This is mostly a problem within avocado as serial generally isn't busy
enough to overfill pipes. However the consequences of recording a
failed write will haunt us on replay when the log will be out of sync
to the playback.
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/2010
Acked-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231211091346.14616-13-alex.bennee@linaro.org>
A lot of the hang I see are when we end up spinning in
rr_wait_io_event for an event that will never come in playback. As a
new check functions which can see if we are in PLAY mode and kick us
us the wait function so the event can be processed.
This fixes most of the failures in replay_kernel.py
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/2013
Cc: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231211091346.14616-12-alex.bennee@linaro.org>
Now we have a centralised report function use it for missing character
events.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231211091346.14616-11-alex.bennee@linaro.org>
Figuring out why replay has failed is tricky at the best of times.
Lets centralise the reporting of a replay sync error and add a little
bit of extra information to help with debugging.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231211091346.14616-10-alex.bennee@linaro.org>
For clarity given it only has two states.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231211091346.14616-9-alex.bennee@linaro.org>
Remove the non-standard comment formatting and move the descriptions
into a proper kdoc comment.
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231211091346.14616-8-alex.bennee@linaro.org>
This will help in tracking where we are in the stream when debugging.
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231211091346.14616-6-alex.bennee@linaro.org>
To help debugging replay logs I've implemented decode_plain and
decode_char_write as well as put in a new table for the current format
of log.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231211091346.14616-5-alex.bennee@linaro.org>
QEMU complains about us not being explicit with setting snapshot so
lets do that. Also as cdroms are RO media we don't need to jump the
hoops of setting up snapshots and replay disks - just declare the
drive is a cdrom and nothing should change.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231211091346.14616-4-alex.bennee@linaro.org>
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231211091346.14616-3-alex.bennee@linaro.org>
There are a number of bugs against 32 bit x86 on the tracker. Lets at
least establish a baseline pure kernel boot can do record/replay
before we start looking at the devices.
Acked-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231211091346.14616-2-alex.bennee@linaro.org>
* Minor cleanups
* Fix for a regression in device reset introduced in 8.2
* Coverity fixes, including the removal of the iommufd backend mutex
* Introduced VFIOIOMMUClass, to avoid compiling spapr when !CONFIG_PSERIES
-----BEGIN PGP SIGNATURE-----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=zvPi
-----END PGP SIGNATURE-----
Merge tag 'pull-vfio-20240107' of https://github.com/legoater/qemu into staging
vfio queue:
* Minor cleanups
* Fix for a regression in device reset introduced in 8.2
* Coverity fixes, including the removal of the iommufd backend mutex
* Introduced VFIOIOMMUClass, to avoid compiling spapr when !CONFIG_PSERIES
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmWbIrcACgkQUaNDx8/7
# 7KFtPRAAxWcH9uh4tjJe4CgL+wXC+JOgviiNaI3AS6KmxdTHXcAvXMNAiGJfTBo4
# y/lJg+PYNgcDWrOqZqp1jj6ulWpO8ekLD9Nxv03e6o3kaArX/o2MtsrndOtWYnG/
# CUrr+/kTNeEw9008OaOca9vuh03xh3AnSwb3DzjHTvpMkj5LTXzuE1mU50DTUkn9
# GZjuN3rqHcdjJ/fXpiS6IgJbxcxLdo2aSykmyuq+TZmGf02lTES94PRef3Btr7Q6
# sKQZpv+A+gcZ8DHDJqfOEzEgu1OSa257q4ic47O1X3CeSyiGTGQ7rVKHtX6bK7xP
# mB9WOVqzzdH/g+kHNG+kVXMCQXZ0qo7VlIkHabYD220RryZBCqMecQ4aKPLFULQE
# e7C5ZaEvb7TLe/EaEQUSFrLCns7Nq6ciurcoAmP0cn2Ef1Sr1luNQVAR9LWRH1pc
# 1TeNmHy4nQygT0dQtFBXwNUZfnTuGcKdr43twReiCjX1ViPBU4lrcajVQH4rAuoe
# K/bBak2Kyi1LsFn8AzIwKXZZl83L57EyL+XEW8i5GN1jFSAHFx4ocUq8NQBa//kS
# xei9LV3HEJbAMOQsPO8HEK40mg5WR17s22AUClMqtD2DAQbPUrmcLbZ6Ttq6hTuV
# BqL56JFjbfML5RGjxwF9G8v5mdLmLlNRCGF2KI3NsT7dkMbVh24=
# =zvPi
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 07 Jan 2024 22:16:23 GMT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-vfio-20240107' of https://github.com/legoater/qemu:
backends/iommufd: Remove mutex
backends/iommufd: Remove check on number of backend users
vfio/migration: Add helper function to set state or reset device
vfio/container: Rename vfio_init_container to vfio_set_iommu
vfio/iommufd: Remove the use of stat() to check file existence
hw/vfio: fix iteration over global VFIODevice list
vfio/container: Replace basename with g_path_get_basename
vfio/iommufd: Remove CONFIG_IOMMUFD usage
vfio/spapr: Only compile sPAPR IOMMU support when needed
vfio/iommufd: Introduce a VFIOIOMMU iommufd QOM interface
vfio/spapr: Introduce a sPAPR VFIOIOMMU QOM interface
vfio/container: Intoduce a new VFIOIOMMUClass::setup handler
vfio/container: Introduce a VFIOIOMMU legacy QOM interface
vfio/container: Introduce a VFIOIOMMU QOM interface
vfio/container: Initialize VFIOIOMMUOps under vfio_init_container()
vfio/container: Introduce vfio_legacy_setup() for further cleanups
vfio/spapr: Extend VFIOIOMMUOps with a release handler
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fixs patch conflict
-----BEGIN PGP SIGNATURE-----
iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZZi5pAAKCRBAov/yOSY+
35iIA/4uXw92i0HJ3KK9NxzZlP9gwld6dATvincKNUpUgplK3NtBpRlVKm9NzLH8
Jdg84k7D5pNXfWAfomT+R3UMnL8R/zZZqeCCd60JE0Kbn4gCyCou2QuLKuWxPvNM
Jklf4mifq+gplg7lDF0GTLo8MUzhAmV8AuG7lUZb6IQJ68ui8A==
=NnLa
-----END PGP SIGNATURE-----
Merge tag 'pull-loongarch-20240106' of https://gitlab.com/gaosong/qemu into staging
pull-loongarch-20240106
Fixs patch conflict
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZZi5pAAKCRBAov/yOSY+
# 35iIA/4uXw92i0HJ3KK9NxzZlP9gwld6dATvincKNUpUgplK3NtBpRlVKm9NzLH8
# Jdg84k7D5pNXfWAfomT+R3UMnL8R/zZZqeCCd60JE0Kbn4gCyCou2QuLKuWxPvNM
# Jklf4mifq+gplg7lDF0GTLo8MUzhAmV8AuG7lUZb6IQJ68ui8A==
# =NnLa
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 06 Jan 2024 02:23:32 GMT
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20240106' of https://gitlab.com/gaosong/qemu:
target/loongarch: move translate modules to tcg/
target/loongarch/meson: move gdbstub.c to loongarch.ss
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce the target/loongarch/tcg directory. Its purpose is to hold the TCG
code that is selected by CONFIG_TCG
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240102020200.3462097-2-gaosong@loongson.cn>
gdbstub.c is not specific to TCG and can be used by
other accelerators, such as KVM accelerator
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240102020200.3462097-1-gaosong@loongson.cn>
Coverity reports a concurrent data access violation because be->users
is being accessed in iommufd_backend_can_be_deleted() without holding
the mutex.
However, these routines are called from the QEMU main thread when a
device is created. In this case, the code paths should be protected by
the BQL lock and it should be safe to drop the IOMMUFD backend mutex.
Simply remove it.
Fixes: CID 1531550
Fixes: CID 1531549
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
QOM already has a ref count on objects and it will assert much
earlier, when INT_MAX is reached.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
There are several places where failure in setting the device state leads
to a device reset, which is done by setting ERROR as the recover state.
Add a helper function that sets the device state and resets the device
in case of failure. This will make the code cleaner and remove duplicate
comments.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
vfio_container_init() and vfio_init_container() names are confusing
especially when we see vfio_init_container() calls vfio_container_init().
vfio_container_init() operates on base container which is consistent
with all routines handling 'VFIOContainerBase *' ops.
vfio_init_container() operates on legacy container and setup IOMMU
context with ioctl(VFIO_SET_IOMMU).
So choose to rename vfio_init_container to vfio_set_iommu to avoid
the confusion.
No functional change intended.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Using stat() before opening a file or a directory can lead to a
time-of-check to time-of-use (TOCTOU) filesystem race, which is
reported by coverity as a Security best practices violations. The
sequence could be replaced by open and fdopendir but it doesn't add
much in this case. Simply use opendir to avoid the race.
Fixes: CID 1531551
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <Zhenzhong.duan@intel.com>
Commit 3d779abafe ("vfio/common: Introduce a global VFIODevice list")
introduced a global VFIODevice list, but forgot to update the list
element field name when iterating over the new list. Change the code
to use the correct list element field.
Fixes: 3d779abafe ("vfio/common: Introduce a global VFIODevice list")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2061
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
g_path_get_basename() is a portable utility function that has the
advantage of not modifing the string argument. It also fixes a compile
breakage with the Musl C library reported in [1].
[1] https://lore.kernel.org/all/20231212010228.2701544-1-raj.khem@gmail.com/
Reported-by: Khem Raj <raj.khem@gmail.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Availability of the IOMMUFD backend can now be fully determined at
runtime and the ifdef check was a build time protection (for PPC not
supporting it mostly).
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
sPAPR IOMMU support is only needed for pseries machines. Compile out
support when CONFIG_PSERIES is not set. This saves ~7K of text.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
As previously done for the sPAPR and legacy IOMMU backends, convert
the VFIOIOMMUOps struct to a QOM interface. The set of of operations
for this backend can be referenced with a literal typename instead of
a C struct.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Move vfio_spapr_container_setup() to a VFIOIOMMUClass::setup handler
and convert the sPAPR VFIOIOMMUOps struct to a QOM interface. The
sPAPR QOM interface inherits from the legacy QOM interface because
because both have the same basic needs. The sPAPR interface is then
extended with the handlers specific to the sPAPR IOMMU.
This allows reuse and provides better abstraction of the backends. It
will be useful to avoid compiling the sPAPR IOMMU backend on targets
not supporting it.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This will help in converting the sPAPR IOMMU backend to a QOM interface.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Convert the legacy VFIOIOMMUOps struct to the new VFIOIOMMU QOM
interface. The set of of operations for this backend can be referenced
with a literal typename instead of a C struct. This will simplify
support of multiple backends.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
VFIOContainerBase was not introduced as an abstract QOM object because
it felt unnecessary to expose all the IOMMU backends to the QEMU
machine and human interface. However, we can still abstract the IOMMU
backend handlers using a QOM interface class. This provides more
flexibility when referencing the various implementations.
Simply transform the VFIOIOMMUOps struct in an InterfaceClass and do
some initial name replacements. Next changes will start converting
VFIOIOMMUOps.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
vfio_init_container() already defines the IOMMU type of the container.
Do the same for the VFIOIOMMUOps struct. This prepares ground for the
following patches that will deduce the associated VFIOIOMMUOps struct
from the IOMMU type.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This will help subsequent patches to unify the initialization of type1
and sPAPR IOMMU backends.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This allows to abstract a bit more the sPAPR IOMMU support in the
legacy IOMMU backend.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
If "busses" might be encountered as a plural of "bus" (5 instances),
the correct spelling is "buses" (26 instances). Fixing those 5
instances makes the doc more consistent.
Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The edu_check_range function checks that start <= end1 < end2, where
end1 is the upper bound (exclusive) of the guest-supplied DMA range and
end2 is the upper bound (exclusive) of the device's allowed DMA range.
When the guest tries to transfer exactly DMA_SIZE (4096) bytes, end1
will be equal to end2, so the check fails and QEMU aborts with this
puzzling error message (newlines added for formatting):
qemu: hardware error: EDU: DMA range
0x0000000000040000-0x0000000000040fff out of bounds
(0x0000000000040000-0x0000000000040fff)!
By checking end1 <= end2 instead, guests will be allowed to transfer
exactly 4096 bytes. It is not necessary to explicitly check for
start <= end1 because the previous two checks (within(addr, start, end2)
and end1 > addr) imply start < end1.
Fixes: b30934cb52 ("hw: misc, add educational driver", 2015-01-21)
Signed-off-by: Max Erenberg <merenber@uwaterloo.ca>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Testing upstream U-Boot with 'sifive_u' machine we see:
=> dhcp
ethernet@10090000: PHY present at 0
Could not get PHY for ethernet@10090000: addr 0
phy_connect failed
This has been working till QEMU 8.1 but broken since QEMU 8.2.
Fixes: 1b09eeb122 ("hw/net/cadence_gem: use FIELD to describe PHYMNTNC register fields")
Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
error_setg() appends newline to the formatted message.
Fixes: cb94ff5f80 ("audio: propagate Error * out of audio_init")
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Current error message:
qemu-system-x86_64: -chardev spice,id=foo: Parameter 'driver' expects an abstract device type
while in fact the meaning is in reverse, -chardev expects
a non-abstract device type.
Fixes: 777357d758 ("chardev: qom-ify" 2016-12-07)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
The mcycle/minstret counter's stop flag is mistakenly updated on a copy
on stack. Thus the counter increments even when the CY/IR bit in the
mcountinhibit register is set. This commit corrects its behavior.
Fixes: 3780e33732 (target/riscv: Support mcycle/minstret write operation)
Signed-off-by: Xu Lu <luxu.kernel@bytedance.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
- Unify CPU QOM type checks (Gavin)
- Simplify uses of some CPU related property (Philippe)
(start-powered-off, ARM reset-cbar and mp-affinity)
- Header and documentation cleanups (Zhao, Philippe)
- Have Memory API return boolean indicating possible error
- Fix frame filter mask in CAN sja1000 model (Pavel)
- QOM embed MCF5206 timer into SoC (Thomas)
- Simplify LEON3 qemu_irq_ack handler (Clément)
-----BEGIN PGP SIGNATURE-----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=an4B
-----END PGP SIGNATURE-----
Merge tag 'hw-cpus-20240105' of https://github.com/philmd/qemu into staging
HW core patch queue
- Unify CPU QOM type checks (Gavin)
- Simplify uses of some CPU related property (Philippe)
(start-powered-off, ARM reset-cbar and mp-affinity)
- Header and documentation cleanups (Zhao, Philippe)
- Have Memory API return boolean indicating possible error
- Fix frame filter mask in CAN sja1000 model (Pavel)
- QOM embed MCF5206 timer into SoC (Thomas)
- Simplify LEON3 qemu_irq_ack handler (Clément)
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmWYIxwACgkQ4+MsLN6t
# wN66fA//UBwgYqcdpg6Wz17qzgq1TWeZHHzYh7HbZRUCxhdSgS6TSQOH9Fi8VNYq
# Ed5a5l4ovP/2NRN1/S5PPBydyKXTU7wintHm2+suQbLSmplIE6yr0Ca6o8FLEeJ3
# hnE0dAoQCLS7eDpoeOEpGjzmJFiBSWLvyqAZLa/rZkCnCiZRHB6g/nAEM8I3I9bl
# //H20d3a/fektZxGnpEAeoMxrl4iA9hkFYVW8lbu6EhNFBPUkkj5Y8w47Kq/BIvD
# NmLTPgu4d7oahwlfsM6jWdRDG9zlEkXQor817PHwl00o45yAfeITsy40GvJeEYaI
# BcDLFfWrSm9SQb7/suXGeyU/SLmx7rsmJWfNYUoMr6807QcSH4ScPCfgzEQ4j8IV
# PmeVsxxLxT9CSzfxhMx5cXt33H2l+tEzwJ5UJCLQvmvTu+aDkt46Q09X/7j0z89m
# zSk/HBtdACIzwEWBAJsKuzarRTZNUvyXEsOxZ5l7xOxJpzpsNV2YVuChClVGtHOJ
# kr1PE2hxEMPY1vDyKU6ckDvW+XXgYhOXrPAxdx8gIwwd4oyDC5vVlIajvlqbOAsp
# Es7zq40b/is3ZnByEDbZ+yYvdYRLtVf/lDPK3KIv7IhrTNzH/HT1egshOQAVirY1
# Gw8f3fXqL3/84w383VI4efrSlKBJeb0i2SJ50y2N1clrF1qnlx0=
# =an4B
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 05 Jan 2024 15:41:16 GMT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* tag 'hw-cpus-20240105' of https://github.com/philmd/qemu: (71 commits)
target/sparc: Simplify qemu_irq_ack
hw/net/can/sja1000: fix bug for single acceptance filter and standard frame
hw/m68k/mcf5206: Embed m5206_timer_state in m5206_mbar_state
hw/pci-host/raven: Propagate error in raven_realize()
hw/nvram: Simplify memory_region_init_rom_device() calls
hw/misc: Simplify memory_region_init_ram_from_fd() calls
hw/sparc: Simplify memory_region_init_ram_nomigrate() calls
hw/arm: Simplify memory_region_init_rom() calls
hw: Simplify memory_region_init_ram() calls
misc: Simplify qemu_prealloc_mem() calls
util/oslib: Have qemu_prealloc_mem() handler return a boolean
backends: Reduce variable scope in host_memory_backend_memory_complete
backends: Have HostMemoryBackendClass::alloc() handler return a boolean
backends: Simplify host_memory_backend_memory_complete()
backends: Use g_autofree in HostMemoryBackendClass::alloc() handlers
memory: Have memory_region_init_ram_from_fd() handler return a boolean
memory: Have memory_region_init_ram_from_file() handler return a boolean
memory: Have memory_region_init_resizeable_ram() return a boolean
memory: Have memory_region_init_rom_device() handler return a boolean
memory: Simplify memory_region_init_rom_device_nomigrate() calls
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is a simple cleanup, since env is passed to qemu_irq_ack it can be
accessed from inside qemu_irq_ack. Just drop this parameter.
Co-developed-by: Frederic Konrad <konrad.frederic@yahoo.fr>
Signed-off-by: Clément Chigot <chigot@adacore.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240105102421.163554-7-chigot@adacore.com>
A CAN sja1000 standard frame filter mask has been computed and applied
incorrectly for standard frames when single Acceptance Filter Mode
(MOD_AFM = 1) has been selected. The problem has not been found
by Linux kernel testing because it uses dual filter mode (MOD_AFM = 0)
and leaves falters fully open.
The problem has been noticed by Grant Ramsay when testing with Zephyr
RTOS which uses single filter mode.
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Reported-by: Grant Ramsay <gramsay@enphaseenergy.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2028
Fixes: 733210e754 ("hw/net/can: SJA1000 chip register level emulation")
Message-ID: <20240103231426.5685-1-pisa@fel.cvut.cz>
There's no need to explicitely allocate the memory here, we can
simply embed it into the m5206_mbar_state instead.
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231221122939.11001-1-huth@tuxfamily.org>
When an Error** reference is available, it is better to
propagate local errors, rather then using generic ones,
which might terminate the whole QEMU process.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Message-Id: <20231120213301.24349-26-philmd@linaro.org>
