Now we have some rST format docs in the docs/specs/ manual, we should
actually build and install it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-id: 20190610152444.20859-3-peter.maydell@linaro.org
The docs/specs/index.rst has a couple of minor issues which
we didn't notice because we weren't building the manual:
* the ToC entry for the new PPC XIVE docs points to
a nonexistent file
* the initial comment needs to be marked by '..', not '.',
or it will appear in the output
* the title doesn't match the capitialization used by
the existing interop or devel manuals, and uses
'full-system emulation' rather than the 'system emulation'
that the interop manual title uses
Fix these minor issues before we start trying to build the manual.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-id: 20190610152444.20859-2-peter.maydell@linaro.org
Our user-facing manual currently has a section "translator internals"
which has some high-level information about the design of the
TCG translator. This should really be in our new devel/ manual.
Convert it to RST format and move it there.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190607152827.18003-2-peter.maydell@linaro.org
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190605131221.29432-1-marcandre.lureau@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Sometimes, the behaviour of QEMU changes without a change in the QMP
syntax (usually by allowing values or operations that previously
resulted in an error). QMP clients may still need to know whether
they can rely on the changed behavior.
Let's add feature flags to the QAPI schema language, so that we can make
such changes visible with schema introspection.
An example for a schema definition using feature flags looks like this:
{ 'struct': 'TestType',
'data': { 'number': 'int' },
'features': [ 'allow-negative-numbers' ] }
Introspection information then looks like this:
{ "name": "TestType", "meta-type": "object",
"members": [
{ "name": "number", "type": "int" } ],
"features": [ "allow-negative-numbers" ] }
This patch implements feature flags only for struct types. We'll
implement them more widely as needed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20190606153803.5278-2-armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now that we have both ArchCPU and CPUArchState, we can define
this generically instead of via macro in each target's cpu.h.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The default-configs/ example added in 717171bd20 is no
more accurate since fa212a2b8b (and various further other
commits).
The Kconfig build system is now in place.
Use the aarch64-softmmu config as example.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190529140504.21580-1-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
All callers of bdrv_set_aio_context() are eliminated now, they have
moved to bdrv_try_set_aio_context() and related safe functions. Remove
bdrv_set_aio_context().
With this, we can now know that the .set_aio_ctx callback must be
present in bdrv_set_aio_context_ignore() because
bdrv_can_set_aio_context() would have returned false previously, so
instead of checking the condition, we can assert it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Next pull request against qemu-4.1. Highlights:
* KVM accelerated support for the XIVE interrupt controller in PAPR
guests
* A number of TCG vector fixes
* Fixes for the PReP / 40p machine
* Improvements to make check-tcg test coverage
Other than that it's just a bunch of assorted fixes, cleanups and
minor improvements.
This supersedes both the pull request dated 2019-05-21 and the one
dated 2019-05-22. I've dropped one hunk which I think may have caused
the check-tcg failure that Peter saw (by enabling the ppc64abi32
build, which I think has been broken for ages). I'm not entirely
certain, since I haven't reproduced exactly the same failure.
-----BEGIN PGP SIGNATURE-----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=2q3B
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.1-20190529' into staging
ppc patch queue 2019-05-29
Next pull request against qemu-4.1. Highlights:
* KVM accelerated support for the XIVE interrupt controller in PAPR
guests
* A number of TCG vector fixes
* Fixes for the PReP / 40p machine
* Improvements to make check-tcg test coverage
Other than that it's just a bunch of assorted fixes, cleanups and
minor improvements.
This supersedes both the pull request dated 2019-05-21 and the one
dated 2019-05-22. I've dropped one hunk which I think may have caused
the check-tcg failure that Peter saw (by enabling the ppc64abi32
build, which I think has been broken for ages). I'm not entirely
certain, since I haven't reproduced exactly the same failure.
# gpg: Signature made Wed 29 May 2019 07:49:04 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-4.1-20190529: (44 commits)
ppc/pnv: add dummy XSCOM registers for PRD initialization
ppc/pnv: introduce new skiboot platform properties
spapr: Don't migrate the hpt_maxpagesize cap to older machine types
spapr: change default interrupt mode to 'dual'
spapr/xive: fix multiple resets when using the 'dual' interrupt mode
docs: provide documentation on the POWER9 XIVE interrupt controller
spapr/irq: add KVM support to the 'dual' machine
ppc/xics: fix irq priority in ics_set_irq_type()
spapr/irq: initialize the IRQ device only once
spapr/irq: introduce a spapr_irq_init_device() helper
spapr: check for the activation of the KVM IRQ device
spapr: introduce routines to delete the KVM IRQ device
sysbus: add a sysbus_mmio_unmap() helper
spapr/xive: activate KVM support
spapr/xive: add migration support for KVM
spapr/xive: introduce a VM state change handler
spapr/xive: add state synchronization with KVM
spapr/xive: add hcall support when under KVM
spapr/xive: add KVM support
spapr: Print out extra hints when CAS negotiation of interrupt mode fails
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a new vhost-user message to give a unix socket to a vhost-user
backend for GPU display updates.
Back when I started that work, I added a new GPU channel because the
vhost-user protocol wasn't bidirectional. Since then, there is a
vhost-user-slave channel for the slave to send requests to the master.
We could extend it with GPU messages. However, the GPU protocol is
quite orthogonal to vhost-user, thus I chose to have a new dedicated
channel.
See vhost-user-gpu.rst for the protocol details.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190524130946.31736-2-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This documents the overall XIVE architecture and the XIVE support for
sPAPR guest machines (pseries).
It also provides documentation on the 'info pic' command.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190521082411.24719-1-clg@kaod.org>
Reviewed-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Update x86 CPU model guidance to recommend that the md-clear feature is
manually enabled with all Intel CPU models, when supported by the host
microcode.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190515141011.5315-3-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190315180735.13096-1-marcandre.lureau@redhat.com>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The Makefile tries to include device Kconfig dependencies via
-include $(SUBDIR_DEVICES_MAK_DEP)
and thus expects files that match *-softmmu/config-devices.mak.d ...
however, the minikconf script currently generates files a la
"*-softmmu-config.devices.mak.d" instead, so the dependency files
simply got ignored so far. For example, after a "touch hw/arm/Kconfig",
the arm-softmmu/config-devices.mak file is currently not re-generated.
Fix it by putting the dependency files in the *-softmmu folders now.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This new chapter in the QEMU documentation covers the security
requirements that QEMU is designed to meet and principles for securely
deploying QEMU.
It is just a starting point that can be extended in the future with more
information.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-id: 20190509121820.16294-3-stefanha@redhat.com
Message-Id: <20190509121820.16294-3-stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
At KVM Forum 2018 I gave a presentation on security in QEMU:
https://www.youtube.com/watch?v=YAdRf_hwxU8 (video)
https://vmsplice.net/~stefan/stefanha-kvm-forum-2018.pdf (slides)
This patch adds a guide to secure coding practices. This document
covers things that developers should know about security in QEMU. It is
just a starting point that we can expand on later. I hope it will be
useful as a resource for new contributors and will save code reviewers
from explaining the same concepts many times.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-id: 20190509121820.16294-2-stefanha@redhat.com
Message-Id: <20190509121820.16294-2-stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A test can, optionally, be tagged for one or many architectures. If a
test has been tagged for a single architecture, there's a high chance
that the test won't run on other architectures. This changes the
default order of choosing a default target architecture to use based
on the 'arch' tag value first.
The precedence order is for choosing a QEMU binary to use for a test
is now:
* qemu_bin parameter
* arch parameter
* arch tag value (for example, x86_64 if "🥑 tags=arch:x86_64
is used)
This means that if one runs:
$ avocado run -p qemu_bin=/usr/bin/qemu-system-x86_64 test.py
No arch parameter or tag will influence the selection of the QEMU
target binary. If one runs:
$ avocado run -p arch=ppc64 test.py
The target binary selection mechanism will attempt to find a binary
such as "ppc64-softmmu/qemu-system-ppc64". And finally, if one runs
a test that is tagged (in its docstring) with "arch:aarch64":
$ avocado run aarch64.py
The target binary selection mechanism will attempt to find a binary
such as "aarch64-softmmu/qemu-system-aarch64".
At this time, no provision is made to cancel the execution of tests if
the arch parameter given (manually) does not match the test "arch"
tag, but it may be a useful default behavior to be added in the
future.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190312171824.5134-7-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
It's useful to define the architecture that should be used in
situations such as:
* the intended target of the QEMU binary to be used on tests
* the architecture of code to be run within the QEMU binary, such
as a kernel image or a full blown guest OS image
This commit introduces both a test parameter and a test instance
attribute, that will contain such a value.
Now, when the "arch" test parameter is given, it will influence the
selection of the default QEMU binary, if one is not given explicitly
by means of the "qemu_img" parameter.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190312171824.5134-5-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The "this directory" reference is misleading and confusing, it's a
leftover from when this text was proposed in a README file inside
the "tests/acceptance/avocado_qemu" directory.
When that text was moved to the top level docs directory, the
reference was not updated.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190312171824.5134-4-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This just about rewrites the entirety of the bitmaps.rst document to
make it consistent with the 4.0 release. I have added new features seen
in the 4.0 release, as well as tried to clarify some points that keep
coming up when discussing this feature both in-house and upstream.
It does not yet cover pull backups or migration details, but I intend to
keep extending this document to cover those cases.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190426221528.30293-3-jsnow@redhat.com
[Adjusted commit message. --js]
Signed-off-by: John Snow <jsnow@redhat.com>
When a file supporting DAX is used as vNVDIMM backend, mmap it with
MAP_SYNC flag in addition which can ensure file system metadata
synced in each guest writes to the backend file, without other QEMU
actions (e.g., periodic fsync() by QEMU).
Current, We have below different possible use cases:
1. pmem=on is set, shared=on is set, MAP_SYNC supported:
a: backend is a dax supporting file.
- MAP_SYNC will active.
b: backend is not a dax supporting file.
- mmap will trigger a warning. then MAP_SYNC flag will be ignored
2. The rest of cases:
- we will never pass the MAP_SYNC to mmap2
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Signed-off-by: Zhang Yi <yi.z.zhang@linux.intel.com>
[ehabkost: Rebased patch to latest code on master]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Tested-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190422004849.26463-2-richardw.yang@linux.intel.com>
[ehabkost: squashed documentation patch]
Message-Id: <20190422004849.26463-3-richardw.yang@linux.intel.com>
[ehabkost: documentation fixup]
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Pankaj Gupta <pagupta@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Allows guest to boot from a vfio configured real dasd device.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <1554388475-18329-16-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
While the stibp CPU feature is not commonly used by guest OS for spectre
mitigation due to its performance impact, it is none the less best
practice to expose it to all guest OS. This allows the guest OS to
decide whether to make use or it.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190307121838.6345-3-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The docs currently say that the spec-ctrl feature is needed for both
Spectre variants, but it is only used to address Spectre v2. Also
remove the note about retpolines. The guest OS is usually treated
as a blackbox from host mgmt pov, so it won't have knowledge about
use of retpolines and thus should unconditionally expose spec-ctrl,
allowing the guest to decide whether to use it or not.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190307121838.6345-2-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This patch introduces two new messages VHOST_USER_GET_INFLIGHT_FD
and VHOST_USER_SET_INFLIGHT_FD to support transferring a shared
buffer between qemu and backend.
Firstly, qemu uses VHOST_USER_GET_INFLIGHT_FD to get the
shared buffer from backend. Then qemu should send it back
through VHOST_USER_SET_INFLIGHT_FD each time we start vhost-user.
This shared buffer is used to track inflight I/O by backend.
Qemu should retrieve a new one when vm reset.
Signed-off-by: Xie Yongji <xieyongji@baidu.com>
Signed-off-by: Chai Wen <chaiwen@baidu.com>
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Message-Id: <20190228085355.9614-2-xieyongji@baidu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As discussed during "[PATCH v4 00/29] vhost-user for input & GPU"
review, let's define a common set of backend conventions to help with
management layer implementation, and interoperability.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190308140454.32437-3-marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
One great big block comment isn't the best way to document
the syntax of a language.
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We already use (we didn't notice it) IN_USE flag for marking bitmap
metadata outdated, such as AUTO flag, which mirrors enabled/disabled
bitmaps. Now we are going to support bitmap resize, so it's good to
write IN_USE meaning with more details.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190311185147.52309-2-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
The previous commit added a way to configure firmware with -blockdev
rather than -drive if=pflash. Document it as the preferred way.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190308131445.17502-13-armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
- qcow2: Support for external data files
- qcow2: Default to 4KB for the qcow2 cache entry size
- Apply block driver whitelist for -drive format=help
- Several qemu-iotests improvements
-----BEGIN PGP SIGNATURE-----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=GCRI
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- qcow2: Support for external data files
- qcow2: Default to 4KB for the qcow2 cache entry size
- Apply block driver whitelist for -drive format=help
- Several qemu-iotests improvements
# gpg: Signature made Fri 08 Mar 2019 12:54:27 GMT
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (33 commits)
qcow2 spec: Describe string header extensions
qemu-iotests: Add dependency to qemu-nbd tool
ahci-test: Add dependency to qemu-img tool
qemu-iotests: amend with external data file
qemu-iotests: General tests for qcow2 with external data file
qemu-iotests: Preallocation with external data file
qcow2: Implement data-file-raw create option
qcow2: Store data file name in the image
qcow2: Creating images with external data file
qcow2: Add basic data-file infrastructure
qcow2: Support external data file in qemu-img check
qcow2: Return error for snapshot operation with data file
qcow2: External file I/O
qcow2: Prepare qcow2_co_block_status() for data file
qcow2: Return 0/-errno in qcow2_alloc_compressed_cluster_offset()
qcow2: Don't assume 0 is an invalid cluster offset
qcow2: Prepare count_contiguous_clusters() for external data file
qcow2: Prepare qcow2_get_cluster_type() for external data file
qcow2: Pass bs to qcow2_get_cluster_type()
qcow2: Basic definitions for external data files
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Be more specific about the string representation in header extensions.
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
QEMU 2.12 (commit 1221fe6f63) introduced
a new setting called l2-cache-entry-size that allows making entries on
the qcow2 L2 cache smaller than the cluster size.
I have been performing several tests with different cluster and entry
sizes and all of them show that reducing the entry size (aka L2 slice)
consistently improves I/O performance, notably during random I/O (all
tests done with sequential I/O show similar results). This is to be
expected because loading and evicting an L2 slice is more expensive
the larger the slice is.
Here are some numbers on fully populated 40GB qcow2 images. The
rightmost column represents the maximum L2 cache size in both cases.
Cluster size = 64 KB
|-------------+--------------+--------------+--------------|
| | 1MB L2 cache | 3MB L2 cache | 5MB L2 cache |
|-------------+--------------+--------------+--------------|
| 4KB slices | 6545 IOPS | 12045 IOPS | 55680 IOPS |
| 16KB slices | 5177 IOPS | 9798 IOPS | 56278 IOPS |
| 64KB slices | 2718 IOPS | 5326 IOPS | 57355 IOPS |
|-------------+--------------+--------------+--------------|
Cluster size = 256 KB
|--------------+----------------+--------------+-----------------|
| | 512KB L2 cache | 1MB L2 cache | 1280KB L2 cache |
|--------------+----------------+--------------+-----------------|
| 4KB slices | 8539 IOPS | 21071 IOPS | 55417 IOPS |
| 64KB slices | 3598 IOPS | 9772 IOPS | 57687 IOPS |
| 256KB slices | 1415 IOPS | 4120 IOPS | 58001 IOPS |
|--------------+----------------+--------------+-----------------|
As can be seen in the numbers, the only exception to the rule is when
the cache is large enough to hold all L2 tables. This is also to be
expected because in this case no cache entry is ever evicted so
reducing its size doesn't bring any benefit.
This patch sets the default L2 cache entry size to 4KB except when the
cache is large enough for the whole disk.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of including the same list of devices for each target,
set CONFIG_PCI to true, and make the devices default to present
whenever PCI is available. However, s390x does not want all the
PCI devices, so there is a separate symbol to enable them.
Done mostly with the following script:
while read i; do
i=${i%=y}; i=${i#CONFIG_}
sed -i -e'/^config '$i'$/!b' -en \
-e'a\' -e' default y if PCI_DEVICES\' -e' depends on PCI' \
`grep -lw $i hw/*/Kconfig`
done < default-configs/pci.mak
followed by replacing a few "depends on" clauses with "select"
whenever the symbol is not really related to PCI.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-31-yang.zhong@intel.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Python:
* introduce "python" directory with module namespace
* log QEMU launch command line on qemu.QEMUMachine
Acceptance Tests:
* initrd 4GiB+ test
* migration test
* multi vm support in test class
* bump Avocado version and drop "🥑 enable"
-----BEGIN PGP SIGNATURE-----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=dwff
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cleber/tags/python-next-pull-request' into staging
Python queue, 2019-02-22
Python:
* introduce "python" directory with module namespace
* log QEMU launch command line on qemu.QEMUMachine
Acceptance Tests:
* initrd 4GiB+ test
* migration test
* multi vm support in test class
* bump Avocado version and drop "🥑 enable"
# gpg: Signature made Fri 22 Feb 2019 19:37:07 GMT
# gpg: using RSA key 657E8D33A5F209F3
# gpg: Good signature from "Cleber Rosa <crosa@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 7ABB 96EB 8B46 B94D 5E0F E9BB 657E 8D33 A5F2 09F3
* remotes/cleber/tags/python-next-pull-request:
Acceptance tests: expect boot to extract 2GiB+ initrd with linux-v4.16
Acceptance tests: use linux-3.6 and set vm memory to 4GiB
tests.acceptance: adds simple migration test
tests.acceptance: adds multi vm capability for acceptance tests
scripts/qemu.py: log QEMU launch command line
Introduce a Python module structure
Acceptance tests: drop usage of "🥑 enable"
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Don't hard-code the QEMU version number into conf.py. Instead
we either pass it to sphinx-build on the command line, or
(if doing a standalone Sphinx run in a readthedocs.org setup)
extract it from the VERSION file.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190305172139.32662-12-peter.maydell@linaro.org
Message-id: 20190228145624.24885-12-peter.maydell@linaro.org
By default Sphinx wants to build a single manual at once.
For QEMU, this doesn't suit us, because we want to have
separate manuals for "Developer's Guide", "User Manual",
and so on, and we don't want to ship the Developer's Guide
to end-users. However, we don't want to completely duplicate
conf.py for each manual, and we'd like to continue to
support "build all docs in one run" for third-party sites
like readthedocs.org.
Make the top-level conf.py support two usage forms:
(1) as a common config file which is included by the conf.py
for each of QEMU's manuals: in this case sphinx-build is run
multiple times, once per subdirectory.
(2) as a top level conf file which will result in building all
the manuals into a single document: in this case sphinx-build is
run once, on the top-level docs directory.
Provide per-manual conf.py files and top level pages for
our first two manuals:
* QEMU Developer's Guide (docs/devel)
* QEMU System Emulation Management and Interoperability Guide
(docs/interop)
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-id: 20190305172139.32662-9-peter.maydell@linaro.org
Message-id: 20190228145624.24885-9-peter.maydell@linaro.org
sphinx-build complains about using :option: to mark up option
flags that it doesn't know about (because they were not defined
using the "option::" directive):
docs/pr-manager.rst:68: WARNING: unknown option: -d
Suppress these warnings. This way we get the semantic markup
of the option flag but no cross-referencing hyperlink.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190305172139.32662-8-peter.maydell@linaro.org
Message-id: 20190228145624.24885-8-peter.maydell@linaro.org
Sphinx defaults to including all the rST source files
in the HTML build and making each HTML page link to the
source file. Disable that.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190305172139.32662-7-peter.maydell@linaro.org
Message-id: 20190228145624.24885-7-peter.maydell@linaro.org
Add the 'navigation' bar to the sidebar, which for some
reason is not enabled by default. Remove 'relations', which
is effectively disabled anyway and isn't useful for us.
This requires that we mandate having at least Sphinx 1.3,
where the theme was added.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-id: 20190305172139.32662-6-peter.maydell@linaro.org
Message-id: 20190228145624.24885-6-peter.maydell@linaro.org
We don't yet have any custom static files, so disable this
config file setting to avoid a warning from sphinx about
not being able to find the directory.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190305172139.32662-5-peter.maydell@linaro.org
Message-id: 20190228145624.24885-5-peter.maydell@linaro.org
Commit the initial Sphinx conf.py and skeleton index.rst as
generated with sphinx-quickstart. We'll update these to
add QEMU-specific tweaks in subsequent commits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190305172139.32662-4-peter.maydell@linaro.org
Message-id: 20190228145624.24885-4-peter.maydell@linaro.org
Convert the memory API documentation from plain text
to restructured text format.
This is a very minimal conversion: all I had to change
was to mark up the ASCII art parts as Sphinx expects
for 'literal blocks', and fix up the bulleted lists
(Sphinx expects no leading space before the bullet, and
wants a blank line before after any list).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20190305172139.32662-3-peter.maydell@linaro.org
Message-id: 20190228145624.24885-3-peter.maydell@linaro.org
