The TCG emulation implements all the extensions described in the
RVA22U64 profile, both mandatory and optional. The mandatory extensions
will be enabled via the profile flag. We'll leave the optional
extensions to be enabled by hand.
Given that this is the first profile we're implementing in TCG we'll
need some ground work first:
- all profiles declared in riscv_profiles[] will be exposed to users.
TCG is the main accelerator we're considering when adding profile
support in QEMU, so for now it's safe to assume that all profiles in
riscv_profiles[] will be relevant to TCG;
- we'll not support user profile settings for vendor CPUs. The flags
will still be exposed but users won't be able to change them;
- profile support, albeit available for all non-vendor CPUs, will be
based on top of the new 'rv64i' CPU. Setting a profile to 'true' means
enable all mandatory extensions of this profile, setting it to 'false'
will disable all mandatory profile extensions of the CPU, which will
obliterate preset defaults. This is not a problem for a bare CPU like
rv64i but it can allow for silly scenarios when using other CPUs. E.g.
an user can do "-cpu rv64,rva22u64=false" and have a bunch of default
rv64 extensions disabled. The recommended way of using profiles is the
rv64i CPU, but users are free to experiment.
For now we'll handle multi-letter extensions only. MISA extensions need
additional steps that we'll take care later. At this point we can boot a
Linux buildroot using rva22u64 using the following options:
-cpu rv64i,rva22u64=true,sv39=true,g=true,c=true,s=true
Note that being an usermode/application profile we still need to
explicitly set 's=true' to enable Supervisor mode to boot Linux.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231218125334.37184-11-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
KVM does not have the means to support enabling the rva22u64 profile.
The main reasons are:
- we're missing support for some mandatory rva22u64 extensions in the
KVM module;
- we can't make promises about enabling a profile since it all depends
on host support in the end.
We'll revisit this decision in the future if needed. For now mark the
'rva22u64' profile as unavailable when running a KVM CPU:
$ qemu-system-riscv64 -machine virt,accel=kvm -cpu rv64,rva22u64=true
qemu-system-riscv64: can't apply global rv64-riscv-cpu.rva22u64=true:
'rva22u64' is not available with KVM
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20231218125334.37184-10-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The rva22U64 profile, described in:
https://github.com/riscv/riscv-profiles/blob/main/profiles.adoc#rva22-profiles
Contains a set of CPU extensions aimed for 64-bit userspace
applications. Enabling this set to be enabled via a single user flag
makes it convenient to enable a predictable set of features for the CPU,
giving users more predicability when running/testing their workloads.
QEMU implements all possible extensions of this profile. All the so
called 'synthetic extensions' described in the profile that are cache
related are ignored/assumed enabled (Za64rs, Zic64b, Ziccif, Ziccrse,
Ziccamoa, Zicclsm) since we do not implement a cache model.
An abstraction called RISCVCPUProfile is created to store the profile.
'ext_offsets' contains mandatory extensions that QEMU supports. Same
thing with the 'misa_ext' mask. Optional extensions must be enabled
manually in the command line if desired.
The design here is to use the common target/riscv/cpu.c file to store
the profile declaration and export it to the accelerator files. Each
accelerator is then responsible to expose it (or not) to users and how
to enable the extensions.
Next patches will implement the profile for TCG and KVM.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20231218125334.37184-9-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Named features (zic64b the sole example at this moment) aren't expose to
users, thus we need another way to expose them.
Go through each named feature, get its boolean value, do the needed
conversions (bool to qbool, qbool to QObject) and add it to output dict.
Another adjustment is needed: named features are evaluated during
finalize(), so riscv_cpu_finalize_features() needs to be mandatory
regardless of whether we have an input dict or not. Otherwise zic64b
will always return 'false', which is incorrect: the default values of
cache blocksizes ([cbom/cbop/cboz]_blocksize) are set to 64, satisfying
the conditions for zic64b.
Here's an API usage example after this patch:
$ ./build/qemu-system-riscv64 -S -M virt -display none
-qmp tcp:localhost:1234,server,wait=off
$ ./scripts/qmp/qmp-shell localhost:1234
Welcome to the QMP low-level shell!
Connected to QEMU 8.1.50
(QEMU) query-cpu-model-expansion type=full model={"name":"rv64"}
{"return": {"model":
{"name": "rv64", "props": {... "zic64b": true, ...}}}}
zic64b is set to 'true', as expected, since all cache sizes are 64
bytes by default.
If we change one of the cache blocksizes, zic64b is returned as 'false':
(QEMU) query-cpu-model-expansion type=full model={"name":"rv64","props":{"cbom_blocksize":128}}
{"return": {"model":
{"name": "rv64", "props": {... "zic64b": false, ...}}}}
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231218125334.37184-8-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
zic64b is defined in the RVA22U64 profile [1] as a named feature for
"Cache blocks must be 64 bytes in size, naturally aligned in the address
space". It's a fantasy name for 64 bytes cache blocks. The RVA22U64
profile mandates this feature, meaning that applications using this
profile expects 64 bytes cache blocks.
To make the upcoming RVA22U64 implementation complete, we'll zic64b as
a 'named feature', not a regular extension. This means that:
- it won't be exposed to users;
- it won't be written in riscv,isa.
This will be extended to other named extensions in the future, so we're
creating some common boilerplate for them as well.
zic64b is default to 'true' since we're already using 64 bytes blocks.
If any cache block size (cbo{m,p,z}_blocksize) is changed to something
different than 64, zic64b is set to 'false'.
Our profile implementation will then be able to check the current state
of zic64b and take the appropriate action (e.g. throw a warning).
[1] https://github.com/riscv/riscv-profiles/releases/download/v1.0/profiles.pdf
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231218125334.37184-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
QEMU already implements zicbom (Cache Block Management Operations) and
zicboz (Cache Block Zero Operations). Commit 59cb29d6a5 ("target/riscv:
add Zicbop cbo.prefetch{i, r, m} placeholder") added placeholders for
what would be the instructions for zicbop (Cache Block Prefetch
Operations), which are now no-ops.
The RVA22U64 profile mandates zicbop, which means that applications that
run with this profile might expect zicbop to be present in the riscv,isa
DT and might behave badly if it's absent.
Adding zicbop as an extension will make our future RVA22U64
implementation more in line with what userspace expects and, if/when
cache block prefetch operations became relevant to QEMU, we already have
the extension flag to turn then on/off as needed.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231218125334.37184-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We don't have any form of a 'bare bones' CPU. rv64, our default CPUs,
comes with a lot of defaults. This is fine for most regular uses but
it's not suitable when more control of what is actually loaded in the
CPU is required.
A bare-bones CPU would be annoying to deal with if not by profile
support, a way to load a multitude of extensions with a single flag.
Profile support is going to be implemented shortly, so let's add a CPU
for it.
The new 'rv64i' CPU will have only RVI loaded. It is inspired in the
profile specification that dictates, for RVA22U64 [1]:
"RVA22U64 Mandatory Base
RV64I is the mandatory base ISA for RVA22U64"
And so it seems that RV64I is the mandatory base ISA for all profiles
listed in [1], making it an ideal CPU to use with profile support.
rv64i is a CPU of type TYPE_RISCV_BARE_CPU. It has a mix of features
from pre-existent CPUs:
- it allows extensions to be enabled, like generic CPUs;
- it will not inherit extension defaults, like vendor CPUs.
This is the minimum extension set to boot OpenSBI and buildroot using
rv64i:
./build/qemu-system-riscv64 -nographic -M virt \
-cpu rv64i,sv39=true,g=true,c=true,s=true,u=true
Our minimal riscv,isa in this case will be:
# cat /proc/device-tree/cpus/cpu@0/riscv,isa
rv64imafdc_zicntr_zicsr_zifencei_zihpm_zca_zcd#
[1] https://github.com/riscv/riscv-profiles/blob/main/profiles.adoc
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231218125334.37184-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We'll add a new bare CPU type that won't have any default priv_ver. This
means that the CPU will default to priv_ver = 0, i.e. 1.10.0.
At the same we'll allow these CPUs to enable extensions at will, but
then, if the extension has a priv_ver newer than 1.10, we'll end up
disabling it. Users will then need to manually set priv_ver to something
other than 1.10 to enable the extensions they want, which is not ideal.
Change the setter() of extensions to allow user enabled extensions to
bump the priv_ver of the CPU. This will make it convenient for users to
enable extensions for CPUs that doesn't set a default priv_ver.
This change does not affect any existing CPU: vendor CPUs does not allow
extensions to be enabled, and generic CPUs are already set to priv_ver
LATEST.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231218125334.37184-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Our current logic in get/setters of MISA and multi-letter extensions
works because we have only 2 CPU types, generic and vendor, and by using
"!generic" we're implying that we're talking about vendor CPUs. When adding
a third CPU type this logic will break so let's handle it beforehand.
In set_misa_ext_cfg() and set_multi_ext_cfg(), check for "vendor" cpu instead
of "not generic". The "generic CPU" checks remaining are from
riscv_cpu_add_misa_properties() and cpu_add_multi_ext_prop() before
applying default values for the extensions.
This leaves us with:
- vendor CPUs will not allow extension enablement, all other CPUs will;
- generic CPUs will inherit default values for extensions, all others
won't.
And now we can add a new, third CPU type, that will allow extensions to
be enabled and will not inherit defaults, without changing the existing
logic.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231218125334.37184-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We want to add a new CPU type for bare CPUs that will inherit specific
traits of the 2 existing types:
- it will allow for extensions to be enabled/disabled, like generic
CPUs;
- it will NOT inherit defaults, like vendor CPUs.
We can make this conditions met by adding an explicit type for the
existing vendor CPUs and change the existing logic to not imply that
"not generic" means vendor CPUs.
Let's add the "vendor" CPU type first.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231218125334.37184-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Since QEMU v8.0.0 the RISC-V virt machine has a switch to disable ACPI
table generation. Add it to the documentation.
Fixes: 168b8c29ce ("hw/riscv/virt: Add a switch to disable ACPI")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231220193436.25909-1-heinrich.schuchardt@canonical.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20231207153842.32401-3-rbradford@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add support for amocas.w/d/q instructions which are part of the ratified
Zacas extension: https://github.com/riscv/riscv-zacas
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20231207153842.32401-2-rbradford@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The interrupts-extended property of PLIC only has 2 * hart number
fields when KVM enabled, copy 4 * hart number fields to fdt will
expose some uninitialized value.
In this patch, I also refactor the code about the setting of
interrupts-extended property of PLIC for improved readability.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20231218090543.22353-1-yongxuan.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add PLIC structures for each socket in the MADT when system is
configured with PLIC as the external interrupt controller.
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20231218150247.466427-14-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add basic IO controllers and devices like PCI, VirtIO and UART in the
ACPI namespace.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20231218150247.466427-13-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Update the GPEX host bridge properties related to MMIO ranges with
values set for the virt machine.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20231218150247.466427-12-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
ACPI DSDT generator needs information like ECAM range, PIO range, 32-bit
and 64-bit PCI MMIO range etc related to the PCI host bridge. Instead of
making these values machine specific, create properties for the GPEX
host bridge with default value 0. During initialization, the firmware
can initialize these properties with correct values for the platform.
This basically allows DSDT generator code independent of the machine
specific memory map accesses.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20231218150247.466427-11-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
MMU type information is available via MMU node in RHCT. Add this node in
RHCT.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20231218150247.466427-10-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When CMO related extensions like Zicboz, Zicbom and Zicbop are enabled, the
block size for those extensions need to be communicated via CMO node in
RHCT. Add CMO node in RHCT if any of those CMO extensions are detected.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20231218150247.466427-9-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add APLIC structures for each socket in the MADT when system is configured
with APLIC as the external wired interrupt controller.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20231218150247.466427-8-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add IMSIC structure in MADT when IMSIC is configured.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20231218150247.466427-7-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Update the RINTC structure in MADT with AIA related fields.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20231218150247.466427-6-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Some macros and static function related to IMSIC are defined in virt.c.
They are required in virt-acpi-build.c. So, make them public.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20231218150247.466427-5-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
With common function to add virtio in DSDT created now, update microvm
code also to use it instead of duplicate code.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20231218150247.466427-4-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
RISC-V also needs to create the virtio in DSDT in the same way as ARM.
So, instead of duplicating the code, move this function to the device
specific file which is common across architectures.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20231218150247.466427-3-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
RISC-V also needs to use the same code to create fw_cfg in DSDT. So,
avoid code duplication by moving the code in arm and riscv to a device
specific file.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20231218150247.466427-2-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
kvm_riscv_reg_id() returns an id encoded with an ulong size, i.e. an u32
size when running TARGET_RISCV32 and u64 when running TARGET_RISCV64.
Rename it to kvm_riscv_reg_id_ulong() to enhance code readability. It'll
be in line with the existing kvm_riscv_reg_id_<size>() helpers.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20231208183835.2411523-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Create a RISCV_CONFIG_REG() macro, similar to what other regs use, to
hide away some of the boilerplate.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20231208183835.2411523-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
KVM_REG_RISCV_TIMER regs are always u64 according to the KVM API, but at
this moment we'll return u32 regs if we're running a RISCV32 target.
Use the kvm_riscv_reg_id_u64() helper in RISCV_TIMER_REG() to fix it.
Reported-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20231208183835.2411523-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
KVM_REG_RISCV_FP_D regs are always u64 size. Using kvm_riscv_reg_id() in
RISCV_FP_D_REG() ends up encoding the wrong size if we're running with
TARGET_RISCV32.
Create a new helper that returns a KVM ID with u64 size and use it with
RISCV_FP_D_REG().
Reported-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20231208183835.2411523-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
KVM_REG_RISCV_FP_F regs have u32 size according to the API, but by using
kvm_riscv_reg_id() in RISCV_FP_F_REG() we're returning u64 sizes when
running with TARGET_RISCV64. The most likely reason why no one noticed
this is because we're not implementing kvm_cpu_synchronize_state() in
RISC-V yet.
Create a new helper that returns a KVM ID with u32 size and use it in
RISCV_FP_F_REG().
Reported-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20231208183835.2411523-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
mvendorid is an uint32 property, mimpid/marchid are uint64 properties.
But their getters are returning bools. The reason this went under the
radar for this long is because we have no code using the getters.
The problem can be seem via the 'qom-get' API though. Launching QEMU
with the 'veyron-v1' CPU, a model with:
VEYRON_V1_MVENDORID: 0x61f (1567)
VEYRON_V1_MIMPID: 0x111 (273)
VEYRON_V1_MARCHID: 0x8000000000010000 (9223372036854841344)
This is what the API returns when retrieving these properties:
(qemu) qom-get /machine/soc0/harts[0] mvendorid
true
(qemu) qom-get /machine/soc0/harts[0] mimpid
true
(qemu) qom-get /machine/soc0/harts[0] marchid
true
After this patch:
(qemu) qom-get /machine/soc0/harts[0] mvendorid
1567
(qemu) qom-get /machine/soc0/harts[0] mimpid
273
(qemu) qom-get /machine/soc0/harts[0] marchid
9223372036854841344
Fixes: 1e34150045 ("target/riscv/cpu.c: restrict 'mvendorid' value")
Fixes: a1863ad368 ("target/riscv/cpu.c: restrict 'mimpid' value")
Fixes: d6a427e2c0 ("target/riscv/cpu.c: restrict 'marchid' value")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231211170732.2541368-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The Sv32 page-based virtual-memory scheme described in RISCV privileged
spec Section 5.3 supports 34-bit physical addresses for RV32, so the
PMP scheme must support addresses wider than XLEN for RV32. However,
PMP address register format is still 32 bit wide.
Signed-off-by: Ivan Klokov <ivan.klokov@syntacore.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231123091214.20312-1-ivan.klokov@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
If CPU does not implement the Vector extension, it usually means
mstatus vs hardwire to zero. So we should not allow write a
non-zero value to this field.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231215023313.1708-1-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
According to the specification, the th.dcache.cvall1 can be executed
under all priviledges.
The specification about xtheadcmo located in,
https://github.com/T-head-Semi/thead-extension-spec/blob/master/xtheadcmo/dcache_cval1.adoc
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Christoph Muellner <christoph.muellner@vrull.eu>
Message-ID: <20231208094315.177-1-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The RISC-V v spec 16.6 section says that the whole vector register move
instructions operate as if EEW=SEW. So it should depends on the vsew
field of vtype register.
Signed-off-by: Max Chou <max.chou@sifive.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20231129170400.21251-3-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The ratified version of RISC-V V spec section 16.6 says that
`The instructions operate as if EEW=SEW`.
So the whole vector register move instructions depend on the vtype
register that means the whole vector register move instructions should
raise an illegal-instruction exception when vtype.vill=1.
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20231129170400.21251-2-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
To be able to peek at FIFO content without popping it,
introduce the fifo8_peek_buf() method by factoring
common content from fifo8_pop_buf().
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231109192814.95977-3-philmd@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
There might be cases where we know the number of bytes we can
pop from the FIFO, or we simply don't care how many bytes is
returned. Allow fifo8_pop_buf() to take a NULL numptr.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231109192814.95977-2-philmd@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Enable FEAT_NV2 on the 'max' CPU, and stop filtering it out for
the Neoverse N2 and Neoverse V1 CPUs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
We already print various lines of information when we take an
exception, including the ELR and (if relevant) the FAR. Now
that FEAT_NV means that we might report something other than
the old PSTATE to the guest as the SPSR, it's worth logging
this as well.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
When interpreting CPU dumps where FEAT_NV and FEAT_NV2 are in use,
it's helpful to include the values of HCR_EL2.{NV,NV1,NV2} in the CPU
dump format, as a way of distinguishing when we are in EL1 as part of
executing guest-EL2 and when we are just in normal EL1.
Add the bits to the end of the log line that shows PSTATE and similar
information:
PSTATE=000003c9 ---- EL2h BTYPE=0 NV NV2
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Mark up the cpreginfo structs for the GIC CPU registers to indicate
the offsets from VNCR_EL2, as defined in table D8-66 in rule R_CSRPQ
in the Arm ARM.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Mark up the cpreginfo structs to indicate offsets for system
registers from VNCR_EL2, as defined in table D8-66 in rule R_CSRPQ in
the Arm ARM. This covers all the remaining offsets at 0x200 and
above, except for the GIC ICH_* registers.
(Note that because we don't implement FEAT_SPE, FEAT_TRF,
FEAT_MPAM, FEAT_BRBE or FEAT_AMUv1p1 we don't implement any
of the registers that use offsets at 0x800 and above.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Mark up the cpreginfo structs to indicate offsets for system
registers from VNCR_EL2, as defined in table D8-66 in rule R_CSRPQ in
the Arm ARM. This commit covers offsets 0x168 to 0x1f8.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Mark up the cpreginfo structs to indicate offsets for system
registers from VNCR_EL2, as defined in table D8-66 in rule R_CSRPQ in
the Arm ARM. This commit covers offsets 0x100 to 0x160.
Many (but not all) of the registers in this range have _EL12 aliases,
and the slot in memory is shared between the _EL12 version of the
register and the _EL1 version. Where we programmatically generate
the regdef for the _EL12 register, arrange that its
nv2_redirect_offset is set up correctly to do this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Mark up the cpreginfo structs to indicate offsets for system
registers from VNCR_EL2, as defined in table D8-66 in rule R_CSRPQ in
the Arm ARM. This commit covers offsets below 0x100; all of these
registers are redirected to memory regardless of the value of
HCR_EL2.NV1.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
If FEAT_NV2 redirects a system register access to a memory offset
from VNCR_EL2, that access might fault. In this case we need to
report the correct syndrome information:
* Data Abort, from same-EL
* no ISS information
* the VNCR bit (bit 13) is set
and the exception must be taken to EL2.
Save an appropriate syndrome template when generating code; we can
then use that to:
* select the right target EL
* reconstitute a correct final syndrome for the data abort
* report the right syndrome if we take a FEAT_RME granule protection
fault on the VNCR-based write
Note that because VNCR is bit 13, we must start keeping bit 13 in
template syndromes, by adjusting ARM_INSN_START_WORD2_SHIFT.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
FEAT_NV2 requires that when HCR_EL2.{NV,NV2} == 0b11 then accesses by
EL1 to certain system registers are redirected to RAM. The full list
of affected registers is in the table in rule R_CSRPQ in the Arm ARM.
The registers may be normally accessible at EL1 (like ACTLR_EL1), or
normally UNDEF at EL1 (like HCR_EL2). Some registers redirect to RAM
only when HCR_EL2.NV1 is 0, and some only when HCR_EL2.NV1 is 1;
others trap in both cases.
Add the infrastructure for identifying which registers should be
redirected and turning them into memory accesses.
This code does not set the correct syndrome or arrange for the
exception to be taken to the correct target EL if the access via
VNCR_EL2 faults; we will do that in the next commit.
Subsequent commits will mark up the relevant regdefs to set their
nv2_redirect_offset, and if relevant one of the two flags which
indicates that the redirect happens only for a particular value of
HCR_EL2.NV1.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
