Use a continue statement so that "after going to sleep" is treated the same
way as "after processing a request". Pull the monitor_lock critical
section out of monitor_qmp_requests_pop_any_with_lock() and protect
qmp_dispatcher_co_shutdown with the monitor_lock.
The two changes are complex to separate because monitor_qmp_dispatcher_co()
previously had a complicated logic to check for shutdown both before
and after going to sleep.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of overloading qmp_dispatcher_co_busy, make the coroutine
pointer NULL. This will make things break spectacularly if somebody
tries to start a request after monitor_cleanup().
AIO_WAIT_WHILE_UNLOCKED() does not need qatomic_mb_read(), because
the macro contains all the necessary memory barriers.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clean up monitor_event to just use monitor_suspend/monitor_resume,
using mon->mux_out to protect against incorrect nesting (especially
on startup).
The only remaining case of reading suspend_cnt is in the can_read
callback, which is just advisory and can use qatomic_read.
As an extra benefit, mux_out is now simply protected by mon_lock.
Also, moving the prompt to the beginning of the main loop removes
it from the output in some error cases where QEMU does not actually
start successfully. It is not a full fix and it would be nice to
also remove the monitor heading, but this is already a small (though
unintentional) improvement.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow flushing and printing to the monitor while mon->mon_lock is
held. This will help cleaning up the locking of mon->mux_out and
mon->suspend_cnt.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move monitor_resume()'s call to readline_show_prompt() outside the
potentially locked section. Reuse the existing monitor_accept_input()
bottom half for this purpose.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
monitor_cleanup() is called from the main loop thread. Calling
AIO_WAIT_WHILE(qemu_get_aio_context(), ...) from the main loop thread is
equivalent to AIO_WAIT_WHILE_UNLOCKED(NULL, ...) because neither unlocks
the AioContext and the latter's assertion that we're in the main loop
succeeds.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230309190855.414275-7-stefanha@redhat.com>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The HMP monitor runs in the main loop thread. Calling
AIO_WAIT_WHILE(qemu_get_aio_context(), ...) from the main loop thread is
equivalent to AIO_WAIT_WHILE_UNLOCKED(NULL, ...) because neither unlocks
the AioContext and the latter's assertion that we're in the main loop
succeeds.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230309190855.414275-6-stefanha@redhat.com>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently, the function will simply fail if ancillary fds are not
provided, for ex on unsupported platforms.
This changes the failure from:
{"error": {"class": "GenericError", "desc": "No file descriptor
supplied via SCM_RIGHTS"}}
to:
{"error": {"class": "CommandNotFound", "desc": "The command getfd
has not been found"}}
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
A process with enough capabilities can duplicate a socket to QEMU. Add a
QMP command to import it and add it to the monitor fd list, so it can be
later used by other commands.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230306122751.2355515-9-marcandre.lureau@redhat.com>
As per comment, presumably to avoid syscall in critical section.
Fixes: 0210c3b39b ("monitor: Use LOCK_GUARD macros")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230306122751.2355515-7-marcandre.lureau@redhat.com>
Whether it is SPICE, VNC, D-Bus, or the socket chardev, they all
actually expect a socket kind or will fail in different ways at runtime.
Throw an error early if the given 'add_client' fd is not a socket, and
close it to avoid leaks.
This allows to replace the close() call with a more correct & portable
closesocket() version.
(this will allow importing sockets on Windows with a specialized command
in the following patch, while keeping the remaining monitor associated
sockets/add_client code & usage untouched)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230306122751.2355515-6-marcandre.lureau@redhat.com>
The auto completion does not work in some cases.
Case 1.
1. (qemu) info reg
2. Press 'Tab'.
3. It does not auto complete.
Case 2.
1. (qemu) block_resize flo
2. Press 'Tab'.
3. It does not auto complete 'floppy0'.
Since the readline_add_completion_of() may add any completion when
strlen(pfx) is zero, we remove the check with (name[0] == '\0') because
strlen() always returns zero in that case.
Fixes: 52f50b1e9f ("readline: Extract readline_add_completion_of() from monitor")
Cc: Joe Jin <joe.jin@oracle.com>
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Message-Id: <20230207045241.8843-1-dongli.zhang@oracle.com>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
What's left in misc.c is exactly the target-dependent part of the HMP
core. Rename accordingly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230124121946.1139465-33-armbru@redhat.com>
This requires giving them external linkage. Rename do_help_cmd() to
hmp_help(), and do_print() to hmp_print().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230124121946.1139465-30-armbru@redhat.com>
Target-independent hmp_gpa2hva(), hmp_gpa2hpa() move along to stay
next to hmp_gva2gpa().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230124121946.1139465-29-armbru@redhat.com>
monitor_putc() will soon be used from more than one .c file.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230124121946.1139465-28-armbru@redhat.com>
This moves the completion code from MAINTAINERS sections "Human
Monitor (HMP)" and "QMP" to section "QOM".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230124121946.1139465-26-armbru@redhat.com>
This moves the command from MAINTAINERS section "QMP" to section
"ACPI/SMBIOS)".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230124121946.1139465-25-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This moves these commands from MAINTAINERS section "Human
Monitor (HMP)" to section "Stats".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230124121946.1139465-24-armbru@redhat.com>
This moves these commands from MAINTAINERS section "QMP" to new
section "Stats". Status is Orphan. Volunteers welcome!
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230124121946.1139465-23-armbru@redhat.com>
This moves these commands from MAINTAINERS section "Human
Monitor (HMP)" and "QMP" to "Main loop".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230124121946.1139465-22-armbru@redhat.com>
This moves these commands from MAINTAINERS section "Human
Monitor (HMP)" to "TPM".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230124121946.1139465-21-armbru@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
This moves these commands from MAINTAINERS section "Human
Monitor (HMP)" to "virtio".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230124121946.1139465-20-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This moves the command from MAINTAINERS sections "Human Monitor (HMP)"
and "QMP" to "Migration".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230124121946.1139465-19-armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
This moves these commands from MAINTAINERS sections "Human
Monitor (HMP)" and "QMP" to "Migration".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230124121946.1139465-18-armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
This moves these commands from MAINTAINERS sections "Human
Monitor (HMP)" and "QMP" to "Network device backends".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230124121946.1139465-16-armbru@redhat.com>
Use g_strsplit() for the actual splitting. Give external linkage, so
the next commit can move one of its users to another source file.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230124121946.1139465-15-armbru@redhat.com>
This moves these commands from MAINTAINERS section "Human
Monitor (HMP)" to "Rocker" and "Network devices".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230124121946.1139465-14-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230124121946.1139465-13-armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
This moves these commands from MAINTAINERS sections "Human
Monitor (HMP)" and "QMP" to "QOM".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230124121946.1139465-12-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This moves these commands from MAINTAINERS section "Human
Monitor (HMP)" to "Machine core".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230124121946.1139465-11-armbru@redhat.com>
This moves these commands from MAINTAINERS section "QMP" to "Machine
core".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230124121946.1139465-10-armbru@redhat.com>
This moves these commands from MAINTAINERS sections "Human
Monitor (HMP)" and "QMP" to "Tracing".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230124121946.1139465-9-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The next commit will move a caller of help_cmd() to a new file.
Including monitor/monitor-internal.h there just for help_cmd() feels
silly. Better to provide it in monitor/hmp.h suitably renamed.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230124121946.1139465-8-armbru@redhat.com>
monitor/misc.h has static add_completion_option(). It's useful
elsewhere in the monitor. Since it's not monitor-specific, move it to
util/readline.c renamed to readline_add_completion_of(), and put it to
use.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230124121946.1139465-7-armbru@redhat.com>
No need to check for null arguments, no caller passes them.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230124121946.1139465-6-armbru@redhat.com>
This moves these commands from MAINTAINERS sections "Human
Monitor (HMP)" and "QMP" to "Character device backends".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230124121946.1139465-4-armbru@redhat.com>
This moves these commands from MAINTAINERS sections "Human
Monitor (HMP)" and "QMP" to "Overall Audio backends".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230124121946.1139465-3-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230124121946.1139465-2-armbru@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
We have two inclusion loops:
block/block.h
-> block/block-global-state.h
-> block/block-common.h
-> block/blockjob.h
-> block/block.h
block/block.h
-> block/block-io.h
-> block/block-common.h
-> block/blockjob.h
-> block/block.h
I believe these go back to Emanuele's reorganization of the block API,
merged a few months ago in commit d7e2fe4aac.
Fortunately, breaking them is merely a matter of deleting unnecessary
includes from headers, and adding them back in places where they are
now missing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221221133551.3967339-2-armbru@redhat.com>
-----BEGIN PGP SIGNATURE-----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=7OEC
-----END PGP SIGNATURE-----
Merge tag 'pull-monitor-2023-01-19' of https://repo.or.cz/qemu/armbru into staging
Monitor patches for 2023-01-19
# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAmPJO+8SHGFybWJydUBy
# ZWRoYXQuY29tAAoJEDhwtADrkYZTbBwP/RsZLLDCz6moSet4Hly+vPTWibyYYDkS
# uk6a70Ja7fsAcONumBaXdpoinPtbED662eYxidbLFr//tAjnKu57jnwAIFTTOKJc
# sCVtdgOlbNSZFrqyIr8ctY6yKJLLBaa02in/BczFIQphPatpUwvxrvrdgxc58NNK
# qaeKDnWKXvZ6EUaYPpruxqE5J/NV0ykyab9Rc8rNJqdUMnqbd662zHcA0l31misH
# gAfKBhReo53XUbfvoFS9kaoBQaTJPk4CcKHaT7NJXR8ezlIEQVLtFzdfAf04kSdG
# 8VRwwx5NDpmafATEaMXJhJ74Fyc8biDWXoQ6aA1jdUCu39B2EPl1H1qlCG9ZYp7w
# CkbJU6UwtOYsG11NU8Mr1u9rMlAgAVkkLsMYiiI4cpLBkI0vkoV66ms3oZgYUtbq
# /TgCpfjKpE87ZBLIwJjGsg+TMN2AH5lpt/49HV8QEFA8mI7h29oo2HvheXE7PPzH
# b9iIe9ADrKwB5DpJW2vigPj+fSHqoSGd3R/hUcMVOubKnJme97mys2hD+sfxga/H
# qfKLzgTqQI2dGhfow/8wzfYdfYmkii+ggDyzcxLAxx2ITO/fLWJygmTgXJmA3dl6
# pnpZvhOu4dEgK4VstugXcvgCVHUVXd9wqI9wxJAc+mKanTmZIJBnxCm/QVG2/w/d
# 5IgmP9Se7vb0
# =7OEC
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 19 Jan 2023 12:47:43 GMT
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* tag 'pull-monitor-2023-01-19' of https://repo.or.cz/qemu/armbru:
ui: Simplify control flow in qemu_mouse_set()
ui: Split hmp_mouse_set() and move the HMP part to ui/
ui: Don't check for mode change after mouse_set error
ui: Reduce nesting in hmp_change_vnc() slightly
ui: Factor out hmp_change_vnc(), and move to ui/ui-hmp-cmds.c
ui: Improve "change vnc" error reporting
ui: Move HMP commands from monitor to new ui/ui-hmp-cmds.c
ui: Factor out qmp_add_client() parts and move to ui/ui-qmp-cmds.c
ui: Move QMP commands from monitor to new ui/ui-qmp-cmds.c
ui: Clean up a few things checkpatch.pl would flag later on
ui/spice: Give hmp_info_spice()'s channel_names[] static linkage
ui/spice: QXLInterface method set_mm_time() is now dead, drop
ui/spice: Require spice-server >= 0.14.0
Revert "hmp: info spice: take out webdav"
ui/spice: Require spice-protocol >= 0.14.0
ui: Fix silent truncation of numeric keys in HMP sendkey
ui: Check numeric part of expire_password argument @time properly
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
