **
argument, needed since commit a7451cb850
(gluster: correctly propagate errors).
Pass through qemu_gluster_reopen_prepare()'s errp, as done in
qemu_gluster_open().
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTENUMAAoJEJykq7OBq3PIXoQH/R7Q9CqASrBEfbT1GJDSr3E5
yq0ZZ4nJBhhn0f8tOw9NWGCmTH1UZn0u4PbYEj4jTGJyWY2POkCKLPRvurge4c+Q
L+OwzspW14O35o7WuBC8uWvSxh8ExaiwwrutCsIsz68UAcnoiwyTMSKghIy9+Osk
lJKRFz6IFbgxCocqeNQrilj84vYSv9VzXZY8/nIhDMFsbjaKW7sKwu4jnXB7+v5J
cA0+voafINNICNMeXzkqBbKwWIFtYOkPe287MZQNbpS2vCS2bsZeivDxsBJ26Cmx
Xho8Xz5utvBMBrNtidHCTsd2jrj0VBdGgksYoHPyIwK/gBr1EVTGKpebraKXBEU=
=rgw9
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
Block pull request
# gpg: Signature made Fri 28 Feb 2014 18:27:24 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/block-pull-request:
block/vmdk: do not report file offset for compressed extents
discard rbd error output when not relevant in qemu-iotests
block: use /var/tmp instead of /tmp for -snapshot
qemu-io-test: Disable Quorum test when not compiled in.
qmp: Make Quorum error events more palatable.
qmp: Fix BlockdevOptionQuorum.
block: gluster - add reopen support.
block: gluster - code movements, state storage changes
qemu-iotests: add more tests to the "quick" group
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/bonzini/scsi-next:
block/iscsi: fix segfault if writesame fails
scsi-disk: Add support for port WWN and index descriptors in VPD page 83h
block/iscsi: query for supported VPD pages
block/iscsi: fix deadlock on scsi check condition
scsi-bus: Fix transfer length for VERIFY with BYTCHK=11b
scsi: report thin provisioning errors with werror=report
scsi: Change scsi sense buf size to 252
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Insert quorum QMP events documentation alphabetically.
Also change the "ret" errno value by an optional "error" being an strerror(-ret)
in the QUORUM_REPORT_BAD qmp event.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Gluster does parse open flags in its .bdrv_open() implementation,
and the .bdrv_reopen_* implementations need to do the same.
A new gluster connection to the image file to be created is established
in the .bdrv_reopen_prepare(), and the image file opened with the new
flags.
If this is successful, then the old image file is closed, and the
old connection torn down. The relevant structure pointers in the gluster
state structure are updated to the new connection.
If it is not successful, then the new file handle and connection is
abandoned (if it exists), while the old connection is not modified at
all.
With reopen supported, block-commit (and offline commit) is now also
supported for image files whose base image uses the native gluster
protocol driver.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In preparation for supporting reopen on gluster, move flag
parsing out to a function. Also, add a NULL check in the
gconf cleanup.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ZaDG
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block patches
# gpg: Signature made Fri 21 Feb 2014 21:42:24 GMT using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (54 commits)
iotests: Mixed quorum child device specifications
quorum: Simplify quorum_open()
quorum: Add unit test.
quorum: Add quorum_open() and quorum_close().
quorum: Implement recursive .bdrv_recurse_is_first_non_filter in quorum.
quorum: Add quorum_co_flush().
quorum: Add quorum_invalidate_cache().
quorum: Add quorum_getlength().
quorum: Add quorum mechanism.
quorum: Add quorum_aio_readv.
blkverify: Extract qemu_iovec_clone() and qemu_iovec_compare() from blkverify.
quorum: Add quorum_aio_writev and its dependencies.
quorum: Create BDRVQuorumState and BlkDriver and do init.
quorum: Create quorum.c, add QuorumChildRequest and QuorumAIOCB.
check-qdict: Test termination of qdict_array_split()
check-qdict: Adjust test for qdict_array_split()
qdict: Extract non-QDicts in qdict_array_split()
qemu-config: Sections must consist of keys
qemu-iotests: Check qemu-img command line parsing
qemu-img: Allow -o help with incomplete argument list
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/bonzini/configure:
build: softmmu targets do not have a "main.o" file
configure: Disable libtool if -fPIE does not work with it (bug #1257099)
block: convert block drivers linked with libs to modules
Makefile: introduce common-obj-m and block-obj-m for DSO
Makefile: install modules with "make install"
module: implement module loading
rules.mak: introduce DSO rules
darwin: do not use -mdynamic-no-pic
block: use per-object cflags and libs
rules.mak: allow per object cflags and libs
rules.mak: fix $(obj) to a real relative path
util: Split out exec_dir from os_find_datadir
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
commit fa6252b0 introduced a segfault because it tries
to read iTask.task->sense after iTask.task has been
freed.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
this patch ensures that we only query for block provisioning and
block limits vpd pages if they are advertised. It also cleans
up the inquiry code and eliminates some redundant code.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
the retry logic was broken because the complete status
of the task structure was not reset. this resulted in
an infinite loop retrying the command over and over.
CC: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Although it may not look like it, this patch simplifies quorum_open().
qdict_array_split() is now able to return QLists with different objects
than only QDicts, therefore it will now do all the work and
quorum_open() does not have to handle reference strings by itself.
This allows mixing full option dicts and reference strings for
specifying the child block devices of quorum; furthermore, it improves
handling of malformed specifications.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Example of command line:
-drive if=virtio,driver=quorum,\
children.0.file.filename=1.raw,\
children.0.node-name=1.raw,\
children.0.driver=raw,\
children.1.file.filename=2.raw,\
children.1.node-name=2.raw,\
children.1.driver=raw,\
children.2.file.filename=3.raw,\
children.2.node-name=3.raw,\
children.2.driver=raw,\
vote-threshold=2
blkverify=on with vote-threshold=2 and two files can be passed to
emulate blkverify.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is used to activate quorum snapshot.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Makes a vote to select error if any.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We really want that live migration works with quorum so implement
quorum_invalidate_cache().
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Check that every bs file returns the same length.
Otherwise, return -EIO to disable the quorum and
avoid length discrepancy.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patchset enables the core of the quorum mechanism.
The num_children reads are compared to get the majority version and if this
version exists more than threshold times the guest won't see the error at all.
If a block is corrupted or if an error occurs during an IO or if the quorum
cannot be established QMP events are used to report to the management.
Use gnutls's SHA-256 to compare versions.
--enable-quorum must be used to enable the feature.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add code to do num_children reads in parallel and cleanup the structures
afterwards.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu_iovec_compare() will be used to compare IOs vectors in quorum blkverify
mode. The patch extracts these functions in order to factorize the code.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Writes are mirrored num_children times on num_children devices.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Create the structure holding the quorum settings and write the minimal block
driver instanciation boilerplate.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Quorum is a block filter mirroring writes to num_children children.
For reads quorum reads each children and does a vote.
If more than vote_threshold versions are identical the quorum is reached and
this winning version is returned to the guest. So quorum prevents bit corruption.
For high availability purpose minority errors are reported via QMP but the guest
does not see them.
This patch creates the driver C source file and introduces the structures that
will be used in asynchronous reads and writes.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of just putting it in debugging output, we can now put the
value in an Error.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Returning "Wrong medium type" for an image that does not have a valid
header is a bit weird. Improve the error by mentioning what format
was trying to open it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that we can return the "right" errors, use the Error** parameter
to pass them back instead of just printing them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This prepares for propagating errors from vmdk_open_sparse and
vmdk_open_desc_file up to the caller of vmdk_open.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently, we just try reading a VMDK file as both image and descriptor.
This makes it hard to choose which of the two attempts gave the best error.
We'll decide in advance if the file looks like an image or a descriptor,
and this patch is the first step to that end.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Before:
$ ./qemu-io-old
qemu-io-old> open -r -o driver=vvfat,fat-type=24,dir=i386-softmmu
Valid FAT types are only 12, 16 and 32
qemu-io-old: can't open device (null): Could not open image: Invalid argument
After:
$ ./qemu-io
qemu-io> open -r -o driver=vvfat,fat-type=24,dir=i386-softmmu
qemu-io: can't open device (null): Valid FAT types are only 12, 16 and 32
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently, "gluster:///volname/img" and (using file. options)
"file.driver=gluster,file.filename=foo" will segfault. Also,
"//host/volname/img" will be rejected, but it is a valid URL
that should be accepted just fine with "file.driver=gluster".
Accept all of these, by inferring missing transport and host
as TCP and localhost respectively.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Before:
$ ./qemu-io-old
qemu-io-old> open -r -o file.driver=iscsi,file.filename=foo
Failed to parse URL : foo
qemu-io-old: can't open device (null): Could not open 'foo': Invalid argument
After:
$ ./qemu-io
qemu-io> open -r -o file.driver=iscsi,file.filename=foo
qemu-io: can't open device (null): Failed to parse URL : foo
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Before:
$ ./qemu-io-old
qemu-io-old> open -r -o file.driver=nbd
one of path and host must be specified.
qemu-io-old: can't open device (null): Could not open image: Invalid argument
$ ./qemu-io-old
qemu-io-old> open -r -o file.driver=nbd,file.host=foo,file.path=bar
path and host may not be used at the same time.
qemu-io-old: can't open device (null): Could not open image: Invalid argument
After:
$ ./qemu-io
qemu-io> open -r -o file.driver=nbd
qemu-io: can't open device (null): one of path and host must be specified.
$ ./qemu-io
qemu-io> open -r -o file.driver=nbd,file.host=foo,file.path=bar
qemu-io: can't open device (null): path and host may not be used at the same time.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Before:
$ qemu-io-old
qemu-io-old> open -r -o file.driver=nbd
qemu-io-old: can't open device (null): Could not open image: Invalid argument
$ ./qemu-io-old
qemu-io-old> open -r -o file.driver=nbd,file.host=foo,file.path=bar
path and host may not be used at the same time.
qemu-io-old: can't open device (null): Could not open image: Invalid argument
After:
$ ./qemu-io
qemu-io> open -r -o file.driver=nbd
one of path and host must be specified.
qemu-io: can't open device (null): Could not open image: Invalid argument
$ ./qemu-io
qemu-io> open -r -o file.driver=nbd,file.host=foo,file.path=bar
path and host may not be used at the same time.
qemu-io: can't open device (null): Could not open image: Invalid argument
Next patch will fix the error propagation.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This option is now unnecessary since specifying BDRV_O_PROTOCOL as flag
will do exactly the same.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add the bdrv_open() option BDRV_O_PROTOCOL which results in passing the
call to bdrv_file_open(). Additionally, make bdrv_file_open() static and
therefore bdrv_open() the only way to call it.
Consequently, all existing calls to bdrv_file_open() have to be adjusted
to use bdrv_open() with the BDRV_O_PROTOCOL flag instead.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Allow bdrv_open() to handle references to existing block devices just as
bdrv_file_open() is already capable of.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make bdrv_open() take a pointer to a BDS pointer, similarly to
bdrv_file_open(). If a pointer to a NULL pointer is given, bdrv_open()
will create a new BDS with an empty name; if the BDS pointer is not
NULL, that existing BDS will be reused (in the same way as bdrv_open()
already did).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of making the backing file contents visible again after a discard
request, set the zero flag if possible (i.e. on version >= 3).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
No longer adds flags and libs for them to global variables, instead
create config-host.mak variables like FOO_CFLAGS and FOO_LIBS, which is
used as per object cflags and libs.
This removes unwanted dependencies from libcacard.
Signed-off-by: Fam Zheng <famz@redhat.com>
[Split from Fam's patch to enable modules. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
error_is_set(&var) is the same as var != NULL, but it takes
whole-program analysis to figure that out. Unnecessarily hard for
optimizers, static checkers, and human readers. Dumb it down to
obvious.
Gets rid of several dozen Coverity false positives.
Note that the obvious form is already used in many places.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
When starting a block job, commit_active_start() relies on whether *errp
is set by mirror_start_job. This allows it to determine if the mirror
job start failed, so that it can clean up any changes to open flags from
the bdrv_reopen(). If errp is NULL, then it will not be able to
determine if mirror_start_job failed or not.
To avoid this, use a local Error variable, and then propagate the error
(if any) to errp.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
There are a handful of places in the block layer where a failure path
has a valid -errno value, yet error_setg() is used. Those instances
should instead use error_setg_errno(), to preserve as much error
information as possible.
This patch replaces those instances with error_setg_errno(), so that
errno is passed up the stack in the error message.
Reported-By: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
iSCSI currently does not need to do any actions to support the
current usage of bdrv_reopen(). However, it is important to note
a couple of things: 1.) A connection will not be re-established to
an iSCSI target, and 2.) If iscsi_open() is changed to parse 'flags',
then iscsi_reopen_prepare() may need to be more than a stub.
In light of the above, this commit adds comments above both of the
functions to bring attention to these facts.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
raw copies over the BlockLimits of bs->file during bdrv_open().
However, since commit d34682cd it is immediately overwritten during
bdrv_refresh_limits(). This caused all fields except for
opt_transfer_length and opt_mem_alignment (which happen to be correctly
inherited in generic code) to be zeroed.
Move the BlockLimit assignment to a .bdrv_refresh_limits() callback to
make it work again for all fields.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
In the case of a metadata preallocation with a large cluster size,
qcow2_alloc_cluster_offset() can allocate nothing and returns a
NULL l2meta. This patch checks for it and link2 l2 with only valid
l2meta.
Replace 9 and 512 with BDRV_SECTOR_BITS, BDRV_SECTOR_SIZE
respectively while at the function.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When cluster size is big enough it can lead to an offset overflow
in qcow2_alloc_clusters_at(). This patch fixes it.
The allocation is stopped each time at L2 table boundary
(see handle_alloc()), so the possible maximum bytes could be
2^(cluster_bits - 3 + cluster_bits)
cluster_bits - 3 is used to compute the number of entry by L2
and the additional cluster_bits is to take into account each
clusters referenced by the L2 entries.
so int is safe for cluster_bits<=17, unsafe otherwise.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
n_start can be actually calculated from offset. The number of
sectors to be allocated(n_end - n_start) can be passed in in
num. By removing n_start and n_end, we can save two parameters.
The side effect is there is a bug in qcow2.c:preallocate() that
passes incorrect n_start to qcow2_alloc_cluster_offset() is
fixed. The bug can be triggerred by a larger cluster size than
the default value(65536), for example:
./qemu-img create -f qcow2 \
-o 'cluster_size=131072,preallocation=metadata' file.img 4G
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
the opt_transfer_length has nothing to do with logical
block provisioning stuff so always copy it from
the block limits VPD page.
Reported-By: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds native support for accessing images on NFS
shares without the requirement to actually mount the entire
NFS share on the host.
NFS Images can simply be specified by an url of the form:
nfs://<host>/<export>/<filename>[?param=value[¶m2=value2[&...]]]
For example:
qemu-img create -f qcow2 nfs://10.0.0.1/qemu-images/test.qcow2
You need LibNFS from Ronnie Sahlberg available at:
git://github.com/sahlberg/libnfs.git
for this to work.
During configure it is automatically probed for libnfs and support
is enabled on-the-fly. You can forbid or enforce libnfs support
with --disable-libnfs or --enable-libnfs respectively.
Due to NFS restrictions you might need to execute your binaries
as root, allow them to open priviledged ports (<1024) or specify
insecure option on the NFS server.
For additional information on ROOT vs. non-ROOT operation and URL
format + parameters see:
https://raw.github.com/sahlberg/libnfs/master/README
Supported by qemu are the uid, gid and tcp-syncnt URL parameters.
LibNFS currently support NFS version 3 only.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Errors are inadvertently ignored in a few places. Has always been
broken. Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
this adds a basic vmdk corruption check. it should detect severe
table corruptions and file truncation.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The QCOW2 .bdrv_make_empty implementation always returns 0 for success,
but does not actually do anything.
The proper way to not support an optional driver function stub is to
just not implement it, so let's remove the stub.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The QED .bdrv_make_empty() implementation does nothing but return
-ENOTSUP, which causes problems in bdrv_commit(). Since the function
stub exists for QED, it is called, which then always returns an error.
The proper way to not support an optional driver function stub is to
just not implement it, so let's remove the stub.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* bonzini/scsi-next:
scsi: Support TEST UNIT READY in the dummy LUN0
block: add .bdrv_reopen_prepare() stub for iscsi
virtio-scsi: Prevent assertion on missed events
virtio-scsi: Cleanup of I/Os that never started
scsi: Assign cancel_io vector for scsi_disk_emulate_ops
Conflicts:
block/iscsi.c
aliguori: resolve trivial merge conflict in block/iscsi.c
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
The new 'align' option of blkdebug can be used in order to emulate
backends with a required 4k alignment on hosts which only really require
512 byte alignment.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The iSCSI backend already gets the block size from the READ CAPACITY
command it sends. Save it so that the generic block layer gets it
too.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Add a bs->request_alignment field that contains the required
offset/length alignment for I/O requests and fill it in the raw block
drivers. Use ioctls if possible, else see what alignment it takes for
O_DIRECT to succeed.
While at it, also expose the memory alignment requirements, which may be
(and in practice are) different from the disk alignment requirements.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
When reopening with different flags, or when backing files disappear
from the chain, the limits may change. Make sure they get updated in
these cases.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoît Canet <benoit@irqsave.net>
This function separates filling the BlockLimits from bdrv_open(), which
allows it to call it from other operations which may change the limits
(e.g. modifications to the backing file chain or bdrv_reopen)
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
If the top image to commit is the active layer, and also larger than
the base image, then an I/O error will likely be returned during
block-commit.
For instance, if we have a base image with a virtual size 10G, and a
active layer image of size 20G, then committing the snapshot via
'block-commit' will likely fail.
This will automatically attempt to resize the base image, if the
active layer image to be committed is larger.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
libcurl versions 7.16.0 and later have a timer callback interface which
must be implemented in order for libcurl to make forward progress (it
will sometimes rely on being called back on the timeout if there are
no file descriptors registered). Implement the callback, and use a
QEMU AIO timer to ensure we prod libcurl again when it asks us to.
Based on Peter's original patch plus my fix to add curl_multi_timeout_do.
Should compile just fine even on older versions of libcurl.
I also tried copy-on-read and streaming:
$ ./qemu-img create -f qcow2 -o \
backing_file=http://download.fedoraproject.org/pub/fedora/linux/releases/20/Live/x86_64/Fedora-Live-Desktop-x86_64-20-1.iso \
foo.qcow2 1G
$ x86_64-softmmu/qemu-system-x86_64 \
-drive if=none,file=foo.qcow2,copy-on-read=on,id=cd \
-device ide-cd,drive=cd --enable-kvm -m 1024
Direct http usage is probably too slow, but with copy-on-read ultimately
the image does boot!
After some time, streaming gets canceled by an EIO, which needs further
investigation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently there is no way to query BlockStats of the backing chain. This
adds "backing" field into BlockStats to make it possible.
The comment of "parent" is reworded.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In the function mirror_iteration() -> qemu_iovec_init(),
it allocates memory for op->qiov.iov, when the write request calls back,
but in the function mirror_iteration_done(), it only frees the op,
not free the op->qiov.iov, so this causes memory leak.
It should use qemu_iovec_destroy() to free op->qiov.
Signed-off-by: Zhang Min <rudy.zhangmin@huawei.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It was muted in the previous commit 4bc74be9. Let's revive it since nothing
prevents us to do it.
With this patch, following command will work as other formats:
$ qemu-img map sheepdog:image
Cc: qemu-devel@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Liu Yuan <namei.unix@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Accoring to qcow spec, the offset fields in l1e, l2e and ref table entry
start at bit 9. The offset is cluster offset, and the smallest possible
cluster size is 512 bytes.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the filename is not prefixed by "blkverify:" in
blkverify_parse_filename(), the blkverify driver was not selected
through that protocol prefix, but by an explicit command line (or QMP)
option (like driver=blkverify).
If blkverify_parse_filename() has been called, a filename has been
given. If it is not prefixed, it is probably really just a plain
filename. This is no problem, since we can use it as the test image
filename and rely on the user to specify the raw image filename through
the new corresponding option.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduce the "test" and "raw" options for specifying images.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduce the "image" option as an alternative to specifying the image
through the filename.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Allow specifying a reference to an existing block device (by name) for
bdrv_file_open() instead of a filename and/or options.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use qemu_config_parse_qdict() to parse the command-line options in
addition to the config file.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Move the check whether there actually is a config file into the
read_config() function.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the filename is not prefixed by "blkdebug:" in
blkdebug_parse_filename(), the blkdebug driver was not selected through
that protocol prefix, but by an explicit command line option
(file.driver=blkdebug or something similar). Contrary to the current
reaction, this is not a problem at all; we just need to store the
filename (in the x-image option) and can go on; the user just has to
manually specify the config option.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use an Error variable in the read_config() function.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Local variable "n" as int64_t avoids overflow with large sector number
calculation. See test case change for failure case.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We should pass base_inode->vdi_id to base_vdi_id of SheepdogVdiReq so that sheep
can create a clone instead a fresh volume.
This fixes following command:
qemu-create -b sheepdog:base sheepdog:clone
so users can boot sheepdog:clone as a normal volume.
Cc: qemu-devel@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Liu Yuan <namei.unix@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
GlusterFS supports creation of zero-filled file on GlusterFS volume
by means of an API called glfs_zerofill(). Use this API from QEMU to
create an image that is filled with zeroes by using the preallocation
option of qemu-img.
qemu-img create gluster://server/volume/image -o preallocation=full 10G
The allowed values for preallocation are 'full' and 'off'. By default
preallocation is off and image is not zero-filled.
glfs_zerofill() offloads the writing of zeroes to the server and if
the storage supports SCSI WRITESAME, GlusterFS server can issue
BLKZEROOUT ioctl to achieve the zeroing.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Support .bdrv_co_write_zeroes() from gluster driver by using GlusterFS API
glfs_zerofill() that off-loads the writing of zeroes to GlusterFS server.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Convert the read, write, flush and discard implementations from aio-based
ones to coroutine based ones.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
if an async libiscsi call fails directly it can only be due
to an out of memory condition. All other errors are returned
through the callback.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
rbd callbacks are called from non-QEMU threads. Up until now a pipe was
used to signal completion back to the QEMU iothread.
The pipe writer code handles EAGAIN using select(2). The select(2) API
is not scalable since fd_set size is static. FD_SET() can write beyond
the end of fd_set if the file descriptor number is too high. (QEMU's
main loop uses poll(2) to avoid this issue with select(2).)
Since the pipe itself is quite clumsy to use and QEMUBH is now
thread-safe, just schedule a BH from the rbd callback function. This
way we can simplify I/O completion in addition to eliminating the
potential FD_SET() crash when file descriptor numbers become too high.
Crash scenario: QEMU already has 1024 file descriptors open. Hotplug an
rbd drive and get the pipe writer to take the select(2) code path.
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Tested-by: Josh Durgin <josh.durgin@inktank.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
To suppport reopen(), the .bdrv_reopen_prepare() stub must exist.
iSCSI does not have anything that needs to be done to support reopen,
so we can just implement the _prepare() stub.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* bonzini/scsi-next:
scsi-disk: add UNMAP limits to block limits VPD page
block/iscsi: use a bh to schedule co reentrance
Message-id: 1387720926-11421-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
This is a boiler-plate _nofail variant of qemu_opts_create. Remove and
use error_abort in call sites.
null/0 arguments needs to be added for the id and fail_if_exists fields
in affected callsites due to argument inconsistency between the normal and
no_fail variants.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
We support top == active for commit now, remove the check and add an
assertion here.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If active is top, it will be mirrored to base, (with block/mirror.c
code), then the image is switched when user completes the block job.
QMP documentation is updated.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
commit_active_start is implemented in block/mirror.c, It will create a
job with "commit" type and designated base in block-commit command. This
will be used for committing active layer of device.
Sync mode is removed from MirrorBlockJob because there's no proper type
for commit. The used information is is_none_mode.
The common part of mirror_start and commit_active_start is moved to
mirror_start_job().
Fix the comment wording for commit_start.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This allows setting the base before entering mirror_run, commit will
make use of it.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Let reference count manage target and don't call bdrv_close here.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This improves vmdk_create to use bdrv_* functions to replace qemu_open
and other fd functions. The error handling are improved as well. One
difference is that bdrv_pwrite will round up buffer to sectors, so for
description file, an extra bdrv_truncate is used in the end to drop
inding zeros.
Notes:
- A bonus bug fix is correct endian is used in initializing GD entries.
- ROUND_UP and DIV_ROUND_UP are used where possible.
I tested that new code produces exactly the same file as previously.
Signed-off-by: Fam Zheng <famz@redhat.com>
Tested-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
VMFS extent line in description file should be with 4 fields:
RW <size> VMFS "file-name.vmdk"
Check the number explicitly and report error if offset is appended as
FLAT, which should be invalid format.
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If there is a dirty log file to be replayed in a VHDX image, it is
replayed in .vhdx_open(). However, if the file is opened read-only,
then a somewhat cryptic error message results.
This adds a more helpful error message for the user. If an image file
contains a log to be replayed, and is opened read-only, the user is
instructed to run 'qemu-img check -r all' on the image file.
Running qemu-img check -r all will cause the image file to be opened
r/w, which will replay the log file. If a log file replay is detected,
this is flagged, and bdrv_check will increase the corruptions_fixed
count for the image.
[Fixed typo in error message that was pointed out by Eric Blake
<eblake@redhat.com>.
--Stefan]
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Function iscsi_read10_task got additional parameters starting with version
libiscsi 1.5.0.
libiscsi 1.4.0 is still widely used (Debian wheezy, jessie and other Linux
distributions currently provide packages for QEMU which use it), so we
still need support for this older API.
Reviewed-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When running qcow2 over sheepdog, we might meet following problem
qemu-system-x86_64: shrinking is not supported
And cause IO errors to Guest. This is because we abuse bs->total_sectors, which
is manipulated by generic block layer and race with sheepdog code.
We should directly check if offset > vdi_size to dynamically enlarge the volume
instead of 'offset > bs->total_sectors', which will cause problem when following
case happens:
vdi_size > offset > bs->total_sectors
# then trigger sd_truncate() to shrink the volume wrongly.
Cc: qemu-devel@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Reported-by: Hadrien KOHL <hadrien.kohl@gmail.com>
Signed-off-by: Liu Yuan <namei.unix@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
nbd patches in preparation of spice-nbd.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=J7aY
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'spice/tags/pull-spice-1' into staging
Collection of little cleanups anf bugfixes.
nbd patches in preparation of spice-nbd.
# gpg: Signature made Mon 16 Dec 2013 01:27:45 AM PST using RSA key ID D3E87138
# gpg: Can't check signature: public key not found
# By Marc-André Lureau (12) and Gerd Hoffmann (4)
# Via Gerd Hoffmann
* spice/tags/pull-spice-1:
spice: stop server for qxl hard reset
spice: move spice_server_vm_{start,stop} calls into qemu_spice_display_*()
spice: move qemu_spice_display_*() from spice-graphics to spice-core
nbd: avoid uninitialized warnings
nbd: finish any pending coroutine
nbd: make nbd_client_session_close() idempotent
nbd: pass export name as init argument
nbd: don't change socket block during negotiate
Split nbd block client code
spice-char: implement chardev port event
char: add qemu_chr_fe_event()
include: add missing config-host.h include
qmp_change_blockdev() remove unused has_format
spice-char: remove unused field
vscclient: do not add a socket watch if there is not data to send
spice: flip streaming video mode to off by default
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)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=XYe2
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'kwolf/tags/for-anthony' into staging
Block patches
# gpg: Signature made Fri 13 Dec 2013 09:47:03 AM PST using RSA key ID C88F2FD6
# gpg: Can't check signature: public key not found
# By Peter Lieven (2) and others
# Via Kevin Wolf
* kwolf/tags/for-anthony:
blkdebug: Use QLIST_FOREACH_SAFE to resume IO
qemu-img: make progress output more accurate during convert
block: expect get_block_status errors in bdrv_make_zero
block/vvfat: Fix compiler warnings for OpenBSD
qapi-schema.json: Change 1.8 reference to 2.0
sheepdog: check if '-o redundancy' is passed from user
Message-id: 1386956943-19474-1-git-send-email-kwolf@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
this fixes a potential segfault and performance regression.
If the coroutine is reentered directly in the iscsi_co_generic_cb
iscsi_process_{read,write} are interrupted and reentered any
time later. One the one hand this could happen after an iscsi_close
where the iscsi context is already gone (segfault). On the
other hand this limits the number of processed callbacks
in each aio_dispatch to one (potential performance regression).
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make sure all pending coroutines are finished when closing the session.
Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There is no need to keep the export name around, and it seems a better
fit as an argument in the init() call.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The caller might handle non-blocking using coroutine. Leave the choice
to the caller to use a blocking or non-blocking negotiate.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Qemu-iotest 030 was broken.
When the coroutine runs and finishes, it will remove itself from the req
list, so let's use safe version of foreach to avoid use after free.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The buildbot shows these compiler warnings:
block/vvfat.c: In function 'create_short_and_long_name':
block/vvfat.c:620: warning: array size (8) smaller than bound length (11)
block/vvfat.c:620: warning: array size (8) smaller than bound length (11)
block/vvfat.c:635: warning: array size (8) smaller than bound length (11)
block/vvfat.c:635: warning: array size (8) smaller than bound length (11)
They are caused by tricky code where 8 characters for the name are followed
by 3 characters for the extension, and some operations touch both name and
extension.
Using an 11 character name which includes the extension fixes the compiler
warning, satisfies cppcheck, valgrind and maybe other static and dynamic
code checkers, and even simplifies some parts of the code.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This fix a segfault (that is caused by b3af018f3) of following command:
$ qemu-img convert some_img sheepdog:some_img
Cc: qemu-devel@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Liu Yuan <namei.unix@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
this converts read, write and flush functions from aio to coroutines
eliminating almost 200 lines of code.
The requirement for libiscsi is bumped to version 1.4.0 which was
released in may 2012.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
this patch aims to set bdi->cluster_size to the internal page size
of the iscsi target so that enabled callers can align requests
properly.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now it is possible to directly export an internal snapshot, which
can be used to probe the snapshot's contents without qemu-img
convert.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
