This shows how to do some "computations" in meson.build using its array
and dictionary data structures, and also a basic usage of the sourceset
module for conditional compilation.
Notice the new "if have_system" part of util/meson.build, which fixes
a bug in the old build system was buggy: util/dbus.c was built even for
non-softmmu builds, but the dependency on -lgio was lost when the linking
was done through libqemuutil.a. Because all of its users required gio
otherwise, the bug was hidden. Meson instead propagates libqemuutil's
dependencies down to its users, and shows the problem.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is possible to specify the trace/ directory already in objs-y;
there is no need to have a separate unnest-vars invocation.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 0ab8ed18a6 ("trace: switch to
modular code generation for sub-directories") forgot to convert "tcg"
trace events to the modular code generation approach where each
sub-directory has its own trace-events file.
This patch fixes compilation for "tcg" trace events. Currently they are
only used in the root ./trace-events file.
"tcg" trace events can only be used in the root ./trace-events file for
the time being.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170327131718.18268-1-stefanha@redhat.com
Suggested-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The build rules for trace files have a dependancy on $(tracetool-y).
This variable populated in the trace/Makefile.objs file and thus its
definition gets pulled into the top level makefile. This happens too
late in the process though, so by the time $(tracetool-y) is defined,
make has already evaluated $(tracetool-y) in the dependancies and
found it to be empty. The result is that when the tracetool source
is changed, the generated files are not rebuilt. The solution is to
define the variable in the top level makefile too
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Message-id: 20170315123421.28815-1-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Introduce rules in the top level Makefile that are able to generate
trace.[ch] files in every subdirectory which has a trace-events file.
The top level directory is handled specially, so instead of creating
trace.h, it creates trace-root.h. This allows sub-directories to
include the top level trace-root.h file, without ambiguity wrt to
the trace.g file in the current sub-dir.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170125161417.31949-7-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Having tracetool.py figure out the right group name from just
the input filename is not practical when considering the
different build vs src path combinations. Instead simply take
the group name as a command line arg from the Makefile, which
can trivially provide the right name.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170125161417.31949-6-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Instead of reading the contents of 'trace-events' from stdin,
accept the filename as a positional parameter. This also
allows for reading from multiple files, though this facility
is not used at this time.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-20-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently the generated-events.[ch] files contain the
event dstates, constants and TraceEvent structs, while the
generated-tracers.[ch] files contain the actual trace
probe logic. With the removal of usage of the event enums
from the API there is no longer any compelling reason for
the separation between these files. The generated-events.h
content is only ever needed from the generated-tracers.[ch]
files.
The enums/constants/structs from generated-events.[ch] are
thus moved into the generated-tracers.[ch], so that there
is one less file to be generated.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-17-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The quiet-command make rule currently takes two arguments:
the command and arguments to run, and a string to print if
the V flag is not set (ie we are not being verbose).
By convention, the string printed is of the form
" NAME some args". Unfortunately to get nicely lined up
output all the strings have to agree about what column the
arguments should start in, which means that if we add a
new quiet-command usage which wants a slightly longer CMD
name then we either put up with misalignment or change
every quiet-command string.
Split the quiet-mode string into two, the "NAME" and
the "same args" part, and use printf(1) to format the
string automatically. This means we only need to change
one place if we want to support a longer maximum name.
In particular, we can now print 7-character names lined
up properly (they are needed for the OSX "SETTOOL" invocation).
Change all the uses of quiet-command to the new syntax.
(Any which are missed or inadvertently reintroduced
via later merges will result in slightly misformatted
quiet output rather than disaster.)
A few places in the pc-bios/ makefiles are updated to use
"BUILD", "SIGN" and "STRIP" rather than "Building",
"Signing" and "Stripping" for consistency and to keep them
below 7 characters. Module .mo links now print "LD" rather
than the nonstandard "LD -r".
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1475598441-27908-1-git-send-email-peter.maydell@linaro.org
Each vCPU gets a 'trace_dstate' bitmap to control the per-vCPU dynamic
tracing state of events with the 'vcpu' property.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Switch make rules over to use trace-events-all as the
master trace events input file. Add rule that will
construct trace-events-all from $(trace-events-y).
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-2-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Patches that change tracetool can break the build if old build output
files are lying around.
This happens because the Makefile does not specify dependencies on
tracetool. The build will use old object files that do not match the
current source code.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The Makefile uses intermediate timestamp files to avoid rebuilding if
tracetool output is unchanged.
Timestamps are implemented incorrectly. This was fixed for rules.mak in
commit 4b25966ab9 ("rules.mak: cleanup
config generation rules") but never fixed in trace/Makefile.objs.
The problem with the old timestamp implementation was that make doesn't
notice the updated file modification time until the next time it is run.
It was necessary to run make twice in a row to achieve a full rebuild.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In any other cases the object file is effectively empty, which is
disliked by ranlib and nm on Mac OS X.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Generate header "trace/generated-tcg-tracers.h" with the necessary routines for
tracing events in guest code:
* trace_${event}_tcg
Convenience wrapper that calls the translation-time tracer
'trace_${event}_trans', and calls 'gen_helper_trace_${event}_exec to
generate the TCG code to later trace the event at execution time.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Generates header "trace/generated-helpers-wrappers.h" with definitions for TCG
helper wrappers.
These wrappers ('gen_helper_trace_${event}_exec_wrapper') transform mixed native
and TCG argument types to TCG types and call the actual TCG helpers
('gen_helper_trace_${event}_exec_proxy').
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Generates file "trace/generated-helpers.c" with TCG helper definitions to trace
events in guest code at execution time.
The helpers ('helper_trace_${event}_exec_proxy') cast the TCG-compatible native
argument types to their original types (as defined in "trace-events") and call
the tracing routine ('trace_${event}_exec').
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Generates file "trace/generated-helpers.h" with TCG helper declarations to trace
events in guest code at execution time ('trace_${event}_exec_proxy').
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Adds support to compile QEMU with multiple tracing backends at the same time.
For example, you can compile QEMU with:
$ ./configure --enable-trace-backends=ftrace,dtrace
Where 'ftrace' can be handy for having an in-flight record of events, and 'dtrace' can be later used to extract more information from the system.
This patch allows having both available without recompiling QEMU.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Backends now only contain the essential backend-specific code, and most of the work is moved to frontend code.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add generation of new files for LTTng ust.
Signed-off-by: Mohamad Gebai <mohamad.gebai@polymtl.ca>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch adds a ftrace tracing backend which sends trace event to
ftrace marker file. You can effectively compare qemu trace data and
kernel(especially, kvm.ko when using KVM) trace data.
The ftrace backend is restricted to Linux only.
To try out the ftrace backend:
$ ./configure --trace-backend=ftrace
$ make
if you use KVM, enable kvm events in ftrace:
# sudo echo 1 > /sys/kernel/debug/tracing/events/kvm/enable
After running qemu by root user, you can get the trace:
# cat /sys/kernel/debug/tracing/trace
Signed-off-by: Eiichi Tsukata <eiichi.tsukata.xh@hitachi.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Make sure to rebuild generated-events.o when ./configure options change.
This prevents linker errors when a stale generated-events.o gets linked
with code compiled against fresh headers. For example, try building
with ./configure --enable-trace-backend=stderr followed by ./configure
--enable-trace-backend=dtrace.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Uses tracetool to generate a backend-independent tracing event description
(struct TraceEvent).
The values for such structure are generated with the non-public "events"
backend ("events-c" frontend).
The generation of the defines to check if an event is statically enabled is also
moved to the "events" backend ("events-h" frontend).
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
--
Changes in v2:
* Do not depend on "qemu-timer-common.o".
* Use "$(obj)" in rules to refer to the build sub-directory.
* Remove dependencies against "$(GENERATED_HEADERS)".
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Paolo Bonzini
Stefan Hajnoczi
Daniel P. Berrange
Peter Maydell
Lluís Vilanova
Fam Zheng
Mohamad Gebai
Eiichi Tsukata
Michael S. Tsirkin