Switch this test over to using a cloud image like the base CentOS8 VM
test, which helps make this script a bit simpler too.
Note: At time of writing, this test seems pretty flaky when run without
KVM support for aarch64. Certain unit tests like migration-test,
virtio-net-failover, test-hmp and qom-test seem quite prone to fail
under TCG. Still, this is an improvement in that at least pure build
tests are functional.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220708153503.18864-5-jsnow@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The old CentOS image didn't work anymore because it was already EOL at
the beginning of 2022.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220708153503.18864-4-jsnow@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If the initial setup fails, you've permanently altered the state of the
downloaded image in an unknowable way. Use 'cp' like our other test
setup scripts do.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220708153503.18864-3-jsnow@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
There is nothing in the specs on DMA engine interrupt lines: it should have
been in the "BCM2835 ARM Peripherals" datasheet but the appropriate
"ARM peripherals interrupt table" (p.113) is nearly empty.
All Raspberry Pi models 1-3 (based on bcm2835) have
Linux device tree (arch/arm/boot/dts/bcm2835-common.dtsi +25):
/* dma channel 11-14 share one irq */
This information is repeated in the driver code
(drivers/dma/bcm2835-dma.c +1344):
/*
* in case of channel >= 11
* use the 11th interrupt and that is shared
*/
In this patch channels 0--10 and 11--14 are handled separately.
Signed-off-by: Andrey Makarov <andrey.makarov@auriga.com>
Message-id: 20220716113210.349153-1-andrey.makarov@auriga.com
[PMM: fixed checkpatch nits]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The correct bit for the CONV bit in NPCM7XX ADC is bit 13. This patch
fixes that in the module, and also lower the IRQ when the guest
is done handling an interrupt event from the ADC module.
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Patrick Venture<venture@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220714182836.89602-4-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* New ISL69259 device model
* New fby35 multi-SoC machine (AST1030 BIC + AST2600 BMC)
* Aspeed GPIO fixes
* Extension of m25p80 with write protect bits
* More avocado tests using the Aspeed SDK
-----BEGIN PGP SIGNATURE-----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=faie
-----END PGP SIGNATURE-----
Merge tag 'pull-aspeed-20220714' of https://github.com/legoater/qemu into staging
aspeed queue:
* New ISL69259 device model
* New fby35 multi-SoC machine (AST1030 BIC + AST2600 BMC)
* Aspeed GPIO fixes
* Extension of m25p80 with write protect bits
* More avocado tests using the Aspeed SDK
# gpg: Signature made Thu 14 Jul 2022 15:28:09 BST
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-aspeed-20220714' of https://github.com/legoater/qemu:
aspeed: Add fby35-bmc slot GPIO's
hw/gpio/aspeed: Don't let guests modify input pins
qtest/aspeed_gpio: Add input pin modification test
hw: m25p80: add tests for BP and TB bit write protect
hw: m25p80: Add Block Protect and Top Bottom bits for write protect
test/avocado/machine_aspeed.py: Add SDK tests
docs: aspeed: Minor updates
docs: aspeed: Add fby35 multi-SoC machine section
aspeed: Add AST1030 (BIC) to fby35
aspeed: fby35: Add a bootrom for the BMC
aspeed: Add AST2600 (BMC) to fby35
aspeed: Add fby35 skeleton
aspeed: Make aspeed_board_init_flashes public
aspeed: Refactor UART init for multi-SoC machines
aspeed: Create SRAM name from first CPU index
hw/sensor: Add Renesas ISL69259 device model
hw/sensor: Add IC_DEVICE_ID to ISL voltage regulators
hw/i2c/pmbus: Add idle state to return 0xff's
aspeed: sbc: Allow per-machine settings
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* pre-install data files in the build directory (Akihiko)
* SCSI fixes for Mac OS (Mark)
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmLO3bQUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNv5AgAgGe8hGOcqJSzmFgeUJ7UEaauap6E
fF4zau8Xux7R6pnvPe2FeJ70AlvstFAUoU++7G3linQ+eqnFD7E18KQkfp9qX7jY
xDFPJRf6JNhwDjxQ2Tp0ShOcm5HkDv4Z4cPlx0T+wfKTlUWCzNEkhVrjOhpDYnSe
OldsdFjY0sUjZ1R/QNiuQ65aWwOr9gJ07KfakJQMX2YCMun6SO3kB/GtmyecTV3C
uNAUIdqJLsEbR1ckdMVVmixhtzMPW2R7/vjJkxG8RXUAcDmDHkuKPhWKyZ9a7/hh
CV8iMQMup6mgT8ndb5DWv551Y+C/rA1bH9U1NkaeQ9RP83CE4a6fpSMiiQ==
=82zT
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* SCSI fuzzing fix (Mauro)
* pre-install data files in the build directory (Akihiko)
* SCSI fixes for Mac OS (Mark)
# gpg: Signature made Wed 13 Jul 2022 15:59:00 BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
pc-bios/s390-ccw: add -Wno-array-bounds
q800: add default vendor and product information for scsi-cd devices
q800: add default vendor and product information for scsi-hd devices
scsi-disk: allow MODE SELECT block descriptor to set the block size
scsi-disk: allow the MODE_PAGE_R_W_ERROR AWRE bit to be changeable for CDROM drives
q800: implement compat_props to enable quirk_mode_page_truncated for scsi-cd devices
scsi-disk: add SCSI_DISK_QUIRK_MODE_PAGE_TRUNCATED quirk for Macintosh
scsi-disk: add FORMAT UNIT command
q800: implement compat_props to enable quirk_mode_page_vendor_specific_apple for scsi devices
scsi-disk: add SCSI_DISK_QUIRK_MODE_PAGE_VENDOR_SPECIFIC_APPLE quirk for Macintosh
q800: implement compat_props to enable quirk_mode_sense_rom_use_dbd for scsi-cd devices
scsi-disk: add SCSI_DISK_QUIRK_MODE_SENSE_ROM_USE_DBD quirk for Macintosh
q800: implement compat_props to enable quirk_mode_page_apple_vendor for scsi-cd devices
scsi-disk: add MODE_PAGE_APPLE_VENDOR quirk for Macintosh
scsi-disk: add new quirks bitmap to SCSIDiskState
meson: Prefix each element of firmware path
module: Use bundle mechanism
datadir: Use bundle mechanism
cutils: Introduce bundle mechanism
scsi/lsi53c895a: really fix use-after-free in lsi_do_msgout (CVE-2022-0216)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Up until now, guests could modify input pins by overwriting the data
value register. The guest OS should only be allowed to modify output pin
values, and the QOM property setter should only be permitted to modify
input pins.
This change also updates the gpio input pin test to match this
expectation.
Andrew suggested this particularly refactoring here:
https://lore.kernel.org/qemu-devel/23523aa1-ba81-412b-92cc-8174faba3612@www.fastmail.com/
Suggested-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Peter Delevoryas <peter@pjd.dev>
Fixes: 4b7f956862 ("hw/gpio: Add basic Aspeed GPIO model for AST2400 and AST2500")
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220712023219.41065-3-peter@pjd.dev>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Verify the current behavior, which is that input pins can be modified by
guest OS register writes.
Signed-off-by: Peter Delevoryas <peter@pjd.dev>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220712023219.41065-2-peter@pjd.dev>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The Aspeed SDK kernel usually includes support for the lastest HW
features. This is interesting to exercise QEMU and discover the gaps
in the models.
Add extra I2C tests for the AST2600 EVB machine to check the new
register interface.
Message-Id: <20220707091239.1029561-1-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
softmmu/datadir.c had its own implementation to find files in the
build tree, but now bundle mechanism provides the unified
implementation which works for datadir and the other files.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20220624145039.49929-4-akihiko.odaki@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Set current_req to NULL, not current_req->req, to prevent reusing a free'd
buffer in case of repeated SCSI cancel requests. Also apply the fix to
CLEAR QUEUE and BUS DEVICE RESET messages as well, since they also cancel
the request.
Thanks to Alexander Bulekov for providing a reproducer.
Fixes: CVE-2022-0216
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/972
Signed-off-by: Mauro Matteo Cascella <mcascell@redhat.com>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20220711123316.421279-1-mcascell@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
I like to build QEMU from the root source directory [*], rather
than cd'ing into the build directory. This code may as well include
a search path for that, so that you can run avocado tests individually
without specifying "-p qemu_bin=build/qemu-system-arm" manually.
[*] See commit dedad02720 ("configure: add support for pseudo-"in source tree" builds")
Signed-off-by: Peter Delevoryas <peter@pjd.dev>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220702185604.46643-1-peter@pjd.dev>
[PMD: Mention commit dedad02720]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
- Refactoring for non-coroutine variants of bdrv/blk_co_* functions:
Auto-generate more of them with the block coroutine wrapper generator
script
- iotest fixes
- Both for the storage daemon and the system emulator: Fix PID file
handling when daemonizing (store the absolute path and delete that on
exit, which is necessary because daemonizing will change the working
directory to /)
-----BEGIN PGP SIGNATURE-----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=Z5a+
-----END PGP SIGNATURE-----
Merge tag 'pull-block-2022-07-12' of https://gitlab.com/hreitz/qemu into staging
Block patches:
- Refactoring for non-coroutine variants of bdrv/blk_co_* functions:
Auto-generate more of them with the block coroutine wrapper generator
script
- iotest fixes
- Both for the storage daemon and the system emulator: Fix PID file
handling when daemonizing (store the absolute path and delete that on
exit, which is necessary because daemonizing will change the working
directory to /)
# gpg: Signature made Tue 12 Jul 2022 19:04:14 BST
# gpg: using RSA key CB62D7A0EE3829E45F004D34A1FA40D098019CDF
# gpg: issuer "hreitz@redhat.com"
# gpg: Good signature from "Hanna Reitz <hreitz@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: CB62 D7A0 EE38 29E4 5F00 4D34 A1FA 40D0 9801 9CDF
* tag 'pull-block-2022-07-12' of https://gitlab.com/hreitz/qemu: (35 commits)
vl: Unlink absolute PID file path
vl: Conditionally register PID file unlink notifier
qsd: Unlink absolute PID file path
iotests/297: Have mypy ignore unused ignores
qsd: Do not use error_report() before monitor_init
block: Remove remaining unused symbols in coroutines.h
block: Reorganize some declarations in block-backend-io.h
block: Add blk_co_truncate()
block: Add blk_co_ioctl()
block: Implement blk_flush() using generated_co_wrapper
block: Implement blk_pdiscard() using generated_co_wrapper
block: Implement blk_pwrite_zeroes() using generated_co_wrapper
block: Add blk_co_pwrite_compressed()
block: Change blk_pwrite_compressed() param order
block: Export blk_pwritev_part() in block-backend-io.h
block: Add blk_[co_]preadv_part()
block: Add blk_{preadv,pwritev}()
block: Implement blk_{pread,pwrite}() using generated_co_wrapper
block: Make blk_co_pwrite() take a const buffer
block: Make 'bytes' param of blk_{pread,pwrite}() an int64_t
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* fix cross compilation CFLAGS and compiler choice
* do not specify -bios option for tests/vm
* miscellaneous fixes
* preparation for pre-install tree in the build directory (Akihiko)
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmLNbVcUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroO1KggArZDxqEOyTCvsu2H1Bf7j2J4Mfx2k
+8FiDNpdfnmpQIc8KnQHZN7QKodXhaPwShoK6NZPYeAbg62n5/RUlF+fj2DbdCN0
udBqt9V5dmjF2S+vb2++pWSpEUpqH1yAVYX3t0MvQDkfscADYYqYndHkYqVP34Sy
sIIkDGdFODQqHCPDmNNFWFHt8X5Zu8t5j53NjPebdryZBDiA4DgFnorTw0sTPV1H
XeS2M06C1lkGyWrdy7eaF9IL3tmlCsuc6xiA0RAhzJiWgHe1LQZOUPMfR+GKuidI
E9Cz05iGyOlH+CNYgdukqT8BdJtcjWZwDgYWVxVIswv461h/asoENUIx1g==
=Nyzq
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* fuzzing fixes (Alexander)
* fix cross compilation CFLAGS and compiler choice
* do not specify -bios option for tests/vm
* miscellaneous fixes
* preparation for pre-install tree in the build directory (Akihiko)
# gpg: Signature made Tue 12 Jul 2022 13:47:19 BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
meson: place default firmware path under .../share
qga: Relocate a path emitted in the help text
build: Do not depend on pc-bios for config-host.mak
accel: kvm: Fix memory leak in find_stats_descriptors
audio/dbus: fix building
fuzz: only use generic-fuzz targets on oss-fuzz
build: improve -fsanitize-coverage-allowlist check
build: try both native and cross compilers
configure: pass whole target name to probe_target_compiler
tests/tcg: compile system emulation tests as freestanding
configure: write EXTRA_CFLAGS for all sub-Makefiles
configure: allow more host/target combos to use the host compiler
configure, pc-bios/vof: pass cross CFLAGS correctly
configure, pc-bios/s390-ccw: pass cross CFLAGS correctly
configure, pc-bios/optionrom: pass cross CFLAGS correctly
pc-bios/optionrom: use -m16 unconditionally
scsi/lsi53c895a: fix use-after-free in lsi_do_msgout (CVE-2022-0216)
tests/vm: do not specify -bios option
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# pc-bios/s390-ccw/netboot.mak
e7874a50ff ("python: update for mypy 0.950") has added
`warn_unused_ignores = False` to python/setup.cfg, to be able to keep
compatibility with both pre- and post-0.950 mypy versions.
The iotests' mypy.ini needs the same, or 297 will fail (on both pre- and
post-0.950 mypy, as far as I can tell; just for different `ignore`
lines).
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220621092536.19837-1-hreitz@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Also convert blk_truncate() into a generated_co_wrapper.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-17-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-13-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Also convert blk_pwrite_compressed() into a generated_co_wrapper.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-12-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Also convert it into a generated_co_wrapper.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-10-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Implement blk_preadv_part() using generated_co_wrapper.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-9-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Implement them using generated_co_wrapper.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-8-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Swap 'buf' and 'bytes' around for consistency with
blk_co_{pread,pwrite}(), and in preparation to implement these functions
using generated_co_wrapper.
Callers were updated using this Coccinelle script:
@@ expression blk, offset, buf, bytes, flags; @@
- blk_pread(blk, offset, buf, bytes, flags)
+ blk_pread(blk, offset, bytes, buf, flags)
@@ expression blk, offset, buf, bytes, flags; @@
- blk_pwrite(blk, offset, buf, bytes, flags)
+ blk_pwrite(blk, offset, bytes, buf, flags)
It had no effect on hw/block/nand.c, presumably due to the #if, so that
file was updated manually.
Overly-long lines were then fixed by hand.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-4-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
For consistency with other I/O functions, and in preparation to
implement it using generated_co_wrapper.
Callers were updated using this Coccinelle script:
@@ expression blk, offset, buf, bytes; @@
- blk_pread(blk, offset, buf, bytes)
+ blk_pread(blk, offset, buf, bytes, 0)
It had no effect on hw/block/nand.c, presumably due to the #if, so that
file was updated manually.
Overly-long lines were then fixed by hand.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-3-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
They currently return the value of their 'bytes' parameter on success.
Make them return 0 instead, for consistency with other I/O functions and
in preparation to implement them using generated_co_wrapper. This also
makes it clear that short reads/writes are not possible.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Message-Id: <20220705161527.1054072-2-afaria@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
In certain container environments we may not have FUSE at all, so skip
the test in this circumstance too.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20220616142659.3184115-3-jsnow@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Fixes: 58a6fdcc
Signed-off-by: John Snow <jsnow@redhat.com>
Tested-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220616142659.3184115-2-jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
They currently return the value of their headerlen/buflen parameter on
success. Returning 0 instead makes it clear that short reads/writes are
not possible.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220609152744.3891847-5-afaria@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
They currently return the value of their 'bytes' parameter on success.
Make them return 0 instead, for consistency with other I/O functions and
in preparation to implement them using generated_co_wrapper. This also
makes it clear that short reads/writes are not possible.
The few callers that rely on the previous behavior are adjusted
accordingly by hand.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220609152744.3891847-4-afaria@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Declare that we need copy-before-write filter to avoid failure when
filter is not whitelisted.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220706170834.242277-1-vsementsov@yandex-team.ru>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
strerror() represents ETIMEDOUT a bit different in Linux and macOS /
FreeBSD. Let's support the latter too.
Fixes: 9d05a87b77 ("iotests: copy-before-write: add cases for cbw-timeout option")
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705153708.186418-1-vsementsov@yandex-team.ru>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add mffsce test to check both the return value and the new fpscr
stored in the cpu.
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220629162904.105060-8-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
System emulation tests do not run in a hosted environment, since they
do not link with libc. They should only use freestanding headers
(float.h, limits.h, stdarg.h, stddef.h, stdbool.h, stdint.h,
stdalign.h, stdnoreturn.h) and should be compiled with -ffreestanding
in order to use the compiler implementation of those headers
rather than the one in libc.
Some tests are using inttypes.h instead of stdint.h, so fix that.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When running from the build tree, the executable is able to find
the BIOS on its own; when running from the source tree, a firmware
blob should already be installed and there is no guarantee that
the one in the source tree works with the QEMU that is being used for
the installation.
Just remove the -bios option, since it is unnecessary and in fact
there are other x86 VM tests that do not bother specifying it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The different migration test cases are using a variety of settings
to ensure convergance/non-convergance. Introduce two helpers to
extra the common functionality and ensure consistency.
* Non-convergance: 1ms downtime, 30mbs bandwidth
* Convergance: 30s downtime, 1gbs bandwidth
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20220628105434.295905-5-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
While 1 second might be enough to converge migration on a fast host,
this is not guaranteed, especially if using TLS in the tests without
hardware accelerated crypto available.
Increasing the downtime to 30 seconds should guarantee it can converge
in any sane scenario.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220628105434.295905-4-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When moving into the convergance phase, the precopy tests will first
look for a STOP event and once found will look for migration completion
status. If the test VM is not converging, the test suite will be waiting
for the STOP event forever. If we wait for the migration completion
status first, then we will trigger the previously added timeout and
prevent the test hanging forever.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220628105434.295905-3-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Currently the wait_for_migration_fail and wait_for_migration_complete
functions will spin in an infinite loop checking query-migrate status
to detect a specific change/goal. This is fine when everything goes
to plan, but when the unusual happens, these will hang the test suite
forever.
Any normally executing migration test case normally takes < 1 second
for a state change, with exception of the autoconverge test which
takes about 5 seconds. Taking into account possibility of people
running tests inside TCG, allowing a factor of x20 slowdown gives
a reasonable worst case of 120 seconds. Anything taking longer than
this is a strong sign that the test has hung, or the test should be
rewritten to be faster.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220628105434.295905-2-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Technically we don't need the TCG accelerator to run the
softfloat3 tests. However it is unlikely an interesting
build combination. Developers using softfloat3 likely use
TCG too. Similarly, developers disabling TCG shouldn't
mind much about softfloat3 tests.
This reduces a non-TCG build by 474 objects!
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220204152924.6253-3-f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reported by ASAN.
Fixes commit cfb34489 ("cutils: add functions for IEC and SI prefixes").
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220621083420.66365-1-marcandre.lureau@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
While we set env->bins when unwinding for ILLEGAL_INST,
from e.g. csrrw, we weren't setting it for immediately
illegal instructions.
Add a testcase for mtval via both exception paths.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1060
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220604231004.49990-2-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add two simple test-cases: timeout failure with
break-snapshot-on-cbw-error behavior and similar with
break-guest-write-on-cbw-error behavior.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Add tests for new option of copy-before-write filter: on-cbw-error.
Note that we use QEMUMachine instead of VM class, because in further
commit we'll want to use throttling which doesn't work with -accel
qtest used by VM.
We also touch pylintrc to not break iotest 297.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
[vsementsov: add arguments to QEMUMachine constructor]
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Now that all QEMUFile callbacks are removed, the entire concept can be
deleted.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This is for code which needs a portable equivalent to a QIOChannelFile
connected to /dev/null.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
