This series fixes the SeaBIOS-hppa firmware and the serial ports setup code in
qemu so that it reflects the real hardware and allows serial port pass-through
from the host to guests.
Tested with Linux guests.
v2: Changes suggested by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
- Split out hppa_hardware.h restoration to an own patch
- Drop unneccesary checks for serial_hd(x)
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYpH5NAAKCRD3ErUQojoP
X0p3APsHdN4SDIVHJ3vjfzrvmuJ8rEUzsK4COdlgWBUT4jgVBgEApk9jj6X0ZfkI
bUVVQAOqHZbgXhEeiHNVWbsPfEqsqQw=
=aj8q
-----END PGP SIGNATURE-----
Merge tag 'hppa-serial-fix-pull-request' of https://github.com/hdeller/qemu-hppa into staging
hppa: Fix serial port pass-through
This series fixes the SeaBIOS-hppa firmware and the serial ports setup code in
qemu so that it reflects the real hardware and allows serial port pass-through
from the host to guests.
Tested with Linux guests.
v2: Changes suggested by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
- Split out hppa_hardware.h restoration to an own patch
- Drop unneccesary checks for serial_hd(x)
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYpH5NAAKCRD3ErUQojoP
# X0p3APsHdN4SDIVHJ3vjfzrvmuJ8rEUzsK4COdlgWBUT4jgVBgEApk9jj6X0ZfkI
# bUVVQAOqHZbgXhEeiHNVWbsPfEqsqQw=
# =aj8q
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 28 May 2022 03:28:04 AM PDT
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'hppa-serial-fix-pull-request' of https://github.com/hdeller/qemu-hppa:
hppa: Fix serial port assignments and pass-through
hppa: Sync contents of hppa_hardware.h header file with SeaBIOS-hppa
New SeaBIOS-hppa version 6
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This fixes the serial ports in the emulation to behave as on original
hardware.
On the real hardware, the LASI UART is serial port #0 and the DINO UART
is serial port #1. This is fixed in SeaBIOS-hppa firmware v6, which is
why at least this firmware version is required.
The serial port addresses in hppa/hppa_hardware.h have to be swapped,
and when creating the virtual serial ports the correct port addresses
are used.
This patch now for example allows to specify on the qemu command line:
-serial mon:stdio -serial /dev/ttyS4
to use the emulated ttyS0 in the guest for console output, and pass
ttyS4 from the host to ttyS1 in the guest.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The hppa_hardware.h header file holds many constants for addresses and
offsets which are needed while building the firmware (SeaBIOS-hppa) and
while setting up the virtual machine in QEMU.
That's why this header file needs to be in sync between both source code
repositories. This patch adds a comment mentioning this dependency at
the top of this file and restores some DINO relevant offsets.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Use more conventional variables to set the location of pre-built
DLL/bin.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Message-Id: <20220525144140.591926-15-marcandre.lureau@redhat.com>
No clear reason to make guesses here.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Message-Id: <20220525144140.591926-13-marcandre.lureau@redhat.com>
No need to setup an environment or to check if the variable is undefined
manually.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Message-Id: <20220525144140.591926-12-marcandre.lureau@redhat.com>
This a more accurate way to lookup the test data, and will allow to move
the test in a subproject.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Message-Id: <20220525144140.591926-11-marcandre.lureau@redhat.com>
Change build_fs_mount_list() to return bool, in accordance
with the guidance under = Rules = in include/qapi/error.h
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Suggested-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220525144140.591926-10-marcandre.lureau@redhat.com>
qemu_open_old() uses qemu_open_internal() which handles special
"/dev/fdset/" path for monitor fd sets, set CLOEXEC, and uses Error
reporting (and some O_DIRECT special error casing).
The monitor fdset handling is unnecessary for qga, use
qga_open_cloexec() instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Message-Id: <20220525144140.591926-9-marcandre.lureau@redhat.com>
Allow for a single point of error reporting, and further refactoring.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220525144140.591926-8-marcandre.lureau@redhat.com>
The function takes care of setting CLOEXEC.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220525144140.591926-7-marcandre.lureau@redhat.com>
QGA calls qemu_open_old() in various places. Calling qemu_open() instead
isn't a great alternative, as it has special "/dev/fdset" handling and
depends on QEMU internal monitor data structures.
Instead, provide a simple helper for QGA needs, with Error* support. The
following patches will make use of it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220525144140.591926-6-marcandre.lureau@redhat.com>
There is a bit too much nesting in the function, this can be simplified
a bit to improve readability.
This also helps with the following error handling changes.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220525144140.591926-5-marcandre.lureau@redhat.com>
SHGetFolderPath() is a deprecated API:
https://docs.microsoft.com/en-us/windows/win32/api/shlobj_core/nf-shlobj_core-shgetfolderpatha
It is a wrapper for SHGetKnownFolderPath() and CSIDL_COMMON_PATH is
mapped to FOLDERID_ProgramData:
https://docs.microsoft.com/en-us/windows/win32/shell/csidl
g_get_system_data_dirs() is a suitable replacement, as it will have
FOLDERID_ProgramData in the returned list. However, it follows the XDG
Base Directory Specification, if `XDG_DATA_DIRS` is defined, it will be
returned instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20220525144140.591926-3-marcandre.lureau@redhat.com>
The function is required by get_relocated_path() (already in cutils),
and used by qemu-ga and may be generally useful.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220525144140.591926-2-marcandre.lureau@redhat.com>
Most of the changes are enhancements/fixes made in TCG ppc emulation
code. Several bugs fixes were made across the board as well.
Changes include:
- tcg and target/ppc: VSX MMA implementation, fixes in helper
declarations to use call flags, memory ordering, tlbie and others
- pseries: fixed stdout-path setting with -machine graphics=off
- pseries: allow use of elf parser for kernel address
- other assorted fixes and improvements
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCYo/yvgAKCRA82cqW3gMx
ZMeRAQCWmqz4OyiJ9mjENYT8eIgIQWo9RzhFe4nNAaOqrNei/gD7Bx1Ut4qsLY9Z
30wMgf/t89dXLW66zaZO+mCvEMHPsgw=
=U8gx
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-20220526' of https://gitlab.com/danielhb/qemu into staging
ppc patch queue for 2022-05-26:
Most of the changes are enhancements/fixes made in TCG ppc emulation
code. Several bugs fixes were made across the board as well.
Changes include:
- tcg and target/ppc: VSX MMA implementation, fixes in helper
declarations to use call flags, memory ordering, tlbie and others
- pseries: fixed stdout-path setting with -machine graphics=off
- pseries: allow use of elf parser for kernel address
- other assorted fixes and improvements
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCYo/yvgAKCRA82cqW3gMx
# ZMeRAQCWmqz4OyiJ9mjENYT8eIgIQWo9RzhFe4nNAaOqrNei/gD7Bx1Ut4qsLY9Z
# 30wMgf/t89dXLW66zaZO+mCvEMHPsgw=
# =U8gx
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 26 May 2022 02:35:58 PM PDT
# gpg: using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164
# gpg: Good signature from "Daniel Henrique Barboza <danielhb413@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 17EB FF99 23D0 1800 AF28 3819 3CD9 CA96 DE03 3164
* tag 'pull-ppc-20220526' of https://gitlab.com/danielhb/qemu: (34 commits)
linux-user: Add PowerPC ISA 3.1 and MMA to hwcap
target/ppc: Implemented [pm]xvbf16ger2*
target/ppc: Implemented pmxvf*ger*
target/ppc: Implemented xvf16ger*
target/ppc: Implemented xvf*ger*
target/ppc: Implemented pmxvi*ger* instructions
target/ppc: Implemented xvi*ger* instructions
target/ppc: Implement xxm[tf]acc and xxsetaccz
target/ppc: Implement lwsync with weaker memory ordering
tcg/ppc: Optimize memory ordering generation with lwsync
tcg/ppc: ST_ST memory ordering is not provided with eieio
target/ppc: Fix eieio memory ordering semantics
target/ppc: declare vmsumsh[ms] helper with call flags
target/ppc: declare vmsumuh[ms] helper with call flags
target/ppc: declare vmsum[um]bm helpers with call flags
target/ppc: introduce do_va_helper
target/ppc: declare xxextractuw and xxinsertw helpers with call flags
target/ppc: declare xvxsigsp helper with call flags
target/ppc: declare xscvspdpn helper with call flags
target/ppc: Use TCG_CALL_NO_RWG_SE in fsel helper
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These are new hwcap bits added for power10.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220524140537.27451-9-lucas.araujo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Implement the following PowerISA v3.1 instructions:
xxmfacc: VSX Move From Accumulator
xxmtacc: VSX Move To Accumulator
xxsetaccz: VSX Set Accumulator to Zero
The PowerISA 3.1 mentions that for the current version of the
architecture, "the hardware implementation provides the effect of ACC[i]
and VSRs 4*i to 4*i + 3 logically containing the same data" and "The
Accumulators introduce no new logical state at this time" (page 501).
For now it seems unnecessary to create new structures, so this patch
just uses ACC[i] as VSRs 4*i to 4*i+3 and therefore move to and from
accumulators are no-ops.
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220524140537.27451-2-lucas.araujo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This allows an x86 host to no-op lwsyncs, and ppc host can use lwsync
rather than sync.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220519135908.21282-5-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
lwsync orders more than just LD_LD, importantly it matches x86 and
s390 default memory ordering.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220519135908.21282-4-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
eieio does not provide ordering between stores to CI memory and stores
to cacheable memory so it can't be used as a general ST_ST barrier.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-of-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20220519135908.21282-3-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The generated eieio memory ordering semantics do not match the
instruction definition in the architecture. Add a big comment to
explain this strange instruction and correct the memory ordering
behaviour.
Signed-off: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220519135908.21282-2-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move vmsumshm and vmsumshs to decodetree, declare vmsumshm helper with
TCG_CALL_NO_RWG, and drop the unused env argument.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517123929.284511-13-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move vmsumuhm and vmsumuhs to decodetree, declare vmsumuhm helper with
TCG_CALL_NO_RWG, and drop the unused env argument.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517123929.284511-12-matheus.ferst@eldorado.org.br>
[danielhb: added #undef VMSUMUHM to fix ppc64 build]
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move vmsumubm and vmsummbm to decodetree, declare both helpers with
TCG_CALL_NO_RWG, and drop the unused env argument.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517123929.284511-11-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move xxextractuw and xxinsertw to decodetree, declare both helpers with
TCG_CALL_NO_RWG, and drop the unused env argument.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517123929.284511-9-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move xvxsigsp to decodetree, declare helper_xvxsigsp with
TCG_CALL_NO_RWG, and drop the unused env argument.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517123929.284511-8-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move xscvspdpn to decodetree, declare helper_xscvspdpn with
TCG_CALL_NO_RWG_SE and drop the unused env argument.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517123929.284511-7-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
fsel doesn't change FPSCR and CR1 is handled by gen_set_cr1_from_fpscr,
so helper_fsel doesn't need the env argument and can be declared with
TCG_CALL_NO_RWG_SE. We also take this opportunity to move the insn to
decodetree.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517123929.284511-6-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Helpers of VSX instructions without cpu_env as an argument do not access
globals.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517123929.284511-5-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Helpers of BCD instructions only access the VSRs supplied by the
TCGv_ptr arguments, no globals are accessed.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517123929.284511-4-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Helpers of vector instructions without cpu_env as an argument do not
access globals.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517123929.284511-3-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
When writing a register from the TCTXT memory region (4th page within
the IC BAR), we were overwriting the Presentation Controller (PC)
register at the same offset. It looks like a silly cut and paste
error.
We were somehow lucky: the TCTXT registers being touched are
TCTXT_ENx/_SET/_RESET to enable physical threads and the PC registers
at the same offset are either not used by our model or the update was
harmless.
Found through code inspection.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220523151859.72283-1-fbarrat@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The bit FI fix used the sfprf flag as a flag for the set_fi parameter
in do_float_check_status where applicable. Now, this patch rename this
flag to sfifprf to state this dual usage.
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com>
Message-Id: <20220517161522.36132-4-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This patch fixes another not-so-clear situation in Power ISA
regarding the inexact bits in FPSCR. The ISA states that:
"""
When Overflow Exception is disabled (OE=0) and an
Overflow Exception occurs, the following actions are
taken:
...
2. Inexact Exception is set
XX <- 1
...
FI is set to 1
...
"""
However, when tested on a Power 9 hardware, some instructions that
trigger an OX don't set the FI bit:
xvcvdpsp(0x4050533fcdb7b95ff8d561c40bf90996) = FI: CLEARED -> CLEARED
xvnmsubmsp(0xf3c0c1fc8f3230, 0xbeaab9c5) = FI: CLEARED -> CLEARED
(just a few examples. Other instructions are also affected)
The root cause for this seems to be that only instructions that list
the bit FI in the "Special Registers Altered" should modify it.
QEMU is, today, not working like the hardware:
xvcvdpsp(0x4050533fcdb7b95ff8d561c40bf90996) = FI: CLEARED -> SET
xvnmsubmsp(0xf3c0c1fc8f3230, 0xbeaab9c5) = FI: CLEARED -> SET
(all tests assume FI is cleared beforehand)
Fix this by making float_overflow_excp() return float_flag_inexact
if it should update the inexact flags.
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com>
Message-Id: <20220517161522.36132-3-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
According to Power ISA, the FI bit in FPSCR is non-sticky.
This means that if an instruction is said to modify the FI bit, then
it should be set or cleared depending on the result of the
instruction. Otherwise, it should be kept as was before.
However, the following inconsistency was found when comparing results
from the hardware (tested on both a Power 9 processor and in
Power 10 Mambo):
(FI bit is set before the execution of the instruction)
Hardware: xscmpeqdp(0xff..ff, 0xff..ff) = FI: SET -> SET
QEMU: xscmpeqdp(0xff..ff, 0xff..ff) = FI: SET -> CLEARED
As the FI bit is non-sticky, and xscmpeqdp does not list it as a field
that is changed by the instruction, it should not be changed after its
execution.
This is happening to multiple instructions in the vsx implementations.
If the ISA does not list the FI bit as altered for a particular
instruction, then it should be kept as it was before the instruction.
QEMU is not following this behavior. Affected instructions include:
- xv* (all vsx-vector instructions);
- xscmp*, xsmax*, xsmin*;
- xstdivdp and similars;
(to identify the affected instructions, just search in the ISA for
the instructions that does not list FI in "Special Registers Altered")
Most instructions use the function do_float_check_status() to commit
changes in the inexact flag. So the fix is to add a parameter to it
that will control if the bit FI should be changed or not.
All users of do_float_check_status() are then modified to provide this
argument, controlling if that specific instruction changes bit FI or
not.
Some macro helpers are responsible for both instructions that change
and instructions that aren't suposed to change FI. This seems to always
overlap with the sfprf flag. So, reuse this flag for this purpose when
applicable.
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517161522.36132-2-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Commit 74c4912f09 changed check_tlb_flush() to use
tlb_flush_all_cpus_synced() instead of calling tlb_flush() on each
CPU. However, as side effect of this, a CPU executing a ptesync
after a tlbie will have its TLB flushed only after exiting its
current Translation Block (TB).
This causes memory accesses to invalid pages to succeed, if they
happen to be on the same TB as the ptesync.
To fix this, use tlb_flush_all_cpus() instead, that immediately
flushes the TLB of the CPU executing the ptesync instruction.
Fixes: 74c4912f09 ("target/ppc: Fix synchronization of mttcg with broadcast TLB flushes")
Signed-off-by: Leandro Lupori <leandro.lupori@eldorado.org.br>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220503163904.22575-1-leandro.lupori@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
When CONFIG_MOS6522 is not set, building ppc64-softmmu target fails:
/usr/bin/ld: libqemu-ppc64-softmmu.fa.p/monitor_misc.c.o:(.data+0x1158): undefined reference to `hmp_info_via'
Make devices configuration available in hmp-commands*.hx and check for
CONFIG_MOS6522.
Fixes: 409e9f7131 (mos6522: add "info via" HMP command for debugging)
Signed-off-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Fabiano Rosas <farosas@linux.ibm.com>
Cc: Thomas Huth <thuth@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220510235439.54775-1-muriloo@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
