Commit Graph

179 Commits

Author SHA1 Message Date
Andrey Shinkevich b8968c875f qcow2: Add list of bitmaps to ImageInfoSpecificQCow2
In the 'Format specific information' section of the 'qemu-img info'
command output, the supplemental information about existing QCOW2
bitmaps will be shown, such as a bitmap name, flags and granularity:

image: /vz/vmprivate/VM1/harddisk.hdd
file format: qcow2
virtual size: 64G (68719476736 bytes)
disk size: 3.0M
cluster_size: 1048576
Format specific information:
    compat: 1.1
    lazy refcounts: true
    bitmaps:
        [0]:
            flags:
                [0]: in-use
                [1]: auto
            name: back-up1
            granularity: 65536
        [1]:
            flags:
                [0]: in-use
                [1]: auto
            name: back-up2
            granularity: 65536
    refcount bits: 16
    corrupt: false

Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <1549638368-530182-3-git-send-email-andrey.shinkevich@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2019-02-11 14:35:43 -06:00
Markus Armbruster 14632122b8 block: Eliminate the S_1KiB, S_2KiB, ... macros
We define 54 macros for the powers of two >= 1024.  We use six, in six
macro definitions.  Four of them could just as well use the common MiB
macro, so do that.  The remaining two can't, because they get passed
to stringify.  Replace the macro by the literal number there.
Slightly harder to read in one instance (1048576 vs. S_1MiB), so add a
comment there.  The other instance is a wash: 65536 vs S_64KiB.  65536
has been good enough for more than seven years there.

This effectively reverts commit 540b849261 and 1240ac558d.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-02-01 13:46:45 +01:00
Paolo Bonzini b58deb344d qemu/queue.h: leave head structs anonymous unless necessary
Most list head structs need not be given a name.  In most cases the
name is given just in case one is going to use QTAILQ_LAST, QTAILQ_PREV
or reverse iteration, but this does not apply to lists of other kinds,
and even for QTAILQ in practice this is only rarely needed.  In addition,
we will soon reimplement those macros completely so that they do not
need a name for the head struct.  So clean up everything, not giving a
name except in the rare case where it is necessary.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-11 15:46:55 +01:00
Vladimir Sementsov-Ogievskiy c3c10f7295 qcow2: aio support for compressed cluster read
Allocate buffers locally and release qcow2 lock. Than, reads inside
qcow2_co_preadv_compressed may be done in parallel, however all
decompression is still done synchronously. Let's improve it in the
following commit.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-12-14 11:52:41 +01:00
Eric Blake 77d6a21558 qcow2: Don't allow overflow during cluster allocation
Our code was already checking that we did not attempt to
allocate more clusters than what would fit in an INT64 (the
physical maximimum if we can access a full off_t's worth of
data).  But this does not catch smaller limits enforced by
various spots in the qcow2 image description: L1 and normal
clusters of L2 are documented as having bits 63-56 reserved
for other purposes, capping our maximum offset at 64PB (bit
55 is the maximum bit set).  And for compressed images with
2M clusters, the cap drops the maximum offset to bit 48, or
a maximum offset of 512TB.  If we overflow that offset, we
would write compressed data into one place, but try to
decompress from another, which won't work.

It's actually possible to prove that overflow can cause image
corruption without this patch; I'll add the iotests separately
in the next commit.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-11-19 12:51:40 +01:00
Vladimir Sementsov-Ogievskiy 2ea427efff bloc/qcow2: drop dirty_bitmaps_loaded state variable
This variable doesn't work as it should, because it is actually cleared
in qcow2_co_invalidate_cache() by memset(). Drop it, as the following
patch will introduce new behavior.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
2018-10-29 16:23:15 -04:00
Leonid Bloch e957b50b8d qcow2: Set the default cache-clean-interval to 10 minutes
The default cache-clean-interval is set to 10 minutes, in order to lower
the overhead of the qcow2 caches (before the default was 0, i.e.
disabled).

* For non-Linux platforms the default is kept at 0, because
  cache-clean-interval is not supported there yet.

Signed-off-by: Leonid Bloch <lbloch@janustech.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-10-01 12:51:12 +02:00
Leonid Bloch 80668d0fb7 qcow2: Increase the default upper limit on the L2 cache size
The upper limit on the L2 cache size is increased from 1 MB to 32 MB
on Linux platforms, and to 8 MB on other platforms (this difference is
caused by the ability to set intervals for cache cleaning on Linux
platforms only).

This is done in order to allow default full coverage with the L2 cache
for images of up to 256 GB in size (was 8 GB). Note, that only the
needed amount to cover the full image is allocated. The value which is
changed here is just the upper limit on the L2 cache size, beyond which
it will not grow, even if the size of the image will require it to.

Signed-off-by: Leonid Bloch <lbloch@janustech.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-10-01 12:51:12 +02:00
Leonid Bloch b749562d98 qcow2: Assign the L2 cache relatively to the image size
Sufficient L2 cache can noticeably improve the performance when using
large images with frequent I/O.

Previously, unless 'cache-size' was specified and was large enough, the
L2 cache was set to a certain size without taking the virtual image size
into account.

Now, the L2 cache assignment is aware of the virtual size of the image,
and will cover the entire image, unless the cache size needed for that is
larger than a certain maximum. This maximum is set to 1 MB by default
(enough to cover an 8 GB image with the default cluster size) but can
be increased or decreased using the 'l2-cache-size' option. This option
was previously documented as the *maximum* L2 cache size, and this patch
makes it behave as such, instead of as a constant size. Also, the
existing option 'cache-size' can limit the sum of both L2 and refcount
caches, as previously.

Signed-off-by: Leonid Bloch <lbloch@janustech.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-10-01 12:51:12 +02:00
Leonid Bloch b6a95c6d10 qcow2: Make sizes more humanly readable
Signed-off-by: Leonid Bloch <lbloch@janustech.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-10-01 12:51:12 +02:00
Vladimir Sementsov-Ogievskiy 0e4e4318ea qcow2: add overlap check for bitmap directory
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20180705151515.779173-1-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-07-09 19:43:24 +02:00
Vladimir Sementsov-Ogievskiy ceb029cd6f qcow2: add compress threads
Do data compression in separate threads. This significantly improve
performance for qemu-img convert with -W (allow async writes) and -c
(compressed) options.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-07-05 10:29:19 +02:00
Kevin Wolf 8b24cd1415 qcow2: Free allocated clusters on write error
If we managed to allocate the clusters, but then failed to write the
data, there's a good chance that we'll still be able to free the
clusters again in order to avoid cluster leaks (the refcounts are
cached, so even if we can't write them out right now, we may be able to
do so when the VM is resumed after a werror=stop/enospc pause).

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
2018-06-29 14:20:56 +02:00
Alberto Garcia 52253998ec qcow2: Give the refcount cache the minimum possible size by default
The L2 and refcount caches have default sizes that can be overridden
using the l2-cache-size and refcount-cache-size (an additional
parameter named cache-size sets the combined size of both caches).

Unless forced by one of the aforementioned parameters, QEMU will set
the unspecified sizes so that the L2 cache is 4 times larger than the
refcount cache.

This is based on the premise that the refcount metadata needs to be
only a fourth of the L2 metadata to cover the same amount of disk
space. This is incorrect for two reasons:

 a) The amount of disk covered by an L2 table depends solely on the
    cluster size, but in the case of a refcount block it depends on
    the cluster size *and* the width of each refcount entry.
    The 4/1 ratio is only valid with 16-bit entries (the default).

 b) When we talk about disk space and L2 tables we are talking about
    guest space (L2 tables map guest clusters to host clusters),
    whereas refcount blocks are used for host clusters (including
    L1/L2 tables and the refcount blocks themselves). On a fully
    populated (and uncompressed) qcow2 file, image size > virtual size
    so there are more refcount entries than L2 entries.

Problem (a) could be fixed by adjusting the algorithm to take into
account the refcount entry width. Problem (b) could be fixed by
increasing a bit the refcount cache size to account for the clusters
used for qcow2 metadata.

However this patch takes a completely different approach and instead
of keeping a ratio between both cache sizes it assigns as much as
possible to the L2 cache and the remainder to the refcount cache.

The reason is that L2 tables are used for every single I/O request
from the guest and the effect of increasing the cache is significant
and clearly measurable. Refcount blocks are however only used for
cluster allocation and internal snapshots and in practice are accessed
sequentially in most cases, so the effect of increasing the cache is
negligible (even when doing random writes from the guest).

So, make the refcount cache as small as possible unless the user
explicitly asks for a larger one.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 9695182c2eb11b77cb319689a1ebaa4e7c9d6591.1523968389.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-05-15 16:15:21 +02:00
Vladimir Sementsov-Ogievskiy 605bc8be42 qcow2: try load bitmaps only once
Checking reopen by existence of some bitmaps is wrong, as it may be
some other bitmaps, or on the other hand, user may remove bitmaps. This
criteria is bad. To simplify things and make behavior more predictable
let's just add a flag to remember, that we've already tried to load
bitmaps on open and do not want do it again.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20180411122606.367301-2-vsementsov@virtuozzo.com
[mreitz: Changed comment wording according to Eric Blake's suggestion]
Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-04-16 13:35:32 +02:00
Vladimir Sementsov-Ogievskiy b1336cc2ec qcow2-bitmap: add qcow2_reopen_bitmaps_rw_hint()
Add version of qcow2_reopen_bitmaps_rw, which do the same work but
also return a hint about was header updated or not. This will be
used in the following fix for bitmaps reloading after migration.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180320170521.32152-2-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-03-26 21:17:24 +02:00
Alberto Garcia 0cf0e5980b qcow2: Generalize validate_table_offset() into qcow2_validate_table()
This function checks that the offset and size of a table are valid.

While the offset checks are fine, the size check is too generic, since
it only verifies that the total size in bytes fits in a 64-bit
integer. In practice all tables used in qcow2 have much smaller size
limits, so the size needs to be checked again for each table using its
actual limit.

This patch generalizes this function by allowing the caller to specify
the maximum size for that table. In addition to that it allows passing
an Error variable.

The function is also renamed and made public since we're going to use
it in other parts of the code.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-03-09 15:17:47 +01:00
Paolo Bonzini 8b220eb7c8 qcow2: introduce qcow2_write_caches and qcow2_flush_caches
They will be used to avoid recursively taking s->lock during
bdrv_open or bdrv_check.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1516279431-30424-7-git-send-email-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-03-09 15:17:47 +01:00
Alberto Garcia 9e029689e1 qcow2: Replace align_offset() with ROUND_UP()
The align_offset() function is equivalent to the ROUND_UP() macro so
there's no need to use the former. The ROUND_UP() name is also a bit
more explicit.

This patch uses ROUND_UP() instead of the slower QEMU_ALIGN_UP()
because align_offset() already requires that the second parameter is a
power of two.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180215131008.5153-1-berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-03-02 18:39:56 +01:00
Alberto Garcia 1221fe6f63 qcow2: Allow configuring the L2 slice size
Now that the code is ready to handle L2 slices we can finally add an
option to allow configuring their size.

An L2 slice is the portion of an L2 table that is read by the qcow2
cache. Until now the cache was always reading full L2 tables, and
since the L2 table size is equal to the cluster size this was not very
efficient with large clusters. Here's a more detailed explanation of
why it makes sense to have smaller cache entries in order to load L2
data:

   https://lists.gnu.org/archive/html/qemu-block/2017-09/msg00635.html

This patch introduces a new command-line option to the qcow2 driver
named l2-cache-entry-size (cf. l2-cache-size). The cache entry size
has the same restrictions as the cluster size: it must be a power of
two and it has the same range of allowed values, with the additional
requirement that it must not be larger than the cluster size.

The L2 cache entry size (L2 slice size) remains equal to the cluster
size for now by default, so this feature must be explicitly enabled.
Although my tests show that 4KB slices consistently improve
performance and give the best results, let's wait and make more tests
with different cluster sizes before deciding on an optimal default.

Now that the cache entry size is not necessarily equal to the cluster
size we need to reflect that in the MIN_L2_CACHE_SIZE documentation.
That minimum value is a requirement of the COW algorithm: we need to
read two L2 slices (and not two L2 tables) in order to do COW, see
l2_allocate() for the actual code.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: c73e5611ff4a9ec5d20de68a6c289553a13d2354.1517840877.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-02-13 17:00:00 +01:00
Alberto Garcia 8f81817577 qcow2: Add offset_to_l2_slice_index()
Similar to offset_to_l2_index(), this function takes a guest offset
and returns the index in the L2 slice that contains its L2 entry.

An L2 slice has currently the same size as an L2 table (one cluster),
so both functions return the same value for now.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: a1c45c5c5a76146dd1712d8d1e7b409ad539c718.1517840877.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-02-13 16:59:59 +01:00
Alberto Garcia 3c2e511a24 qcow2: Add l2_slice_size field to BDRVQcow2State
The BDRVQcow2State structure contains an l2_size field, which stores
the number of 64-bit entries in an L2 table.

For efficiency reasons we want to be able to load slices instead of
full L2 tables, so we need to know how many entries an L2 slice can
hold.

An L2 slice is the portion of an L2 table that is loaded by the qcow2
cache. At the moment that cache can only load complete tables,
therefore an L2 slice has the same size as an L2 table (one cluster)
and l2_size == l2_slice_size.

Later we'll allow smaller slices, but until then we have to use this
new l2_slice_size field to make the rest of the code ready for that.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: adb048595f9fb5dfb110c802a8b3c3be3b937f37.1517840877.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-02-13 16:59:59 +01:00
Alberto Garcia 05b5b6ee54 qcow2: Add offset_to_l1_index()
Similar to offset_to_l2_index(), this function returns the index in
the L1 table for a given guest offset. This is only used in a couple
of places and it's not a particularly complex calculation, but it
makes the code a bit more readable.

Although in the qcow2_get_cluster_offset() case the old code was
taking advantage of the l1_bits variable, we're going to get rid of
the other uses of l1_bits in a later patch anyway, so it doesn't make
sense to keep it just for this.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: a5f626fed526b7459a0425fad06d823d18df8522.1517840877.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-02-13 16:59:59 +01:00
Alberto Garcia 6e6fa7605e qcow2: Remove BDS parameter from qcow2_cache_is_table_offset()
This function was only using the BlockDriverState parameter to pass it
to qcow2_cache_get_table_addr(). This is no longer necessary so this
parameter can be removed.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: eb0ed90affcf302e5a954bafb5931b5215483d3a.1517840877.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-02-13 16:59:59 +01:00
Alberto Garcia 77aadd7bed qcow2: Remove BDS parameter from qcow2_cache_discard()
This function was only using the BlockDriverState parameter to pass it
to qcow2_cache_get_table_idx() and qcow2_cache_table_release(). This
is no longer necessary so this parameter can be removed.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 9724f7e38e763ad3be32627c6b7fe8df9edb1476.1517840877.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-02-13 16:59:59 +01:00
Alberto Garcia b2f68bffab qcow2: Remove BDS parameter from qcow2_cache_clean_unused()
This function was only using the BlockDriverState parameter to pass it
to qcow2_cache_table_release(). This is no longer necessary so this
parameter can be removed.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: b74f17591af52f201de0ea3a3b2dd0a81932334d.1517840876.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-02-13 16:59:59 +01:00
Alberto Garcia e64d4072d1 qcow2: Remove BDS parameter from qcow2_cache_destroy()
This function was never using the BlockDriverState parameter so it can
be safely removed.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 49c74fe8b3aead9056e61a85b145ce787d06262b.1517840876.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-02-13 16:59:59 +01:00
Alberto Garcia 2013c3d44d qcow2: Remove BDS parameter from qcow2_cache_put()
This function was only using the BlockDriverState parameter to pass it
to qcow2_cache_get_table_idx(). This is no longer necessary so this
parameter can be removed.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 6f98155489054a457563da77cdad1a66ebb3e896.1517840876.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-02-13 16:59:59 +01:00
Alberto Garcia 2d135ee92d qcow2: Remove BDS parameter from qcow2_cache_entry_mark_dirty()
This function was only using the BlockDriverState parameter to pass it
to qcow2_cache_get_table_idx(). This is no longer necessary so this
parameter can be removed.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 5c40516a91782b083c1428b7b6a41bb9e2679bfb.1517840876.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-02-13 16:59:59 +01:00
Vladimir Sementsov-Ogievskiy 3e99da5e76 block: maintain persistent disabled bitmaps
To maintain load/store disabled bitmap there is new approach:

 - deprecate @autoload flag of block-dirty-bitmap-add, make it ignored
 - store enabled bitmaps as "auto" to qcow2
 - store disabled bitmaps without "auto" flag to qcow2
 - on qcow2 open load "auto" bitmaps as enabled and others
   as disabled (except in_use bitmaps)

Also, adjust iotests 165 and 176 appropriately.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20180202160752.143796-1-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-02-13 16:59:58 +01:00
Edgar Kaziakhmedov 546a7dc40e qcow2: get rid of qcow2_backing_read1 routine
Since bdrv_co_preadv does all neccessary checks including
reading after the end of the backing file, avoid duplication
of verification before bdrv_co_preadv call.

Signed-off-by: Edgar Kaziakhmedov <edgar.kaziakhmedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-12-22 15:03:41 +01:00
Max Reitz 23482f8a60 qcow2: Add bounds check to get_refblock_offset()
Reported-by: R. Nageswara Sastry <nasastry@in.ibm.com>
Buglink: https://bugs.launchpad.net/qemu/+bug/1728661
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171110203111.7666-5-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-11-17 18:21:31 +01:00
Pavel Butsykin 163bc39d2c qcow2: truncate the tail of the image file after shrinking the image
Now after shrinking the image, at the end of the image file, there might be a
tail that probably will never be used. So we can find the last used cluster and
cut the tail.

Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170929121613.25997-3-pbutsykin@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-10-06 16:30:48 +02:00
Pavel Butsykin 46b732cdf3 qcow2: add shrink image support
This patch add shrinking of the image file for qcow2. As a result, this allows
us to reduce the virtual image size and free up space on the disk without
copying the image. Image can be fragmented and shrink is done by punching holes
in the image file.

Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170918124230.8152-4-pbutsykin@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-09-26 15:00:32 +02:00
Pavel Butsykin f71c08ea8e qcow2: add qcow2_cache_discard
Whenever l2/refcount table clusters are discarded from the file we can
automatically drop unnecessary content of the cache tables. This reduces
the chance of eviction useful cache data and eliminates inconsistent data
in the cache with the data in the file.

Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170918124230.8152-3-pbutsykin@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-09-26 15:00:32 +02:00
Max Reitz 772d1f973f block/qcow2: falloc/full preallocating growth
Implement the preallocation modes falloc and full for growing qcow2
images.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170613202107.10125-15-mreitz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11 17:45:02 +02:00
Max Reitz 12cc30a8cb block/qcow2: Add qcow2_refcount_area()
This function creates a collection of self-describing refcount
structures (including a new refcount table) at the end of a qcow2 image
file. Optionally, these structures can also describe a number of
additional clusters beyond themselves; this will be important for
preallocated truncation, which will place the data clusters and L2
tables there.

For now, we can use this function to replace the part of
alloc_refcount_block() that grows the refcount table (from which it is
actually derived).

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-13-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11 17:45:02 +02:00
Vladimir Sementsov-Ogievskiy 469c71edc7 qcow2: add .bdrv_remove_persistent_dirty_bitmap
Realize .bdrv_remove_persistent_dirty_bitmap interface.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-29-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11 17:44:59 +02:00
Vladimir Sementsov-Ogievskiy da0eb242ad qcow2: add .bdrv_can_store_new_dirty_bitmap
Realize .bdrv_can_store_new_dirty_bitmap interface.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170628120530.31251-23-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11 17:44:59 +02:00
Vladimir Sementsov-Ogievskiy 169b879359 qcow2: store bitmaps on reopening image as read-only
Store bitmaps and mark them read-only on reopening image as read-only.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170628120530.31251-21-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11 17:44:58 +02:00
Vladimir Sementsov-Ogievskiy 5f72826e7f qcow2: add persistent dirty bitmaps support
Store persistent dirty bitmaps in qcow2 image.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170628120530.31251-20-vsementsov@virtuozzo.com
[mreitz: Always assign ret in store_bitmap() in case of an error]
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11 17:44:58 +02:00
Vladimir Sementsov-Ogievskiy 1b6b0562db qcow2: support .bdrv_reopen_bitmaps_rw
Realize bdrv_reopen_bitmaps_rw interface.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170628120530.31251-15-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11 17:44:58 +02:00
Vladimir Sementsov-Ogievskiy d1258dd0c8 qcow2: autoloading dirty bitmaps
Auto loading bitmaps are bitmaps in Qcow2, with the AUTO flag set. They
are loaded when the image is opened and become BdrvDirtyBitmaps for the
corresponding drive.

Extra data in bitmaps is not supported for now.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-12-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11 17:44:58 +02:00
Vladimir Sementsov-Ogievskiy 88ddffae8f qcow2: add bitmaps extension
Add bitmap extension as specified in docs/specs/qcow2.txt.
For now, just mirror extension header into Qcow2 state and check
constraints. Also, calculate refcounts for qcow2 bitmaps, to not break
qemu-img check.

For now, disable image resize if it has bitmaps. It will be fixed later.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-9-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11 17:44:57 +02:00
Vladimir Sementsov-Ogievskiy 8a5bb1f114 qcow2-refcount: rename inc_refcounts() and make it public
This is needed for the following patch, which will introduce refcounts
checking for qcow2 bitmaps.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-8-vsementsov@virtuozzo.com
[mreitz: s/inc_refcounts/qcow2_inc_refcounts_imrt/ in one more (new)
         place]
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11 17:44:57 +02:00
Daniel P. Berrange 4652b8f3e1 qcow2: add support for LUKS encryption format
This adds support for using LUKS as an encryption format
with the qcow2 file, using the new encrypt.format parameter
to request "luks" format. e.g.

  # qemu-img create --object secret,data=123456,id=sec0 \
       -f qcow2 -o encrypt.format=luks,encrypt.key-secret=sec0 \
       test.qcow2 10G

The legacy "encryption=on" parameter still results in
creation of the old qcow2 AES format (and is equivalent
to the new 'encryption-format=aes'). e.g. the following are
equivalent:

  # qemu-img create --object secret,data=123456,id=sec0 \
       -f qcow2 -o encryption=on,encrypt.key-secret=sec0 \
       test.qcow2 10G

 # qemu-img create --object secret,data=123456,id=sec0 \
       -f qcow2 -o encryption-format=aes,encrypt.key-secret=sec0 \
       test.qcow2 10G

With the LUKS format it is necessary to store the LUKS
partition header and key material in the QCow2 file. This
data can be many MB in size, so cannot go into the QCow2
header region directly. Thus the spec defines a FDE
(Full Disk Encryption) header extension that specifies
the offset of a set of clusters to hold the FDE headers,
as well as the length of that region. The LUKS header is
thus stored in these extra allocated clusters before the
main image payload.

Aside from all the cryptographic differences implied by
use of the LUKS format, there is one further key difference
between the use of legacy AES and LUKS encryption in qcow2.
For LUKS, the initialiazation vectors are generated using
the host physical sector as the input, rather than the
guest virtual sector. This guarantees unique initialization
vectors for all sectors when qcow2 internal snapshots are
used, thus giving stronger protection against watermarking
attacks.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-14-berrange@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11 17:44:56 +02:00
Daniel P. Berrange b25b387fa5 qcow2: convert QCow2 to use QCryptoBlock for encryption
This converts the qcow2 driver to make use of the QCryptoBlock
APIs for encrypting image content, using the legacy QCow2 AES
scheme.

With this change it is now required to use the QCryptoSecret
object for providing passwords, instead of the current block
password APIs / interactive prompting.

  $QEMU \
    -object secret,id=sec0,file=/home/berrange/encrypted.pw \
    -drive file=/home/berrange/encrypted.qcow2,encrypt.key-secret=sec0

The test 087 could be simplified since there is no longer a
difference in behaviour when using blockdev_add with encrypted
images for the running vs stopped CPU state.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-12-berrange@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11 17:44:56 +02:00
Daniel P. Berrange 446d306d23 qcow2: make qcow2_encrypt_sectors encrypt in place
Instead of requiring separate input/output buffers for
encrypting data, change qcow2_encrypt_sectors() to assume
use of a single buffer, encrypting in place. The current
callers all used the same buffer for input/output already.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-11-berrange@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11 17:44:56 +02:00
Alberto Garcia ee22a9d869 qcow2: Merge the writing of the COW regions with the guest data
If the guest tries to write data that results on the allocation of a
new cluster, instead of writing the guest data first and then the data
from the COW regions, write everything together using one single I/O
operation.

This can improve the write performance by 25% or more, depending on
several factors such as the media type, the cluster size and the I/O
request size.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-06-26 14:51:13 +02:00
Alberto Garcia e034f5bcbc qcow2: Use unsigned int for both members of Qcow2COWRegion
Qcow2COWRegion has two attributes:

- The offset of the COW region from the start of the first cluster
  touched by the I/O request. Since it's always going to be positive
  and the maximum request size is at most INT_MAX, we can use a
  regular unsigned int to store this offset.

- The size of the COW region in bytes. This is guaranteed to be >= 0,
  so we should use an unsigned type instead.

In x86_64 this reduces the size of Qcow2COWRegion from 16 to 8 bytes.
It will also help keep some assertions simpler now that we know that
there are no negative numbers.

The prototype of do_perform_cow() is also updated to reflect these
changes.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-06-26 14:51:13 +02:00