The exception return address for nios2 is the instruction
after the one that was executing at the time of the exception.
We have so far implemented this by advancing the pc during the
process of raising the exception. It is perhaps a little less
confusing to do this advance in the translator (and helpers)
when raising the exception in the first place, so that we may
more closely match kernel sources.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220421151735.31996-58-richard.henderson@linaro.org>
This is the cpu side of the operation. Register one irq line,
called EIC. Split out the rather different processing to a
separate function.
Delay initialization of gpio irqs until realize. We need to
provide a window after init in which the board can set eic_present.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220421151735.31996-57-richard.henderson@linaro.org>
Unaligned traps are optional, but required with an mmu.
Turn them on always, because the fallback behaviour undefined.
Enable alignment checks in the config file.
Unwind the guest pc properly from do_unaligned_access.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-48-richard.henderson@linaro.org>
Division may (optionally) raise a division exception.
Since the linux kernel has been prepared for this for
some time, enable it by default.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-42-richard.henderson@linaro.org>
The 4 lower bits, D, PERM, BAD, DBL, are unconditionally set on any
exception with EH=0, or so says Table 42 (Processor Status After
Taking Exception).
We currently do not set PERM or BAD at all, and only set/clear
DBL for tlb miss, and do not clear DBL for any other exception.
It is a bit confusing to set D in tlb_fill and the rest during
do_interrupt, so move the setting of D to do_interrupt as well.
To do this, split EXP_TLBD into two cases, EXCP_TLB_X and EXCP_TLB_D,
which allows us to distinguish them during do_interrupt. Choose
a value for EXCP_TLB_D such that when truncated it produces the
correct value for exception.CAUSE.
Rename EXCP_TLB[RWX] to EXCP_PERM_[RWX], to emphasize that the
exception is permissions related. Rename EXCP_SUPER[AD] to
EXCP_SUPERA_[DX] to emphasize that they are both "supervisor
address" exceptions, data and execute.
Retain the setting of tlbmisc.WE for the fast-tlb-miss path, as it
is being relied upon, but remove it from the permission path.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-37-richard.henderson@linaro.org>
The register is entirely read-only for software, and we do not
implement ECC, so we need not deposit the cause into an existing
value; just create a new value from scratch.
Furthermore, exception.CAUSE is not written for break exceptions.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-36-richard.henderson@linaro.org>
While some of the plumbing for misaligned data is present, in the form
of nios2_cpu_do_unaligned_access, the hook will not be called because
TARGET_ALIGNED_ONLY is not set in configs/targets/nios2-softmmu.mak.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220421151735.31996-35-richard.henderson@linaro.org>
Performing this early means that we can merge more cases
within the non-logging switch statement.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-34-richard.henderson@linaro.org>
Split out do_exception and do_iic_irq to handle bulk of the interrupt and
exception processing. Parameterize the changes required to cpu state.
The status.EH bit, which protects some data against double-faults,
is only present with the MMU. Several exception cases did not check
for status.EH being set, as required.
The status.IH bit, which had been set by EXCP_IRQ, is exclusive to
the external interrupt controller, which we do not yet implement.
The internal interrupt controller, when the MMU is also present,
sets the status.EH bit.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-33-richard.henderson@linaro.org>
Decode 'break 1' during translation, rather than doing
it again during exception processing.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-32-richard.henderson@linaro.org>
Use FIELD_EX32 and FIELD_DP32 instead of managing the
masking by hand.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-30-richard.henderson@linaro.org>
WE is the architectural name of the field, not WR.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-29-richard.henderson@linaro.org>
Use FIELD_EX32 and FIELD_DP32 instead of manual manipulation
of the fields.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-27-richard.henderson@linaro.org>
Use FIELD_DP32 instead of manual shifting and masking.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-26-richard.henderson@linaro.org>
Place the control registers into their own array, env->ctrl[].
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-23-richard.henderson@linaro.org>
It is cleaner to have a separate name for this variable.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-17-richard.henderson@linaro.org>
Remove the #ifdef !defined(CONFIG_USER_ONLY) that surrounds
the whole file, and move helper.c to nios2_softmmu_ss.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220421151735.31996-12-richard.henderson@linaro.org>
Since f5ef0e518d, we have a real page mapped for kuser,
which means the special casing for SIGSEGV can go away.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220421151735.31996-11-richard.henderson@linaro.org>
Since 7827168471, this function is unused for user-only,
when the TCGCPUOps.do_interrupt hook itself became system-only.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220421151735.31996-10-richard.henderson@linaro.org>
Because the linux-user kuser page handling is currently implemented
by detecting magic addresses in the unnamed 0xaa trap, we cannot
simply remove nios2_cpu_tlb_fill and rely on the fallback code.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We want to move the semihosting code out of hw/ in the next patch.
This patch contains the mechanical steps, created using:
$ git mv include/hw/semihosting/ include/
$ sed -i s,hw/semihosting,semihosting, $(git grep -l hw/semihosting)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210226131356.3964782-2-f4bug@amsat.org>
Message-Id: <20210305135451.15427-2-alex.bennee@linaro.org>
In preparation for having some more common semihosting code let's
excise the current config magic from vl.c into its own file. We shall
later add more conditionals to the build configurations so we can
avoid building this if we don't need it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
We can now use the CPUClass hook instead of a named function.
Create a static tlb_fill function to avoid other changes within
cputlb.c. This also isolates the asserts within. Remove the
named tlb_fill function from all of the targets.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Remove the leftover debugging cpu_dump_state.
Cc: Chris Wulff <crwulff@gmail.com>
Cc: Marek Vasut <marex@denx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This patch adds support for libgloss semihosting to Nios II bare-metal
emulation. The specification for the protocol can be found in the
libgloss sources.
Signed-off-by: Sandra Loosemore <sandra@codesourcery.com>
Signed-off-by: Julian Brown <julian@codesourcery.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1554321185-2825-3-git-send-email-sandra@codesourcery.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
CPUClass method dump_statistics() takes an fprintf()-like callback and
a FILE * to pass to it. Most callers pass fprintf() and stderr.
log_cpu_state() passes fprintf() and qemu_log_file.
hmp_info_registers() passes monitor_fprintf() and the current monitor
cast to FILE *. monitor_fprintf() casts it right back, and is
otherwise identical to monitor_printf().
The callback gets passed around a lot, which is tiresome. The
type-punning around monitor_fprintf() is ugly.
Drop the callback, and call qemu_fprintf() instead. Also gets rid of
the type-punning, since qemu_fprintf() takes NULL instead of the
current monitor cast to FILE *.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-15-armbru@redhat.com>
This cleanup makes the number of objects depending on qapi/error.h
drop from 1910 (out of 4743) to 1612 in my "build everything" tree.
While there, separate #include from file comment with a blank line,
and drop a useless comment on why qemu/osdep.h is included first.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-5-armbru@redhat.com>
[Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
The MC68040 MMU provides the size of the access that
triggers the page fault.
This size is set in the Special Status Word which
is written in the stack frame of the access fault
exception.
So we need the size in m68k_cpu_unassigned_access() and
m68k_cpu_handle_mmu_fault().
To be able to do that, this patch modifies the prototype of
handle_mmu_fault handler, tlb_fill() and probe_write().
do_unassigned_access() already includes a size parameter.
This patch also updates handle_mmu_fault handlers and
tlb_fill() of all targets (only parameter, no code change).
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180118193846.24953-2-laurent@vivier.eu>
applied using ./scripts/clean-includes
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Add support for emulating Altera NiosII R1 architecture into qemu.
This patch is based on previous work by Chris Wulff from 2012 and
updated to latest mainline QEMU.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chris Wulff <crwulff@gmail.com>
Cc: Jeff Da Silva <jdasilva@altera.com>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Sandra Loosemore <sandra@codesourcery.com>
Cc: Yves Vandervennet <yvanderv@altera.com>
Cc: Alexander Graf <agraf@suse.de>
Message-Id: <20170118220146.489-3-marex@denx.de>
[rth: Remove tlb_flush from nios2_cpu_reset.]
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson
Philippe Mathieu-Daudé
Alex Bennée
Sandra Loosemore
Markus Armbruster
Laurent Vivier
Chris Wulff