exec-all.h contains TCG-specific definitions. It is not needed outside
TCG-specific files such as translate.c, exec.c or *helper.c.
One generic function had snuck into include/exec/exec-all.h; move it to
include/qom/cpu.h.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In user mode, there's only a static address translation, TBs are always
invalidated properly and direct jumps are reset when mapping change.
Thus the destination address is always valid for direct jumps and
there's no need to restrict it to the pages the TB resides in.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
We don't take care of direct jumps when address mapping changes. Thus we
must be sure to generate direct jumps so that they always keep valid
even if address mapping changes. Luckily, we can only allow to execute a
TB if it was generated from the pages which match with current mapping.
Document tcg_gen_goto_tb() declaration and note the reason for
destination PC limitations.
Some targets with variable length instructions allow TB to straddle a
page boundary. However, we make sure that both of TB pages match the
current address mapping when looking up TBs. So it is safe to do direct
jumps into the both pages. Correct the checks for some of those targets.
Given that, we can safely patch a TB which spans two pages. Remove the
unnecessary check in cpu_exec() and allow such TBs to be patched.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Each individual architecture needs to use the qemu_log_in_addr_range()
feature for enabling in_asm output as it is part of the frontend.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1458052224-9316-9-git-send-email-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Starting with the ARMv7 Virtualization Extensions, the A32 and T32
instruction sets provide instructions "MSR (banked)" and "MRS
(banked)" which can be used to access registers for a mode other
than the current one:
* R<m>_<mode>
* ELR_hyp
* SPSR_<mode>
Implement the missing instructions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1456762734-23939-1-git-send-email-peter.maydell@linaro.org
Commit cbc0326b6f caused SRS instructions executed from Secure
EL1 to trap to EL3 even if the specified mode was not monitor mode.
According to the ARMv8 Architecture reference manual [F6.1.203], ALL
of the following conditions need to be met for SRS to trap to EL3:
* It is executed at Secure PL1.
* The specified mode is monitor mode.
* EL3 is using AArch64.
Correct the condition governing the trap to EL3 to check the
specified mode.
Signed-off-by: Ralf-Philipp Weinmann <ralf+devel@comsecuris.com>
Message-id: 20160222224251.GA11654@beta.comsecuris.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweaked comment text to read 'specified mode'; edited
commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
System emulation only has a little-endian target; BE32 mode
is implemented by adjusting the low bits of the address
for every byte and halfword load and store. 64-bit accesses
flip the low and high words.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[PC changes:
* rebased against master (Jan 2016)
]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since this is not a high-performance path, just use a helper to
flip the E bit and force a lookup in the hash table since the
flags have changed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce a tbflags for endianness, set based upon the CPUs current
endianness. This in turn propagates through to the disas endianness
flag.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce a disas flag for setting the CPU data endianness. This allows
control of the endianness from the CPU state rather than hard-coding it
to TARGET_WORDS_BIGENDIAN.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[ PC changes:
* Split off as new patch from original:
"target-arm: introduce tbflag for CPSR.E"
* Wrote commit message from scratch
]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We'll need the DisasContext in the next patch to retrieve the
desired endianness, so pass it as a whole to gen_aa32_ld*/st*.
Unfortunately we cannot let those functions call get_mem_index,
because of user-mode load/store instructions.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[ PC changes:
* Fix long lines
]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
bswap_code is a CPU property of sorts ("is the iside endianness the
opposite way round to TARGET_WORDS_BIGENDIAN?") but it is not the
actual CPU state involved here which is SCTLR.B (set for BE32
binaries, clear for BE8).
Replace bswap_code with SCTLR.B, and pass that to arm_ld*_code.
The next patches will make data fetches honor both SCTLR.B and
CPSR.E appropriately.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[PC changes:
* rebased on master (Jan 2016)
* s/TARGET_USER_ONLY/CONFIG_USER_ONLY
* Use bswap_code() for disas_set_info() instead of raw sctlr_b
]
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Adds the 'TCGv_env' type for pointers to 'CPUArchState' objects. The
tracing infrastructure later needs to differentiate between regular
pointers and pointers to vCPUs.
Also changes all targets to use the new 'TCGv_env' type instead of the
generic 'TCGv_ptr'. As of now, the change is merely cosmetic ('TCGv_env'
translates into 'TCGv_ptr'), but that could change in the future to
enforce the difference.
Note that a 'TCGv_env' type (for 'CPUState') is not added, since all
helpers currently receive the architecture-specific
pointer ('CPUArchState').
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Acked-by: Richard Henderson <rth@twiddle.net>
Message-id: 145641859552.30295.7821536833590725201.stgit@localhost
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The rules for setting the CPSR on a 32-bit exception return are
subtly different from those for setting the CPSR via an instruction
like MSR or CPS. (In particular, in Hyp mode changing the mode bits
is not valid via MSR or CPS.) Split the exception-return case into
its own helper for setting CPSR, so we can eventually handle them
differently in the helper function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1455556977-3644-2-git-send-email-peter.maydell@linaro.org
Make get_r13_banked() raise an exception at runtime for the
corner case of SRS from System mode, so that we can UNDEF it;
this brings us in to line with the ARM ARM's set of permitted
CONSTRAINED UNPREDICTABLE choices.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
The SRS instruction is:
* UNDEFINED in Hyp mode
* UNPREDICTABLE in User or System mode
* UNPREDICTABLE if the specified mode isn't accessible
* trapped to EL3 if EL3 is AArch64 and we are at Secure EL1
Clean up the code to handle all these cases cleanly, including
picking UNDEF as our choice of UNPREDICTABLE behaviour rather
blindly trusting the mode field passed in the instruction.
As part of this, move the check for IS_USER into gen_srs()
itself rather than having it done by the caller.
The exception is that we don't UNDEF for calls from System
mode, which need a runtime check. This will be dealt with in
the following commits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
All Thumb Neon and VFP instructions are 32 bits, so the IL
bit in the syndrome register should be set. Pass false to the
syn_* function's is_16bit argument rather than s->thumb
so we report the correct IL bit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1454683067-16001-4-git-send-email-peter.maydell@linaro.org
All Thumb coprocessor instructions are 32 bits, so the IL
bit in the syndrome register should be set. Pass false to the
syn_* function's is_16bit argument rather than s->thumb
so we report the correct IL bit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1454683067-16001-3-git-send-email-peter.maydell@linaro.org
System registers might have access requirements which need to
be described via a CPAccessFn and which differ for reads and
writes. For this to be possible we need to pass the access
function a parameter to tell it whether the access being checked
is a read or a write.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1454506721-11843-6-git-send-email-peter.maydell@linaro.org
Thus, use cpu_env as the parameter, not TCG_AREG0 directly.
Update all uses in the translators.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Split the bits that require it to exec/log.h.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-id: 1452174932-28657-8-git-send-email-den@openvz.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1449505425-32022-3-git-send-email-peter.maydell@linaro.org
The AArch32 translation completion code for singlestep enabled/active
case was a way more confusing and too repetitive then it needs to be.
Probably that was the cause for a bug to be introduced into it at some
point. The bug was that SWI/HVC/SMC exception would be generated in
condition-failed instruction code path whereas it shouldn't.
This patch rewrites the code in a way similar to the non-singlestep
case.
In the condition-passed/unconditional instruction code path we need to:
- Write the condexec bits back to the CPU state
- Advance the singlestep state machine and generate a corresponding
exception in case of SWI/HVC/SMC
- Write the PC back to the CPU state if it hasn't already been written
and generate an appropriate singlestep exception otherwise
In the condition-failed instruction code path we need to:
- Set a TCG label to jump to it if the condition is failed
- Write the condexec bits back to the CPU state
- Write the PC back to the CPU state since it hasn't been written in
this case
- Generate an appropriate singlestep exception
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1448474560-22475-1-git-send-email-serge.fdrv@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Qemu does not generally perform alignment checks. However, the ARM ARM
requires implementation of alignment exceptions for a number of cases
including LDREX, and Windows-on-ARM relies on this.
This change adds plumbing to enable alignment checks on loads using
MO_ALIGN, a do_unaligned_access hook to raise the exception (data
abort), and uses the new aligned loads in LDREX (for all but
single-byte loads).
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Message-id: 1449167808-5656-1-git-send-email-Andrew.Baumann@microsoft.com
[PMM: set WnR bits in syndrome and FSR as appropriate]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Architectural breakpoint check could raise an exceptions, thus condexec
bits should be updated before calling gen_helper_check_breakpoints().
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1447767527-21268-3-git-send-email-serge.fdrv@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Coprocessor access instructions are allowed inside IT block.
gen_helper_access_check_cp_reg() can raise an exceptions thus condexec
bits should be updated before.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1447767527-21268-2-git-send-email-serge.fdrv@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
PC should be updated in the CPU state before calling check_breakpoints()
helper. Otherwise, the helper would not see the correct PC in the CPU
state if it is not at the start of a TB.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1447176222-16401-1-git-send-email-serge.fdrv@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
AArch32 translation code does not distinguish between DISAS_UPDATE and
DISAS_JUMP. Thus, we cannot use any of them without first updating PC in
CPU state. Furthermore, it is too complicated to update PC in CPU state
before PC gets updated in disas context. So it is hardly possible to
correctly end TB early if is is not likely to be executed before calling
disas_*_insn(), e.g. just after calling breakpoint check helper.
Modify DISAS_UPDATE and DISAS_JUMP usage in AArch32 translation and
apply to them the same semantic as AArch64 translation does:
- DISAS_UPDATE: update PC in CPU state when finishing translation
- DISAS_JUMP: preserve current PC value in CPU state when finishing
translation
This patch fixes a bug in AArch32 breakpoint handling: when
check_breakpoints helper does not generate an exception, ending the TB
early with DISAS_UPDATE couldn't update PC in CPU state and execution
hangs.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1447097859-586-1-git-send-email-serge.fdrv@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If this CPU supports EL3, enhance the printing of the current
CPU mode in debug logging to distinguish S from NS modes as
appropriate.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1445883178-576-3-git-send-email-peter.maydell@linaro.org
Some targets already had this within their logic, but make sure
it's present for all targets.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
When the memory we're trying to translate code from is not executable we have
to turn this into a guest fault. In order to report the correct PC for this
fault, and to make sure it is not reported until after any other possible
faults for instructions earlier in execution, we must terminate TBs at
the end of a page, in case the next instruction is in a non-executable page.
This is simple for T16, A32 and A64 instructions, which are always aligned
to their size. However T32 instructions may be 32-bits but only 16-aligned,
so they can straddle a page boundary.
Correct the condition that checks whether the next instruction will touch
the following page, to ensure that if we're 2 bytes before the boundary
and this insn is T32 then we end the TB.
Reported-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A QEMU breakpoint match is not definitely an architectural breakpoint
match. If an exception is generated unconditionally during translation,
it is hardly possible to ignore it in the debug exception handler.
Generate a call to a helper to check CPU breakpoints and raise an
exception only if any breakpoint matches architecturally.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If any store instruction writes the code inside the same TB
after this store insn, the execution of the TB must be stopped
to execute new code correctly.
As described in ARMv8 manual D3.4.6 self-modifying code must do an
IC invalidation to be valid, and an ISB after it. So it's enough to end
the TB after ISB instruction on the code translation.
Also this TB break is necessary to take any pending interrupts immediately
after an ISB (as required by ARMv8 ARM D1.14.4).
Signed-off-by: Sergey Sorokin <afarallax@yandex.ru>
[PMM: tweaked commit message and comments slightly]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It is no longer used, so tidy up everything reached by it.
This includes the gen_opc_* arrays, the search_pc parameter
and the inline gen_intermediate_code_internal functions.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The gen_opc_* arrays are already redundant with the data stored in
the insn_start arguments. Transition restore_state_to_opc to use
data from the latter.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Adjust all translators to respect it.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reduce the boilerplate required for each target. At the same time,
move the test for breakpoint after calling tcg_gen_insn_start.
Note that arm and aarch64 do not use cpu_breakpoint_test, but still
move the inline test down after tcg_gen_insn_start.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This does tidy the icount test common to all targets.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
While we're at it, emit the opcode adjacent to where we currently
record data for search_pc. This puts gen_io_start et al on the
"correct" side of the marker.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
With an eye toward making it mandatory.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Handling this with TCG_COND_ALWAYS will allow these unlikely
cases to be handled without special cases in the rest of the
translator. The TCG optimizer ought to be able to reduce
these ALWAYS conditions completely.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1441909103-24666-4-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Split arm_gen_test_cc into 3 functions, so that it can be reused
for non-branch TCG comparisons.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1441909103-24666-3-git-send-email-rth@twiddle.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is a bug fix for aarch64. At present, we have branches using
the 32-bit (translate.c) versions of cpu_[NZCV]F, but we set the flags
using the 64-bit (translate-a64.c) versions of cpu_[NZCV]F. From
the view of the TCG code generator, these are unrelated variables.
The bug is hard to see because we currently only read these variables
from branches, and upon reaching a branch TCG will first spill live
variables and then reload the arguments of the branch. Since the
32-bit versions were never live until reaching the branch, we'd re-read
the data that had just been spilled from the 64-bit versions.
There is currently no such problem with the cpu_exclusive_* variables,
but there's no point in tempting fate.
Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1441909103-24666-2-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Many source files have doubled words (eg "the the", "to to",
and so on). Most of these can simply be removed, but a couple
were actual mis-spellings (eg "to to" instead of "to do").
There was even one triple word score "to to to" :-)
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
If EL3 is not supported in current configuration,
we should not try to get EL3 bitness.
Signed-off-by: Sergey Sorokin <afarallax@yandex.ru>
Message-id: 1441208342-10601-2-git-send-email-afarallax@yandex.ru
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the YIELD instruction in the ARM and Thumb translators to
actually yield control back to the top level loop rather than being
a simple no-op. (We already do this for A64.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1435672316-3311-3-git-send-email-peter.maydell@linaro.org
disas does not need to access the CPU env for any reason. Change the
APIs to accept CPU pointers instead. Small change pattern needs to be
applied to all target translate.c. This brings us closer to making
disas.o a common-obj and less architecture specific in general.
Cc: Richard Henderson <rth@twiddle.net>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Jia Liu <proljc@gmail.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Paolo Bonzini
Sergey Fedorov
Alex Bennée
Peter Maydell
Ralf-Philipp Weinmann
Peter Crosthwaite
Lluís Vilanova
Richard Henderson
Andrew Baumann
Sergey Sorokin
Daniel P. Berrange
Peter Crosthwaite