Commit Graph

175 Commits

Author SHA1 Message Date
Maxim Levitsky befdba9edd qcrypto-luks: more rigorous header checking
Check that keyslots don't overlap with the data,
and check that keyslots don't overlap with each other.
(this is done using naive O(n^2) nested loops,
but since there are just 8 keyslots, this doesn't really matter.

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-09-26 16:34:02 +01:00
Maxim Levitsky bd56a55a94 qcrypto-luks: simplify the math used for keyslot locations
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-09-26 16:34:02 +01:00
Maxim Levitsky 3994a7c909 qcrypto-luks: extract store key function
This function will be used later to store
new keys to the luks metadata

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-09-26 16:34:02 +01:00
Maxim Levitsky 9fa9c1c28f qcrypto-luks: extract check and parse header
This is just to make qcrypto_block_luks_open more
reasonable in size.

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-09-26 16:34:02 +01:00
Maxim Levitsky dde2c5afeb qcrypto-luks: extract store and load header
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-09-26 16:34:02 +01:00
Maxim Levitsky 61dd8a9a52 qcrypto-luks: purge unused error codes from open callback
These values are not used by generic crypto code anyway

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-09-26 16:34:02 +01:00
Maxim Levitsky 9d80e59d50 qcrypto-luks: use the parsed encryption settings in QCryptoBlockLUKS
Prior to that patch, the parsed encryption settings
were already stored into the QCryptoBlockLUKS but not
used anywhere but in qcrypto_block_luks_get_info

Using them simplifies the code

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-09-26 16:34:02 +01:00
Maxim Levitsky 7e60a6f53d qcrypto-luks: pass keyslot index rather that pointer to the keyslot
Another minor refactoring

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-09-26 16:34:02 +01:00
Maxim Levitsky 1ddd52e4b5 qcrypto-luks: simplify masterkey and masterkey length
Let the caller allocate masterkey
Always use master key len from the header

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-09-26 16:34:02 +01:00
Maxim Levitsky 70b2a1fed5 qcrypto-luks: don't overwrite cipher_mode in header
This way we can store the header we loaded, which
will be used in key management code

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-09-26 16:34:02 +01:00
Maxim Levitsky f0d3c3625c qcrypto-luks: rename some fields in QCryptoBlockLUKSHeader
* key_bytes -> master_key_len
* payload_offset = payload_offset_sector (to emphasise that this isn't byte offset)
* key_offset -> key_offset_sector - same as above for luks slots

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-09-26 16:34:02 +01:00
Daniel P. Berrangé 57b9f113fc crypto: use auto cleanup for many stack variables
Simplify cleanup paths by using glib's auto cleanup macros for stack
variables, allowing several goto jumps / labels to be eliminated.

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-08-22 10:56:57 +01:00
Daniel P. Berrangé 00f2cfbbec glib: bump min required glib library version to 2.48
Per supported platforms doc[1], the various min glib on relevant distros is:

  RHEL-8: 2.56.1
  RHEL-7: 2.50.3
  Debian (Buster): 2.58.3
  Debian (Stretch): 2.50.3
  OpenBSD (Ports): 2.58.3
  FreeBSD (Ports): 2.56.3
  OpenSUSE Leap 15: 2.54.3
  SLE12-SP2: 2.48.2
  Ubuntu (Xenial): 2.48.0
  macOS (Homebrew): 2.56.0

This suggests that a minimum glib of 2.48 is a reasonable target.

Compared to the previous version bump in

  commit e7b3af8159
  Author: Daniel P. Berrangé <berrange@redhat.com>
  Date:   Fri May 4 15:34:46 2018 +0100

    glib: bump min required glib library version to 2.40

This will result in us dropping support for Debian Jessie and
Ubuntu 14.04.

As per the commit message 14.04 was already outside our list
of supported build platforms and an exception was only made
because one of the build hosts used during merge testing was
stuck on 14.04.

Debian Jessie is justified to drop because we only aim to
support at most 2 major versions of Debian at any time. This
means Buster and Stretch at this time.

The g_strv_contains compat code is dropped as this API is
present since 2.44

The g_assert_cmpmem compat code is dropped as this API is
present since 2.46

[1] https://qemu.weilnetz.de/doc/qemu-doc.html#Supported-build-platforms

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-08-22 10:46:34 +01:00
Thomas Huth b7cbb8741b crypto: Fix LGPL information in the file headers
It's either "GNU *Library* General Public License version 2" or "GNU
Lesser General Public License version *2.1*", but there was no "version
2.0" of the "Lesser" license. So assume that version 2.1 is meant here.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-07-19 14:21:25 +01:00
Daniel P. Berrangé f887849007 crypto: fix function signatures for nettle 2.7 vs 3
Nettle version 2.7.x used 'unsigned int' instead of 'size_t' for length
parameters in functions. Use a local typedef so that we can build with
the correct signature depending on nettle version, as we already do in
the cipher code.

Reported-by: Amol Surati <suratiamol@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-07-19 12:48:22 +01:00
Daniel P. Berrangé e8e67ca4c1 crypto: switch to modern nettle AES APIs
The aes_ctx struct and aes_* functions have been deprecated in nettle
3.5, in favour of keysize specific functions which were introduced
first in nettle 3.0.

Switch QEMU code to use the new APIs and add some backcompat defines
such that it still builds on nettle 2.7

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-07-19 12:48:01 +01:00
Markus Armbruster 0553d895f9 Normalize position of header guard
This is the common header guard idiom:

    /*
     * File comment
     */

    #ifndef GUARD_SYMBOL_H
    #define GUARD_SYMBOL_H

    ... actual contents ...

    #endif

A few of our headers have some #include before the guard.
target/tilegx/spr_def_64.h has #ifndef __DOXYGEN__ outside the guard.
A few more have the #define elsewhere.

Change them to match the common idiom.  For spr_def_64.h, that means
dropping #ifndef __DOXYGEN__.  While there, rename guard symbols to
make scripts/clean-header-guards.pl happy.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190604181618.19980-2-armbru@redhat.com>
[Rebased with conflicts resolved automatically]
2019-06-12 13:20:20 +02:00
Markus Armbruster a8d2532645 Include qemu-common.h exactly where needed
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
2019-06-12 13:20:20 +02:00
Markus Armbruster 0b8fa32f55 Include qemu/module.h where needed, drop it from qemu-common.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-4-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c
hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c;
ui/cocoa.m fixed up]
2019-06-12 13:18:33 +02:00
Richard Henderson d049b1f2af crypto: Change the qcrypto_random_bytes buffer type to void*
Using uint8_t* merely requires useless casts for use with
other types to be filled with randomness.

Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-22 12:38:54 -04:00
Richard Henderson db1ed1abcf crypto: Use getrandom for qcrypto_random_bytes
Prefer it to direct use of /dev/urandom.

Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-22 12:38:54 -04:00
Richard Henderson e9979ca64e crypto: Use O_CLOEXEC in qcrypto_random_init
Avoids leaking the /dev/urandom fd into any child processes.

Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-22 12:38:54 -04:00
Richard Henderson 25fb26e4f4 crypto: Do not fail for EINTR during qcrypto_random_bytes
We can always get EINTR for read; /dev/urandom is no exception.

Rearrange the order of tests for likelihood; allow degenerate buflen==0
case to perform a no-op zero-length read.  This means that the normal
success path is a straight line with a single test for success.

Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-22 12:38:54 -04:00
Richard Henderson 14a356f475 crypto: Reverse code blocks in random-platform.c
Use #ifdef _WIN32 instead of #ifndef _WIN32.
This will make other tests easier to sequence.

Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-22 12:38:54 -04:00
Richard Henderson 243dc2cf95 build: Link user-only with crypto random number objects
For user-only, we require only the random number bits of the
crypto subsystem.  Rename crypto-aes-obj-y to crypto-user-obj-y,
and add the random number objects, plus init.o to handle any
extra stuff the crypto library requires.

Move the crypto libraries from libs_softmmu and libs_tools to
LIBS, so that they are universally used.

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-22 12:38:54 -04:00
Markus Armbruster 500016e5db trace-events: Shorten file names in comments
We spell out sub/dir/ in sub/dir/trace-events' comments pointing to
source files.  That's because when trace-events got split up, the
comments were moved verbatim.

Delete the sub/dir/ part from these comments.  Gets rid of several
misspellings.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190314180929.27722-3-armbru@redhat.com
Message-Id: <20190314180929.27722-3-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-03-22 16:18:07 +00:00
Greg Kurz 5993e3be1d crypto/block: remove redundant struct packing to fix build with gcc 9
Build fails with gcc 9:

crypto/block-luks.c:689:18: error: taking address of packed member of ‘struct QCryptoBlockLUKSHeader’ may result in an unaligned pointer value [-Werror=address-of-packed-member]
  689 |     be32_to_cpus(&luks->header.payload_offset);
      |                  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
crypto/block-luks.c:690:18: error: taking address of packed member of ‘struct QCryptoBlockLUKSHeader’ may result in an unaligned pointer value [-Werror=address-of-packed-member]
  690 |     be32_to_cpus(&luks->header.key_bytes);
      |                  ^~~~~~~~~~~~~~~~~~~~~~~
crypto/block-luks.c:691:18: error: taking address of packed member of ‘struct QCryptoBlockLUKSHeader’ may result in an unaligned pointer value [-Werror=address-of-packed-member]
  691 |     be32_to_cpus(&luks->header.master_key_iterations);
      |                  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

... a bunch of similar errors...

crypto/block-luks.c:1288:22: error: taking address of packed member of ‘struct QCryptoBlockLUKSKeySlot’ may result in an unaligned pointer value [-Werror=address-of-packed-member]
 1288 |         be32_to_cpus(&luks->header.key_slots[i].stripes);
      |                      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors

All members of the QCryptoBlockLUKSKeySlot and QCryptoBlockLUKSHeader are
naturally aligned and we already check at build time there isn't any
unwanted padding. Drop the QEMU_PACKED attribute.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-03-21 11:54:38 +00:00
Daniel P. Berrange b76806d4ec authz: delete existing ACL implementation
The 'qemu_acl' type was a previous non-QOM based attempt to provide an
authorization facility in QEMU. Because it is non-QOM based it cannot be
created via the command line and requires special monitor commands to
manipulate it.

The new QAuthZ subclasses provide a superset of the functionality in
qemu_acl, so the latter can now be deleted. The HMP 'acl_*' monitor
commands are converted to use the new QAuthZSimple data type instead
in order to provide temporary backwards compatibility.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2019-02-26 15:32:19 +00:00
Paolo Bonzini 2f9f96b242 crypto: finish removing TABs
Suggested-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05 16:50:18 +01:00
Thomas Huth e361a772ff Don't talk about the LGPL if the file is licensed under the GPL
Some files claim that the code is licensed under the GPL, but then
suddenly suggest that the user should have a look at the LGPL.
That's of course non-sense, replace it with the correct GPL wording
instead.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1548255083-8190-1-git-send-email-thuth@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-01-30 10:51:20 +01:00
Paolo Bonzini 72e21db7ea remove space-tab sequences
There are not many, and they are all simple mistakes that ended up
being committed.  Remove them.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20181213223737.11793-2-pbonzini@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-11 15:46:55 +01:00
Vladimir Sementsov-Ogievskiy c972fa123c crypto: support multiple threads accessing one QCryptoBlock
The two thing that should be handled are cipher and ivgen. For ivgen
the solution is just mutex, as iv calculations should not be long in
comparison with encryption/decryption. And for cipher let's just keep
per-thread ciphers.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-12 11:16:49 +00:00
Vladimir Sementsov-Ogievskiy 0f0d596cb1 crypto/block: introduce qcrypto_block_*crypt_helper functions
Introduce QCryptoBlock-based functions and use them where possible.
This is needed to implement thread-safe encrypt/decrypt operations.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-12 11:16:49 +00:00
Vladimir Sementsov-Ogievskiy 0270417c87 crypto/block: rename qcrypto_block_*crypt_helper
Rename qcrypto_block_*crypt_helper to qcrypto_block_cipher_*crypt_helper,
as it's not about QCryptoBlock. This is needed to introduce
qcrypto_block_*crypt_helper in the next commit, which will have
QCryptoBlock pointer and than will be able to use additional fields of
it, which in turn will be used to implement thread-safe QCryptoBlock
operations.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-12 11:16:49 +00:00
Vladimir Sementsov-Ogievskiy 1dc57b6038 crypto/block: refactor qcrypto_block_*crypt_helper functions
qcrypto_block_encrypt_helper and qcrypto_block_decrypt_helper are
almost identical, let's reduce code duplication and simplify further
improvements.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-12 11:16:49 +00:00
Vladimir Sementsov-Ogievskiy b640adca9f crypto/block-luks: fix memory leak in qcrypto_block_luks_create
Free block->cipher and block->ivgen on error path.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-12 11:16:49 +00:00
Daniel P. Berrangé a2458b6f69 io: return 0 for EOF in TLS session read after shutdown
GNUTLS takes a paranoid approach when seeing 0 bytes returned by the
underlying OS read() function. It will consider this an error and
return GNUTLS_E_PREMATURE_TERMINATION instead of propagating the 0
return value. It expects apps to arrange for clean termination at
the protocol level and not rely on seeing EOF from a read call to
detect shutdown. This is to harden apps against a malicious 3rd party
causing termination of the sockets layer.

This is unhelpful for the QEMU NBD code which does have a clean
protocol level shutdown, but still relies on seeing 0 from the I/O
channel read in the coroutine handling incoming replies.

The upshot is that when using a plain NBD connection shutdown is
silent, but when using TLS, the client spams the console with

  Cannot read from TLS channel: Broken pipe

The NBD connection has, however, called qio_channel_shutdown()
at this point to indicate that it is done with I/O. This gives
the opportunity to optimize the code such that when the channel
has been shutdown in the read direction, the error code
GNUTLS_E_PREMATURE_TERMINATION gets turned into a '0' return
instead of an error.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20181119134228.11031-1-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2018-11-19 11:16:46 -06:00
Daniel P. Berrangé 07809a7fa8 crypto: initialize sector size even when opening with no IO flag
The qcow2 block driver expects to see a valid sector size even when it
has opened the crypto layer with QCRYPTO_BLOCK_OPEN_NO_IO.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-11-05 15:09:54 +01:00
Daniel P. Berrangé aa895bd439 crypto: annotate xts_tweak_encdec as inlineable
Encouraging the compiler to inline xts_tweak_encdec increases the
performance for xts-aes-128 when built with gcrypt:

  Encrypt: 545 MB/s -> 580 MB/s
  Decrypt: 568 MB/s -> 602 MB/s

Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-10-24 19:03:37 +01:00
Daniel P. Berrangé 7dac0dd674 crypto: convert xts_mult_x to use xts_uint128 type
Using 64-bit arithmetic increases the performance for xts-aes-128
when built with gcrypt:

  Encrypt: 355 MB/s -> 545 MB/s
  Decrypt: 362 MB/s -> 568 MB/s

Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-10-24 19:03:37 +01:00
Daniel P. Berrangé db217c69f0 crypto: convert xts_tweak_encdec to use xts_uint128 type
Using 64-bit arithmetic increases the performance for xts-aes-128
when built with gcrypt:

  Encrypt: 272 MB/s -> 355 MB/s
  Decrypt: 275 MB/s -> 362 MB/s

Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-10-24 19:03:37 +01:00
Daniel P. Berrangé cc36930e40 crypto: introduce a xts_uint128 data type
The new type is designed to allow use of 64-bit arithmetic instead
of operating 1-byte at a time. The following patches will use this to
improve performance.

Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-10-24 19:03:37 +01:00
Daniel P. Berrangé 299ec87838 crypto: remove code duplication in tweak encrypt/decrypt
The tweak encrypt/decrypt functions are identical except for the
comments, so can be merged. Profiling data shows that the compiler is
in fact already merging the two merges in the object files.

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-10-24 19:03:37 +01:00
Daniel P. Berrangé 64dd2f3b5b crypto: require nettle >= 2.7.1 for building QEMU
nettle 2.7.1 was released in 2013 and all the distros that are build
target platforms for QEMU [1] include it:

  RHEL-7: 2.7.1
  Debian (Stretch): 3.3
  Debian (Jessie): 2.7.1
  OpenBSD (ports): 3.4
  FreeBSD (ports): 3.4
  OpenSUSE Leap 15: 3.4
  Ubuntu (Xenial): 3.2
  macOS (Homebrew): 3.4

Based on this, it is reasonable to require nettle >= 2.7.1 in QEMU
which allows for some conditional version checks in the code to be
removed.

[1] https://qemu.weilnetz.de/doc/qemu-doc.html#Supported-build-platforms

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-10-19 14:41:47 +01:00
Daniel P. Berrangé dea7a64e4c crypto: require libgcrypt >= 1.5.0 for building QEMU
libgcrypt 1.5.0 was released in 2011 and all the distros that are build
target platforms for QEMU [1] include it:

  RHEL-7: 1.5.3
  Debian (Stretch): 1.7.6
  Debian (Jessie): 1.6.3
  OpenBSD (ports): 1.8.2
  FreeBSD (ports): 1.8.3
  OpenSUSE Leap 15: 1.8.2
  Ubuntu (Xenial): 1.6.5
  macOS (Homebrew): 1.8.3

Based on this, it is reasonable to require libgcrypt >= 1.5.0 in QEMU
which allows for some conditional version checks in the code to be
removed.

[1] https://qemu.weilnetz.de/doc/qemu-doc.html#Supported-build-platforms

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-10-19 12:26:57 +01:00
Daniel P. Berrangé a0722409bc crypto: require gnutls >= 3.1.18 for building QEMU
gnutls 3.0.0 was released in 2011 and all the distros that are build
target platforms for QEMU [1] include it:

  RHEL-7: 3.1.18
  Debian (Stretch): 3.5.8
  Debian (Jessie): 3.3.8
  OpenBSD (ports): 3.5.18
  FreeBSD (ports): 3.5.18
  OpenSUSE Leap 15: 3.6.2
  Ubuntu (Xenial): 3.4.10
  macOS (Homebrew): 3.5.19

Based on this, it is reasonable to require gnutls >= 3.1.18 in QEMU
which allows for all conditional version checks in the code to be
removed.

[1] https://qemu.weilnetz.de/doc/qemu-doc.html#Supported-build-platforms

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-10-19 12:26:57 +01:00
Richard W.M. Jones e1a6dc91dd crypto: Implement TLS Pre-Shared Keys (PSK).
Pre-Shared Keys (PSK) is a simpler mechanism for enabling TLS
connections than using certificates.  It requires only a simple secret
key:

  $ mkdir -m 0700 /tmp/keys
  $ psktool -u rjones -p /tmp/keys/keys.psk
  $ cat /tmp/keys/keys.psk
  rjones:d543770c15ad93d76443fb56f501a31969235f47e999720ae8d2336f6a13fcbc

The key can be secretly shared between clients and servers.  Clients
must specify the directory containing the "keys.psk" file and a
username (defaults to "qemu").  Servers must specify only the
directory.

Example NBD client:

  $ qemu-img info \
    --object tls-creds-psk,id=tls0,dir=/tmp/keys,username=rjones,endpoint=client \
    --image-opts \
    file.driver=nbd,file.host=localhost,file.port=10809,file.tls-creds=tls0,file.export=/

Example NBD server using qemu-nbd:

  $ qemu-nbd -t -x / \
    --object tls-creds-psk,id=tls0,endpoint=server,dir=/tmp/keys \
    --tls-creds tls0 \
    image.qcow2

Example NBD server using nbdkit:

  $ nbdkit -n -e / -fv \
    --tls=on --tls-psk=/tmp/keys/keys.psk \
    file file=disk.img

Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-07-03 13:04:38 +01:00
Daniel P. Berrangé e7b3af8159 glib: bump min required glib library version to 2.40
Per supported platforms doc[1], the various min glib on relevant distros is:

  RHEL-7: 2.50.3
  Debian (Stretch): 2.50.3
  Debian (Jessie): 2.42.1
  OpenBSD (Ports): 2.54.3
  FreeBSD (Ports): 2.50.3
  OpenSUSE Leap 15: 2.54.3
  SLE12-SP2: 2.48.2
  Ubuntu (Xenial): 2.48.0
  macOS (Homebrew): 2.56.0

This suggests that a minimum glib of 2.42 is a reasonable target.

The GLibC compile farm, however, uses Ubuntu 14.04 (Trusty) which only
has glib 2.40.0, and this is needed for testing during merge. Thus an
exception is made to the documented platform support policy to allow for
all three current LTS releases to be supported.

Docker jobs that not longer satisfy this new min version are removed.

[1] https://qemu.weilnetz.de/doc/qemu-doc.html#Supported-build-platforms

Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-06-29 12:22:28 +01:00
Michael S. Tsirkin 986bc8ded9 crypto: use local path for local headers
When pulling in headers that are in the same directory as the C file (as
opposed to one in include/), we should use its relative path, without a
directory.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
2018-06-01 19:20:37 +03:00
Markus Armbruster 9af2398977 Include less of the generated modular QAPI headers
In my "build everything" tree, a change to the types in
qapi-schema.json triggers a recompile of about 4800 out of 5100
objects.

The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h,
qapi-types.h.  Each of these headers still includes all its shards.
Reduce compile time by including just the shards we actually need.

To illustrate the benefits: adding a type to qapi/migration.json now
recompiles some 2300 instead of 4800 objects.  The next commit will
improve it further.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-24-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-02 13:45:50 -06:00