Commit Graph

530 Commits

Author SHA1 Message Date
Stefan Hajnoczi 1322629b4f net: replace net_client_init1() netdev whitelist with blacklist
It's cumbersome to keep the whitelist up-to-date.  New netdev backends
should most likely be allowed so a blacklist makes more sense than a
whitelist.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 1432743412-15943-3-git-send-email-stefanha@redhat.com
2015-06-24 16:30:29 +01:00
Stefan Hajnoczi 027a247bbf net: add missing "netmap" to host_net_devices[]
Although hmp-commands.hx lists "netmap" as a valid host_net_add type,
the command rejects it because it's missing from the list.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1432743412-15943-2-git-send-email-stefanha@redhat.com
2015-06-24 16:29:07 +01:00
Markus Armbruster a0b1a66ea3 Include monitor/monitor.h exactly where needed
In particular, don't include it into headers.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:41 +02:00
Markus Armbruster cc7a8ea740 Include qapi/qmp/qerror.h exactly where needed
In particular, don't include it into headers.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:41 +02:00
Markus Armbruster d49b683644 qerror: Move #include out of qerror.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:40 +02:00
Markus Armbruster 485febc6d1 qmp: Wean off qerror_report()
The traditional QMP command handler interface

    int qmp_FOO(Monitor *mon, const QDict *params, QObject **ret_data);

doesn't provide for returning an Error object.  Instead, the handler
is expected to stash it in the monitor with qerror_report().

When we rebased QMP on top of QAPI, we didn't change this interface.
Instead, commit 776574d introduced "middle mode" as a temporary aid
for converting existing QMP commands to QAPI one by one.  More than
three years later, we're still using it.

Middle mode has two effects:

* Instead of the native input marshallers

      static void qmp_marshal_input_FOO(QDict *, QObject **, Error **)

  it generates input marshallers conforming to the traditional QMP
  command handler interface.

* It suppresses generation of code to register them with
  qmp_register_command()

  This permits giving them internal linkage.

As long as we need qmp-commands.hx, we can't use the registry behind
qmp_register_command(), so the latter has to stay for now.

The former has to go to get rid of qerror_report().  Changing all QMP
commands to fit the QAPI mold in one go was impractical back when we
started, but by now there are just a few stragglers left:
do_qmp_capabilities(), qmp_qom_set(), qmp_qom_get(), qmp_object_add(),
qmp_netdev_add(), do_device_add().

Switch middle mode to generate native input marshallers, and adapt the
stragglers.  Simplifies both the monitor code and the stragglers.

Rename do_qmp_capabilities() to qmp_capabilities(), and
do_device_add() to qmp_device_add, because that's how QMP command
handlers are named today.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:40 +02:00
Markus Armbruster c6bd8c706a qerror: Clean up QERR_ macros to expand into a single string
These macros expand into error class enumeration constant, comma,
string.  Unclean.  Has been that way since commit 13f59ae.

The error class is always ERROR_CLASS_GENERIC_ERROR since the previous
commit.

Clean up as follows:

* Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and
  delete it from the QERR_ macro.  No change after preprocessing.

* Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into
  error_setg(...).  Again, no change after preprocessing.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:40 +02:00
Markus Armbruster 75158ebbe2 qerror: Eliminate QERR_DEVICE_NOT_FOUND
Error classes other than ERROR_CLASS_GENERIC_ERROR should not be used
in new code.  Hiding them in QERR_ macros makes new uses hard to spot.
Fortunately, there's just one such macro left.  Eliminate it with this
coccinelle semantic patch:

    @@
    expression EP, E;
    @@
    -error_set(EP, QERR_DEVICE_NOT_FOUND, E)
    +error_set(EP, ERROR_CLASS_DEVICE_NOT_FOUND, "Device '%s' not found", E)

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:39 +02:00
Markus Armbruster 70b9433109 QemuOpts: Wean off qerror_report_err()
qerror_report_err() is a transitional interface to help with
converting existing monitor commands to QMP.  It should not be used
elsewhere.

The only remaining user in qemu-option.c is qemu_opts_parse().  Is it
used in QMP context?  If not, we can simply replace
qerror_report_err() by error_report_err().

The uses in qemu-img.c, qemu-io.c, qemu-nbd.c and under tests/ are
clearly not in QMP context.

The uses in vl.c aren't either, because the only QMP command handlers
there are qmp_query_status() and qmp_query_machines(), and they don't
call it.

Remaining uses:

* drive_def(): Command line -drive and such, HMP drive_add and pci_add

* hmp_chardev_add(): HMP chardev-add

* monitor_parse_command(): HMP core

* tmp_config_parse(): Command line -tpmdev

* net_host_device_add(): HMP host_net_add

* net_client_parse(): Command line -net and -netdev

* qemu_global_option(): Command line -global

* vnc_parse_func(): Command line -display, -vnc, default display, HMP
  change, QMP change.  Bummer.

* qemu_pci_hot_add_nic(): HMP pci_add

* usb_net_init(): Command line -usbdevice, HMP usb_add

Propagate errors through qemu_opts_parse().  Create a convenience
function qemu_opts_parse_noisily() that passes errors to
error_report_err().  Switch all non-QMP users outside tests to it.

That leaves vnc_parse_func().  Propagate errors through it.  Since I'm
touching it anyway, rename it to vnc_parse().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:39 +02:00
Peter Maydell 89e9429c3c virtio, pci fixes, enhancements
Most notably this includes virtio cross-endian patches.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJVg+xdAAoJECgfDbjSjVRp6AAH/3ILznMtvJZjQ/WOjLEsL13M
 +0cYEM1LI6LbLhqeruQVVcY9/hx61yHxZMoLkVg/I2po7F4HDNI2vo5Y7eGx+xN0
 5rlcAw9/ZQ6SkCVmjN/VZfISW5mSqCaKH8gNzu8AigjsryJSj5iDXv1YJimwsF+5
 cgCerhLIVvEkXmNj1ChwR+fz1IgFzJ8TRaZ0N2glxLyVjgKS57diqZF3Rbg2DdQl
 BPbekbbtxesPgmKRvtarbhjx26TlnP1YShjhWA5r72gBNlqblLDycpaIGXr34b3a
 sLIZjxzQtTEGcaGtkifMgazyK3rY3JmzOshD0onFOWY1r6Abxuj7eTZOEE6JQXk=
 =tju/
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio, pci fixes, enhancements

Most notably this includes virtio cross-endian patches.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Fri Jun 19 11:18:05 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream:
  vhost: enable vhost without without MSI-X
  pci: Don't register a specialized 'config_write' if default behavior is intended
  hw/core: rebase sysbus_get_fw_dev_path() to g_strdup_printf()
  vhost_net: re-enable when cross endian
  vhost-net: tell tap backend about the vnet endianness
  tap: fix non-linux build
  tap: add VNET_LE/VNET_BE operations
  vhost: set vring endianness for legacy virtio
  virtio: introduce virtio_legacy_is_cross_endian()
  linux-headers: sync vhost.h
  vhost-user: part of virtio

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-19 11:30:57 +01:00
Pankaj Gupta 1e7398a140 vhost: enable vhost without without MSI-X
We use vhostforce to enable vhost even if Guests don't have MSI-X
support and we fall back to QEMU virtio-net.

This gives a very small performance gain, but the disadvantage
is that guest now controls which virtio code is running
(qemu or vhost) so our attack surface is doubled.

This patch will enable vhost unconditionally whenever it's requested.
For compatibility, enable vhost when vhostforce is set, as well.

Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
2015-06-19 12:17:49 +02:00
Michael S. Tsirkin 4ee9b43be9 tap: fix non-linux build
tap_fd_set_vnet_le/tap_fd_set_vnet_be was missing,
fix it up.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
2015-06-19 12:17:25 +02:00
Greg Kurz c80cd6bb9c tap: add VNET_LE/VNET_BE operations
The linux tap and macvtap backends can be told to parse vnet headers
according to little or big endian. This is done through the TUNSETVNETLE
and TUNSETVNETBE ioctls.

This patch brings all the plumbing for QEMU to use these APIs.

Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-17 17:12:54 +02:00
Fam Zheng 82e1cc4bf9 Change qemu_set_fd_handler2(..., NULL, ...) to qemu_set_fd_handler
Done with following Coccinelle semantic patch, plus manual cosmetic changes in
net/*.c.

    @@
    expression E1, E2, E3, E4;
    @@
    -   qemu_set_fd_handler2(E1, NULL, E2, E3, E4);
    +   qemu_set_fd_handler(E1, E2, E3, E4);

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1433400324-7358-8-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-12 13:26:21 +01:00
Fam Zheng a90a7425cf tap: Drop tap_can_send
This callback is called by main loop before polling s->fd, if it returns
false, the fd will not be polled in this iteration.

This is redundant with checks inside read callback. After this patch,
the data will be sent to peer when it arrives. If the device can't
receive, it will be queued to incoming_queue, and when the device status
changes, this queue will be flushed.

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1433400324-7358-7-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-12 13:26:21 +01:00
Fam Zheng 6e99c631f1 net/socket: Drop net_socket_can_send
This callback is called by main loop before polling s->fd, if it returns
false, the fd will not be polled in this iteration.

This is redundant with checks inside read callback. After this patch,
the data will be sent to peer when it arrives. If the device can't
receive, it will be queued to incoming_queue, and when the device status
changes, this queue will be flushed.

If the peer is not ready, disable the read poll until send completes.

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1433400324-7358-6-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-12 13:26:21 +01:00
Fam Zheng e8dd1d9c39 netmap: Drop netmap_can_send
This callback is called by main loop before polling s->fd, if it returns
false, the fd will not be polled in this iteration.

This is redundant with checks inside read callback. After this patch,
the data will be copied from s->fd to s->iov when it arrives. If the
device can't receive, it will be queued to incoming_queue, and when the
device status changes, this queue will be flushed.

Also remove the qemu_can_send_packet() check in netmap_send. If it's
true, we are good; if it's false, the qemu_sendv_packet_async would
return 0 and read poll will be disabled until netmap_send_completed is
called.

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1433400324-7358-5-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-12 13:26:21 +01:00
Fam Zheng 95b1416ae9 l2tpv3: Drop l2tpv3_can_send
This callback is called by main loop before polling s->fd, if it returns
false, the fd will not be polled in this iteration.

This is redundant with checks inside read callback. After this patch,
the data will be copied from s->fd to s->msgvec when it arrives. If the
device can't receive, it will be queued to incoming_queue, and when the
device status changes, this queue will be flushed.

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1433400324-7358-4-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-12 13:26:21 +01:00
Markus Armbruster 8190483196 vhost-user: Improve -netdev/netdev_add/-net/... error reporting
When -netdev vhost-user fails, it first reports a specific error, then
one or more generic ones, like this:

    $ qemu-system-x86_64 -netdev vhost-user,id=foo,chardev=xxx
    qemu-system-x86_64: -netdev vhost-user,id=foo,chardev=xxx: chardev "xxx" not found
    qemu-system-x86_64: -netdev vhost-user,id=foo,chardev=xxx: No suitable chardev found
    qemu-system-x86_64: -netdev vhost-user,id=foo,chardev=xxx: Device 'vhost-user' could not be initialized

With the command line, the messages go to stderr.  In HMP, they go to
the monitor.  In QMP, the last one becomes the error reply, and the
others go to stderr.

Convert net_init_vhost_user() and its helpers to Error.  This
suppresses the unwanted unspecific error messages, and makes the
specific error the QMP error reply.

Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-09 07:40:24 +02:00
Markus Armbruster 71df1d8337 QemuOpts: Convert qemu_opt_foreach() to Error
Retain the function value for now, to permit selective conversion of
its callers.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2015-06-09 07:40:23 +02:00
Markus Armbruster 1640b200d5 QemuOpts: Drop qemu_opt_foreach() parameter abort_on_failure
When the argument is non-zero, qemu_opt_foreach() stops on callback
returning non-zero, and returns that value.

When the argument is zero, it doesn't stop, and returns the callback's
value from the last iteration.

The two callers that pass zero could just as well pass one:

* qemu_spice_init()'s callback add_channel() either returns zero or
  exit()s.

* config_write_opts()'s callback config_write_opt() always returns
  zero.

Drop the parameter, and always stop.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2015-06-09 07:40:23 +02:00
Markus Armbruster 28d0de7a4f QemuOpts: Convert qemu_opts_foreach() to Error
Retain the function value for now, to permit selective conversion of
its callers.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
2015-06-09 07:37:37 +02:00
Markus Armbruster a4c7367f7d QemuOpts: Drop qemu_opts_foreach() parameter abort_on_failure
When the argument is non-zero, qemu_opts_foreach() stops on callback
returning non-zero, and returns that value.

When the argument is zero, it doesn't stop, and returns the bit-wise
inclusive or of all the return values.  Funky :)

The callers that pass zero could just as well pass one, because their
callbacks can't return anything but zero:

* qemu_add_globals()'s callback qdev_add_one_global()

* qemu_config_write()'s callback config_write_opts()

* main()'s callbacks default_driver_check(), drive_enable_snapshot(),
  vnc_init_func()

Drop the parameter, and always stop.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
2015-06-08 19:33:20 +02:00
Michael Tokarev 8b8f1c7e9d slirp: use less predictable directory name in /tmp for smb config (CVE-2015-4037)
In this version I used mkdtemp(3) which is:

        _BSD_SOURCE
        || /* Since glibc 2.10: */
            (_POSIX_C_SOURCE >= 200809L || _XOPEN_SOURCE >= 700)

(POSIX.1-2008), so should be available on systems we care about.

While at it, reset the resulting directory name within smb structure
on error so cleanup function wont try to remove directory which we
failed to create.

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
2015-06-03 14:21:45 +03:00
Ouyang Changchun 830d70db69 vhost-user: add multi queue support
Based on patch by Nikolay Nikolaev:
Vhost-user will implement the multi queue support in a similar way
to what vhost already has - a separate thread for each queue.
To enable the multi queue functionality - a new command line parameter
"queues" is introduced for the vhost-user netdev.

Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-01 14:18:55 +02:00
Shannon Zhao 2bc22a58e1 net/net: Record usage status of mac address
Currently QEMU dynamically generates mac address for the NIC which
doesn't specify the mac address. But when we hotplug a NIC without
specifying mac address, the mac address will increase for the same NIC
along with hotplug and hot-unplug, and at last it will overflow. And if
we codeplug one NIC with mac address e.g. "52:54:00:12:34:56", then
hotplug one NIC without specifying mac address and the mac address of
the hotplugged NIC is duplicate of "52:54:00:12:34:56".

This patch add a mac_table to record the usage status and free the mac
address when the NIC is unrealized.

Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27 10:34:07 +01:00
Markus Armbruster a308817743 tap: Improve -netdev/netdev_add/-net/... tap error reporting
When -netdev tap fails, it first reports a specific error, then a
generic one, like this:

    $ qemu-system-x86_64 -netdev tap,id=foo
    qemu-system-x86_64: -netdev tap,id=foo: could not configure /dev/net/tun: Operation not permitted
    qemu-system-x86_64: -netdev tap,id=foo: Device 'tap' could not be initialized

With the command line, the messages go to stderr.  In HMP, they go to
the monitor.  In QMP, the second one becomes the error reply, and the
first one goes to stderr.

Convert net_init_tap() to Error.  This suppresses the unwanted second
message, and makes the specific error the QMP error reply.

[Dropped duplicate "and" from error message as suggested by Eric Blake:
"ifname=, script=, downscript=, and vnet_hdr=, "
"queues=, and vhostfds= are invalid with helper="
--Stefan]

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-16-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27 10:34:07 +01:00
Markus Armbruster 95c35a74fe tap: Finish conversion of tap_open() to Error
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-15-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27 10:34:07 +01:00
Markus Armbruster 576c6eb670 tap-solaris: Convert tap_open() to Error
Fixes inappropriate use of syslog().

Not fixed: leaks on error paths, suspicious non-fatal errors.  FIXMEs
added instead.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-14-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27 10:34:07 +01:00
Markus Armbruster 4bce487e14 tap-bsd: Convert tap_open() to Error
Fixes inappropriate use of stderr in monitor command handler.

While there, improve some of the messages a bit.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-13-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27 10:34:07 +01:00
Markus Armbruster 47896e2fd3 tap-linux: Convert tap_open() to Error
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-12-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27 10:34:07 +01:00
Markus Armbruster 468dd82408 tap: Permit incremental conversion of tap_open() to Error
Convert the trivial ones immediately: tap-aix and tap-haiku.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-11-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27 10:34:07 +01:00
Markus Armbruster ac4fcf5639 tap: Convert launch_script() to Error
Fixes inappropriate use of stderr in monitor command handler.

While there, improve the messages some.

[Fixed Error **err -> Error *err local variable that broke the build.
--Stefan]

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-10-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27 10:33:35 +01:00
Markus Armbruster 445f116cab tap: Convert net_init_tap_one() to Error
[Dropped %s from "tap: open vhost char device failed: %s" since
error_setg_errno() already prints a human-readable error string and
there is no format string argument.
--Stefan]

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-9-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27 09:51:05 +01:00
Markus Armbruster 80b832c300 tap: Convert tap_set_sndbuf() to Error
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-8-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27 09:51:05 +01:00
Markus Armbruster a8a21be985 tap: Improve -netdev/netdev_add/-net/... bridge error reporting
When -netdev bridge fails, it first reports a specific error, then a
generic one, like this:

    $ qemu-system-x86_64 -netdev bridge,id=foo
    failed to launch bridge helper
    qemu-system-x86_64: -netdev bridge,id=foo: Device 'bridge' could not be initialized

The first message goes to stderr.  Wrong for HMP, because errors need
to go to the monitor there.

The second message goes to stderr for -netdev, to the monitor for HMP
netdev_add, and becomes the error reply for QMP netdev_add.

Convert net_bridge_run_helper() to Error, and propagate its errors
through net_init_bridge().  This ensures the error gets reported where
the user is, and suppresses the unwanted second message.

While there, improve the error messages a bit.

The above example becomes:

    $ qemu-system-x86_64 -netdev bridge,id=foo
    qemu-system-x86_64: -netdev bridge,id=foo: bridge helper failed

net_init_tap() also uses net_bridge_run_helper().  Propagate its
errors there as well.  Improves reporting these errors with -netdev
tap & friends.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-7-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27 09:51:05 +01:00
Markus Armbruster da4a4eac26 tap: net_tap_fd_init() can't fail, drop dead error handling
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-6-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27 09:51:05 +01:00
Markus Armbruster 3791f83ca9 net/dump: Improve -net/host_net_add dump error reporting
When -net dump fails, it first reports a specific error, then a
generic one, like this:

    $ qemu-system-x86_64 -net dump,id=foo,file=/eperm
    qemu-system-x86_64: -net dump,id=foo,file=/eperm: -net dump: can't open /eperm
    qemu-system-x86_64: -net dump,id=foo,file=/eperm: Device 'dump' could not be initialized

Convert net_init_tap() to Error.  This suppresses the unwanted second
message.

Improve the error messages to include strerror(errno) where
appropriate.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-5-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27 09:51:05 +01:00
Markus Armbruster 6630886863 net: Improve -net nic error reporting
When -net nic fails, it first reports a specific error, then a generic
one, like this:

    $ qemu-system-x86_64 -net nic,netdev=nonexistent
    qemu-system-x86_64: -net nic,netdev=nonexistent: netdev 'nonexistent' not found
    qemu-system-x86_64: -net nic,netdev=nonexistent: Device 'nic' could not be initialized

Convert net_init_nic() to Error to get rid of the unwanted second
error message.

While there, tidy up an Overcapitalized Error Message.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-4-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27 09:51:05 +01:00
Markus Armbruster a30ecde6e7 net: Permit incremental conversion of init functions to Error
Error reporting for netdev_add is broken: the net_client_init_fun[]
report the actual errors with (at best) error_report(), and their
caller net_client_init1() makes up a generic error on top.

For command line and HMP, this produces an mildly ugly error cascade.

In QMP, the actual errors go to stderr, and the generic error becomes
the command's error reply.

To fix this, we need to convert the net_client_init_fun[] to Error.

To permit fixing them one by one, add an Error ** parameter to the
net_client_init_fun[].  If the call fails without returning an Error,
make up the same generic Error as before.  But if it returns one, use
that instead.  Since none of them does so far, no functional change.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-3-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27 09:51:04 +01:00
Markus Armbruster ca7eb1848b net: Improve error message for -net hubport a bit
Type "hubport" is valid only with -netdev.  Unfortunately, that's
detected late and the error message doesn't explain why:

    $ qemu-system-i386 -net hubport,id=foo,hubid=0
    qemu-system-i386: -net hubport,id=foo,hubid=0: Device 'hubport' could not be initialized

Improve the error message to "Parameter 'type' expects a net type".

Not fixed: -net hubport without the parameters required by -netdev
hubport still asks for those parameters:

    $ qemu-system-i386 -net hubport
    qemu-system-i386: -net hubport: Parameter 'hubid' is missing

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-2-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27 09:51:04 +01:00
Scott Feldman 890ee6abb3 net: add MAC address string printer
We can use this in virtio-net code as well as new Rocker driver code, so
up-level this.

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1426306173-24884-2-git-send-email-sfeldma@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-11 14:49:03 +01:00
Paolo Bonzini 7fb439115d net: synchronize net_host_device_remove with host_net_remove_completion
Using net_host_check_device is unnecessary.  qemu_del_net_client asserts
for the non-peer case that it can only process NIC type NetClientStates,
and that assertion is valid for the peered case as well, so move it and
use the same check in net_host_device_remove.  host_net_remove_completion
is already checking the type.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Message-id: 1419353600-30519-2-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-12 19:59:39 +00:00
Gonglei c65476612a vhost: Remove superfluous '\n' around error_report()
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-10 08:15:33 +03:00
Peter Maydell 0048fa6c80 pci, pc, virtio fixes and cleanups
A bunch of fixes all over the place.
 All of ACPI refactoring has been merged.
 Legacy pci commands have been dropped.
 virtio header cleanup
 initial patches from virtio-1.0 branch
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJU/CoXAAoJECgfDbjSjVRpX7EH/RMmgtsDO4wvqJu++lHvkB/q
 kSaXZYTpJTo0i5JE7n2brwuXA4902tTg9g5TMUpGPh9Pt2QRg7RTgGC1vqZyOBos
 MPw+4BO2v66S6qgX7bOf222z7r64cHTY7pLkQlrfD4usPlu2eusZ64UTW6Ru51fW
 WF9E9aunbl+HnuCGq6Iez3sCLscTBJpU/lEr6oSyHhuq3aa0CjjraEeV0E/QcwJG
 HTUeFymL8NFvlXZblsLI++VOv7Mxpi6yiCQ5XoKpFgGMvidwo41Aso6gB3ySGxOd
 w8O3Nbu77Iw/StDRNCg/5/GapabMKh2bE4UCsYY5OS63ZtD0fl0CCblhzm/ZFPw=
 =LY/j
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pci, pc, virtio fixes and cleanups

A bunch of fixes all over the place.
All of ACPI refactoring has been merged.
Legacy pci commands have been dropped.
virtio header cleanup
initial patches from virtio-1.0 branch

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

* remotes/mst/tags/for_upstream: (130 commits)
  acpi: drop unused code
  aml-build: comment fix
  acpi-build: fix typo in comment
  acpi: update generated files
  vhost user:support vhost user nic for non msi guests
  aml-build: fix build for glib < 2.22
  acpi: update generated files
  Makefile.target: binary depends on config-devices
  acpi-test-data: update after pci rewrite
  acpi, mem-hotplug: use PC_DIMM_SLOT_PROP in acpi_memory_plug_cb().
  pci-hotplug-old: Has been dead for five major releases, bury
  pci: Give a few helpers internal linkage
  acpi: make build_*() routines static to aml-build.c
  pc: acpi: remove not used anymore ssdt-[misc|pcihp].hex.generated blobs
  pc: acpi-build: drop template patching and create PCI bus tree dynamically
  tests: ACPI: update pc/SSDT.bridge due to new alg of PCI tree creation
  pc: acpi-build: simplify PCI bus tree generation
  tests: add ACPI blobs for qemu with bridge cases
  tests: bios-tables-test: add support for testing bridges
  tests: ACPI test blobs update due to PCI0._CRS changes
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Conflicts:
	hw/pci/pci-hotplug-old.c
2015-03-09 09:14:28 +00:00
Haifeng Gao 24f938a682 vhost user:support vhost user nic for non msi guests
Currently, vhost user nic doesn't support non msi guests(like pxe stage) by default.
Vhost user nic can't fall back to qemu like normal vhost net nic does. So we should
enable it for non msi guests.

Signed-off-by: Haifeng Gao <gaohaifeng.gao@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-03-03 17:55:36 +01:00
Markus Armbruster f43e47dbf6 QemuOpts: Drop qemu_opt_set(), rename qemu_opt_set_err(), fix use
qemu_opt_set() is a wrapper around qemu_opt_set() that reports the
error with qerror_report_err().

Most of its users assume the function can't fail.  Make them use
qemu_opt_set_err() with &error_abort, so that should the assumption
ever break, it'll break noisily.

Just two users remain, in util/qemu-config.c.  Switch them to
qemu_opt_set_err() as well, then rename qemu_opt_set_err() to
qemu_opt_set().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2015-02-26 14:49:31 +01:00
Markus Armbruster 79087c782e QemuOpts: Convert qemu_opts_set() to Error, fix its use
Return the Error object instead of reporting it with
qerror_report_err().

Change callers that assume the function can't fail to pass
&error_abort, so that should the assumption ever break, it'll break
noisily.

Turns out all callers outside its unit test assume that.  We could
drop the Error ** argument, but that would make the interface less
regular, so don't.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2015-02-26 14:47:49 +01:00
Peter Maydell c5c6d7f81a Clean up around error_get_pretty(), qerror_report_err()
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJU5GT/AAoJEDhwtADrkYZT6H8QAJSdCnymglYhsJ0L8Pn+mFbw
 ukAxSBjZ+XJXwSBCjSLB9e2Tb6PJZAbAdQJjmI1Ijb+3cXqjRURErTsp+Caz1pjj
 Zw4v4whxNedXl+WeZEwX7sU6WlDhMEk51E1NHssd9dyZ/noEqHiw/XzoqimaYlPK
 nrSTBZ94N+F+Daw1d/cjbRMHHGVSjpVraDEPvZIkC6Mv43dGhSdCT529FXthMpUd
 OhoaQvEdy/75RqFwd4gbjHzA2qHVVsKdq8EfDdHAlcg2LSGB8zM4LlRmYxMKmy2g
 ylZLXtm6v7Pm+tYFVdLc7xWnRIh4vFXBHFJ8O9jFXziV4Nkj7s7qXdLJXxYWfRXU
 KC4/vw9IEkHWWUtn1A69ktyPFjEcnW0ieiEOA7/2FXiH7RARnWTl/YChlQrSgSAM
 zh+/01UhHvKBkxmkJIWpHzR+70A/GyubvlrcSd0g6L+g1hXEw78aryivCoFTKocl
 MNTlI7AcaGW2qpSUn5kr99aBdKD1sSdGPbNqqZMOzUekGQHeUuNNrFlvsTibMo5G
 OikdrgygmoLHBcMCgVykYoHen5lMcz+PS5aGFoGwvMV3DQZAsAwltXGeJSNck143
 WuEatwA0PhuA0S/dZMELC27kUdsbvpBUhboHuShz4pvytihWu0HmVAWDeShd9uPB
 r/WSqvETUcdSOqExGEP2
 =g7dZ
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2015-02-18' into staging

Clean up around error_get_pretty(), qerror_report_err()

# gpg: Signature made Wed Feb 18 10:10:07 2015 GMT using RSA key ID EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>"

* remotes/armbru/tags/pull-error-2015-02-18:
  qemu-char: Avoid qerror_report_err() outside QMP command handlers
  qemu-img: Avoid qerror_report_err() outside QMP command handlers
  vl: Avoid qerror_report_err() outside QMP command handlers
  tpm: Avoid qerror_report_err() outside QMP command handlers
  numa: Avoid qerror_report_err() outside QMP command handlers
  net: Avoid qerror_report_err() outside QMP command handlers
  monitor: Avoid qerror_report_err() outside QMP command handlers
  monitor: Clean up around monitor_handle_fd_param()
  error: Use error_report_err() where appropriate
  error: New convenience function error_report_err()
  vhost-scsi: Improve error reporting for invalid vhostfd

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-02-26 07:01:08 +00:00
Markus Armbruster 1ce6be24df hmp: Name HMP info handler functions hmp_info_SUBCOMMAND()
Some are called do_info_SUBCOMMAND() (old ones, usually), some
hmp_info_SUBCOMMAND(), some SUBCOMMAND_info(), sometimes SUBCOMMAND
pointlessly differs in spelling.

Normalize to hmp_info_SUBCOMMAND(), where SUBCOMMAND is exactly the
subcommand name with '-' replaced by '_'.

Exceptions:

* sun4m_irq_info(), sun4m_pic_info() renamed to sun4m_hmp_info_irq(),
  sun4m_hmp_info_pic().

* lm32_irq_info(), lm32_pic_info() renamed to lm32_hmp_info_irq(),
  lm32_hmp_info_pic().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-02-18 11:58:50 +01:00
Markus Armbruster 3e5a50d64c hmp: Name HMP command handler functions hmp_COMMAND()
Some are called do_COMMAND() (old ones, usually), some hmp_COMMAND(),
and sometimes COMMAND pointlessly differs in spelling.

Normalize to hmp_COMMAND(), where COMMAND is exactly the command name
with '-' replaced by '_'.

Exceptions:

* do_device_add() and client_migrate_info() *not* renamed to
  hmp_device_add(), hmp_client_migrate_info(), because they're also
  QMP handlers.  They still need to be converted to QAPI.

* do_memory_dump(), do_physical_memory_dump(), do_ioport_read(),
  do_ioport_write() renamed do hmp_* instead of hmp_x(), hmp_xp(),
  hmp_i(), hmp_o(), because those names are too cryptic for my taste.

* do_info_help() renamed to hmp_info_help() instead of hmp_info(),
  because it only covers help.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-02-18 11:58:30 +01:00
Markus Armbruster 12d0cc2db9 net: Avoid qerror_report_err() outside QMP command handlers
qerror_report_err() is a transitional interface to help with
converting existing monitor commands to QMP.  It should not be used
elsewhere.  Replace by error_report_err() in HMP command handler
hmp_host_net_add() and initial startup helpers net_init_client(),
net_init_netdev().  Keep it in QMP command handler qmp_netdev_add().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2015-02-18 10:51:36 +01:00
Markus Armbruster 1677f4c66c monitor: Clean up around monitor_handle_fd_param()
monitor_handle_fd_param() is a wrapper around
monitor_handle_fd_param2() that feeds errors to qerror_report_err()
instead of returning them.  qerror_report_err() is inappropriate in
many contexts.  monitor_handle_fd_param() looks simpler than
monitor_handle_fd_param2(), which tempts use.  Remove the temptation:
drop the wrapper and open-code the (trivial) error handling instead.

Replace the open-coded qerror_report_err() by error_report_err() in
places that already use error_report().  Turns out that's everywhere.

While there, rename monitor_handle_fd_param2() to monitor_fd_param().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2015-02-18 10:51:28 +01:00
Jason Wang 64a55d6066 net: del hub port when peer is deleted
We should del hub port when peer is deleted since it will not be reused
and will only be freed during exit.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-id: 1422860798-17495-3-git-send-email-jasowang@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-06 14:06:44 +00:00
Jason Wang 07636d5399 net: remove the wrong comment in net_init_hubport()
Not only nic could be the one to peer.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-id: 1422860798-17495-2-git-send-email-jasowang@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-06 14:06:44 +00:00
Jason Wang a6efd6ae7b monitor: print hub port name during info network
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-id: 1422860798-17495-1-git-send-email-jasowang@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-06 14:06:44 +00:00
Markus Armbruster 58889fe50a net: Use g_new() & friends where that makes obvious sense
g_new(T, n) is neater than g_malloc(sizeof(T) * n).  It's also safer,
for two reasons.  One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.

This commit only touches allocations with size arguments of the form
sizeof(T).

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-12-19 13:17:02 +00:00
Markus Armbruster 71e28e3cc2 net: Fuse g_malloc(); memset() into g_new0()
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-12-19 13:17:02 +00:00
Wangkai (Kevin,C) 756ae78b27 tap: fix vcpu long time io blocking on tap
[Adjusted doc comment for grammar.
--Stefan]

Signed-off-by: Wangkai <wangkai86@huawei.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-12-19 11:19:22 +00:00
Gonglei 8db804ac41 net/socket: fix Uninitialized scalar variable
If is_connected parameter is false, the saddr
variable will no initialize. Coverity report:
uninit_use: Using uninitialized value saddr.sin_port.

We don't need add saddr information to nc->info_str
when is_connected is false.

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-11-21 10:50:54 +00:00
Gonglei 7a8919dc29 net/slirp: fix memory leak
commit b412eb61 introduce 'cmd:' target for guestfwd,
and fwd don't be used in this scenario, and will leak
memory in true branch with 'cmd:'. Let's allocate memory
for fwd variable just in else statement.

Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-11-21 10:50:54 +00:00
zhanghailiang ed6273e26f net: The third parameter of getsockname should be initialized
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-11-18 15:04:35 +00:00
Gonglei d4754a9531 l2tpv3: fix fd leak
In this false branch, fd will leak when it is zero.
Change the testing condition.

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
[Fix net_l2tpv3_cleanup as well. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-17 11:40:36 +01:00
zhanghailiang 77374582ab l2tpv3: fix possible double free
freeaddrinfo(result) does not assign result = NULL, after frees it.
There will be a double free when it goes error case.
It is reported by covertiy.

Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-14 12:16:24 +01:00
Peter Wu 7912d04be6 slirp/smbd: modify/set several parameters in generated smbd.conf
The file sharing module should not handle printers, so disable it.
The options 'load printers' and 'printing' have been available since the
beginning (May 1996, commit 0e8fd3398771da2f016d72830179507f3edda51b).
Option 'disable spoolss' is available since Samba 2.0.4, commit
de5f42c9d9172592779fa2504d44544e3b6b1c0d).

Next, "socket address" was reported as deprecated, use a combination of
"interfaces" and "bind interfaces only" instead (available since October
1997, commit 79f4fb52c1ed56fd843f81b4eb0cdd2991d4d0f4).

Override cache directory to avoid writing to a global directory. Option
available since Samba 3.4.0, Jan 2009, commit
19a05bf2f485023b11b41dfae3f6459847d55ef7.

Set "usershare max shared=0" to prevent a global directory from being
used. Option available since Samba 3.0.23, February 2006, commit
5831715049f2d460ce42299963a5defdc160891b.

The last option was introduced with Samba 3.4.0, but previously
"state directory" was already added which exists in Samba 3.4.0. As
unknown parameters are ignored (while printing a warning), it should be
safe to add another option.

Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-11-11 08:49:16 +03:00
Gonglei 84f8f3dace tap: fix possible fd leak in net_init_tap
In hotplugging scenario, taking those true branch, the file
handler do not be closed. Let's close them before return.

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-11-02 10:05:35 +03:00
Gonglei d0caa3eb53 tap: do not close(fd) in net_init_tap_one
commit 5193e5fb (tap: factor out common tap initialization)
introduce net_init_tap_one(). But it's inappropriate that
we close fd in net_init_tap_one(), we should lay it in the
caller, becuase some callers needn't to close it if we get
the fd by monitor_handle_fd_param().

On the other hand, in other exceptional branches fd isn't
closed, so that's incomplete anyway.

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-11-02 10:05:32 +03:00
Gonglei b391567b64 tap_int.h: remove repeating NETWORK_SCRIPT defines
DEFAULT_NETWORK_SCRIPT and DEFAULT_NETWORK_DOWN_SCRIPT
have been defined in net/net.h included in
tap.c, which is the only C file that using those two macro.
Let's remove the repeating macroinstruction.

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-11-02 10:04:34 +03:00
Michael Tokarev 44d8d2b2dd net/slirp: specify logbase for smbd
It looks like smbd always logs to /var/log/samba/log.$progname
even if config file specifies different logfile -- when it needs
to log something before completing reading the config file.  But
if it can't open it for writing, it fails and exits.  Tell smbd
to use our temp dir as logbase (-l option) to avoid that.

The same option is used by samba3 and samba4, so there should
be no incompatible changes.

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Tested-by: Jan Kiszka <jan.kiszka@siemens.com>
2014-11-02 10:04:34 +03:00
Peter Maydell 8cf8c92e77 Net patches
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUCJQsAAoJEJykq7OBq3PIFs4H/jHdJ65oXUeS8REtDwsRaU/q
 Ftny6suH0j8XYh/zFSppNFHprX/i2AB7oJpHS8MzVjglxQ06OT/BQWSb2NA99URD
 PARU0/Ijn2ZgReCiMS3qBGotYLJV/pJsZRtmi6xc/v9Zz/LlziBo1J/ZsZeMkhiP
 RL/Q5ySixyWGx32989YcTmn98aCc4nvG70pE3dz3I3PPYQtUn38uqTltYPORaOgy
 txhIOxeyvwgL+jwYvoJq5UgDpOw/QNtLRzN0+YydRUs5ad7roSlRX4PvlBgXxfWc
 NPxt/wM+OPEyN029KLV8IjVNvxxM/QRNFqksabnmJIS/SgBaiSRPHZuHR5po8C4=
 =cCXt
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/stefanha/tags/net-pull-request' into staging

Net patches

# gpg: Signature made Thu 04 Sep 2014 17:32:44 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"

* remotes/stefanha/tags/net-pull-request:
  virtio-net: purge outstanding packets when starting vhost
  net: complete all queued packets on VM stop
  net: invoke callback when purging queue
  virtio: don't call device on !vm_running
  virtio-net: don't run bh on vm stopped
  net: Forbid dealing with packets when VM is not running

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-09-04 17:39:07 +01:00
Michael S. Tsirkin ca77d85e1d net: complete all queued packets on VM stop
This completes all packets, ensuring that callbacks
will not run when VM is stopped.

Cc: qemu-stable@nongnu.org
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-04 17:19:09 +01:00
Michael S. Tsirkin 07d8084624 net: invoke callback when purging queue
devices rely on packet callbacks eventually running,
but we violate this rule whenever we purge the queue.
To fix, invoke callbacks on all packets on purge.
Set length to 0, this way callers can detect that
this happened and re-queue if necessary.

Cc: qemu-stable@nongnu.org
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-04 17:19:09 +01:00
zhanghailiang e1d64c084b net: Forbid dealing with packets when VM is not running
For all NICs(except virtio-net) emulated by qemu,
Such as e1000, rtl8139, pcnet and ne2k_pci,
Qemu can still receive packets when VM is not running.

If this happened in *migration's* last PAUSE VM stage, but
before the end of the migration, the new receiving packets will possibly dirty
parts of RAM which has been cached in *iovec*(will be sent asynchronously) and
dirty parts of new RAM which will be missed.
This will lead serious network fault in VM.

To avoid this, we forbid receiving packets in generic net code when
VM is not running.

Bug reproduction steps:
(1) Start a VM which configured at least one NIC
(2) In VM, open several Terminal and do *Ping IP -i 0.1*
(3) Migrate the VM repeatedly between two Hosts
And the *PING* command in VM will very likely fail with message:
'Destination HOST Unreachable', the NIC in VM will stay unavailable unless you
run 'service network restart'

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-04 14:31:54 +01:00
Peter Maydell 70381662aa slirp: Honour vlan/stack in hostfwd_remove commands
The hostfwd_add and hostfwd_remove monitor commands allow the user
to optionally specify a vlan/stack tuple. hostfwd_add honours this,
but hostfwd_remove does not (it looks up the tuple but then ignores
the SlirpState it has looked up and always uses the first stack
in the list anyway). Correct this to honour what the user requested.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-09-02 22:38:16 +04:00
Roger Pau Monne 8677de2b4d tap-bsd: implement a FreeBSD only version of tap_open
The current behaviour of tap_open for BSD systems differ greatly from
it's Linux counterpart. Since FreeBSD supports interface renaming and
tap device cloning by opening /dev/tap, implement a FreeBSD specific
version of tap_open that behaves like it's Linux counterpart.

This is specially important for toolstacks that use Qemu (like Xen
libxl), in order to have a unified behaviour across suported
platforms.

Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-01 15:57:48 +00:00
Peter Maydell b739ef05db slirp: Give error message if hostfwd_add/remove for unrecognized vlan/stack
If the user specified a (vlan ID, slirp stack name) tuple in a monitor
hostfwd_add/remove command and we can't find it, give the user an
error message rather than silently doing nothing.

This brings this error case in slirp_lookup() into line with the
other two.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-07-18 17:45:36 +04:00
Gonglei 015a33bd05 net: add mmsghdr struct check for L2TPV3
The mmsghdr struct is only introduced in Linux 2.6.32; add a
configure check for it and disable L2TPV3 on hosts which are
too old to provide it, rather than simply failing to compile.

Reported-by: chenliang <chenliang88@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1404219488-11196-1-git-send-email-arei.gonglei@huawei.com
[PMM: cleaned up commit message and corrected kernel version number]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-01 17:42:23 +01:00
Jiri Pirko 575a1c0e42 net: move queue number into NICPeers
It indicates the number of elements in ncs field and makes sense to have
int inside NICPeers. Also in parse_netdev we do not need to access
container and work with NICPeers only.

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-27 11:19:31 +02:00
Anton Ivanov 3fb69aa1d1 net: L2TPv3 transport
This transport allows to connect a QEMU nic to a static Ethernet
over L2TPv3 tunnel. The transport supports all options present
in the Linux kernel implementation. It allows QEMU to connect
to any Linux host running kernel 3.3+, most routers and network
devices as well as other QEMU instances.

[Fixed up net_client_init1() switch statement to support -netdev
--Stefan]

Signed-off-by: Anton Ivanov <antivano@cisco.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-27 10:39:10 +02:00
Nikolay Nikolaev 03ce574442 Add the vhost-user netdev backend to the command line
The supplied chardev id will be inspected for supported options. Only
a socket backend, with a set path (i.e. a Unix socket) and optionally
the server parameter set, will be allowed. Other options (nowait, telnet)
will make the chardev unusable and the netdev will not be initialised.

Additional checks for validity:
  - requires `-numa node,memdev=..`
  - requires `-device virtio-net-*`

The `vhostforce` option is used to force vhost-net when we deal with
non-MSIX guests.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2014-06-19 18:44:18 +03:00
Nikolay Nikolaev d314f586b3 Add new vhost-user netdev backend
Add a new QEMU netdev backend that is intended to invoke vhost_net with the
vhost-user backend. It uses an Unix socket chardev to establish a
communication with the 'slave' (client and server mode supported).

At runtime the netdev will handle OPEN/CLOSE events from the chardev. Upon
disconnection it will set link_down accordingly and notify virtio-net; the
virtio-net interface will go down.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 16:41:57 +03:00
Nikolay Nikolaev 1a1bfac9ee Add vhost-backend and VhostBackendType
Use vhost_set_backend_type to initialise a proper vhost_ops structure.
In vhost_net_init and vhost_net_start_one call conditionally TAP related
initialisation depending on the vhost backend type.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 16:41:56 +03:00
Nikolay Nikolaev 81647a655f vhost_net_init will use VhostNetOptions to get all its arguments
vhost_dev_init will replace devfd and devpath with a single opaque argument.
This is initialised with a file descriptor. When TAP is used (through
vhost_net), open /dev/vhost-net and pass the fd as an opaque parameter in
VhostNetOptions. The same applies to vhost-scsi - open /dev/vhost-scsi and
pass the fd.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 16:41:56 +03:00
Hani Benhabiles 84007e8181 net: Export valid host network devices list
Signed-off-by: Hani Benhabiles <hani@linux.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-11 10:10:29 -04:00
Hani Benhabiles 40d19394b7 monitor: Add set_link arguments completion.
Make it possible to query all net clients without specifying an ID when calling
qemu_find_net_clients_except().

This also adds the add_completion_option() function which is to be used for
other commands completions as well.

Signed-off-by: Hani Benhabiles <hani@linux.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-15 15:16:02 -04:00
Peter Maydell 93156cef1c trivial patches for 2014-04-28
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQEcBAABAgAGBQJTXd9hAAoJEL7lnXSkw9fb9XUIAKRVB/RAIuaQExVDOxq1C6ml
 o9gpFbCm1rE/fDB3fxUdppMxeOy4nLaX+H/RspYCtzEF8QBWA+OXiB5sH19I2Yd5
 1eiseNXimTMIWIJNwqgXCEabxOE2ae/9kQWry7pI3F7u2cA8EZZlgUIDzO5ogREj
 bi+Fy6KDlrMCLUBxtmoAkOnDPbTdnkVxu3Uv/oBFcrNCgklpGitIM+dMcayCUJ2q
 Mp2M/jRrGsCVB+cTpEbzqPoC/l2Xv6VYAvnjQWvJM9RpitzghufVAJ9IJa1xJM83
 2F05MEIr6h+ymLB7qh8x2lrJHN14O3t50uFaXL//om9JPlPei9lHQhfpVrg0UmQ=
 =2Bsm
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mjt/tags/trivial-patches-2014-04-28' into staging

trivial patches for 2014-04-28

# gpg: Signature made Mon 28 Apr 2014 05:56:01 BST using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>"
# gpg:                 aka "Michael Tokarev <mjt@debian.org>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D  4324 457C E0A0 8044 65C5
#      Subkey fingerprint: 6F67 E18E 7C91 C5B1 5514  66A7 BEE5 9D74 A4C3 D7DB

* remotes/mjt/tags/trivial-patches-2014-04-28:
  slirp/smb: Move ncalrpc directory to tmp
  po: add proper Language: tags to .po files
  po/Makefile: fix $SRC_PATH reference
  init_paths: fix minor memory leak
  virtfs-proxy-helper: fix call to accept
  net/net.c: remove unnecessary semicolon
  Add QEMU logo (SVG file)
  vl: avoid closing stdout with 'writeconfig'
  xilinx: Fix typo in comment (Marvel -> Marvell)
  vl: Eliminate a superfluous local variable
  vl: Remove useless 'continue'
  gitignore: cleanups #2
  tests/.gitignore: Ignore test-rfifolock
  move test-* from .gitignore to tests/.gitignore
  configure: Improve help behavior
  vl: convert -m to QemuOpts
  qemu-option: introduce qemu_find_opts_singleton
  misc: Use cpu_physical_memory_read and cpu_physical_memory_write

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-04-28 13:43:17 +01:00
Michael Buesch b87b8a8b32 slirp/smb: Move ncalrpc directory to tmp
The smbd forked by qemu still uses the default ncalrpc directory
in /var/run/samba. This may lead to problems, if /var/run/samba
does not exist (for example if /var/run is a tmpfs and the host
smbd was not started).

This leads to the following error message from samba
and an unworkable smbd:
	Failed to create pipe directory /var/run/samba/ncalrpc - No such file or directory

Fix this by pointing smbd to /tmp/qemu-smb.%d.%d/ncalrpc as ncalrpc directory.
Smbd will create the actual ncalrpc subdirectory on its own.

Signed-off-by: Michael Buesch <m@bues.ch>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Applying this to -trivial because it _is_ rather trivial
 and because Jan does not reply for months)
2014-04-28 08:55:32 +04:00
Igor Ryzhov 9057698d93 net/net.c: remove unnecessary semicolon
Signed-off-by: Igor Ryzhov <iryzhov@arccn.ru>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-04-28 08:55:32 +04:00
Markus Armbruster 9083da1d4c net: Don't use error_is_set() to suppress additional errors
Using error_is_set(errp) that way can sweep programming errors under
the carpet when we get called incorrectly with an error set.

qmp_query_rx_filter() breaks its loop when it detects an error.  It
needs to set another error when the loop completes normally.

Return right away instead of merely breaking the loop.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-25 15:58:07 +02:00
Markus Armbruster 638fb14169 net: Make qmp_query_rx_filter() with name argument more obvious
With a client name, the QMP command is specified to return a list of
one element.  This isn't locally obvious in the code.  Make it so.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-25 15:58:07 +02:00
Igor Ryzhov b925965294 net/net.c: Remove unnecessary semicolon
Signed-off-by: Igor Ryzhov <iryzhov@arccn.ru>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-25 13:40:04 +02:00
Pankaj Gupta 13a12f869b tap: Avoid extra iterations while closing file fd
Avoid iterations for fd 0, 1 & 2 when we are closing file fds in child process.

Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-25 13:40:03 +02:00
Hani Benhabiles 86e117724a net: Report error when device / hub combo is not found.
Also convert nearby monitor_printf() call to error_report().

Signed-off-by: Hani Benhabiles <hani@linux.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-04-18 10:33:36 +04:00
Prasad Joshi 131e744a15 net: netmap_poll must update both read/write poll state
Signed-off-by: Prasad Joshi <prasadjoshi.linux@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-03-25 13:31:38 +01:00
Peter Maydell 2f23e9ae2c Net patches
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJTIGWkAAoJEJykq7OBq3PIsvYH/jLFORFyUHflSsEmPjjRKGfR
 Jd41UP67CXqgOyeJfDDN/fks2o6n3woRsoz/EfPXTiOvXB50jBKqmBarOwh/Zejq
 /5hpUC8IyYOFpeKbiCSneXvANP+0CfH/FD8yP64a3FTBXQFQD9GzJpKf3zlcmNvI
 XotlIr/WxTXXNSQf2dTleobGJWg8otDFREBCvalTndSBjYZ0GdvvNOCiAkqYviX2
 wLjrrRvJYW/lxOTIfTmGQFHs89tjq9ZvotKr9QPOQ5MOGaBExYnOTaSHmmPHjYpf
 HsWkk+u85vLSRp5FU5CTW2VfhIujBghwaFFnVh2BdMjIlzkjbDnDMcRr2YgebOw=
 =zhuM
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/stefanha/tags/net-pull-request' into staging

Net patches

# gpg: Signature made Wed 12 Mar 2014 13:48:20 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha/tags/net-pull-request:
  tap: avoid deadlocking rx

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-12 16:45:25 +00:00
Stefan Hajnoczi 68e5ec6400 tap: avoid deadlocking rx
The net subsystem has a control flow mechanism so peer NetClientStates
can tell each other to stop sending packets.  This is used to stop
monitoring the tap file descriptor for incoming packets if the guest rx
ring has no spare buffers.

There is a corner case when tap_can_send() is true at the beginning of
an event loop iteration but becomes false before the tap_send() fd
handler is invoked.

tap_send() will read the packet from the tap file descriptor and attempt
to send it.  The net queue will hold on to the packet and return 0,
indicating that further I/O is not possible.  tap then stops monitoring
the file descriptor for reads.

This is unlike the normal case where tap_can_send() is the same before
and during the event loop iteration.  The event loop would simply not
monitor the file descriptor if tap_can_send() returns true.  Upon next
iteration it would check tap_can_send() again and begin monitoring if we
can send.

The deadlock happens because tap_send() explicitly disabled read_poll.
This is done with the expectation that the peer will call
qemu_net_queue_flush().  But hw/net/virtio-net.c does not monitor
vm_running transitions and issue the flush.  Hence we're left with a
broken tap device.

Cc: qemu-stable@nongnu.org
Reported-by: Neil Skrypuch <neil@tembosocial.com>
Tested-by: Neil Skrypuch <neil@tembosocial.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-03-12 10:12:00 +01:00
Michael Tokarev 5c1e1890bf slirp smb with modern win guests when samba is also running on host
After numerous reports that -smb (or -netdev user,smb=foo) not working
with modern windows (win7 and vista are reported as non-working), I
started digging myself.  And found that indeed it doesn't work, and
why.

The thing is that modern win tries to connect to port 445 (microsoft-ds)
first, and if that fails, it falls back to old port 139 (netbios-ssn).

slirp code in qemu only redirects port 139, it does not touch port 445.

So the prob is that if samba is also running on the host, guest will try
to communicate using port 445, and that will succed, but ofcourse guest
will not talk with our samba but with samba running on the host.

If samba is not running on the host, guest will fall back to port 139,
and will reach the redirecting rule and qemu will spawn smbd correctly.

The solution is to redirect both ports (139 and 445), and the fix is
a one-liner, adding second call to slirp_add_exec() at the end of
net/slirp.c:slirp_smb() function (provided below).

But it looks like that is not a proper fix really, since in theory
we should redirect both ports to the SAME, single samba instance,
but I'm not sure this is possible with slirp.  Well, even if two
smbd processes will be run on the same config dir, it should not
be a problem.

The one-liner (not exactly 1 since it touches previous line too) is like
this:

Signed-off-By: Michael Tokarev <mjt@tls.msk.ru>

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2014-03-12 08:13:24 +01:00
Michael Buesch c2804ee6c0 qemu/slirp: Fix SMB security configuration on newer samba versions
The smb.conf automatically generated by qemu's -smb option fails on current
samba, because smbd rejects the security=share option with the following warning:

>   WARNING: Ignoring invalid value 'share' for parameter 'security'

Which makes it fall back to security=user without guest login.
This results in being unable to login to the samba server from the guest OS.

This fixes it by selecting 'user' explicitly and mapping
unknown users to guest logins.

Signed-off-by: Michael Buesch <m@bues.ch>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2014-03-12 08:06:22 +01:00
Stefan Hajnoczi d6085e3ace net: remove implicit peer from offload API
The virtio_net offload APIs are used on the NIC's peer (i.e. the tap
device).  The API was defined to implicitly use nc->peer, saving the
caller the trouble.

This wasn't ideal because:
1. There are callers who have the peer but not the NIC.  Currently they
   are forced to bypass the API and access peer->info->... directly.
2. The rest of the net.h API uses nc, not nc->peer, so it is
   inconsistent.

This patch pushes nc->peer back up to callers.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-25 14:31:05 +01:00
Vincenzo Maffione 0a985b3727 net: Disable netmap backend when not supported
This patch fixes configure so that the netmap backend is not compiled in if the
host doesn't support an API version >= 11. A version upper bound (15) has been
added so that the netmap API can be extended with some minor features without
requiring QEMU code modifications.

Moreover, some changes have been done to net/netmap.c in order to reflect the
current netmap API/ABI (11).

The NETMAP_WITH_LIBS macro makes possible to include some utilities (e.g.
netmap ring macros, D(), RD() and other high level functions) through the netmap
headers. In this way we get rid of the D and RD macro definitions in the QEMU
code, and we open the way for further code simplifications that will be
introduced by future patches.

Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-25 11:50:17 +01:00
Vincenzo Maffione f6c65bfb93 net: add offloading support to netmap backend
Whit this patch, the netmap backend supports TSO/UFO/CSUM
offloadings, and accepts the virtio-net header, similarly to what
happens with TAP. The offloading callbacks in the NetClientInfo
interface have been implemented.

Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-25 11:50:17 +01:00
Vincenzo Maffione 3bac80d31a net: make tap offloading callbacks static
Since TAP offloadings are manipulated through a new API, it's
not necessary to export them in include/net/tap.h anymore.

Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-25 11:50:17 +01:00
Vincenzo Maffione 2e753bcc7d net: TAP uses NetClientInfo offloading callbacks
The TAP NetClientInfo structure is inizialized with the TAP-specific
functions that manipulates offloading features.

Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-25 11:50:17 +01:00
Vincenzo Maffione 1f55ac4586 net: extend NetClientInfo for offloading
Some new callbacks have been added to generalize the operations done
by virtio-net and vmxnet3 frontends to manipulate TAP offloadings.

Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-25 11:50:17 +01:00
Vincenzo Maffione e96dfd110e net: change vnet-hdr TAP prototypes
The tap_has_vnet_hdr() and tap_has_vnet_hdr_len() functions used
to return int, even though they only return true/false values.
This patch changes the prototypes to return bool.

Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-25 11:50:16 +01:00
Markus Armbruster 84d18f065f Use error_is_set() only when necessary
error_is_set(&var) is the same as var != NULL, but it takes
whole-program analysis to figure that out.  Unnecessarily hard for
optimizers, static checkers, and human readers.  Dumb it down to
obvious.

Gets rid of several dozen Coverity false positives.

Note that the obvious form is already used in many places.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-02-17 11:57:23 -05:00
Kusanagi Kouichi 1f149e721f tap-linux: Get features once and use it many times
Signed-off-by: Kusanagi Kouichi <slash@ac.auone-net.jp>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-01-27 15:44:06 +01:00
Hani Benhabiles 4bf2c138dd net: Use g_strdup_printf instead of snprintf.
assign_name() in net/net.c is using snprintf + g_strdup to get the same
result as g_strdup_printf.

Signed-off-by: Hani Benhabiles <kroosec@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-01-27 15:44:06 +01:00
Stefan Weil dff7424dc0 misc: Use macro ARRAY_SIZE where possible
This improves readability and simplifies the code.

Cc: Anthony Liguori <aliguori@amazon.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-12-23 16:02:19 +04:00
Vlad Yasevich 02d38fcb2c net: Update netdev peer on link change
When a link change occurs on a backend (like tap), we currently do
not propage such change to the nic.  As a result, when someone turns
off a link on a tap device, for instance, then a guest doesn't see
that change and continues to try to send traffic or run DHCP even
though the lower-layer is disconnected.  This is OK when the network
is set up as a HUB since the the guest may be connected to other HUB
ports too, but when it's set up as a netdev, it makes thinkgs worse.

The patch addresses this by setting the peers link down only when the
peer is not a HUBPORT device.  With this patch, in the following config
  -netdev tap,id=net0 -device e1000,mac=XXXXX,netdev=net0
when net0 link is turned off, the guest e1000 shows lower-layer link
down. This allows guests to boot much faster in such configurations.
With windows guest, it also allows the network to recover properly
since windows will not configure the link-local IPv4 address, and
when the link is turned on, the proper address address is configured.

Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-09 13:33:20 +01:00
Vincenzo Maffione 58952137b0 net: Adding netmap network backend
This patch adds support for a network backend based on netmap.
netmap is a framework for high speed packet I/O. You can use it
to build extremely fast traffic generators, monitors, software
switches or network middleboxes. Its companion software switch
VALE lets you interconnect virtual machines.
netmap and VALE are implemented as a non-intrusive kernel module,
support NICs from multiple vendors, are part of standard FreeBSD
distributions and available in source format for Linux too.

To compile QEMU with netmap support, use the following configure
options:
    ./configure [...] --enable-netmap --extra-cflags=-I/path/to/netmap/sys
where "/path/to/netmap" contains the netmap source code, available at
    http://info.iet.unipi.it/~luigi/netmap/

The same webpage contains more information about the netmap project
(together with papers and presentations).

Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-09 13:33:19 +01:00
Sergey Fedorov 1597591cca net: fix qemu_flush_queued_packets() in presence of a hub
Do not return after net_hub_flush(). Always flush callee network client
incoming queue.

Signed-off-by: Sergey Fedorov <s.fedorov@samsung.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-11-08 17:32:34 +01:00
Dmitry Krivenok d60b20cf2a net: disallow to specify multicast MAC address
[Assigning a multicast MAC address to a NIC leads to confusing behavior.
Reject multicast MAC addresses so users are alerted to their error
straight away.

The "net/eth.h" in6_addr rename prevents a name collision with
<netinet/in.h> on Linux.
-- Stefan]

Signed-off-by: Dmitry V. Krivenok <krivenok.dmitry@gmail.com>
Reviewed-by: Amos Kong <kongjianjun@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-11-08 17:32:34 +01:00
Sebastian Ottlik bcbe92fb08 net: call socket_set_fast_reuse instead of setting SO_REUSEADDR
SO_REUSEADDR should be avoided on Windows but is desired on other operating
systems. So instead of setting it we call socket_set_fast_reuse that will result
in the appropriate behaviour on all operating systems.

An exception to this rule are multicast sockets where it is sensible to have
multiple sockets listen on the same ip and port and we should set SO_REUSEADDR
on windows.

Signed-off-by: Sebastian Ottlik <ottlik@fzi.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
2013-10-02 19:20:31 +02:00
Jan Kiszka 067404be62 net: Rename send_queue to incoming_queue
Each networking client has a queue for packets that could not yet be
delivered to that client. Calling this queue "send_queue" is highly
confusing as it has nothing to to with packets send from this client but
to it. Avoid this confusing by renaming it to "incoming_queue".

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 17:01:26 +02:00
Brad Smith aa4f082f75 tap: Use numbered tap/tun devices on all *BSD OS's
The following patch simplifies the *BSD tap/tun code and makes use of numbered
tap/tun interfaces on all *BSD OS's. NetBSD has a patch in their pkgsrc tree
to make use of this feature and DragonFly also supports this as well.

Signed-off-by: Brad Smith <brad@comstyle.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 17:01:26 +02:00
Alex Bligh bc72ad6754 aio / timers: Switch entire codebase to the new timer API
This is an autogenerated patch using scripts/switch-timer-api.

Switch the entire code base to using the new timer API.

Note this patch may introduce some line length issues.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 19:14:24 +02:00
Alex Bligh 6a1751b7aa aio / timers: Untangle include files
include/qemu/timer.h has no need to include main-loop.h and
doing so causes an issue for the next patch. Unfortunately
various files assume including timers.h will pull in main-loop.h.
Untangle this mess.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 19:10:27 +02:00
Stefan Weil dfc6f86567 misc: Use g_assert_not_reached for code which is expected to be unreachable
The macro g_assert_not_reached is a better self documenting replacement
for assert(0) or assert(false).

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-07-27 11:22:54 +04:00
Amos Kong b1be42803b net: add support of mac-programming over macvtap in QEMU side
Currently macvtap based macvlan device is working in promiscuous
mode, we want to implement mac-programming over macvtap through
Libvirt for better performance.

Design:
 QEMU notifies Libvirt when rx-filter config is changed in guest,
 then Libvirt query the rx-filter information by a monitor command,
 and sync the change to macvtap device. Related rx-filter config
 of the nic contains main mac, rx-mode items and vlan table.

This patch adds a QMP event to notify management of rx-filter change,
and adds a monitor command for management to query rx-filter
information.

Test:
 If we repeatedly add/remove vlan, and change macaddr of vlan
 interfaces in guest by a loop script.

Result:
 The events will flood the QMP client(management), management takes
 too much resource to process the events.

 Event_throttle API (set rate to 1 ms) can avoid the events to flood
 QMP client, but it could cause an unexpected delay (~1ms), guests
 guests normally expect rx-filter updates immediately.

 So we use a flag for each nic to avoid events flooding, the event
 is emitted once until the query command is executed. The flag
 implementation could not introduce unexpected delay.

There maybe exist an uncontrollable delay if we let Libvirt do the
real change, guests normally expect rx-filter updates immediately.
But it's another separate issue, we can investigate it when the
work in Libvirt side is done.

Michael S. Tsirkin: tweaked to enable events on start
Michael S. Tsirkin: fixed not to crash when no id
Michael S. Tsirkin: fold in patch:
   "additional fixes for mac-programming feature"
Amos Kong: always notify QMP client if mactable is changed
Amos Kong: return NULL list if no net client supports rx-filter query

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-15 21:23:08 +03:00
Bas van Sisseren 68756ba8be fix -net user checks by reordering checks
reorder slirp config options. first check the dns-server-address,
then check the first-dhcp-address. the original code was comparing
the first-dhcp-address with the default dns-server-address, not
the configured dns-server-address.

Signed-off-by: Bas van Sisseren <bas@quarantainenet.nl>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2013-06-19 12:44:38 +02:00
Jason Wang c87826a878 tap: fix NULL dereference when passing invalid parameters to tap
This patch forbid the following invalid parameters to tap:

1) fd and vhostfds were specified but vhostfd were not specified
2) vhostfds were specified but fds were not specified
3) fds and vhostfd were specified

For 1 and 2, net_init_tap_one() will still pass NULL as vhostfdname to
monitor_handle_fd_param(), which may crash the qemu.

Also remove the unnecessary has_fd check.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Stefan Hajnoczi <shajnocz@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-07 15:48:11 +02:00
Alasdair McLeay d73fe37e7b net: support for bridged networking on Mac OS X
tun tap can be implemented on Mac OS X using
http://tuntaposx.sourceforge.net

It behaves in the same way as FreeBSD/OpenBSD implementations, but Qemu
needs a patch to use the OpenBS/FreeBSD code.

As per the patch listed in this forum thread:
http://forum.gns3.net/post17679.html#p17679

And also as used in the MacPorts installation:
https://trac.macports.org/browser/trunk/dports/emulators/qemu/files/patch-net-tap-interface.diff

Signed-off-by: Alasdair McLeay <alasdair.mcleay@me.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-05-24 16:33:48 +02:00
Jason Wang 7873df408d tap: properly initialize vhostfds
Only tap->vhostfd were checked net_init_tap_one(), but tap->vhostfds were
forgot, this will lead qemu to ignore all fds passed by management through
vhostfds, and tries to create vhost_net device itself. Fix by adding this check
also.

Reportyed-by: Michal Privoznik <mprivozn@redhat.com>
Cc: Michal Privoznik <mprivozn@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-05-03 13:53:46 +02:00
Amos Kong c963530a5b net: make network client name unique
assign_name() creates a name MODEL.NUM, where MODEL is the client's model,
and NUM is the number of MODELs that already exist.

Markus added NIC naming for non-VLAN clients in commit 53e51d85.
commit d33d93b2 incorrectly added a judgement of net-hub. It caused
net clients created with -netdev get same names.

eg:
 # qemu-upstream -device virtio-net-pci,netdev=h1 -netdev tap,id=h1 \
                    -device virtio-net-pci,netdev=h2 -netdev tap,id=h2 ..
 (qemu) info network
 virtio-net-pci.0: index=0,type=nic,model=virtio-net-pci,macaddr=52:54:00:12:34:56
  \ h1: index=0,type=tap,ifname=tap0,script=/etc/qemu-ifup,downscript=/etc/qemu-ifdown
 virtio-net-pci.0: index=0,type=nic,model=virtio-net-pci,macaddr=52:54:00:12:34:57
  \ h2: index=0,type=tap,ifname=tap1,script=/etc/qemu-ifup,downscript=/etc/qemu-ifdown

This patch removed the check of nic-hub, and created unique names for
all net clients that have same model.

v2: update commitlog & comments

Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-05-03 13:53:46 +02:00
Paolo Bonzini dccfcd0e5f sysemu: avoid proliferation of include/ subdirectories
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-15 18:19:25 +02:00
Paolo Bonzini 0d09e41a51 hw: move headers to include/
Many of these should be cleaned up with proper qdev-/QOM-ification.
Right now there are many catch-all headers in include/hw/ARCH depending
on cpu.h, and this makes it necessary to compile these files per-target.
However, fixing this does not belong in these patches.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:10 +02:00
Hans de Goede 456d606923 qemu-char: Call fe_claim / fe_release when not using qdev chr properties
chardev-frontends need to explictly check, increase and decrement the
avail_connections "property" of the chardev when they are not using a
qdev-chardev-property for the chardev.

This fixes things like:
qemu-kvm -chardev stdio,id=foo -device isa-serial,chardev=foo \
  -mon chardev=foo

Working, where they should fail. Most of the changes here are due to
old hardware emulation code which is using serial_hds directly rather then
a qdev-chardev-property.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Message-id: 1364412581-3672-3-git-send-email-hdegoede@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-04 19:21:25 -05:00
Stefan Hajnoczi fc13fa00ea net: ensure "socket" backend uses non-blocking fds
There are several code paths in net_init_socket() depending on how the
socket is created: file descriptor passing, UDP multicast, TCP, or UDP.
Some of these support both listen and connect.

Not all code paths set the socket to non-blocking.  This patch addresses
the file descriptor passing and UDP cases which were missing
socket_set_nonblock(fd) calls.

I considered moving socket_set_nonblock(fd) to a central location but it
turns out the code paths are different enough to require non-blocking at
different places.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-04-02 11:47:37 -04:00
Stefan Hajnoczi f9e8cacc55 oslib-posix: rename socket_set_nonblock() to qemu_set_nonblock()
The fcntl(fd, F_SETFL, O_NONBLOCK) flag is not specific to sockets.
Rename to qemu_set_nonblock() just like qemu_set_cloexec().

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-04-02 11:47:37 -04:00
Scott Feldman d32fcad366 net: increase buffer size to accommodate Jumbo frame pkts
Socket buffer sizes were hard-coded to 4K for VDE and socket netdevs.  Bump this
up to 68K (ala tap netdev) to handle maximum GSO packet size (64k) plus plenty
of room for the ethernet and virtio_net headers.

Originally, ran into this limitation when using -netdev UDP sockets to connect
VM-to-VM, where VM interface is configure with MTU=9000.  (Using virtio_net
NIC model).  Test is simple: ping -M do -s 8500 <target>.  This test will
attempt to ping with unfragmented packet of given size.  Without patch, size
is limited to < 4K (minus protocol hdrs).  With patch, ping test works with pkt
size up to 9000 (again, minus protocol hdrs).

v2: per Stefan, increase buf size to (4096+65536) as done in tap and apply
    to vde and socket netdevs.
v1: increase buf size to 12K just for -netdev UDP sockets

Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-25 11:14:07 +01:00
Dmitry Fleytman 75020a7021 Common definitions for VMWARE devices
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Yan Vugenfirer <yan@daynix.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-25 11:13:10 +01:00
Dmitry Fleytman 8402630169 net: iovec checksum calculator
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Yan Vugenfirer <yan@daynix.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-25 11:13:10 +01:00
Dmitry Fleytman 5acf5ea4bc Checksum-related utility functions
net_checksum_add_cont()
checksum calculation for scattered data with odd chunk sizes

net_raw_checksum()
checksum calculation for a buffer

Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Yan Vugenfirer <yan@daynix.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-25 11:13:09 +01:00
Stefan Hajnoczi 20048d0a12 net: use socket_set_nodelay() for -netdev socket
Reduce -netdev socket latency by disabling the Nagle algorithm on
SOCK_STREAM sockets in net/socket.c.  Since we are tunelling Ethernet
over TCP we shouldn't artificially delay outgoing packets, let the guest
decide packet scheduling.

I already get sub-millisecond -netdev socket ping times on localhost, so
there was no measurable difference in my testing.  This won't hurt
though and may improve remote socket performance.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
2013-03-25 11:13:09 +01:00
Peter Maydell 085d813407 Fix typos and misspellings
Fix various typos and misspellings. The bulk of these were found with
codespell.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-22 13:25:07 +01:00
Stefan Weil 9957fc7f1e MinGW: Replace setsockopt by qemu_setsocketopt
Instead of adding missing type casts which are needed by MinGW for the
4th argument, the patch uses qemu_setsockopt which was invented for this
purpose.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-22 13:14:48 +01:00
Jason Wang f6b26cf257 net: reduce the unnecessary memory allocation of multiqueue
Edivaldo reports a problem that the array of NetClientState in NICState is too
large - MAX_QUEUE_NUM(1024) which will wastes memory even if multiqueue is not
used.

Instead of static arrays, solving this issue by allocating the queues on demand
for both the NetClientState array in NICState and VirtIONetQueue array in
VirtIONet.

Tested by myself, with single virtio-net-pci device. The memory allocation is
almost the same as when multiqueue is not merged.

Cc: Edivaldo de Araujo Pereira <edivaldoapereira@yahoo.com.br>
Cc: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-27 16:10:47 +01:00
Peter Lieven d26e445c80 tap: set IFF_ONE_QUEUE per default
historically the kernel queues packets two times. once
at the device and second in qdisc. this is believed to cause
interface stalls if one of these queues overruns.

setting IFF_ONE_QUEUE is the default in kernels >= 3.8. the
flag is ignored since then. see kernel commit
5d097109257c03a71845729f8db6b5770c4bbedc

Signed-off-by: Peter Lieven <pl@kamp.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-27 16:10:47 +01:00
Jason Wang ce675a7579 tap: forbid creating multiqueue tap when hub is used
Obviously, hub does not support multiqueue tap. So this patch forbids creating
multiple queue tap when hub is used to prevent the crash when command line such
as "-net tap,queues=2" is used.

Cc: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-27 16:10:47 +01:00
Luigi Rizzo 7d91ddd25e net: fix unbounded NetQueue
In the current implementation of qemu, running without a network
backend will cause the queue to grow unbounded when the guest is
transmitting traffic.

This patch fixes the problem by implementing bounded size NetQueue,
used with an arbitrary limit of 10000 packets, and dropping packets
when the queue is full _and_ the sender does not pass a callback.

The second condition makes sure that we never drop packets that
contains a callback (which would be tricky, because the producer
expects the callback to be run when all previous packets have been
consumed; so we cannot run it when the packet is dropped).

If documentation is correct, producers that submit a callback should
stop sending when their packet is queued, so there is no real risk
that the queue exceeds the max size by large values.

Signed-off-by: Luigi Rizzo <rizzo@iet.unipi.it>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-27 16:10:39 +01:00
Luigi Rizzo 199ee608f0 net: fix qemu_flush_queued_packets() in presence of a hub
When frontend and backend are connected through a hub as below
(showing only one direction), and the frontend (or in general, all
output ports of the hub) cannot accept more traffic, the backend
queues packets in queue-A.

When the frontend (or in general, one output port) becomes ready again,
quemu tries to flush packets from queue-B, which is unfortunately empty.

  e1000.0 <--[queue B]-- hub0port0(hub)hub0port1 <--[queue A]-- tap.0

To fix this i propose to introduce a new function net_hub_flush()
which is called when trying to flush a queue connected to a hub.

Signed-off-by: Luigi Rizzo <rizzo@iet.unipi.it>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-27 16:10:23 +01:00
Andreas Färber cc2a90432d net: Avoid NULL function pointer dereference on cleanup
The pSeries machine and some other devices don't supply a cleanup
callback. Revert part of 1ceef9f273 that
started calling it unconditionally.

Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1360707366-9271-1-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-13 11:57:25 -06:00
Michael Roth b890492110 net: fix infinite loop on exit
1ceef9f273 added handling for cleaning
up multiple queues in qemu_del_nic() for cases where multiqueue is in
use. To determine the number of queues it looks at nic->conf->queues,
then iterates through all the queues to cleanup the associated
NetClientStates. If no queues are found, no NetClientStates are deleted.

However, nic->conf->queues is only set when a peer is created via
-netdev or netdev_add, and is otherwise 0. This causes us to spin in
net_cleanup() if we attempt to shut down qemu before adding a host
device.

Since qemu_new_nic() unconditionally creates at least 1
queue/NetClientState at queue idx 0, make qemu_del_nic() always attempt
to clean it up.

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-07 13:13:39 -06:00
Anthony Liguori 02cd809099 tap: unbreak -netdev tap,fd=X
The multiqueue patch series broke -netdev tap,fd=X which manifests
as libvirt not being able to start a guest.  This was because it
passed NULL for the netdev name which results in an anonymous netdev
device regardless of what the user specified.

Cc: Jason Wang <jasowang@redhat.com>
Cc: Bruce Rogers <brogers@suse.com>
Reported-by: Bruce Rogers <brogers@suse.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01 18:05:30 -06:00
Jason Wang 264986e2c8 tap: multiqueue support
Recently, linux support multiqueue tap which could let userspace call TUNSETIFF
for a signle device many times to create multiple file descriptors as
independent queues. User could also enable/disabe a specific queue through
TUNSETQUEUE.

The patch adds the generic infrastructure to create multiqueue taps. To achieve
this a new parameter "queues" were introduced to specify how many queues were
expected to be created for tap by qemu itself. Alternatively, management could
also pass multiple pre-created tap file descriptors separated with ':' through a
new parameter fds like -netdev tap,id=hn0,fds="X:Y:..:Z". Multiple vhost file
descriptors could also be passed in this way.

Each TAPState were still associated to a tap fd, which mean multiple TAPStates
were created when user needs multiqueue taps. Since each TAPState contains one
NetClientState, with the multiqueue nic support, an N peers of NetClientState
were built up.

A new parameter, mq_required were introduce in tap_open() to create multiqueue
tap fds.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01 11:03:02 -06:00
Jason Wang e5dc0b402e tap: introduce a helper to get the name of an interface
This patch introduces a helper tap_get_ifname() to get the device name of tap
device. This is needed when ifname is unspecified in the command line and qemu
were asked to create tap device by itself. In this situation, the name were
allocated by kernel, so if multiqueue is asked, we need to fetch its name after
creating the first queue.

Only linux has this support since it's the only platform that supports
multiqueue tap.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01 11:03:02 -06:00
Jason Wang 16dbaf905b tap: support enabling or disabling a queue
This patch introduce a new bit - enabled in TAPState which tracks whether a
specific queue/fd is enabled. The tap/fd is enabled during initialization and
could be enabled/disabled by tap_enalbe() and tap_disable() which calls platform
specific helpers to do the real work. Polling of a tap fd can only done when
the tap was enabled.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01 11:03:02 -06:00
Jason Wang 94fdc6d030 tap: add Linux multiqueue support
This patch add basic multiqueue support for Linux. When multiqueue is needed, we
will first check whether kernel support multiqueue tap before creating more
queues. Two new functions tap_fd_enable() and tap_fd_disable() were introduced
to enable and disable a specific queue. Since the multiqueue is only supported
in Linux, return error on other platforms.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01 11:03:01 -06:00
Jason Wang 5193e5fbb5 tap: factor out common tap initialization
This patch factors out the common initialization of tap into a new helper
net_init_tap_one(). This will be used by multiqueue tap patches.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01 11:03:01 -06:00
Jason Wang 4e4f9ae7da tap: import linux multiqueue constants
Import multiqueue constants from if_tun.h from 3.8-rc3. A new ifr flag
IFF_MULTI_QUEUE were introduced to create a multiqueue backend by calling
TUNSETIFF with the this flag and with the same interface name many times.

A new ioctl TUNSETQUEUE were introduced. When doing this ioctl with
IFF_DETACH_QUEUE, the queue were disabled in the linux kernel. When doing this
ioctl with IFF_ATTACH_QUEUE, the queue were enabled in the linux kernel.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01 11:03:01 -06:00
Jason Wang 1ceef9f273 net: multiqueue support
This patch adds basic multiqueue support for qemu. The idea is simple, an array
of NetClientStates were introduced in NICState, parse_netdev() were extended to
find and match all NetClientStates belongs to the backend and place their
pointers in NICConf. Then qemu_new_nic can setup a N:N mapping between NICStates
that belongs to a nic and NICStates belongs to the netdev. And a queue_index
were introduced in NetClientState to track its index. After this, each peers of
a NICState were abstracted as a queue.

After this change, all NetClientState that belongs to the same backend/nic has
the same id. When use want to change the link status, all NetClientStates that
belongs to the same backend/nic will be also changed. When user want to delete
a device or netdev, all NetClientStates that belongs to the same backend/nic
will be deleted also. Changing or deleting an specific queue is not allowed.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01 11:03:01 -06:00
Jason Wang f7860455fd net: introduce NetClientState destructor
To allow allocating an array of NetClientState and free it once, this patch
introduces destructor of NetClientState. Which could do type specific free,
which could be used by multiqueue to free the array once.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01 11:03:01 -06:00
Jason Wang 18a1541a8d net: introduce qemu_net_client_setup()
This patch separates the setup of NetClientState from its allocation, this will
allow allocating an arrays of NetClientState and does the initialization one by
one which is what multiqueue needs.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01 11:03:01 -06:00
Jason Wang 6c51ae73fc net: introduce qemu_find_net_clients_except()
In multiqueue, all NetClientState that belongs to the same netdev or nic has the
same id. So this patches introduces an helper qemu_find_net_clients_except()
which finds all NetClientState with the same id. This will be used by multiqueue
networking.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01 11:03:01 -06:00
Jason Wang 948ecf219c net: intorduce qemu_del_nic()
To support multiqueue nic, this patch separate the nic destructor from
qemu_del_net_client() to a new helper qemu_del_nic() since the mapping bettween
NiCState and NetClientState were not 1:1 in multiqueue. The following patches
would refactor this function to support multiqueue nic.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01 11:03:01 -06:00
Jason Wang cc1f0f4542 net: introduce qemu_get_nic()
To support multiqueue, this patch introduces a helper qemu_get_nic() to get
NICState from a NetClientState. The following patches would refactor this helper
to support multiqueue.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01 11:03:00 -06:00
Jason Wang b356f76de3 net: introduce qemu_get_queue()
To support multiqueue, the patch introduce a helper qemu_get_queue()
which is used to get the NetClientState of a device. The following patches would
refactor this helper to support multiqueue.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01 11:02:55 -06:00
Jason Wang 28a65891a0 net: tap: use abort() instead of assert(0)
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01 10:50:59 -06:00
Jason Wang ec45f08313 net: tap: using bool instead of bitfield
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01 10:50:59 -06:00
Markus Armbruster c64f50d1e2 g_strdup(NULL) returns NULL; simplify
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-30 11:14:46 +01:00
Wenchao Xia 84f2d0ea0f HMP: add QDict to info callback handler
This patch change all info call back function to take
additional QDict * parameter, which allow those command
take parameter. Now it is set to NULL at default case.

Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-01-17 10:24:52 -02:00
Paolo Bonzini 4d4545743f qemu-option: move standard option definitions out of qemu-config.c
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-12 17:17:53 +01:00
Liming Wang 3f124b6874 net: add missing include file
To fix building error:

CC    net/vde.o
net/vde.c: In function ‘vde_cleanup’:
net/vde.c:65:5: error: implicit declaration of function ‘qemu_set_fd_handler’ [-Werror=implicit-function-declaration]
net/vde.c:65:5: error: nested extern declaration of ‘qemu_set_fd_handler’ [-Werror=nested-externs]
cc1: all warnings being treated as errors

Signed-off-by: Liming Wang <walimisdev@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-22 12:06:48 +00:00
Stefan Weil b2136140f6 net: Add missing include statement (fix compiler warnings for MinGW)
These and some more compiler warnings were caused by a recent commit:

net/tap-win32.c:724: warning: no previous prototype for ‘tap_has_ufo’
net/tap-win32.c:729: warning: no previous prototype for ‘tap_has_vnet_hdr’
...

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-22 12:05:46 +00:00
Anthony Liguori 27dd773058 Merge remote-tracking branch 'bonzini/header-dirs' into staging
* bonzini/header-dirs: (45 commits)
  janitor: move remaining public headers to include/
  hw: move executable format header files to hw/
  fpu: move public header file to include/fpu
  softmmu: move remaining include files to include/ subdirectories
  softmmu: move include files to include/sysemu/
  misc: move include files to include/qemu/
  qom: move include files to include/qom/
  migration: move include files to include/migration/
  monitor: move include files to include/monitor/
  exec: move include files to include/exec/
  block: move include files to include/block/
  qapi: move include files to include/qobject/
  janitor: add guards to headers
  qapi: make struct Visitor opaque
  qapi: remove qapi/qapi-types-core.h
  qapi: move inclusions of qemu-common.h from headers to .c files
  ui: move files to ui/ and include/ui/
  qemu-ga: move qemu-ga files to qga/
  net: reorganize headers
  net: move net.c to net/
  ...

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-12-19 17:15:39 -06:00
Paolo Bonzini 927d4878b0 softmmu: move remaining include files to include/ subdirectories
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19 08:32:46 +01:00
Paolo Bonzini 9c17d615a6 softmmu: move include files to include/sysemu/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19 08:32:45 +01:00
Paolo Bonzini 1de7afc984 misc: move include files to include/qemu/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19 08:32:39 +01:00
Paolo Bonzini 83c9089e73 monitor: move include files to include/monitor/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19 08:31:32 +01:00
Paolo Bonzini 7b1b5d1913 qapi: move include files to include/qobject/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19 08:31:31 +01:00
Paolo Bonzini 1422e32db5 net: reorganize headers
Move public headers to include/net, and leave private headers in net/.
Put the virtio headers in include/net/tap.h, removing the multiple copies
that existed.  Leave include/net/tap.h as the interface for NICs, and
net/tap_int.h as the interface for OS-specific parts of the tap backend.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19 08:31:29 +01:00
Paolo Bonzini fd9400b302 net: move net.c to net/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19 08:29:59 +01:00
Paolo Bonzini f8fe796407 janitor: do not include qemu-char everywhere
Touching char/char.h basically causes the whole of QEMU to
be rebuilt.  Avoid this, it is usually unnecessary.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19 08:29:59 +01:00
Zhi Yong Wu e103129b1b net, hub: fix the indent in the comments
Remove some redundant blanks in the comments of
net_hub_id_for_client().

Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2012-12-18 16:48:37 +01:00
Michael S. Tsirkin 89e6d68ef3 tap: reset vnet header size on open
For tap, we currently assume the vnet header size is 10
(the default value) but that might not be the case
if tap is persistent and has been used by qemu previously.
To fix, set vnet header size correctly on open.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-12-12 23:36:20 +02:00
Stefan Weil eac29d87c8 Fix spelling (prefered -> preferred)
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2012-12-07 12:34:11 +01:00
Michael S. Tsirkin 58ddcd50f3 tap: reset vnet header size on open
For tap, we currently assume the vnet header size is 10
(the default value) but that might not be the case
if tap is persistent and has been used by qemu previously.
To fix, set host header size in tap device on open.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2012-11-20 15:38:37 +01:00
Klaus Stengel 63d2960bc4 slirp: Add domain-search option to slirp's DHCP server
This patch will allow the user to include the domain-search option in
replies from the built-in DHCP server. The domain suffixes can be
specified by adding dnssearch= entries to the "-net user" parameter.

[Jan: tiny style adjustments]

Signed-off-by: Klaus Stengel <Klaus.Stengel@asamnet.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2012-11-15 10:27:14 +01:00
Lei Li f0e3ac7034 net: use "socket" model name for UDP sockets
Fix the problem that can not delete the udp socket.
It's caused by passing "udp" model to net_socket_udp_init,
but we do not have "udp" model in our model list.
Pass the right model "socket" to init function.

https://bugs.launchpad.net/qemu/+bug/1073585?comments=all

Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2012-11-01 11:00:59 +01:00
Michael S. Tsirkin aee0bf7d8d tap-win32: stubs to fix win32 build
Add missing stubs to win32 to fix link failure.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-10-30 19:18:53 +00:00
Stefan Weil 08778b3983 net/tap-win32: Fix compiler warning caused by missing include statement
The include file for net_init_tap was missing:

net/tap-win32.c:703:
 warning: no previous prototype for ‘net_init_tap’

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2012-10-19 10:39:35 +02:00
Paolo Bonzini a245fc1835 net: consolidate NetClientState header files into one
This patch doesn't seem much useful alone, I must admit.  However,
it makes sense as part of the upcoming directory reorganization,
where I want to have include/net/tap.h as the net<->hw interface
for tap.  Then having both net/tap.h and include/net/tap.h does
not work.  "Fixed" by moving all the init functions to a single
header file net/clients.h.

The patch also adopts a uniform style for including net/*.h files
from net/*.c, without the net/ path.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
2012-10-08 13:59:40 +02:00
Stefan Weil 73062dfe6b net/socket: Fix compiler warning (regression for MinGW)
Commit 213fd5087e removed a type cast
which is needed for MinGW:

net/socket.c:136: warning:
 pointer targets in passing argument 2 of ‘sendto’ differ in signedness
/usr/lib/gcc/amd64-mingw32msvc/4.4.4/../../../../amd64-mingw32msvc/include/winsock2.h:1313: note:
 expected ‘const char *’ but argument is of type ‘const uint8_t *’

Add a 'qemu_sendto' macro which provides that type cast where needed
and use the new macro instead of 'sendto'.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
2012-09-23 07:37:41 +01:00
Stefan Hajnoczi 45a7f54a8b net: EAGAIN handling for net/socket.c TCP
Replace spinning send_all() with a proper non-blocking send.  When the
socket write buffer limit is reached, we should stop trying to send and
wait for the socket to become writable again.

Non-blocking TCP sockets can return in two different ways when the write
buffer limit is reached:

1. ret = -1 and errno = EAGAIN/EWOULDBLOCK.  No data has been written.

2. ret < total_size.  Short write, only part of the message was
   transmitted.

Handle both cases and keep track of how many bytes have been written in
s->send_index.  (This includes the 'length' header before the actual
payload buffer.)

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-09-14 08:40:33 +01:00
Stefan Hajnoczi 213fd5087e net: EAGAIN handling for net/socket.c UDP
Implement asynchronous send for UDP (or other SOCK_DGRAM) sockets.  If
send fails with EAGAIN we wait for the socket to become writable again.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-09-14 08:40:33 +01:00
Stefan Hajnoczi 863f678fba net: asynchronous send/receive infrastructure for net/socket.c
The net/socket.c net client is not truly asynchronous.  This patch
borrows the qemu_set_fd_handler2() code from net/tap.c as the basis for
proper asynchronous send/receive.

Only read packets from the socket when the peer is able to receive.
This avoids needless queuing.

Later patches implement asynchronous send.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-09-14 08:40:33 +01:00
Stefan Hajnoczi 61518a74ca net: broadcast hub packets if at least one port can receive
In commit 60c07d933c ("net: fix
qemu_can_send_packet logic") the "VLAN" broadcast behavior was changed
to queue packets if any net client cannot receive.  It turns out that
this was not actually the right fix and just hides the real bug that
hw/usb/dev-network.c:usbnet_receive() clobbers its receive buffer when
called multiple times in a row.  The commit also introduced a new bug
that "VLAN" packets would not be sent if one of multiple net clients was
down.

The hw/usb/dev-network.c bug has since been fixed, so this patch reverts
broadcast behavior to send packets as long as one net client can
receive.  Packets simply get queued for the net clients that are
temporarily unable to receive.

Reported-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-09-14 08:40:33 +01:00
Stefan Hajnoczi 06b5f36d05 net: do not report queued packets as sent
Net send functions have a return value where 0 means the packet has not
been sent and will be queued.  A non-zero value means the packet was
sent or an error caused the packet to be dropped.

This patch fixes two instances where packets are queued but we return
their size.  This causes callers to believe the packets were sent.  When
the caller uses the async send interface this creates a real problem
because the callback will be invoked for a packet that the caller
believed to be already sent.  This bug can cause double-frees in the
caller.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-09-14 08:40:32 +01:00
Paolo Bonzini 987a9b4800 net: notify iothread after flushing queue
virtio-net has code to flush the queue and notify the iothread
whenever new receive buffers are added by the guest.  That is
fine, and indeed we need to do the same in all other drivers.
However, notifying the iothread should be work for the network
subsystem.  And since we are at it we can add a little smartness:
if some of the queued packets already could not be delivered,
there is no need to notify the iothread.

Reported-by: Luigi Rizzo <rizzo@iet.unipi.it>
Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Cc: Jan Kiszka <jan.kiszka@siemens.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Amos Kong <akong@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-09-14 08:40:31 +01:00
Nicholas Bellinger a96ed02fc7 monitor: Rename+move net_handle_fd_param -> monitor_handle_fd_param
This patch renames+moves the net_handle_fd_param() caller used to
obtain a file descriptor from either qemu_parse_fd() (the normal case)
or from monitor_get_fd() (migration case) into a generically prefixed
monitor_handle_fd_param() to be used by vhost-scsi code.

Also update net/[socket,tap].c consumers to use the new prefix.

Reported-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-09-07 09:15:08 +03:00
Blue Swirl 427a1a2cb1 qapi: avoid reserved keywords
Clang compiler complained about use of reserved word 'restrict' in SLIRP
and QAPI.

Prefix C keywords with "q_", adjust SLIRP accordingly.

Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-09 18:34:57 +00:00
Zhi Yong Wu 011de2b512 net: add the support for -netdev socket, listen
The -net socket,listen option does not work with the newer -netdev
syntax:
 http://lists.gnu.org/archive/html/qemu-devel/2011-11/msg01508.html

This patch makes it work now.

For the case where one vlan has multiple listenning sockets,
the patch will also provide the support.

Supported syntax:
 1.) -net socket,listen=127.0.0.1:1234,vlan=0
 2.) -net socket,listen=127.0.0.1:1234,vlan=0 -net socket,listen=127.0.0.1:1235,vlan=0
 3.) -netdev socket,listen=127.0.0.1:1234,id=socket0

 Drop the NetSocketListenState struct and add a listen_fd field
to NetSocketState.  When a -netdev socket,listen= instance is created
there will be a NetSocketState with fd=-1 and a valid listen_fd.  The
net_socket_accept() handler waits for listen_fd to become readable and
then accepts the connection.  When this state transition happens, we no
longer monitor listen_fd for incoming connections...until the client
disconnects again.

Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2012-08-01 13:32:11 +01:00
Zhi Yong Wu e34cde35e7 net: fix the coding style
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2012-08-01 13:32:11 +01:00
Zhi Yong Wu 52a3cb869f hub: add the support for hub own flow control
Only when all other hub port's *peer* .can_receive() all return 1,
the source hub port .can_receive() return 1.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2012-08-01 13:32:11 +01:00
Zhi Yong Wu 691a4f3a95 net: determine if packets can be sent before net queue deliver packets
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2012-08-01 13:32:11 +01:00
Zhi Yong Wu 86a77c3858 net: cleanup deliver/deliver_iov func pointers
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2012-08-01 13:32:11 +01:00
Zhi Yong Wu 1a8595931a net: Make "info network" output more readable info
Reviewed-by: Jan Kiszka  <jan.kiszka@siemens.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2012-08-01 13:32:11 +01:00
Stefan Hajnoczi b20c6b9e47 net: Rename qemu_del_vlan_client() to qemu_del_net_client()
Another step in moving the vlan feature out of net core.  Users only
deal with NetClientState and therefore qemu_del_vlan_client() should be
named qemu_del_net_client().

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2012-08-01 13:32:10 +01:00
Stefan Hajnoczi 35277d14ec net: Rename vc local variables to nc
Now that VLANClientState has been renamed to NetClientState all 'vc'
local variables should be 'nc'.  Much of the code already used 'nc' but
there are places where 'vc' needs to be renamed.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2012-08-01 13:32:10 +01:00
Stefan Hajnoczi 4e68f7a081 net: Rename VLANClientState to NetClientState
The vlan feature is no longer part of net core.  Rename VLANClientState
to NetClientState because net clients are not explicitly associated with
a vlan at all, instead they have a peer net client to which they are
connected.

This patch is a mechanical search-and-replace except for a few
whitespace fixups where changing VLANClientState to NetClientState
misaligned whitespace.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2012-08-01 13:32:10 +01:00
Zhi Yong Wu 606c10e2bd net: Convert qdev_prop_vlan to peer with hub
Instead of using VLANState use net/hub.h to support the vlan qdev
property.  The vlan qdev property becomes an alias for the peer qdev
property but is represented as a VLAN ID number.  When a VLAN ID is
selected the device will really peer with a hub port.

Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2012-08-01 12:28:51 +01:00
Stefan Hajnoczi ab5f3f84c4 net: Drop vlan argument to qemu_new_net_client()
Since hubs are now used to implement the 'vlan' feature and the vlan
argument is always NULL, remove the argument entirely and update all net
clients that use qemu_new_net_client().

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2012-08-01 12:28:51 +01:00
Stefan Hajnoczi 81017645e4 hub: Check that hubs are configured correctly
Checks can be performed to make sure that hubs have at least one NIC and
one host device, warning the user if this is not the case.
Configurations which do not meet this rule tend to be broken but just
emit a warning.  This patch preserves compatibility with the checks
performed by net core on vlans.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2012-08-01 12:28:51 +01:00
Stefan Hajnoczi 90d87a33c7 net: Look up 'vlan' net clients using hubs
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2012-08-01 12:28:51 +01:00
Stefan Hajnoczi d33d93b2c4 net: Use hubs for the vlan feature
Stop using the special-case vlan code in net.c.  Instead use the hub net
client to implement the vlan feature.  The next patch will remove vlan
code from net.c completely.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2012-08-01 12:28:51 +01:00
Stefan Hajnoczi f6c874e300 net: Add a hub net client
The vlan feature can be implemented in terms of hubs.  By introducing a
hub net client it becomes possible to remove the special case vlan code
from net.c and push the vlan feature out of generic networking code.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2012-08-01 12:28:51 +01:00
Laszlo Ersek 1a0c09583d remove unused QemuOpts parameter from net init functions
v1->v2:
- unchanged

v2->v3:
- keep "qemu-option.h" included in "net/slirp.h"

Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-23 11:55:18 +01:00
Laszlo Ersek f79b51b081 convert net_init_bridge() to NetClientOptions
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-23 11:55:18 +01:00
Laszlo Ersek 08c573a8d1 convert net_init_tap() to NetClientOptions
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-23 11:55:18 +01:00
Laszlo Ersek 4a917c39ae convert net_init_vde() to NetClientOptions
v1->v2:
- NetdevVdeOptions::port and ::mode are of type uint16. Remove superfluous
  range checks.

Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-23 11:55:18 +01:00
Laszlo Ersek bef8e8fe07 convert net_init_socket() to NetClientOptions
I "reverse engineered" the following permissions between the -socket
sub-options:

             fd  listen  connect  mcast  udp | localaddr
  fd         x   .       .        .      .   | .
  listen     .   x       .        .      .   | .
  connect    .   .       x        .      .   | .
  mcast      .   .       .        x      .   | x
  udp        .   .       .        .      x   | x
  -------------------------------------------+
  localaddr  .   .       .        x      x     x

I transformed the code accordingly. The real fix would be to embed "fd",
"listen", "connect", "mcast" and "udp" in a separate union. However
OptsVisitor's enum parser only supports the type=XXX QemuOpt instance as
union discriminator.

Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-23 11:55:18 +01:00
Laszlo Ersek 094f15c5c8 convert net_init_slirp() to NetClientOptions
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-23 11:55:18 +01:00
Laszlo Ersek 848040d174 convert net_init_dump() to NetClientOptions
v1->v2:
- NetdevDumpOptions::len is of type 'size', whose C type was changed to
  uint64_t. Adapt the printf() format specifier macro.

Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-23 11:55:18 +01:00
Laszlo Ersek 6687b79d63 convert net_client_init() to OptsVisitor
The net_client_init() prototype is kept intact.

Based on "is_netdev", the QemuOpts-rooted QemuOpt-list is parsed as a
Netdev or a NetLegacy. The original meat of net_client_init() is moved to
and simplified in net_client_init1():

Fields not common between -net and -netdev are clearly separated. Getting
the name for the init functions is cleaner: Netdev::id is mandatory, and
all init functions handle a NULL NetLegacy::name. NetLegacy::vlan
explicitly depends on -net (see below).

Verifying the "type=" option for -netdev can be turned into a switch.

Format validation with qemu_opts_validate() can be removed because the
visitor covers it. Relatedly, the "net_client_types" array is reduced to
an array of init functions that can be directly indexed by opts->kind.
(Help text is available in the schema JSON.)

The outermost negation in the condition around qemu_find_vlan() was
flattened, because it expresses the dependent code's requirements more
clearly.

VLAN lookup is avoided if there's no init function to pass the VLAN to.

Whenever the value of type=... is needed, we substitute
NetClientOptionsKind_lookup[kind].

The individual init functions are not converted yet, thus the original
QemuOpts instance is passed transparently.

v1->v2:
- NetLegacy::name is optional. Tracked it through all init functions: they
  all handle a NULL name. Updated commit message accordingly.

v2->v3:
- NetLegacy::id is allowed and takes precedence over NetLegacy::name.

Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-23 11:55:18 +01:00
Laszlo Ersek 2be64a68ed hw, net: "net_client_type" -> "NetClientOptionsKind" (qapi-generated)
NET_CLIENT_TYPE_ -> NET_CLIENT_OPTIONS_KIND_

Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-23 11:55:18 +01:00
Jan Kiszka 22a61f365d slirp: Improve error reporting of inaccessible smb directories
Instead of guessing, print the error code returned by access.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2012-07-09 17:39:24 +02:00
Dunrong Huang 927d811b28 slirp: Ensure smbd and shared directory exist when enable smb
Users may pass the following parameters to qemu:
    $ qemu-kvm -net nic -net user,smb= ...
    $ qemu-kvm -net nic -net user,smb ...
    $ qemu-kvm -net nic -net user,smb=bad_directory ...

In these cases, qemu started successfully while samba server
failed to start. Users will confuse since samba server
failed silently without any indication of what it did wrong.

To avoid it, we check whether the shared directory exist and
if users have permission to access this directory when QEMU's
"built-in" SMB server is enabled.

Signed-off-by: Dunrong Huang <riegamaths@gmail.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2012-07-09 17:38:13 +02:00
Alexander Graf b412eb61bf slirp: add 'cmd:' target for guestfwd
When using guestfwd=, Qemu only connects the virtual server's TCP port
to a single chardev. This is useless in most cases, as we usually want
to have more than a single connection from the guest to the outside world.

This patch adds a new cmd: target to guestfwd= that allows for execution
of a command on every TCP connection. This leverages the same code as
the -smb parameter, just that here the command is user defined.

Reported-by: Sascha Wilde <wilde@intevation.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2012-07-09 17:38:13 +02:00
Jan Kiszka 1cb1c5d10b slirp: Enforce host-side user of smb share
Windows 7 (and possibly other versions) cannot connect to the samba
share if the exported host directory is not world-readable. This can be
resolved by forcing the username used for access checks to the one
under which QEMU and smbd are running.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2012-07-09 17:38:13 +02:00
Paolo Bonzini 37003adf96 qmp: include monitor.h when needed
This is needed to get file descriptors from SCM_RIGHTS.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-06-15 10:41:05 -03:00
Michael Tokarev 3294ce1893 do not include <libutil.h> needlessly or if it doesn't exist
<libutil.h> and <util.h> on *BSD (some have one, some another)
were #included just for openpty() declaration.  The only file
where this function is actually used is qemu-char.c.

In vl.c and net/tap-bsd.c, none of functions declared in libutil.h
(login logout logwtmp timdomain openpty forkpty uu_lock realhostname
fparseln and a few others depending on version) are used.

Initially the code which is currently in qemu-char.c was in vl.c,
it has been removed into separate file in commit 0e82f34d07
Fri Oct 31 18:44:40 2008, but the #includes were left in vl.c.
So with vl.c, we just remove includes - libutil.h, util.h and
pty.h (which declares only openpty() and forkpty()) from there.

The code in net/tap-bsd.c, which come from net/tap.c, had this

commit 5281d757ef
Author: Mark McLoughlin <markmc@redhat.com>
Date:   Thu Oct 22 17:49:07 2009 +0100

    net: split all the tap code out into net/tap.c

Note this commit not only moved stuff out of net.c to net/tap.c,
but also rewrote large portions of the tap code, and added these
completely unnecessary #includes -- as usual, I question why such
a misleading commit messages are allowed.

Again, no functions defined in libutil.h or util.h on *BSD are
used by neither net/tap.c nor net/tap-bsd.c.  Removing them.

And finally, the only real user for these #includes, qemu-char.c,
which actually uses openpty().  There, the #ifdef logic is wrong.
A GLIBC-based system has <pty.h>, even if it is a variant of *BSD.
So __GLIBC__ should be checked first, and instead of trying to
include <libutil.h> or <util.h>, we include <pty.h>.  If it is not
GLIBC-based, we check for variations between <*util.h> as before.

This patch fixes build of qemu 1.1 on Debian/kFreebsd (well, one
of the two problems): it is a distribution with a FreeBSD kernel,
so it #defines at least __FreeBSD_kernel__, but since it is based
on GLIBC, it has <pty.h>, but current version does not have neither
<util.h> nor <libutil.h>, which the code tries to include 3 times
but uses only once.

Signed-off-By: Michael Tokarev <mjt@tls.msk.ru>
Cc: Aurelien Jarno <aurelien@aurel32.net>

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-06-09 10:30:08 +00:00
Paolo Bonzini d8469de6c1 build: move net/ objects to nested Makefile.objs
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-06-07 09:21:13 +02:00
Luiz Capitulino 42dcc547e1 net: purge the monitor object from all init functions
The only backend that really uses it is the socket one, which calls
monitor_get_fd(). But it can use 'cur_mon' instead.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-By: Laszlo Ersek <lersek@redhat.com>
2012-06-04 13:49:35 -03:00
Nikolaus Rath 276eda5735 Declare state directory in smb.conf
The smb.conf generated by the userspace networking does not include a state directory
directive. Samba therefore falls back to the default value. Since the user generally
does not have write access to this path, smbd immediately crashes.

The "state directory" option was added in Samba 3.4.0 (commit
http://gitweb.samba.org/?p=samba.git;a=commit;h=7b02e05eb64f3ffd7aa1cf027d10a7343c0da757).

This patch adds the missing option.

Signed-off-by: Nikolaus Rath <Nikolaus@rath.org>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2012-05-01 19:08:44 -03:00
Nikolaus Rath de305b1387 slirp: don't use "smb ports = 0" option
The "smb ports = 0" option causes recent samba versions to crash. It was
introduced in commit 157777ef3e with log message "Samba 3 support".
However, a value of 0 has never been officially supported by smb and is
also not necessary: if stdin is a socket, smb does not try to listen on
any ports and uses just stdin. This is necessary to support inetd based
operation (otherwise smbd would always fail when called from inetd,
because inetd already listens on the SMB port). Since samba has
supported inetd operation since pre-3.x, it should be safe to rely on
this feature. I have tested it with Samba 3.6.4 -- communication works
fine, and smbd is not listening on any ports.

I suspect the "smb ports = 0" hack may have been introduced when someone
tested the qemu generated samba config from the command line with "smbd
-i" and found it to fail (because then stdin isn't a socket).

Signed-off-by: Nikolaus Rath <Nikolaus@rath.org>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2012-05-01 19:08:44 -03:00
Benjamin MARSILI da8d605733 net: remove extra spaces in help messages
Signed-off-by: Benjamin MARSILI <mlspirat42@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-02-10 10:44:52 +00:00
Stefan Weil 4c32fe66b9 Change license from GPLv2 to GPLv2+
This file only contains code from Red Hat, so it can use GPLv2+.
Tested with `git blame -M -C net/checksum.c`.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-01 16:24:54 -06:00
Corey Bryant a7c36ee492 Add support for net bridge
The most common use of -net tap is to connect a tap device to a bridge.  This
requires the use of a script and running qemu as root in order to allocate a
tap device to pass to the script.

This model is great for portability and flexibility but it's incredibly
difficult to eliminate the need to run qemu as root.  The only really viable
mechanism is to use tunctl to create a tap device, attach it to a bridge as
root, and then hand that tap device to qemu.  The problem with this mechanism
is that it requires administrator intervention whenever a user wants to create
a guest.

By essentially writing a helper that implements the most common qemu-ifup
script that can be safely given cap_net_admin, we can dramatically simplify
things for non-privileged users.  We still support existing -net tap options
as a mechanism for advanced users and backwards compatibility.

Currently, this is very Linux centric but there's really no reason why it
couldn't be extended for other Unixes.

A typical invocation would be similar to one of the following:

  qemu linux.img -net bridge -net nic,model=virtio

  qemu linux.img -net tap,helper="/usr/local/libexec/qemu-bridge-helper"
                 -net nic,model=virtio

  qemu linux.img -netdev bridge,id=hn0
                 -device virtio-net-pci,netdev=hn0,id=nic1

  qemu linux.img -netdev tap,helper="/usr/local/libexec/qemu-bridge-helper",id=hn0
                 -device virtio-net-pci,netdev=hn0,id=nic1

The default bridge that we attach to is br0.  The thinking is that a distro
could preconfigure such an interface to allow out-of-the-box bridged networking.

Alternatively, if a user wants to use a different bridge, a typical invocation
would be simliar to one of the following:

  qemu linux.img -net bridge,br=qemubr0 -net nic,model=virtio

  qemu linux.img -net tap,helper="/usr/local/libexec/qemu-bridge-helper --br=qemubr0"
                 -net nic,model=virtio

  qemu linux.img -netdev bridge,br=qemubr0,id=hn0
                 -device virtio-net-pci,netdev=hn0,id=nic1

  qemu linux.img -netdev tap,helper="/usr/local/libexec/qemu-bridge-helper --br=qemubr0",id=hn0
                 -device virtio-net-pci,netdev=hn0,id=nic1

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Richa Marwaha <rmarwah@linux.vnet.ibm.com>
Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-01 16:24:40 -06:00
Paolo Bonzini 6b620ca3b0 prepare for future GPLv2+ relicensing
All files under GPLv2 will get GPLv2+ changes starting tomorrow.
event_notifier.c and exec-obsolete.h were only ever touched by Red Hat
employees and can be relicensed now.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-01-13 10:55:56 -06:00
Benjamin 0e0e7facc7 Support for UDP unicast network backend
Signed-off-by: Benjamin MARSILI <mlspirat42@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-01-12 10:34:20 -06:00
Peter Maydell a46667ea29 net/socket.c: Fix fd leak in net_socket_listen_init() error paths
Fix a leak of a file descriptor due to missing closesocket() calls
in error paths in net_socket_listen_init().

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-01-06 15:07:14 +00:00
Hervé Poussineau 0fa29915cd net: store guest timestamp in dump file instead of time since guest startup
Stored dates are no more 1970-01-01 (+ run time), but have a real meaning.
If someone wants to have comparable timestamps accross boots, it is
possible to start qemu with -rtc to give the startup date.

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-12-20 15:44:30 -06:00
Hervé Poussineau 6514ed528c net: truncate output file when using dump backend
This prevents data of a previous run to be seen in the new dump file.

Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-12-20 15:44:29 -06:00
Geoffrey Thomas b15ba6c951 slirp: Fix typo in net_slirp_hostfwd_remove
Report an error when err is nonzero, not when it is zero.

Signed-off-by: Geoffrey Thomas <geofft@ldpreload.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-19 10:42:44 +00:00
Michael Roth 885660bd48 network scripts: don't block SIGCHLD before forking
This patch fixes a bug where child processes of launch_script() can
misbehave due to SIGCHLD being blocked. In the case of `sudo`, this
causes a permanent hang.

Previously a SIGCHLD handler was added to reap fork_exec()'d zombie
processes by calling waitpid(-1, ...). This required other
fork()/waitpid() callers to temporarilly block SIGCHILD to avoid
having the final wait status being intercepted by the SIGCHLD
handler:

7c3370d4fe

Since then, the qemu_add_child_watch() interface was added to allow
registration of such processes and reap only from that specific set
of PIDs:

4d54ec7898

As a result, we can now avoid blocking SIGCHLD in launch_script(), so
drop that behavior.

Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-12-15 10:22:40 -06:00
Anthony Liguori 9423a2e8dd Merge remote-tracking branch 'stefanha/trivial-patches-next' into staging 2011-12-14 07:59:21 -06:00
Stefan Hajnoczi e5d1fca0f2 net: take ownership of fd in socket init functions
Today net/socket.c has no consistent policy for closing the socket file
descriptor when initialization fails.  This means we leak the file
descriptor in some cases or we could also try to close it twice.

Make error paths consistent by taking ownership of the file descriptor
and closing it on error.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-12-12 17:06:21 -06:00
Stefan Hajnoczi 842480d493 net: expand tabs in net/socket.c
In order to make later patches sane, expand the tab characters and
conform to QEMU coding style now.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-12-12 17:06:21 -06:00
Dong Xu Wang 3a93113a00 fix typo: delete redundant semicolon
Double semicolons should be single.

Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-06 09:56:41 +00:00
Zhi Hui Li c7ee8f683d net/socket.c : fix memory leak
Signed-off-by: Li Zhi Hui <zhihuili@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-06 09:56:41 +00:00
Markus Armbruster e30e5eb613 slirp: Clean up net_slirp_hostfwd_remove()'s use of get_str_sep()
get_str_sep() can fail, but net_slirp_hostfwd_remove() doesn't check.
Works, because it initializes buf[] to "", which get_str_sep() doesn't
touch when it fails.  Coverity doesn't like it, and neither do I.

Change it to work exactly like slirp_hostfwd().

Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-11-22 11:11:23 +00:00
Luiz Capitulino 93a7320e32 net: tap-linux: Fix unhelpful error message
I'm getting:

    could not configure /dev/net/tun (tap%d): Operation not permitted

When the ioctl() fails, ifr.ifr_name will most likely not be overwritten.
So we better only use it when ifname contains a string.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-11-01 06:23:48 +00:00
Brad e2d8830efc Allow overriding the location of Samba's smbd.
Allow overriding the location of Samba's smbd.

Pretty much every OS I look at has some means of
changing this path (patching) so lets just make
it easier for OS developers creating packages
and/or end users to override the location.

Signed-off-by: Brad Smith <brad@comstyle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-03 17:45:48 +00:00
Anthony Liguori 27143a445b char: rename qemu_chr_open() -> qemu_chr_new()
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-22 10:17:43 -05:00
Anthony Liguori 7267c0947d Use glib memory allocation and free functions
qemu_malloc/qemu_free no longer exist after this commit.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-20 23:01:08 -05:00
Brad 23ddf2bb1e Fix forcing multicast msgs to loopback on OpenBSD.
Fix forcing multicast msgs to loopback on OpenBSD.
e.g.
$ sudo qemu -m 128 -no-fd-bootchk \
        -hda virtual.img -boot n -nographic \
        -net nic,vlan=0,model=rtl8139,macaddr=52:54:00:12:34:03 \
        -net user -tftp /usr/src/sys/arch/i386/compile/TEST -bootp pxeboot \
        -net nic,vlan=1,model=rtl8139,macaddr=52:54:00:23:03:01 \
        -net tap,vlan=1,script=no \
        -net nic,vlan=3,model=rtl8139,macaddr=52:54:00:23:03:03 \
        -net socket,vlan=3,mcast=230.0.0.1:10003
setsockopt(SOL_IP, IP_MULTICAST_LOOP): Invalid argument
qemu: -net socket,vlan=3,mcast=230.0.0.1:10003: Device 'socket' could not be initialized

Signed-off-by: Brad Smith <brad@comstyle.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-08-07 11:06:43 +00:00
Manuel Bouyer 45c245bf80 Fix network interface tap backend
Fix network interface tap backend work on NetBSD.
It uses an ioctl to get the tap name.

Signed-off-by: Christoph Egger<Christoph.Egger@amd.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-08-07 09:48:59 +00:00
Blue Swirl 00aa0040e8 Wrap recv to avoid warnings
Avoid warnings like these by wrapping recv():
  CC    slirp/ip_icmp.o
/src/qemu/slirp/ip_icmp.c: In function 'icmp_receive':
/src/qemu/slirp/ip_icmp.c:418:5: error: passing argument 2 of 'recv' from incompatible pointer type [-Werror]
/usr/local/lib/gcc/i686-mingw32msvc/4.6.0/../../../../i686-mingw32msvc/include/winsock2.h:547:32: note: expected 'char *' but argument is of type 'struct icmp *'

Remove also casts used to avoid warnings.

Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-25 14:38:56 +00:00
Jan Kiszka 6f7b3b1be2 net: Refactor net_client_types
Position entries of net_client_types according to the corresponding
values of NET_CLIENT_TYPE_*. The array size is now defined by
NET_CLIENT_TYPE_MAX. This will allow to obtain entries based on type
value in later patches.

At this chance rename NET_CLIENT_TYPE_SLIRP to NET_CLIENT_TYPE_USER for
the sake of consistency.

CC: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-23 10:19:50 -05:00