In commit 7c4ee5bcc8 we changed the order in which we construct
the AUXV, but forgot to adjust the calculation of the length. The
result is that we set info->auxv_len to a bogus and negative value,
and then later on the code in open_self_auxv() gets confused and
ends up presenting the guest with an empty file.
Since we now have to calculate the auxv length up-front as part
of figuring out how much we're going to put on the stack, set
info->auxv_len then; this allows us to assert that we put the
same number of entries into auxv as we pre-calculated, rather
than merely having a comment saying we need to do that.
Fixes: https://bugs.launchpad.net/qemu/+bug/1728116
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
SPARC is like Alpha in its handling of the rt_sigaction syscall:
it takes an extra parameter 'restorer' which needs to be copied
into the sa_restorer field of the sigaction struct. The order
of the arguments differs slightly between SPARC and Alpha but
the implementation is otherwise the same. (Compare the
rt_sigaction() functions in arch/sparc/kernel/sys_sparc_64.c
and arch/alpha/kernel/signal.c.)
Note that this change is somewhat moot until SPARC acquires
support for actually delivering RT signals.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
For faults on loads and stores, ppc_cpu_handle_mmu_fault() in
target/ppc/user_only_helper.c stores the offending address
in env->spr[SPR_DAR]. Report this correctly to the guest
in si_addr, rather than incorrectly using the address of the
instruction that caused the fault.
This fixes the test case in
https://bugs.launchpad.net/qemu/+bug/1077116
for ppc, ppc64 and ppc64le.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
For s390x, the address passed to a signal handler in the
siginfo_t si_addr field is masked (in the kernel this is done in
do_sigbus() and do_sigsegv() in arch/s390/mm/fault.c). Implement
this architecture-specific oddity in linux-user.
This is one of the issues described in
https://bugs.launchpad.net/qemu/+bug/1705118
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
If an application tries to install a seccomp filter using
prctl(PR_SET_SECCOMP), the filter is likely for the target instead of the host
architecture. This will probably cause qemu to be immediately killed when it
executes another syscall.
Prevent this from happening by returning EINVAL from both seccomp prctl
calls. This is the error returned by the kernel when seccomp support is
disabled.
Fixes: https://bugs.launchpad.net/qemu/+bug/1726394
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: James Cowgill <james.cowgill@mips.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Fixes: https://bugs.launchpad.net/qemu/+bug/1716767
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-By: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: James Clarke <jrtc27@jrtc27.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Add the missing defines and for TARGET_MAP_STACK and TARGET_MAP_HUGETLB
for alpha, mips, ppc, x86, hppa. Fix the mmap_flags translation table
to translate MAP_HUGETLB between host and target architecture, and to
drop MAP_STACK.
Signed-off-by: Helge Deller <deller@gmx.de>
Message-Id: <20170311183016.GA20514@ls3530.fritz.box>
[rth: Drop MAP_STACK instead of translating it, since it is ignored
in the kernel anyway. Fix tabs to spaces.]
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
TARGET_MAP_TYPE needs to be 0x03 instead of 0x0f on the hppa
architecture, otherwise it conflicts with MAP_FIXED which is 0x04.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-ID: <20170311175019.GA7195@ls3530.fritz.box>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
By failing to return from the syscall in the child, the child
issues another clone syscall and hilarity ensues.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reading and writing to an sa_restorer member that isn't supposed to
exist corrupts user memory. Introduce TARGET_ARCH_HAS_SA_RESTORER,
similar to the kernel's __ARCH_HAS_SA_RESTORER.
Reported-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
currently for sh4 cpu_model argument for '-cpu' option
could be either 'cpu model' name or cpu_typename.
however typically '-cpu' takes 'cpu model' name and
cpu type for sh4 target isn't advertised publicly
('-cpu help' prints only 'cpu model' names) so we
shouldn't care about this use case (it's more of a bug).
1. Drop '-cpu cpu_typename' to align with the rest of
targets.
2. Compose searched for typename from cpu model and use
it with object_class_by_name() directly instead of
over-complicated
object_class_get_list()
g_slist_find_custom() + superh_cpu_name_compare()
With #1 droped, #2 could be used for both lookups which
simplifies superh_cpu_class_by_name() quite a bit.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1507211474-188400-23-git-send-email-imammedo@redhat.com>
[ehabkost: Include fixup sent by Igor]
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This enables parallel TCG code generation. However, we do not take
advantage of it yet since tb_lock is still held during tb_gen_code.
In user-mode we use a single TCG context; see the documentation
added to tcg_region_init for the rationale.
Note that targets do not need any conversion: targets initialize a
TCGContext (e.g. defining TCG globals), and after this initialization
has finished, the context is cloned by the vCPU threads, each of
them keeping a separate copy.
TCG threads claim one entry in tcg_ctxs[] by atomically increasing
n_tcg_ctxs. Do not be too annoyed by the subsequent atomic_read's
of that variable and tcg_ctxs; they are there just to play nice with
analysis tools such as thread sanitizer.
Note that we do not allocate an array of contexts (we allocate
an array of pointers instead) because when tcg_context_init
is called, we do not know yet how many contexts we'll use since
the bool behind qemu_tcg_mttcg_enabled() isn't set yet.
Previous patches folded some TCG globals into TCGContext. The non-const
globals remaining are only set at init time, i.e. before the TCG
threads are spawned. Here is a list of these set-at-init-time globals
under tcg/:
Only written by tcg_context_init:
- indirect_reg_alloc_order
- tcg_op_defs
Only written by tcg_target_init (called from tcg_context_init):
- tcg_target_available_regs
- tcg_target_call_clobber_regs
- arm: arm_arch, use_idiv_instructions
- i386: have_cmov, have_bmi1, have_bmi2, have_lzcnt,
have_movbe, have_popcnt
- mips: use_movnz_instructions, use_mips32_instructions,
use_mips32r2_instructions, got_sigill (tcg_target_detect_isa)
- ppc: have_isa_2_06, have_isa_3_00, tb_ret_addr
- s390: tb_ret_addr, s390_facilities
- sparc: qemu_ld_trampoline, qemu_st_trampoline (build_trampolines),
use_vis3_instructions
Only written by tcg_prologue_init:
- 'struct jit_code_entry one_entry'
- aarch64: tb_ret_addr
- arm: tb_ret_addr
- i386: tb_ret_addr, guest_base_flags
- ia64: tb_ret_addr
- mips: tb_ret_addr, bswap32_addr, bswap32u_addr, bswap64_addr
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is groundwork for supporting multiple TCG contexts.
The naive solution here is to split code_gen_buffer statically
among the TCG threads; this however results in poor utilization
if translation needs are different across TCG threads.
What we do here is to add an extra layer of indirection, assigning
regions that act just like pages do in virtual memory allocation.
(BTW if you are wondering about the chosen naming, I did not want
to use blocks or pages because those are already heavily used in QEMU).
We use a global lock to serialize allocations as well as statistics
reporting (we now export the size of the used code_gen_buffer with
tcg_code_size()). Note that for the allocator we could just use
a counter and atomic_inc; however, that would complicate the gathering
of tcg_code_size()-like stats. So given that the region operations are
not a fast path, a lock seems the most reasonable choice.
The effectiveness of this approach is clear after seeing some numbers.
I used the bootup+shutdown of debian-arm with '-tb-size 80' as a benchmark.
Note that I'm evaluating this after enabling per-thread TCG (which
is done by a subsequent commit).
* -smp 1, 1 region (entire buffer):
qemu: flush code_size=83885014 nb_tbs=154739 avg_tb_size=357
qemu: flush code_size=83884902 nb_tbs=153136 avg_tb_size=363
qemu: flush code_size=83885014 nb_tbs=152777 avg_tb_size=364
qemu: flush code_size=83884950 nb_tbs=150057 avg_tb_size=373
qemu: flush code_size=83884998 nb_tbs=150234 avg_tb_size=373
qemu: flush code_size=83885014 nb_tbs=154009 avg_tb_size=360
qemu: flush code_size=83885014 nb_tbs=151007 avg_tb_size=370
qemu: flush code_size=83885014 nb_tbs=151816 avg_tb_size=367
That is, 8 flushes.
* -smp 8, 32 regions (80/32 MB per region) [i.e. this patch]:
qemu: flush code_size=76328008 nb_tbs=141040 avg_tb_size=356
qemu: flush code_size=75366534 nb_tbs=138000 avg_tb_size=361
qemu: flush code_size=76864546 nb_tbs=140653 avg_tb_size=361
qemu: flush code_size=76309084 nb_tbs=135945 avg_tb_size=375
qemu: flush code_size=74581856 nb_tbs=132909 avg_tb_size=375
qemu: flush code_size=73927256 nb_tbs=135616 avg_tb_size=360
qemu: flush code_size=78629426 nb_tbs=142896 avg_tb_size=365
qemu: flush code_size=76667052 nb_tbs=138508 avg_tb_size=368
Again, 8 flushes. Note how buffer utilization is not 100%, but it
is close. Smaller region sizes would yield higher utilization,
but we want region allocation to be rare (it acquires a lock), so
we do not want to go too small.
* -smp 8, static partitioning of 8 regions (10 MB per region):
qemu: flush code_size=21936504 nb_tbs=40570 avg_tb_size=354
qemu: flush code_size=11472174 nb_tbs=20633 avg_tb_size=370
qemu: flush code_size=11603976 nb_tbs=21059 avg_tb_size=365
qemu: flush code_size=23254872 nb_tbs=41243 avg_tb_size=377
qemu: flush code_size=28289496 nb_tbs=52057 avg_tb_size=358
qemu: flush code_size=43605160 nb_tbs=78896 avg_tb_size=367
qemu: flush code_size=45166552 nb_tbs=82158 avg_tb_size=364
qemu: flush code_size=63289640 nb_tbs=116494 avg_tb_size=358
qemu: flush code_size=51389960 nb_tbs=93937 avg_tb_size=362
qemu: flush code_size=59665928 nb_tbs=107063 avg_tb_size=372
qemu: flush code_size=38380824 nb_tbs=68597 avg_tb_size=374
qemu: flush code_size=44884568 nb_tbs=79901 avg_tb_size=376
qemu: flush code_size=50782632 nb_tbs=90681 avg_tb_size=374
qemu: flush code_size=39848888 nb_tbs=71433 avg_tb_size=372
qemu: flush code_size=64708840 nb_tbs=119052 avg_tb_size=359
qemu: flush code_size=49830008 nb_tbs=90992 avg_tb_size=362
qemu: flush code_size=68372408 nb_tbs=123442 avg_tb_size=368
qemu: flush code_size=33555560 nb_tbs=59514 avg_tb_size=378
qemu: flush code_size=44748344 nb_tbs=80974 avg_tb_size=367
qemu: flush code_size=37104248 nb_tbs=67609 avg_tb_size=364
That is, 20 flushes. Note how a static partitioning approach uses
the code buffer poorly, leading to many unnecessary flushes.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Groundwork for supporting multiple TCG contexts.
The core of this patch is this change to tcg/tcg.h:
> -extern TCGContext tcg_ctx;
> +extern TCGContext tcg_init_ctx;
> +extern TCGContext *tcg_ctx;
Note that for now we set *tcg_ctx to whatever TCGContext is passed
to tcg_context_init -- in this case &tcg_init_ctx.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Groundwork for supporting multiple TCG contexts.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The TARGET_MTIOCTOP/TARGET_MTIOCGET/TARGET_MTIOCPOS values
were being defined in terms of host struct types, but
these structures are such that their size might differ
on different hosts. Switch to using a target struct
definition instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This adds the -dfilter support to linux-user. There is a minor
checkpatch complaint about formatting which I've ignored for aesthetic
reasons.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
We were defining TARGET_FS_IOC_GETFLAGS and TARGET_FS_IOC_SETFLAGS
using the host 'long' type in the size field, which meant that
they had the wrong values if the host and guest had different
sized longs. Switch to abi_long instead.
This fixes a bug where these ioctls don't work on 32-bit guests
on 64-bit hosts (and makes the LTP test 'setxattr03' pass
where it did not previously.)
Reported-by: pgndev <pgnet.dev@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
We had a check using TARGET_VIRT_ADDR_SPACE_BITS to make sure
that the allocation coming in from the command-line option was
not too large, but that didn't include target-specific knowledge
about other restrictions on user-space.
Remove several target-specific hacks in linux-user/main.c.
For MIPS and Nios, we can replace them with proper adjustments
to the respective target's TARGET_VIRT_ADDR_SPACE_BITS definition.
For ARM, we had no existing ifdef but I suspect that the current
default value of 0xf7000000 was chosen with this in mind. Define
a workable value in linux-user/arm/, and also document why the
special case is required.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20170708025030.15845-3-rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The 32-bit ARM validate_guest_space() check tests whether the
specified -R value leaves enough space for us to put the
commpage in at 0xffff0f00. However it was incorrectly doing
a <= check for the check against (guest_base + guest_size),
which meant that it wasn't permitting the guest space to
butt right up against the commpage.
Fix the comparison, so that -R values all the way up to 0xffff0000
work correctly.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Since O_TMPFILE might differ between guest and host,
add it to the bitmask_transtbl. While at it, fix the definitions
of O_DIRECTORY etc which should arm32 according to kernel sources.
This fixes open14 and openat03 ltp testcases. Fixes:
https://bugs.launchpad.net/qemu/+bug/1709170
Almost every user of cpu_generic_init() checks for
returned NULL and then reports failure in a custom way
and aborts process.
Some users assume that call can't fail and don't check
for failure, though they should have checked for it.
In either cases cpu_generic_init() failure is fatal,
so instead of checking for failure and reporting
it various ways, make cpu_generic_init() report
errors in consistent way and terminate QEMU on failure.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1505318697-77161-3-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Make CPUSPARCState::def embedded so it would be allocated as part
of cpu instance and we won't have to worry about cleaning def pointer
up mannualy on cpu destruction.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1503592308-93913-4-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
These days, many programs are including a bug-reporting address,
or better yet, a link to the project web site, at the tail of
their --help output. However, we were not very consistent at
doing so: only qemu-nbd and qemu-qa mentioned anything, with the
latter pointing to an individual person instead of the project.
Add a new #define that sets up a uniform string, mentioning both
bug reporting instructions and overall project details, and which
a downstream vendor could tweak if they want bugs to go to a
downstream database. Then use it in all of our binaries which
have --help output.
The canned text intentionally references http:// instead of https://
because our https website currently causes certificate errors in
some browsers. That can be tweaked later once we have resolved the
web site issued.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170803163353.19558-5-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This reverts commit a59629fcc6.
This is not needed anymore because the IOThread mutex is not
"magic" anymore (need not kick the CPU thread)and also because
fork callbacks are only enabled at the very beginning of
QEMU's execution.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The only exception are groups of numers separated by symbols
'.', ' ', ':', '/', like 'ab.09.7d'.
This patch is made by the following:
> find . -name trace-events | xargs python script.py
where script.py is the following python script:
=========================
#!/usr/bin/env python
import sys
import re
import fileinput
rhex = '%[-+ *.0-9]*(?:[hljztL]|ll|hh)?(?:x|X|"\s*PRI[xX][^"]*"?)'
rgroup = re.compile('((?:' + rhex + '[.:/ ])+' + rhex + ')')
rbad = re.compile('(?<!0x)' + rhex)
files = sys.argv[1:]
for fname in files:
for line in fileinput.input(fname, inplace=True):
arr = re.split(rgroup, line)
for i in range(0, len(arr), 2):
arr[i] = re.sub(rbad, '0x\g<0>', arr[i])
sys.stdout.write(''.join(arr))
=========================
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20170731160135.12101-5-vsementsov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This reverts commit bc658e4a2e.
Some versions of gcc warn about this:
linux-user/syscall.c: In function ‘do_ioctl_rt’:
linux-user/syscall.c:5577:37: error: ‘host_rt_dev_ptr’ may be used uninitialized in this function [-Werror=uninitialized]
and in particular the Travis builds fail; they use
gcc (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3.
Revert the change to fix the travis builds.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With the move of some docs/ to docs/devel/ on ac06724a71,
no references were updated.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
linux-user/syscall.c:1627:35: warning: 1st function call argument is an uninitialized value
target_saddr->sa_family = tswap16(addr->sa_family);
^~~~~~~~~~~~~~~~~~~~~~~~
linux-user/syscall.c:1629:25: warning: The left operand of '==' is a garbage value
if (addr->sa_family == AF_NETLINK && len >= sizeof(struct sockaddr_nl)) {
~~~~~~~~~~~~~~~ ^
Reported-by: Clang Static Analyzer
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
not hit since 2009! :)
linux-user/elfload.c:1102:20: warning: Out of bound memory access (access exceeds upper limit of memory block)
(*regs[i]) = tswap32(env->gregs[i]);
~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~
Reported-by: Clang Static Analyzer
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
glibc used to have:
typedef struct ucontext { ... } ucontext_t;
glibc now has:
typedef struct ucontext_t { ... } ucontext_t;
(See https://sourceware.org/bugzilla/show_bug.cgi?id=21457
for detail and rationale for the glibc change)
However, QEMU used "struct ucontext" in declarations. This is a
private name and compatibility cannot be guaranteed. Switch to
only using the standardized type name.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Message-id: 20170628204452.41230-1-raj.khem@gmail.com
Cc: Kamil Rytarowski <kamil@netbsd.org>
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Laurent Vivier <laurent@vivier.eu>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[PMM: Rewrote commit message, based mostly on the one from
Nathaniel McCallum]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The flags are arranged such that we can manipulate them either
a whole, or as individual bytes. The computation within
cpu_get_tb_cpu_state is now reduced to a single load and mask.
Tested-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
If a signal is delivered during the execution of a delay slot,
or a gUSA region, clear those bits from the environment so that
the signal handler does not start in that same state.
Cleaning the bits on signal return is paranoid good sense.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <20170718200255.31647-10-rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
We translate gUSA regions atomically in a parallel context.
But in a serial context a gUSA region may be interrupted.
In that case, restart the region as the kernel would.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <20170718200255.31647-9-rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This was only used by the gdbstub and even then was only being set for
subsequent threads. Rather the continue duplicating the number just
make the gdbstub get the information from TaskState structure.
Now the tid is correctly reported for all threads the bug I was seeing
with "vCont;C04:0;c" packets is fixed as the correct tid is reported
to gdb.
I moved cpu_gdb_index into the gdbstub to facilitate easy access to
the TaskState which is used elsewhere in gdbstub.
To prevent BSD failing to build I've included ts_tid into its
TaskStruct but not populated it - which was the same state as the old
cpu->host_tid. I'll leave it up to the BSD maintainers to actually
populate this properly if they want a working gdbstub with
user-threads.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20170712105216.747-4-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The 32-bit PPC auxv is a bit complicated because in the
mists of time it used to be 16-aligned rather than directly
after the environment. Older glibc versions had code to
try to probe for whether it needed alignment or not:
https://sourceware.org/git/?p=glibc.git;a=blob;f=sysdeps/unix/sysv/linux/powerpc/dl-sysdep.c;hb=e84eabb3871c9b39e59323bf3f6b98c2ca9d1cd0
and the kernel has code which puts some magic entries at
the bottom to ensure that the alignment probe fails:
http://elixir.free-electrons.com/linux/latest/source/arch/powerpc/include/asm/elf.h#L158
QEMU has similar code too, but it was broken by commit
7c4ee5bcc8, which changed elfload.c from filling in
the auxv starting at the highest address and working down
to starting at the lowest address and working up. This
means that the ARCH_DLINFO hook must now be invoked first
rather than last, and the entries in it for PPC must
be reversed so that the magic AT_IGNOREPPC entries come
at the lowest address in the auxv as they should.
The effect of this was that if running a guest binary that
used an old glibc with the alignment probing the guest ld.so
code would segfault if the size of the guest environment and
argv happened to put the auxv at an address that triggered
the alignment code in the guest glibc.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Tested-by: Richard Henderson <rth@twiddle.net>
Message-id: 1498582198-6649-1-git-send-email-peter.maydell@linaro.org
This commit adds support for printing the content of the target_siginfo_t
structure in a similar way to how it is printed by the host strace. The
pointer to this structure is sent as the last argument of the
rt_sigqueueinfo() and rt_tgsigqueueinfo() system calls.
For this purpose, print_siginfo() is used and the get_target_siginfo()
function is implemented in order to get the information obtained from
the pointer into the form that print_siginfo() expects.
The get_target_siginfo() function is based on
host_to_target_siginfo_noswap() in linux-user mode, but here both
arguments are pointers to target_siginfo_t, so instead of converting
the information to siginfo_t it just extracts and copies it to a
target_siginfo_t structure.
Prior to this commit, typical strace output used to look like this:
8307 rt_sigqueueinfo(8307,50,0x00000040007ff6b0) = 0
After this commit, it looks like this:
8307 rt_sigqueueinfo(8307,50,{si_signo=50, si_code=SI_QUEUE, si_pid=8307,
si_uid=1000, si_sigval=17716762128}) = 0
Signed-off-by: Miloš Stojanović <Milos.Stojanovic@rt-rk.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This patch improves the consistentcy of the output from print_siginfo()
by removing spaces around the equal sign of si_pid, si_uid, si_timer1,
si_timer2, si_band, si_fd, si_addr, si_status and si_sigval. This way
they match si_signo and ci_code. Host strace was used as a reference
for this chage.
Prior to this commit, typical strace output used to look like this:
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Peter Maydell
James Cowgill
Emilio G. Cota
James Clarke
Helge Deller
Richard Henderson
Igor Mammedov
Alex Bennée
Marco A L Barbosa
Carlo Marcelo Arenas Belón
Laurent Vivier
Riku Voipio
Eric Blake
Paolo Bonzini
Vladimir Sementsov-Ogievskiy
Philippe Mathieu-Daudé
Khem Raj
Miloš Stojanović