Commit Graph

27 Commits

Author SHA1 Message Date
Cao jin ee640c625e pci: Convert msix_init() to Error and fix callers
msix_init() reports errors with error_report(), which is wrong when
it's used in realize().  The same issue was fixed for msi_init() in
commit 1108b2f. In order to make the API change as small as possible,
leave the return value check to later patch.

For some devices(like e1000e, vmxnet3, nvme) who won't fail because of
msix_init's failure, suppress the error report by passing NULL error
object.

Bonus: add comment for msix_init.

CC: Jiri Pirko <jiri@resnulli.us>
CC: Gerd Hoffmann <kraxel@redhat.com>
CC: Dmitry Fleytman <dmitry@daynix.com>
CC: Jason Wang <jasowang@redhat.com>
CC: Michael S. Tsirkin <mst@redhat.com>
CC: Hannes Reinecke <hare@suse.de>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Alex Williamson <alex.williamson@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-02-01 03:37:18 +02:00
Prasad J Pandit 8caed3d564 net: rocker: set limit to DMA buffer size
Rocker network switch emulator has test registers to help debug
DMA operations. While testing host DMA access, a buffer address
is written to register 'TEST_DMA_ADDR' and its size is written to
register 'TEST_DMA_SIZE'. When performing TEST_DMA_CTRL_INVERT
test, if DMA buffer size was greater than 'INT_MAX', it leads to
an invalid buffer access. Limit the DMA buffer size to avoid it.

Reported-by: Huawei PSIRT <psirt@huawei.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-10-26 09:57:59 +08:00
Eric Blake f394b2e20d qapi: Change Netdev into a flat union
This is a mostly-mechanical conversion that creates a new flat
union 'Netdev' QAPI type that covers all the branches of the
former 'NetClientOptions' simple union, where the branches are
now listed in a new 'NetClientDriver' enum rather than generated
from the simple union.  The existence of a flat union has no
change to the command line syntax accepted for new code, and
will make it possible for a future patch to switch the QMP
command to parse a boxed union for no change to valid QMP; but
it does have some ripple effect on the C code when dealing with
the new types.

While making the conversion, note that the 'NetLegacy' type
remains unchanged: it applies only to legacy command line options,
and will not be ported to QMP, so it should remain a wrapper
around a simple union; to avoid confusion, the type named
'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions'
in its place.  Then, in the C code, we convert from NetLegacy to
Netdev as soon as possible, so that the bulk of the net stack
only has to deal with one QAPI type, not two.  Note that since
the old legacy code always rejected 'hubport', we can just omit
that branch from the new 'NetLegacyOptions' simple union.

Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>:
Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com>
although the sed script in that patch no longer applies due to
other changes in the tree since then, and I also did some manual
cleanups (such as fixing whitespace to keep checkpatch happy).

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Fixup from Eric squashed in]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-19 20:18:02 +02:00
Markus Armbruster 2a6a4076e1 Clean up ill-advised or unusual header guards
Cleaned up with scripts/clean-header-guards.pl.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12 16:20:46 +02:00
Peter Maydell 4071887b58 hw/net/rocker: Don't use *_to_cpup()
Don't use *_to_cpup() to do byte-swapped loads; instead use
ld*_p() which correctly handle misaligned accesses.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Dmitry Fleytman <dmitry@daynix.com <mailto:dmitry@daynix.com>>
Message-id: 1466097446-981-4-git-send-email-peter.maydell@linaro.org
2016-06-27 16:39:56 +01:00
Laurent Vivier df5d1c17b6 rocker: Use DIV_ROUND_UP
Replace (((n) + (d) - 1) /(d)) by DIV_ROUND_UP(n,d).

This patch is the result of coccinelle script
scripts/coccinelle/round.cocci

CC: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-06-07 18:19:25 +03:00
Jiri Pirko 9fe7101f1d rocker: allow user to specify rocker world by property
Add property to specify rocker world. All ports will be assigned to this
world.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-03-08 15:34:18 +08:00
Jiri Pirko 031143c8d5 rocker: add name field into WorldOps ale let world specify its name
Also use this in world_name getter function.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-03-08 15:34:18 +08:00
Jiri Pirko 39e0c4f47d rocker: return -ENOMEM in case of some world alloc fails
Until now, 0 is returned in this error case. Fix it ro return -ENOMEM.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-03-08 15:34:18 +08:00
Jiri Pirko 0ab9cd9a4b rocker: forbid to change world type
Port to world assignment should be permitted only by qemu user. Driver
should not be able to do it, so forbid that possibility.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-03-08 15:34:18 +08:00
Peter Maydell e8d4046559 hw/net: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-19-git-send-email-peter.maydell@linaro.org
2016-01-29 15:07:23 +00:00
Prasad J Pandit 007cd223de net: rocker: fix an incorrect array bounds check
While processing transmit(tx) descriptors in 'tx_consume' routine
the switch emulator suffers from an off-by-one error, if a
descriptor was to have more than allowed(ROCKER_TX_FRAGS_MAX=16)
fragments. Fix an incorrect bounds check to avoid it.

Reported-by: Qinghao Tang <luodalongde@gmail.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-01-11 11:01:35 +08:00
Eric Blake 455b0fde8c error: More error_setg() usage
A few uses of error_set(ERROR_CLASS_GENERIC_ERROR) were missed in
c6bd8c706, or have snuck in since.  Nuke them.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447224690-9743-19-git-send-email-eblake@redhat.com>
Acked-by: Andreas Färber <afaerber@suse.de>
[Indentation tidied up, commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-11-11 18:56:26 +01:00
Markus Armbruster 778358d0a8 rocker: Use g_new() & friends where that makes obvious sense
g_new(T, n) is neater than g_malloc(sizeof(T) * n).  It's also safer,
for two reasons.  One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.

This commit only touches allocations with size arguments of the form
sizeof(T).  Same Coccinelle semantic patchas in commit b45c03f.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-10-08 19:46:47 +03:00
Daniel P. Berrange ef1e1e0782 maint: avoid useless "if (foo) free(foo)" pattern
The free() and g_free() functions both happily accept
NULL on any platform QEMU builds on. As such putting a
conditional 'if (foo)' check before calls to 'free(foo)'
merely serves to bloat the lines of code.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11 10:21:38 +03:00
Scott Feldman d0d2555852 rocker: mark copy-to-cpu pkts as forwarding offloaded
For pkts copied to the CPU (to be processed by guest driver), mark the Rx
descriptor with flag "OFFLOAD_FWD" to indicate device has already forwarded
pkt.  The guest driver will use this indicator to avoid duplicate
forwarding in the guest OS.

Examples include bcast/mcast/unknown ucast pkts flooded to bridged ports.
We want to avoid both the device and the guest bridge driver flooding these
pkts, which would result in duplicates pkts on the wire.  Packet sampling,
such as sFlow, can also use this technique to mark pkts for the guest OS to
record but otherwise drop.

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Message-id: 1435746792-41278-5-git-send-email-sfeldma@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-07-07 13:13:22 +01:00
Scott Feldman 96497af0af rocker: return -1 when dropping packet on ingress
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Message-id: 1435746792-41278-4-git-send-email-sfeldma@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-07-07 13:13:22 +01:00
Scott Feldman f211fcd75f rocker: fix missing break statements
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1435746792-41278-3-git-send-email-sfeldma@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-07-07 13:13:22 +01:00
Scott Feldman d1a88c96b7 rocker: fix misplaced break statement
Premature break in switch case block.  This particular case (group L2 rewrite)
will be used for L2 LAG and L3 ECMP support, neither of which are enabled in
the guest driver at this time, but are under development.

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1435746792-41278-2-git-send-email-sfeldma@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-07-07 13:13:22 +01:00
Scott Feldman 66851f640b rocker: don't queue receive pkts when port is disabled
Commit 6e99c63 ("net/socket: Drop net_socket_can_send") changed the
semantics around .can_receive for sockets to now require the device to
flush queued pkts when transitioning to a .can_receive=true state.  Rocker
device was not flushing the queue on .can_receive=true transition, so the
receiver was stuck.

But, turns out we really don't want any queuing at all on the port when the
port is disabled, otherwise when the port transitions to enabled, we'd
receive and forward stale pkts that really should have been dropped.  So,
let's remove .can_receive so avoid queuing and drop the pkt in .receive if
the port is disabled.

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1435717553-36187-1-git-send-email-sfeldma@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-07-07 13:10:26 +01:00
Gonglei ec50dd4634 rocker: fix memory leak
Meanwhile, using g_new0 instead of g_malloc0,
refer to commit 5839e53.

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Message-id: 1435213450-6700-1-git-send-email-arei.gonglei@huawei.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-07-07 13:10:26 +01:00
Markus Armbruster c6bd8c706a qerror: Clean up QERR_ macros to expand into a single string
These macros expand into error class enumeration constant, comma,
string.  Unclean.  Has been that way since commit 13f59ae.

The error class is always ERROR_CLASS_GENERIC_ERROR since the previous
commit.

Clean up as follows:

* Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and
  delete it from the QERR_ macro.  No change after preprocessing.

* Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into
  error_setg(...).  Again, no change after preprocessing.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:40 +02:00
Scott Feldman fafa4d508b qmp/hmp: add rocker device support
Add QMP/HMP support for rocker devices.  This is mostly for debugging purposes
to see inside the device's tables and port configurations.  Some examples:

(qemu) info rocker sw1
name: sw1
id: 0x0000013512005452
ports: 4

(qemu) info rocker-ports sw1
            ena/    speed/ auto
      port  link    duplex neg?
     sw1.1  up     10G  FD  No
     sw1.2  up     10G  FD  No
     sw1.3  !ena   10G  FD  No
     sw1.4  !ena   10G  FD  No

(qemu) info rocker-of-dpa-flows sw1
prio tbl hits key(mask) --> actions
2    60       pport 1 vlan 1 LLDP src 00:02:00:00:02:00 dst 01:80:c2:00:00:0e
2    60       pport 1 vlan 1 ARP src 00:02:00:00:02:00 dst 00:02:00:00:03:00
2    60       pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:00:02 proto 58
3    50       vlan 2 dst 33:33:ff:00:00:02 --> write group 0x32000001 goto tbl 60
2    60       pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:03:00 proto 58
3    50  1    vlan 2 dst 33:33:ff:00:03:00 --> write group 0x32000001 goto tbl 60
2    60       pport 2 vlan 2 ARP src 00:02:00:00:03:00 dst 00:02:00:00:02:00
3    50  2    vlan 2 dst 00:02:00:00:02:00 --> write group 0x02000001 goto tbl 60
2    60  1    pport 2 vlan 2 IP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 proto 1
3    50  2    vlan 1 dst 00:02:00:00:03:00 --> write group 0x01000002 goto tbl 60
2    60  1    pport 1 vlan 1 IP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 proto 1
2    60       pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:00:01 proto 58
3    50       vlan 1 dst 33:33:ff:00:00:01 --> write group 0x31000000 goto tbl 60
2    60       pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:02:00 proto 58
3    50  1    vlan 1 dst 33:33:ff:00:02:00 --> write group 0x31000000 goto tbl 60
1    60  173  pport 2 vlan 2 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x02000000
1    60  6    pport 2 vlan 2 IPv6 src <any> dst <any> --> write group 0x02000000
1    60  174  pport 1 vlan 1 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x01000000
1    60  174  pport 2 vlan 2 IP src <any> dst <any> --> write group 0x02000000
1    60  6    pport 1 vlan 1 IPv6 src <any> dst <any> --> write group 0x01000000
1    60  181  pport 2 vlan 2 ARP src <any> dst <any> --> write group 0x02000000
1    10  715  pport 2 --> apply new vlan 2 goto tbl 20
1    60  177  pport 1 vlan 1 ARP src <any> dst <any> --> write group 0x01000000
1    60  174  pport 1 vlan 1 IP src <any> dst <any> --> write group 0x01000000
1    10  717  pport 1 --> apply new vlan 1 goto tbl 20
1    0   1432 pport 0(0xffff) --> goto tbl 10

(qemu) info rocker-of-dpa-groups sw1
id (decode) --> buckets
0x32000001 (type L2 multicast vlan 2 index 1) --> groups [0x02000001,0x02000000]
0x02000001 (type L2 interface vlan 2 pport 1) --> pop vlan out pport 1
0x01000002 (type L2 interface vlan 1 pport 2) --> pop vlan out pport 2
0x02000000 (type L2 interface vlan 2 pport 0) --> pop vlan out pport 0
0x01000000 (type L2 interface vlan 1 pport 0) --> pop vlan out pport 0
0x31000000 (type L2 multicast vlan 1 index 0) --> groups [0x01000002,0x01000000]

[Added "query-" prefixes to rocker.json commands as suggested by Eric
Blake <eblake@redhat.com>.
--Stefan]

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Message-id: 1433985681-56138-5-git-send-email-sfeldma@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-12 13:42:17 +01:00
Scott Feldman 5ff1547b75 rocker: bring link up/down on PHY enable/disable
When the OS driver enables/disables the port, go ahead and set the port's
link status to up/down in response to the change.  This more closely
emulates real hardware when the PHY for the port is brought up/down
and the PHY negotiates carrier (link status) with link partner.  In
the case of qemu, the virtual rocker device can't really do link
negotiation with the link partner as that requires signally over a
physical medium (the wire), so just pretend the negotiation was
successful and bring the link up when the port is enabled.

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1433985681-56138-4-git-send-email-sfeldma@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-12 13:26:27 +01:00
David Ahern 773495364f rocker: Add support for phys name
Add ROCKER_TLV_CMD_PORT_SETTINGS_PHYS_NAME to port settings. This attribute
exports the port name to the guest OS allowing it to name interfaces with
sensible defaults.

Mostly done by Scott for phys_id support; adapted to phys_name by David.

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Message-id: 1433985681-56138-2-git-send-email-sfeldma@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-12 13:26:27 +01:00
David Ahern 7db161f6dd rocker: timestamp on the debug logs helps correlate with events in the VM
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Message-id: 1426306173-24884-10-git-send-email-sfeldma@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-11 14:49:04 +01:00
Scott Feldman dc488f8880 rocker: add new rocker switch device
Rocker is a simulated ethernet switch device.  The device supports up to 62
front-panel ports and supports L2 switching and L3 routing functions, as well
as L2/L3/L4 ACLs.  The device presents a single PCI device for each switch,
with a memory-mapped register space for device driver access.

Rocker device is invoked with -device, for example a 4-port switch:

  -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \
         ports[2]=dev2,ports[3]=dev3

Each port is a netdev and can be paired with using -netdev id=<port name>.

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David Ahern <dsahern@gmail.com>
Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com

rocker: fix clang compiler errors

Consolidate all forward typedef declarations to rocker.h.

Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>

rocker: add support for flow modification

We had support for flow add/del.  This adds support for flow mod.  I needed
this for L3 support where an existing route is modified using NLM_F_REPLACE.
For example:

  ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1
  ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2

The first cmd adds the route.  The second cmd changes the existing route by
changing its nexthop info.

In the device, a mod operation results in the matching flow enty being modified
with the new settings.  This is atomic to the device.

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-11 14:49:04 +01:00