Commit Graph

13 Commits

Author SHA1 Message Date
Alistair Francis e8e4994313 cadence_gem: Add support for screening
The Cadence GEM hardware allows incoming data to be 'screened' based on some
register values. Add support for these screens.

We also need to increase the max regs to avoid compilation failures. These new
registers are implemented in the next patch.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 73e69a8ad9fa2763e9f68f71eaf2469dd5744fcc.1469727764.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 18:13:07 +01:00
Alistair Francis 2bf57f73e3 cadence_gem: Add the num-priority-queues property
The Cadence GEM hardware supports N number priority queues, this patch is a
step towards that by adding the property to set the queues. At the moment
behaviour doesn't change as we only use queue 0.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 6543ec0d0c4bfd2678d0ed683efb197e91b17733.1469727764.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 18:13:07 +01:00
Markus Armbruster 121d07125b Clean up header guards that don't match their file name
Header guard symbols should match their file name to make guard
collisions less likely.  Offenders found with
scripts/clean-header-guards.pl -vn.

Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12 16:19:16 +02:00
Jean-Christophe Dubois a699b410d7 Add ENET/Gbps Ethernet support to FEC device
The ENET device (present in i.MX6) is "derived" from FEC and backward
compatible with it.

This patch adds the necessary support of the added feature in the ENET
device to allow Linux to use it (on supported processors).

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-02 10:42:46 +08:00
Jean-Christophe Dubois db0de35268 i.MX: move FEC device to a register array structure.
This is to prepare for the ENET Gb device of the i.MX6.

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-02 10:42:46 +08:00
Jean-Christophe Dubois 1bb3c37182 i.MX: Rename i.MX FEC defines to ENET_XXX
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-02 10:42:46 +08:00
Jean-Christophe Dubois fcbd8018e6 i.MX: Add FEC Ethernet Emulator
This is based on mcf_fec.c FEC implementation for Coldfire

  * A generic PHY was added (borrowwed from LAN9118)
  * The buffer management is also modified as buffers are
    slightly different between Coldfire and i.MX

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: fb314f8a120aa49f8f6ad886f312c649b484fb5a.1441057361.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-07 10:39:30 +01:00
Greg Ungerer 299f7bec5a hw/net: add simple phy support to mcf_fec driver
The Linux fec driver needs at least basic phy support to probe and work.
The current qemu mcf_fec emulation has no support for the reading or
writing of the MDIO lines to access an attached phy.

This code adds a very simple set of register results for a fixed phy
setup - very similar to that used on an m5208evb board. This is enough
to probe and identify an emulated attached phy.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1435296436-12152-4-git-send-email-gerg@uclinux.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-07-27 14:12:04 +01:00
Greg Ungerer 3634869b27 hw/net: add ANLPAR bit definitions to generic mii
Add a base set of bit definitions for the standard MII phy "Auto-Negotiation
Link Partner Ability Register" (ANLPAR).

The original definitions moved into mii.h from the allwinner_emac driver
did not define these.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1435296436-12152-3-git-send-email-gerg@uclinux.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-07-27 14:12:04 +01:00
Greg Ungerer 3e230569bf hw/net: create common collection of MII definitions
Create a common set of definitions of address and register values for
ethernet MII phys. A few of the current ethernet drivers have at least
a partial set of these definitions. Others just use hard coded raw
constant numbers.

This initial set is copied directly from the allwinner_emac code.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1435296436-12152-2-git-send-email-gerg@uclinux.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-07-27 14:12:04 +01:00
Peter Crosthwaite f49856d4e6 net: cadence_gem: Split state struct and type into header
Create a new header for Cadence GEM to allow using the device with
modern SoC programming conventions. The state struct needs to be
visible to embed the device in SoC containers.

Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: a98b5df6440c5bff8f813a26bb53ce1cfefb4c4c.1431381507.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-18 16:41:11 +01:00
Beniamino Galvani 103db49a10 allwinner-emac: set autonegotiation complete bit on link up
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1395771730-16882-7-git-send-email-b.galvani@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-04-17 21:34:06 +01:00
Beniamino Galvani 22f90bcb2b hw/net: add support for Allwinner EMAC Fast Ethernet controller
This patch adds support for the Fast Ethernet MAC found on Allwinner
SoCs, together with a basic emulation of Realtek RTL8201CP PHY.

Since there is no public documentation of the Allwinner controller, the
implementation is based on Linux kernel driver.

Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-08 14:50:48 +00:00