Since df2a6f29a5, bdrv_co_do_writev increases the total_sectors value of
a growable block devices on writes after the current end. This leads to
the virtual disk apparently growing in qcow2_save_vmstate, which in turn
affects the disk size captured by the internal snapshot taken directly
afterwards through e.g. the HMP savevm command. Such a "grown" snapshot
cannot be loaded after reopening the qcow2 image, since its disk size
differs from the actual virtual disk size (writing a VM state does not
actually increase the virtual disk size).
Fix this by restoring total_sectors at the end of qcow2_save_vmstate.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Evaluate the runtime overlap check options and set
BDRVQcowState.overlap_check appropriately.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add an array which assigns the option string to its corresponding
overlap check bit.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add runtime options to tune the overlap checks to be performed before
write accesses.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Replace the QCOW2_OL_DEFAULT macro by a variable overlap_check in
BDRVQcowState.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In qcow2_check_metadata_overlap and qcow2_pre_write_overlap_check,
change the parameter signifying the checks to perform from its current
positive form to a negative one, i.e., it will no longer explicitly
specify every check to perform but rather a mask of checks not to
perform.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In qcow2_write_compressed, if the compression fails, a normal cluster is
written to disk. This is done through bdrv_write on the qcow2 BDS
itself (using the guest offset), thus it is wrong to do a metadata
overlap check before.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The error message in qcow2_downgrade about an unsupported refcount
order is missing a space. This patch adds it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a new ImageInfoSpecificQCow2 type as a subtype of ImageInfoSpecific.
This contains the compatibility level as a string and an optional
lazy_refcounts boolean (optional means mandatory for compat >= 1.1 and
not available for compat == 0.10).
Also, add qcow2_get_specific_info, which returns this information.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
QCowHeader and QCowExtension are structs that reside in the on-disk
image format, and are read and written directly via bdrv_pread()/write(),
and as such should be packed to avoid any unintentional struct padding.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add an Error ** parameter to bdrv_create and its associated functions to
allow more specific error messages.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add an Error ** parameter to bdrv_open, bdrv_file_open and associated
functions to allow more specific error messages.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add an Error ** parameter to BlockDriver.bdrv_open and
BlockDriver.bdrv_file_open to allow more specific error messages.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Implement bdrv_amend_options for compat, size, backing_file, backing_fmt
and lazy_refcounts.
Downgrading images from compat=1.1 to compat=0.10 is achieved through
handling all incompatible flags accordingly, clearing all compatible and
autoclear flags and expanding all zero clusters.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Save the image refcount order in BDRVQcowState. This will be relevant
for future code supporting different refcount orders than four and also
for code that needs to verify a certain refcount order for an opened
image.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
During savevm, the VM state is written to the active L1 of the image and
then a snapshot is taken. After that, the VM state isn't needed any more
in the active L1 and should be discarded. This is implemented by this
patch.
The impact of not discarding the VM state is that a snapshot can never
become smaller than any previous snapshot (because it would be padded
with old VM state), and more importantly that future savevm operations
cause unnecessary COWs (with associated flushes), which makes subsequent
snapshots much slower.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
The function will be used internally instead of only being called for
guest discard requests.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
For now, bdrv_get_block_status is just another name for bdrv_is_allocated.
The next patches will add more flags.
This also touches all block drivers with a mostly mechanical rename. The
sole exception is cow; because it calls cow_co_is_allocated from the read
code, we keep that function and make cow_co_get_block_status a wrapper.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Some bdrv_is_allocated callers do not expect errors, but the fallback
in qcow2.c might make other callers trip on assertion failures or
infinite loops.
Fix the callers to always look for errors.
Cc: qemu-stable@nongnu.org
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Manage BlockDriverState lifecycle with refcnt, so bdrv_delete() is no
longer public and should be called by bdrv_unref() if refcnt is
decreased to 0.
This is an identical change because effectively, there's no multiple
reference of BDS now: no caller of bdrv_ref() yet, only bdrv_new() sets
bs->refcnt to 1, so all bdrv_unref() now actually delete the BDS.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If no corruptions remain after an image repair (and no errors have been
encountered), clear the corrupt flag in qcow2_check.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The pre-write overlap check function is now called before most of the
qcow2 writes (aborting it on collision or other error).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds an incompatible bit indicating corruption to qcow2. Any image
with this bit set may not be written to unless for repairing (and
subsequently clearing the bit if the repair has been successful).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
By the time that qemu 1.7 will be released, enough time will have passed
since qemu 1.1, which is the first version to understand version 3
images, that changing the default shouldn't hurt many people any more
and the benefits of using the new format outweigh the pain.
qemu-iotests already runs with compat=1.1 by default.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
In 4146b46c42e0989cb5842e04d88ab6ccb1713a48 (block: Produce zeros when
protocols reading beyond end of file), we break qemu-iotests ./check
-qcow2 022. This happens because qcow2 temporarily sets ->growable = 1
for vmstate accesses (which are stored beyond the end of regular image
data).
We introduce the bs->zero_beyond_eof to allow qcow2_load_vmstate() to
disable ->zero_beyond_eof temporarily in addition to enable ->growable.
[Since the broken patch "block: Produce zeros when protocols reading
beyond end of file" has not been merged yet, I have applied this fix
*first* and will then apply the next patch to keep the tree bisectable.
-- Stefan]
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Asias He <asias@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
By the time that qemu 1.7 will be released, enough time will have passed
since qemu 1.1, which is the first version to understand version 3
images, that changing the default shouldn't hurt many people any more
and the benefits of using the new format outweigh the pain.
qemu-iotests already runs with compat=1.1 by default.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is what QMP wants to use. The options haven't been enabled in any
release yet, so we're still free to change them.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
.has_zero_init defaults to 1 for all formats and protocols.
this is a dangerous default since this means that all
new added drivers need to manually overwrite it to 0 if
they do not ensure that a device is zero initialized
after bdrv_create().
if a driver needs to explicitly set this value to
1 its easier to verify the correctness in the review process.
during review of the existing drivers it turned out
that ssh and gluster had a wrong default of 1.
both protocols support host_devices as backend
which are not by default zero initialized. this
wrong assumption will lead to possible corruption
if qemu-img convert is used to write to such a backend.
vpc and vmdk also defaulted to 1 altough they support
fixed respectively flat extends. this has to be addresses
in separate patches. both formats as well as the mentioned
ssh and gluster are turned to the default of 0 with this
patch for safety.
a similar problem with the wrong default existed for
iscsi most likely because the driver developer did
oversee the default value of 1.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This optimises the discard operation for freed clusters by batching
discard requests (both snapshot deletion and bdrv_discard end up
updating the refcounts cluster by cluster).
Note that we don't discard asynchronously, but keep s->lock held. This
is to avoid that a freed cluster is reallocated and written to while the
discard is still in flight.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Deleted snapshots are discarded in the image file by default, discard
requests take their default from the -drive discard=... option and other
places that free clusters must always be enabled explicitly.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This adds a refcount update reason to all callers of update_refcounts(),
so that a follow-up patch can use this information to decide whether
clusters that reach a refcount of 0 should be discarded in the image
file.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This catches the situation that is described in the bug report at
https://bugs.launchpad.net/qemu/+bug/865518 and goes like this:
$ qemu-img create -f qcow2 huge.qcow2 $((1024*1024))T
Formatting 'huge.qcow2', fmt=qcow2 size=1152921504606846976 encryption=off cluster_size=65536 lazy_refcounts=off
$ qemu-io /tmp/huge.qcow2 -c "write $((1024*1024*1024*1024*1024*1024 - 1024)) 512"
Segmentation fault
With this patch applied the segfault will be avoided, however the case
will still fail, though gracefully:
$ qemu-img create -f qcow2 /tmp/huge.qcow2 $((1024*1024))T
Formatting 'huge.qcow2', fmt=qcow2 size=1152921504606846976 encryption=off cluster_size=65536 lazy_refcounts=off
qemu-img: The image size is too large for file format 'qcow2'
Note that even long before these overflow checks kick in, you get
insanely high memory usage (up to INT_MAX * sizeof(uint64_t) = 16 GB for
the L1 table), so with somewhat smaller image sizes you'll probably see
qemu aborting for a failed g_malloc().
If you need huge image sizes, you should increase the cluster size to
the maximum of 2 MB in order to get higher limits.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Compression in qcow2 requires image length to be a multiple of the
cluster size. Lift this requirement by zero-padding the final cluster
when necessary. The virtual disk size is still not cluster-aligned, so
the guest cannot access the zero sectors.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Directly pass the QEMUIOVector on instead of linearising it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Move aes.h from include/block to include/qemu to show it can be reused
by other subsystems.
Cc: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Instead of expecting a single l2meta, have a list of them. This allows
to still have a single I/O request for the guest data, even though
multiple l2meta may be needed in order to describe both a COW overwrite
and a new cluster allocation (typical sequential write case).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The unlock wakes up the next coroutine, but the currently running
coroutine will lock it again before it yields, so this doesn't make a
lot of sense.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Need to pass an options QDict to qcow2_open() now. This fixes a segfault
on the migration target with qcow2.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Otherwise, live migration of the top layer will miss zero clusters and
let the backing file show through. This also matches what is done in qed.
QCOW2_CLUSTER_ZERO clusters are invalid in v2 image files. Check this
directly in qcow2_get_cluster_offset instead of replicating the test
everywhere.
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
qcow2 images now accept a boolean lazy_refcounts options. Use it like
this:
-drive file=test.qcow2,lazy_refcounts=on
If the option is specified on the command line, it overrides the default
specified by the qcow2 header flags that were set when creating the
image.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It doesn't do anything yet except storing the options QDict in the
BlockDriverState.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This improves error reports for bochs, cow, qcow, qcow2, qed and vmdk
when a file with the wrong format is selected.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
One of the recent refactoring patches (commit f50f88b9) didn't take care
to initialise l2meta properly, so with zero-length writes, which don't
even enter the write loop, qemu just segfaulted.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
There's no reason for run_dependent_requests() to hold s->lock, and a
later patch will require that in fact the lock is not held.
Also, before this patch, run_dependent_requests() not only does what its
name suggests, but also removes the l2meta from the list of in-flight
requests. When changing this, it becomes an one-liner, so just inline it
completely.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is closer to where the dirty flag is really needed, and it avoids
having checks for special cases related to cluster allocation directly
in the writev loop.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Even for writes to already allocated clusters, an l2meta is allocated,
though it stays effectively unused. After this patch, only allocating
requests still have one. Each l2meta now describes an in-flight request
that writes to clusters that are not yet hooked up in the L2 table.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There's no real reason to have an l2meta for normal requests that don't
allocate anything. Before we can get rid of it, we must return the host
cluster offset in a different way.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
As soon as delayed COW is introduced, the l2meta struct is needed even
after completion of the request, so it can't live on the stack.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We want to use these events to suspend requests for testing concurrent
AIO requests. Suspending requests while they are holding the CoMutex is
rather boring for this purpose.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These are the stubs for the file reopen drivers for the qcow2 format.
There is currently nothing that needs to be done by the qcow2 driver
in reopen.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Image formats with a dirty bit, like qed and qcow2, repair dirty image
files upon open with BDRV_O_RDWR. Performing automatic repair when
qemu-img check runs is not ideal because the bdrv_open() call repairs
the image before the actual bdrv_check() call from qemu-img.c.
Fix this "double repair" since it leads to confusing output from
qemu-img check. Tell the block driver that this image is being opened
just for bdrv_check(). This skips automatic repair and qemu-img.c can
invoke it manually with bdrv_check().
Update the golden output for qemu-iotests 039 to reflect the new
qemu-img check output.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The dirty bit is cleared after image repair succeeds in qcow2_open().
Move this into qcow2_check() so that all callers benefit from this
behavior when fix mode is enabled.
This is necessary so qemu-img check can call .bdrv_check() and mark the
image clean.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Lazy refcounts is a performance optimization for qcow2 that postpones
refcount metadata updates and instead marks the image dirty. In the
case of crash or power failure the image will be left in a dirty state
and repaired next time it is opened.
Reducing metadata I/O is important for cache=writethrough and
cache=directsync because these modes guarantee that data is on disk
after each write (hence we cannot take advantage of caching updates in
RAM). Refcount metadata is not needed for guest->file block address
translation and therefore does not need to be on-disk at the time of
write completion - this is the motivation behind the lazy refcount
optimization.
The lazy refcount optimization must be enabled at image creation time:
qemu-img create -f qcow2 -o compat=1.1,lazy_refcounts=on a.qcow2 10G
qemu-system-x86_64 -drive if=virtio,file=a.qcow2,cache=writethrough
Update qemu-iotests 031 and 036 since the extension header size changes
when we add feature bit table entries.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds an incompatible feature bit to mark images that have not
been closed cleanly. When a dirty image file is opened a consistency
check and repair is performed.
Update qemu-iotests 031 and 036 since the extension header size changes
when we add feature bit table entries.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* mjt/mjt-iov2:
rewrite iov_send_recv() and move it to iov.c
cleanup qemu_co_sendv(), qemu_co_recvv() and friends
export iov_send_recv() and use it in iov_send() and iov_recv()
rename qemu_sendv to iov_send, change proto and move declarations to iov.h
change qemu_iovec_to_buf() to match other to,from_buf functions
consolidate qemu_iovec_copy() and qemu_iovec_concat() and make them consistent
allow qemu_iovec_from_buffer() to specify offset from which to start copying
consolidate qemu_iovec_memset{,_skip}() into single function and use existing iov_memset()
rewrite iov_* functions
change iov_* function prototypes to be more appropriate
virtio-serial-bus: use correct lengths in control_out() message
Conflicts:
tests/Makefile
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The DEBUG_ALLOC qcow2.h macro enables additional consistency checks
throughout the code. This makes it easier to spot corruptions that are
introduced during development. Since consistency check is an expensive
operation the DEBUG_ALLOC macro is used to compile checks out in normal
builds and qcow2_check_refcounts() calls missed the addition of a new
function argument.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The autoclear feature bits can be used for qcow2 file format features
that are safe to "drop" by old programs that do not understand the
feature. Upon opening the image file unknown autoclear feature bits are
cleared and the image file header is rewritten, but this was happening
too early in the code when critical header fields were not yet loaded.
Process autoclear feature bits after all necessary header information
has been loaded.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Writethrough does not need special-casing anymore in the qcow2 caches.
The block layer adds flushes after every guest-initiated data write,
and these will also flush the qcow2 caches to the OS.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The QED block driver already provides the functionality to not only
detect inconsistencies in images, but also fix them. However, this
functionality cannot be manually invoked with qemu-img, but the
check happens only automatically during bdrv_open().
This adds a -r switch to qemu-img check that allows manual invocation
of an image repair.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It now allows specifying offset within qiov to start from and
amount of bytes to copy. Actual implementation is just a call
to iov_to_buf().
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
qemu_iovec_concat() is currently a wrapper for
qemu_iovec_copy(), use the former (with extra
"0" arg) in a few places where it is used.
Change skip argument of qemu_iovec_copy() from
uint64_t to size_t, since size of qiov itself
is size_t, so there's no way to skip larger
sizes. Rename it to soffset, to make it clear
that the offset is applied to src.
Also change the only usage of uint64_t in
hw/9pfs/virtio-9p.c, in v9fs_init_qiov_from_pdu() -
all callers of it actually uses size_t too,
not uint64_t.
One added restriction: as for all other iovec-related
functions, soffset must point inside src.
Order of argumens is already good:
qemu_iovec_memset(QEMUIOVector *qiov, size_t offset,
int c, size_t bytes)
vs:
qemu_iovec_concat(QEMUIOVector *dst,
QEMUIOVector *src,
size_t soffset, size_t sbytes)
(note soffset is after _src_ not dst, since it applies to src;
for memset it applies to qiov).
Note that in many places where this function is used,
the previous call is qemu_iovec_reset(), which means
many callers actually want copy (replacing dst content),
not concat. So we may want to add a wrapper like
qemu_iovec_copy() with the same arguments but which
calls qemu_iovec_reset() before _concat().
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Similar to
qemu_iovec_memset(QEMUIOVector *qiov, size_t offset,
int c, size_t bytes);
the new prototype is:
qemu_iovec_from_buf(QEMUIOVector *qiov, size_t offset,
const void *buf, size_t bytes);
The processing starts at offset bytes within qiov.
This way, we may copy a bounce buffer directly to
a middle of qiov.
This is exactly the same function as iov_from_buf() from
iov.c, so use the existing implementation and rename it
to qemu_iovec_from_buf() to be shorter and to match the
utility function.
As with utility implementation, we now assert that the
offset is inside actual iovec. Nothing changed for
current callers, because `offset' parameter is new.
While at it, stop using "bounce-qiov" in block/qcow2.c
and copy decrypted data directly from cluster_data
instead of recreating a temp qiov for doing that.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This patch combines two functions into one, and replaces
the implementation with already existing iov_memset() from
iov.c.
The new prototype of qemu_iovec_memset():
size_t qemu_iovec_memset(qiov, size_t offset, int fillc, size_t bytes)
It is different from former qemu_iovec_memset_skip(), and
I want to make other functions to be consistent with it
too: first how much to skip, second what, and 3rd how many
of it. It also returns actual number of bytes filled in,
which may be less than the requested `bytes' if qiov is
smaller than offset+bytes, in the same way iov_memset()
does.
While at it, use utility function iov_memset() from
iov.h in posix-aio-compat.c, where qiov was used.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This check applies to all drivers, but QED lacks it.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
preallocate() will be locked. This is required because
qcow2_alloc_cluster_link_l2() assumes that it runs under a lock that it
can drop while COW is being performed.
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of printing an ugly bitmask, qemu can now print a more helpful
string even for yet unknown features.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds the basic infrastructure to qcow2 to handle version 3 images.
It includes code to create v3 images, allow header updates for v3 images
and checks feature bits.
It still misses support for zero clusters, so this is not a fully
compliant implementation of v3 yet.
The default for creating new images stays at v2 for now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
With this change, reading from a qcow2 image ignores all reserved bits
that are set in an L1 or L2 table entry.
Now get_cluster_offset() assigns *cluster_offset only the offset without
any other flags. The cluster type is not longer encoded in the offset,
but a positive return value in case of success.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu-img resize has some limitations with qcow2, but the user is only
told that "this image format does not support resize". Quite confusing,
so add some more detailed error_report() calls and change "this image
format" into "this image".
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Image files that make qemu-img info read several gigabytes into the
unknown header extensions list are bad. Just fail opening the image
if an extension claims to be larger than the header extension area.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The spec says that the length of extensions is padded to 8 bytes, not
the offset. Currently this is the same because the header size is a
multiple of 8, so this is only about compatibility with future changes
to the header size.
While touching it, move the calculation to a common place instead of
duplicating it for each header extension type.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
If we want header extensions to work as compatible extensions, we can't
destroy yet unknown header extensions when rewriting the header (e.g.
for changing the backing file). Save all unknown header extensions in a
list of blobs and include them in a new header.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In order to switch the backing file, qcow2 issues multiple write
requests that only changed a part of the image header. Any failure after
the first one would leave the header in an corrupted state. With this
patch, the whole header is written at once, so we can't fail in the
middle.
At the same time, this gives us a reusable functions that updates all
fields of the qcow2 header and not only the backing file.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Li Zhi Hui <zhihuili@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It's common to wake up all waiting coroutines. Introduce the
qemu_co_queue_restart_all() function to do this instead of looping over
qemu_co_queue_next() in every caller.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The qcow2, qcow, and vmdk block drivers are based on coroutines. They have a
coroutine mutex which protects internal state. We can convert the
.bdrv_is_allocated() function to .bdrv_co_is_allocated() by holding the mutex
around the cluster lookup operation.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Looks better when reviewing these source files.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
We don't reopen the actual file, but instead invoke the close and open routines.
We specifically ignore the backing file since it's contents are read-only and
therefore immutable.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
