Commit Graph

23 Commits

Author SHA1 Message Date
Emilio G. Cota
5cb4ef80f6 tcg/i386: implement goto_ptr
Suggested-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <1493263764-18657-6-git-send-email-cota@braap.org>
[rth: Reuse goto_ptr epilogue for exit_tb 0.]
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-05 09:25:42 -07:00
Richard Henderson
39f099ec9d tcg/i386: Always use TZCNT when available
I think this is cleaner than sometimes using BSF.

Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-17 12:02:08 -08:00
Richard Henderson
9bf38308f6 Revert "tcg/i386: Rely on undefined/undocumented behaviour of BSF/BSR"
This reverts commit 4ac7691073.

This fixes
  http://lists.nongnu.org/archive/html/qemu-devel/2017-01/msg03062.html

While I think we could get away with relying on the undocumented
behaviour, the tcg constraint system isn't powerful enough to
properly describe the required (non-)overlap conditions.

Reported-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-17 11:59:13 -08:00
Richard Henderson
993508e43e tcg/i386: Handle ctpop opcode
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10 08:49:59 -08:00
Richard Henderson
4ac7691073 tcg/i386: Rely on undefined/undocumented behaviour of BSF/BSR
The ISA manual documents the output is undefined if the input was zero.

However, we document in target-i386 that the behavior of real silicon
is to preserve the contents of the output register.  We also mention
that there are real applications that depend on this.  That this is
baked into silicon is mentioned as a potential cause for some false
sharing behaviour wrt lzcnt/tzcnt.

Taking advantage of this allows us to save 2 insns in the normal case,
and 4 insns for i686 emulating a 64-bit clz.

Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10 08:47:48 -08:00
Richard Henderson
bbf25f90ba tcg/i386: Handle ctz and clz opcodes
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10 08:47:48 -08:00
Richard Henderson
6a5aed4bdc tcg/i386: Allow bmi2 shiftx to have non-matching operands
Previously we could not have different constraints for different ISA levels,
which prevented us from eliding the matching constraint for shifts.

We do now have to make sure that the operands match for constant shifts.
We can also handle some small left shifts via lea.

Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10 08:47:48 -08:00
Richard Henderson
42d5b51492 tcg/i386: Hoist common arguments in tcg_out_op
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10 08:47:48 -08:00
Richard Henderson
cd26449a50 tcg/i386: Fuly convert tcg_target_op_def
Use a switch instead of searching a table.  Share constraints between
32-bit and 64-bit, when at all possible.

Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10 08:47:48 -08:00
Richard Henderson
069ea736b5 tcg: Pass the opcode width to target_parse_constraint
This will let us choose how to interpret a given constraint
depending on whether the opcode is 32- or 64-bit.  Which will
let us share more constraint combinations between opcodes.

At the same time, change the interface to return the advanced
pointer instead of passing it in/out by reference.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10 08:06:11 -08:00
Richard Henderson
f69d277ece tcg: Transition flat op_defs array to a target callback
This will allow the target to tailor the constraints to the
auto-detected ISA extensions.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10 08:06:11 -08:00
Richard Henderson
78fdbfb946 tcg/i386: Implement field extraction opcodes
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10 07:59:11 -08:00
Richard Henderson
ebb90a005d tcg/i386: Extend TARGET_PAGE_MASK to the proper type
TARGET_PAGE_MASK, as defined, has type "int".  We need to extend
that to the proper target width before oring in an "unsigned".

Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-09-20 11:45:30 -07:00
Pranith Kumar
a7d00d4eff tcg/i386: Add support for fence
Generate a 'lock orl $0,0(%esp)' instruction for ordering instead of
mfence which has similar ordering semantics.

Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Message-Id: <20160714202026.9727-3-bobby.prani@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-09-16 08:12:11 -07:00
Richard Henderson
85aa80813d tcg: Support arbitrary size + alignment
Previously we allowed fully unaligned operations, but not operations
that are aligned but with less alignment than the operation size.

In addition, arm32, ia64, mips, and sparc had been omitted from the
previous overalignment patch, which would have led to that alignment
being enforced.

Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-09-16 08:12:06 -07:00
Sergey Sorokin
1f00b27f17 tcg: Improve the alignment check infrastructure
Some architectures (e.g. ARMv8) need the address which is aligned
to a size more than the size of the memory access.
To support such check it's enough the current costless alignment
check implementation in QEMU, but we need to support
an alignment size specifying.

Signed-off-by: Sergey Sorokin <afarallax@yandex.ru>
Message-Id: <1466705806-679898-1-git-send-email-afarallax@yandex.ru>
Signed-off-by: Richard Henderson <rth@twiddle.net>
[rth: Assert in tcg_canonicalize_memop.  Leave get_alignment_bits
available for, though unused by, user-mode.  Retain logging difference
based on ALIGNED_ONLY.]
2016-07-05 20:50:13 -07:00
Richard Henderson
59d7c14eef tcg: Optimize spills of constants
While we can store constants via constrants on INDEX_op_st_i32 et al,
we weren't able to spill constants to backing store.

Add a new backend interface, tcg_out_sti, which may store the constant
(and is allowed to fail).  Rearrange the temp_* helpers so that we only
attempt to directly store a constant when the temp is becoming dead/free.

Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-07-05 20:50:13 -07:00
Sergey Fedorov
f309101c26 tcg: Clean up direct block chaining data fields
Briefly describe in a comment how direct block chaining is done. It
should help in understanding of the following data fields.

Rename some fields in TranslationBlock and TCGContext structures to
better reflect their purpose (dropping excessive 'tb_' prefix in
TranslationBlock but keeping it in TCGContext):
   tb_next_offset  =>  jmp_reset_offset
   tb_jmp_offset   =>  jmp_insn_offset
   tb_next         =>  jmp_target_addr
   jmp_next        =>  jmp_list_next
   jmp_first       =>  jmp_list_first

Avoid using a magic constant as an invalid offset which is used to
indicate that there's no n-th jump generated.

Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-05-12 14:06:41 -10:00
Sergey Fedorov
0d07abf05e tcg/i386: Make direct jump patching thread-safe
Ensure direct jump patching in i386 is atomic by:
 * naturally aligning a location of direct jump address;
 * using atomic_read()/atomic_set() for code patching.

tcg_out_nopn() implementation:
Suggested-by: Richard Henderson <rth@twiddle.net>.

Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Message-Id: <1461341333-19646-6-git-send-email-sergey.fedorov@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-05-12 14:06:41 -10:00
Aurelien Jarno
8d8fdbae01 tcg: check for CONFIG_DEBUG_TCG instead of NDEBUG
Check for CONFIG_DEBUG_TCG instead of NDEBUG, drop now useless code.

Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: 1461228530-14852-2-git-send-email-aurelien@aurel32.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-04-21 15:43:20 +01:00
Aurelien Jarno
eabb7b91b3 tcg: use tcg_debug_assert instead of assert (fix performance regression)
The TCG code is quite performance sensitive, but at the same time can
also be quite tricky. That is why asserts that can be enabled with the
--enable-debug-tcg configure option.

This used to work the following way:

| #include "config.h"
|
| ...
|
| #if !defined(CONFIG_DEBUG_TCG) && !defined(NDEBUG)
| /* define it to suppress various consistency checks (faster) */
| #define NDEBUG
| #endif
|
| ...
|
| #include <assert.h>

Since commit 757e725b (tcg: Clean up includes) "config.h" as been
replaced by "qemu/osdep.h" which itself includes <assert.h>. As a
consequence the assertions are always enabled, even when using
--disable-debug-tcg, causing a performance regression, especially on
targets with many registers. For instance on qemu-system-ppc the
speed difference is about 15%.

tcg_debug_assert is controlled directly by CONFIG_DEBUG_TCG and already
uses in some places. This patch replaces all the calls to assert into
calss to tcg_debug_assert.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: 1461228530-14852-1-git-send-email-aurelien@aurel32.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-04-21 15:41:47 +01:00
Peter Maydell
c3b7f66800 tcg: Remove unnecessary osdep.h includes from tcg-target.inc.c
Commit 757e725b58 added a number of #include "qemu/osdep.h"
files to the tcg-target.c files (as they were named at the time).
These are unnecessary because these files are not standalone C
files, and the tcg/tcg.c file which includes them will have
already included osdep.h on their behalf. Remove the unneeded
include directives.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1456238983-10160-4-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-02-23 08:31:03 -08:00
Peter Maydell
ce15110981 tcg: Rename tcg-target.c to tcg-target.inc.c
Rename the per-architecture tcg-target.c files to tcg-target.inc.c.
This makes it clearer that they are not intended to be standalone
C files, but are instead #included into another source file.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1456238983-10160-2-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-02-23 08:30:38 -08:00