It's cleaner and removes the curious '+ 1' required to skip the DMA
IRQ line of the controller.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
To avoid the SPI transactions fetching instructions from the FMC CE0
flash device and speed up boot, a ROM can be created if a drive is
available.
Reverse the logic to allow a machine to boot without a drive, using a
block device instead :
-blockdev node-name=fmc0,driver=file,filename=/path/to/flash.img \
-device mx66u51235f,bus=ssi.0,drive=fmc0
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The default boot address of the Aspeed SoCs is 0x0. For this reason,
the FMC flash device contents are remapped by HW on the first 256MB of
the address space. In QEMU, this is currently done in the machine init
with the setup of a region alias.
Move this code to the SoC and introduce an extra container to prepare
ground for the boot ROM region which will overlap the FMC flash
remapping.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This patch support Tiogapass in QEMU environment.
and introduced EEPROM BMC FRU data support "add tiogapass_bmc_fruid data"
along with the machine support.
Signed-off-by: Karthikeyan Pasupathi <pkarthikeyan1509@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: - commit log topic update
- checkpatch issues
- Documentation update ]
Message-Id: <20230216184342.253868-1-pkarthikeyan1509@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This patch support Yosemitev2 in QEMU environment.
and introduced EEPROM BMC FRU data support "add fbyv2_bmc_fruid data"
along with the machine support.
Signed-off-by: Karthikeyan Pasupathi <pkarthikeyan1509@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: - commit log topic update
- Documentation update ]
Message-Id: <20230216133326.216017-1-pkarthikeyan1509@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The Aspeed 2600 I2C controller supports a slave mode which can be
tested with the I2C echo device. Test extracted from :
https://lists.nongnu.org/archive/html/qemu-devel/2022-06/msg00183.html
Suggested-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Add an example I2C device to demonstrate how a slave may master the bus
and send data asynchronously to another slave.
The device will echo whatever it is sent to the device identified by the
first byte received.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
[ clg: integrated fixes :
https://lore.kernel.org/qemu-devel/Y3yMKAhOkYGtnkOp@cormorant.local/ ]
Message-Id: <20220601210831.67259-7-its@irrelevant.dk>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
It is not given that the current master will release the bus after a
transfer ends. Only schedule a pending master if the bus is idle.
Fixes: 37fa5ca426 ("hw/i2c: support multiple masters")
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Message-Id: <20221116084312.35808-2-its@irrelevant.dk>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The auto completion does not work in some cases.
Case 1.
1. (qemu) info reg
2. Press 'Tab'.
3. It does not auto complete.
Case 2.
1. (qemu) block_resize flo
2. Press 'Tab'.
3. It does not auto complete 'floppy0'.
Since the readline_add_completion_of() may add any completion when
strlen(pfx) is zero, we remove the check with (name[0] == '\0') because
strlen() always returns zero in that case.
Fixes: 52f50b1e9f ("readline: Extract readline_add_completion_of() from monitor")
Cc: Joe Jin <joe.jin@oracle.com>
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[ letter edited -- need reviews for these hunks
bsd-user: Helper routines h2g_old_sysctl
bsd-user: various helper routines for sysctl
]
This group of patches gets the basic framework for sysctl upstreamed. There's a
lot more to translate far too many binary blobs the kernel publishes via
sysctls, but I'm leaving those out in the name of simplicity.
There's also a bug fix from Doug Rabson that fixes a long int confusion leading
to a trunctation of addresses (oops)
There's a fix for the -static option, since clang hates -no-pie and needs only
-fno-pie.
Finally, I'm changing how I'm upstreaming a little. I'm doing a little deeper
dives into our rather chaotic repo to find a couple of authors I might have
missed. From here on out, I'll be using the original author's name as the git
author. I'll also tag the co-authors better as well when there's multiple people
that did something (other than reformat and/or move code around). I've
discovered more code moved about than I'd previously known. This seems more in
line with standard practice.
v3->pull:
o minor tweaks in the conditional reviews around formatting
o fix all errors for check patch and am OK with remaining warnings for
line length that's only slightly too long
o edited letter for changes in review process
v3:
o Removed -strict, it's not ready and needs a complete rethink.
o Add g_assert_not_reached()
o target -> guest in most places
o Use MIN() to simplify things
o Better types in many places (abi_int instead of int32_t)
o Use ARRAY_COUNT
o fix tabs copied from FreeBSD sources to spaces
v2:
o Created various helper functions to make the code a little better
o split a few patches that I thought would be approved together but
that generated commentary. It's easier to manage 1 per patch for
those.
o Add/delete G_GNU_UNUSED to ensure all patches compile w/o warnings
o Fix 64-bit running 32-bit binary to get a LONG or ULONG. Add a
bounce buffer for these so we don't overflow anything on the target
and return all the elements of arrays.
o Fixed a number of nits noticed in the review.
o Add or improve comments to explain things there were questions on
during the review.
o fix noted typos
o fix host != target page size differences
o Add pointers to FreeBSD source code, as appropriate
o fix locking (mostly unlocking) on error paths
o Note: -strict feedback not yet applied due to large numbers of changes
from the rest. Next round.
-----BEGIN PGP SIGNATURE-----
Comment: GPGTools - https://gpgtools.org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=HB1L
-----END PGP SIGNATURE-----
Merge tag 'bsd-user-2023q1-pull-request' of gitlab.com:bsdimp/qemu into staging
2023 Q1 bsd-user upstreaming: bugfixes and sysctl
[ letter edited -- need reviews for these hunks
bsd-user: Helper routines h2g_old_sysctl
bsd-user: various helper routines for sysctl
]
This group of patches gets the basic framework for sysctl upstreamed. There's a
lot more to translate far too many binary blobs the kernel publishes via
sysctls, but I'm leaving those out in the name of simplicity.
There's also a bug fix from Doug Rabson that fixes a long int confusion leading
to a trunctation of addresses (oops)
There's a fix for the -static option, since clang hates -no-pie and needs only
-fno-pie.
Finally, I'm changing how I'm upstreaming a little. I'm doing a little deeper
dives into our rather chaotic repo to find a couple of authors I might have
missed. From here on out, I'll be using the original author's name as the git
author. I'll also tag the co-authors better as well when there's multiple people
that did something (other than reformat and/or move code around). I've
discovered more code moved about than I'd previously known. This seems more in
line with standard practice.
v3->pull:
o minor tweaks in the conditional reviews around formatting
o fix all errors for check patch and am OK with remaining warnings for
line length that's only slightly too long
o edited letter for changes in review process
v3:
o Removed -strict, it's not ready and needs a complete rethink.
o Add g_assert_not_reached()
o target -> guest in most places
o Use MIN() to simplify things
o Better types in many places (abi_int instead of int32_t)
o Use ARRAY_COUNT
o fix tabs copied from FreeBSD sources to spaces
v2:
o Created various helper functions to make the code a little better
o split a few patches that I thought would be approved together but
that generated commentary. It's easier to manage 1 per patch for
those.
o Add/delete G_GNU_UNUSED to ensure all patches compile w/o warnings
o Fix 64-bit running 32-bit binary to get a LONG or ULONG. Add a
bounce buffer for these so we don't overflow anything on the target
and return all the elements of arrays.
o Fixed a number of nits noticed in the review.
o Add or improve comments to explain things there were questions on
during the review.
o fix noted typos
o fix host != target page size differences
o Add pointers to FreeBSD source code, as appropriate
o fix locking (mostly unlocking) on error paths
o Note: -strict feedback not yet applied due to large numbers of changes
from the rest. Next round.
# -----BEGIN PGP SIGNATURE-----
# Comment: GPGTools - https://gpgtools.org
#
# iQIzBAABCgAdFiEEIDX4lLAKo898zeG3bBzRKH2wEQAFAmP/l/4ACgkQbBzRKH2w
# EQACSA/+McBQE2IAw+OaAXwD9yOjN9YAEoitl1eUAYuRNGnODuA0mlsTdEaEOHXi
# 0gzJ6qLqZxN0fzkQ6cdME3Tsft4bnwW/glRtIoOjfEYur/4VMJGCxcCmdF3DNUR9
# aDqr+SukhkMI3fy2CtPDViX8kH8RUlv1I4JM7vBkiu0XB2Joe0cKqGsSOlQvPOPc
# imhNX5Vw3A5RB/GoiJkoMBu42HwIqFUtMU3RkeraclHSeQfqgWiNu1TZyJtmsL9S
# qUPhc4+Ac1EeO9cA67j3t+vlYBR9RcvQHjtSFBpcNjYcJdchgB4Kk4E94/O0jgq4
# +ueV4bkPL0wNWi13mPwclK/VTMdobyLJsRzH5ulk1GF7bGFSbkYlr2Nbct7HLWMo
# DIkN8oCs/j2TqE5ZxTMmLnuA7N7mpdtGt2xM4VBgev9MRzF9nN09LmR/smOzechp
# /Jr9ujU3c6XTlWO0x+lQrKGo0BlNjiGJujoS21UpiWBKISxaelVxId2UTBA1BPGR
# UfNAD+eD1TFbDHFLBN8SsLNXam6BkIcOgQ5sbwde6Y+W4TVKZ1XpB0dxzmnftdt/
# iEIygOj3F2BGVbvPtpP+KzSfjMg7+s4mb1/oDI5D7bekY0RK8C6KRasF/L4QjMWN
# U08L2n+aQ7udcLZHmnzsd3Ifvu7+I/YaAR8gP/G7ZH2z3toMk5E=
# =HB1L
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 01 Mar 2023 18:22:54 GMT
# gpg: using RSA key 2035F894B00AA3CF7CCDE1B76C1CD1287DB01100
# gpg: Good signature from "Warner Losh <wlosh@netflix.com>" [unknown]
# gpg: aka "Warner Losh <imp@bsdimp.com>" [unknown]
# gpg: aka "Warner Losh <imp@freebsd.org>" [unknown]
# gpg: aka "Warner Losh <imp@village.org>" [unknown]
# gpg: aka "Warner Losh <wlosh@bsdimp.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2035 F894 B00A A3CF 7CCD E1B7 6C1C D128 7DB0 1100
* tag 'bsd-user-2023q1-pull-request' of gitlab.com:bsdimp/qemu:
bsd-user: implement sysctlbyname(2)
bsd-user: do_freebsd_sysctl helper for sysctl(2)
bsd-user: Start translation of arch-specific sysctls
bsd-user: common routine do_freebsd_sysctl_oid for all sysctl variants
bsd-user: sysctl helper funtions: sysctl_name2oid and sysctl_oidfmt
bsd-user: Helper routines oidfmt
bsd-user: various helper routines for sysctl
bsd-user: Add sysarch syscall
build: Don't specify -no-pie for --static user-mode programs
bsd-user: Don't truncate the return value from freebsd_syscall
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In pcie_cap_slot_write_config() we check for PCI_EXP_SLTCTL_PWR_OFF in
a bad form. We should distinguish PCI_EXP_SLTCTL_PWR which is a "mask"
and PCI_EXP_SLTCTL_PWR_OFF which is value for that mask.
Better code is in pcie_cap_slot_unplug_request_cb() and in
pcie_cap_update_power(). Let's use same pattern everywhere. To simplify
things add also a helper.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Kuchin <antonkuchin@yandex-team.ru>
Message-Id: <20230216180356.156832-12-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
*_by_mask() helpers shouldn't be used here (and that's the only one).
*_by_mask() helpers do shift their value argument, but in pcie.c code
we use values that are already shifted appropriately.
Happily, PCI_EXP_SLTCTL_PWR_ON is zero, so shift doesn't matter. But if
we apply same helper for PCI_EXP_SLTCTL_PWR_OFF constant it will do
wrong thing.
So, let's use instead pci_word_test_and_clear_mask() which is already
used in the file to clear PCI_EXP_SLTCTL_PWR_OFF bit in
pcie_cap_slot_init() and pcie_cap_slot_reset().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Anton Kuchin <antonkuchin@yandex-team.ru>
Message-Id: <20230216180356.156832-11-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The structure type is unused. Also, it's the only user of corresponding
macros, so drop them too.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Kuchin <antonkuchin@yandex-team.ru>
Message-Id: <20230216180356.156832-10-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We already have indicator values in
include/standard-headers/linux/pci_regs.h , no reason to reinvent them
in include/hw/pci/pcie_regs.h. (and we already have usage of
PCI_EXP_SLTCTL_PWR_IND_BLINK and PCI_EXP_SLTCTL_PWR_IND_OFF in
hw/pci/pcie.c, so let's be consistent)
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Kuchin <antonkuchin@yandex-team.ru>
Message-Id: <20230216180356.156832-9-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PCI_EXP_SLTCTL_PIC_OFF is a value, and PCI_EXP_SLTCTL_PIC is a mask.
Happily PCI_EXP_SLTCTL_PIC_OFF is a maximum value for this mask and is
equal to the mask itself. Still the code looks like a bug. Let's make
it more reader-friendly.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Kuchin <antonkuchin@yandex-team.ru>
Message-Id: <20230216180356.156832-8-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Rename it to shpc_device_get_slot(), to mention what it does rather
than how it is used. It also helps to reuse it in further commit.
Also, add a return value and get rid of local_err.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Anton Kuchin <antonkuchin@yandex-team.ru>
Message-Id: <20230216180356.156832-7-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We'll need it in further patch to report bridge in QAPI event.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Anton Kuchin <antonkuchin@yandex-team.ru>
Message-Id: <20230216180356.156832-6-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Free slot if both conditions (power-led = OFF and state = DISABLED)
becomes true regardless of the sequence. It is similar to how PCIe
hotplug works.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Anton Kuchin <antonkuchin@yandex-team.ru>
Message-Id: <20230216180356.156832-5-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
ENABLED -> PWRONLY transition is not allowed and we handle it by
shpc_invalid_command(). But PWRONLY -> ENABLED transition is silently
ignored, which seems wrong. Let's handle it as correct.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Anton Kuchin <antonkuchin@yandex-team.ru>
Message-Id: <20230216180356.156832-4-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The result of the function is always one byte. The result is always
assigned to uint8_t variable. Also, shpc_get_status() should be
symmetric to shpc_set_status() which has uint8_t value argument.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Anton Kuchin <antonkuchin@yandex-team.ru>
Message-Id: <20230216180356.156832-3-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
0 is not a valid state for the led. Let's start with OFF.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Anton Kuchin <antonkuchin@yandex-team.ru>
Message-Id: <20230216180356.156832-2-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Not stopping them leave the device in a bad state when virtio-net
fronted device is unplugged with device_del monitor command.
This is not triggable in regular poweroff or qemu forces shutdown
because cleanup is called right after vhost_vdpa_dev_start(false). But
devices hot unplug does not call vdpa device cleanups. This lead to all
the vhost_vdpa devices without stop the SVQ but the last.
Fix it and clean the code, making it symmetric with
vhost_vdpa_svqs_start.
Fixes: dff4426fa6 ("vhost: Add Shadow VirtQueue kick forwarding capabilities")
Reported-by: Lei Yang <leiyang@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230209170004.899472-1-eperezma@redhat.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
The Vhost-user specification changed feature and request
naming from _SLAVE_ to _BACKEND_.
This patch adopts the new naming convention.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Message-Id: <20230208203259.381326-4-maxime.coquelin@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The Vhost-user specification changed feature and request
naming from _SLAVE_ to _BACKEND_.
This patch adopts the new naming convention.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Message-Id: <20230208203259.381326-3-maxime.coquelin@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Backend's message and protocol features names were still
using "_SLAVE_" naming. For consistency with the new naming
convention, replace it with _BACKEND_.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Message-Id: <20230208203259.381326-2-maxime.coquelin@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The expiration time provided for timer_mod() can overflow if a
ridiculously large value is set to the comparator register. The
resulting value can represent a past time after rounded, forcing the
timer to fire immediately. If the timer is configured as periodic, it
will rearm the timer again, and form an endless loop.
Check if the expiration value will overflow, and if it will, stop the
timer instead of rearming the timer with the overflowed time.
This bug was found by Alexander Bulekov when fuzzing igb, a new
network device emulation:
https://patchew.org/QEMU/20230129053316.1071513-1-alxndr@bu.edu/
The fixed test case is:
fuzz/crash_2d7036941dcda1ad4380bb8a9174ed0c949bcefd
Fixes: 16b29ae180 ("Add HPET emulation to qemu (Beth Kon)")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20230131030037.18856-1-akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In bad9c5a516 ("virtio-rng-pci: fix migration compat for vectors") I
fixed the virtio-rng-pci migration compatibility, but it was discovered
that we also need to fix the other aliases of the device for the
transitional cases.
Fixes: 9ea02e8f1 ('virtio-rng-pci: Allow setting nvectors, so we can use MSI-X')
bz: https://bugzilla.redhat.com/show_bug.cgi?id=2162569
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20230207174944.138255-1-dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost_dev_cleanup() clears vhost_dev so back up its vqs member to free
the memory pointed by the member.
Fixes: 821d28b88f ("vhost-user-rng: Add vhost-user-rng implementation")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20230130140516.78078-1-akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost_dev_cleanup() clears vhost_dev so back up its vqs member to free
the memory pointed by the member.
Fixes: 7221d3b634 ("hw/virtio: add boilerplate for vhost-user-i2c device")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20230130140435.78049-1-akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost_dev_cleanup(), called from vu_gpio_disconnect(), clears vhost_dev
so vhost-user-gpio must set the members of vhost_dev each time
connecting.
do_vhost_user_cleanup() should also acquire the pointer to vqs directly
from VHostUserGPIO instead of referring to vhost_dev as it can be called
after vhost_dev_cleanup().
Fixes: 27ba7b027f ("hw/virtio: add boilerplate for vhost-user-gpio device")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20230130140320.77999-1-akihiko.odaki@daynix.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
While ioeventfds are needed for good performance with KVM guests it
should not be a gating requirement. We can run vhost-user backends using
simulated ioeventfds or inband signalling.
With this change I can run:
$QEMU $OPTS \
-display gtk,gl=on \
-device vhost-user-gpu-pci,chardev=vhgpu \
-chardev socket,id=vhgpu,path=vhgpu.sock
with:
./contrib/vhost-user-gpu/vhost-user-gpu \
-s vhgpu.sock \
-v
and at least see things start-up - although the display gets rotated by
180 degrees. Once lightdm takes over we never make it to the login
prompt and just get a blank screen.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20221202132231.1048669-1-alex.bennee@linaro.org>
Message-Id: <20230130124728.175610-1-alex.bennee@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since GUEST_ANNOUNCE is emulated the feature bit could be set without
backend support. This happens in the vDPA case.
However, backend vDPA parent may not have CVQ support. This causes an
incoherent feature set, and the driver may refuse to start. This
happens in virtio-net Linux driver.
This may be solved differently in the future. Qemu is able to emulate a
CVQ just for guest_announce purposes, helping guest to notify the new
location with vDPA devices that does not support it. However, this is
left as a TODO as it is way more complex to backport.
Tested with vdpa_net_sim, toggling manually VIRTIO_NET_F_CTRL_VQ in the
driver and migrating it with x-svq=on.
Fixes: 980003debd ("vdpa: do not handle VIRTIO_NET_F_GUEST_ANNOUNCE in vhost-vdpa")
Reported-by: Dawar, Gautam <gautam.dawar@amd.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230124161159.2182117-1-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Gautam Dawar <gautam.dawar@amd.com>
Tested-by: Gautam Dawar <gautam.dawar@amd.com>
Tested-by: Lei Yang <leiyang@redhat.com>
This reverts commit 67f7e426e5.
Additionally to the automatic revert, I went over the code
and dropped all mentions of legacy_no_rng_seed manually,
effectively reverting a combination of 2 additional commits:
commit ffe2d2382e
Author: Jason A. Donenfeld <Jason@zx2c4.com>
Date: Wed Sep 21 11:31:34 2022 +0200
x86: re-enable rng seeding via SetupData
commit 3824e25db1
Author: Gerd Hoffmann <kraxel@redhat.com>
Date: Wed Aug 17 10:39:40 2022 +0200
x86: disable rng seeding via setup_data
Fixes: 67f7e426e5 ("hw/i386: pass RNG seed via setup_data entry")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Dov Murik <dovmurik@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit e935b73508.
Fixes: e935b73508 ("x86: return modified setup_data only if read as memory, not as file")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Dov Murik <dovmurik@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit eebb38a563.
Fixes: eebb38a563 ("x86: use typedef for SetupData struct")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Dov Murik <dovmurik@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit 763a2828bf.
Fixes: 763a2828bf ("x86: reinitialize RNG seed on system reboot")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Dov Murik <dovmurik@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit cc63374a5a.
Fixes: cc63374a5a ("x86: re-initialize RNG seed when selecting kernel")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Dov Murik <dovmurik@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit 14b29fea74.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes: 14b29fea74 ("x86: do not re-randomize RNG seed on snapshot load")
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Dov Murik <dovmurik@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit eac7a7791b.
Fixes: eac7a7791b ("x86: don't let decompressed kernel image clobber setup_data")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Dov Murik <dovmurik@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Since table type 4 of SMBIOS version 2.6 is shorter than 3.0, the
strings which follow immediately after the struct fields have been
overwritten by unconditional filling of later fields such as core_count2.
Make these fields dependent on the SMBIOS version.
Fixes: 05e27d74c7 ("hw/smbios: add core_count2 to smbios table type 4")
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2169904
Signed-off-by: Julia Suvorova <jusual@redhat.com>
Message-Id: <20230223125747.254914-1-jusual@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since commit a0e61807a3 ("qapi: Remove QMP events and commands from
user-mode builds") we don't generate the "qapi-commands-machine.h"
header in a user-emulation-only build.
Move the QMP functions from cpu_init.c (which is always compiled)
to monitor.c (which is only compiled when system-emulation
is selected). Rename monitor.c to arm-qmp-cmds.c.
Note ppc_cpu_class_by_name() is used by both file units, so we
expose its prototype in "cpu-qom.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20230223155540.30370-5-philmd@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Since commit a0e61807a3 ("qapi: Remove QMP events and commands from
user-mode builds") we don't generate the "qapi-commands-machine.h"
header in a user-emulation-only build.
Extract the QMP functions from cpu.c (which is always compiled)
to the new 'loongarch-qmp-cmds.c' unit (which is only compiled
when system emulation is selected).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230223155540.30370-4-philmd@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Since commit a0e61807a3 ("qapi: Remove QMP events and commands from
user-mode builds") we don't generate the "qapi-commands-machine.h"
header in a user-emulation-only build.
Guard qmp_query_cpu_definitions() within CONFIG_USER_ONLY; move
x86_cpu_class_check_missing_features() closer since it is only used
by this QMP command handler.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230223155540.30370-3-philmd@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Since commit a0e61807a3 ("qapi: Remove QMP events and commands from
user-mode builds") we don't generate the "qapi-commands-machine.h"
header in a user-emulation-only build.
Move the QMP functions from helper.c (which is always compiled)
to monitor.c (which is only compiled when system-emulation
is selected). Rename monitor.c to arm-qmp-cmds.c.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230223155540.30370-2-philmd@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Straightforward conflict with commit 9def656e7a resolved]
Daniel Henrique Barboza <dbarboza@ventanamicro.com> says:
This is a re-send of patch 1, which is already reviewed, with a
follow-up that uses riscv_cpu_cfg() in the remaining of the file. This
was suggested by Weiwei Li in the "[PATCH 0/4] RISCVCPUConfig related
cleanups" review. Patch 1 makes the work of patch 2 easier since it
eliminated some uses of env_archcpu() we want to avoid.
* b4-shazam-merge:
target/riscv/vector_helper.c: avoid env_archcpu() when reading RISCVCPUConfig
target/riscv/vector_helper.c: create vext_set_tail_elems_1s()
Message-ID: <20230226170514.588071-1-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This file has several uses of env_archcpu() that are used solely to read
cfg->vlen. Use the new riscv_cpu_cfg() inline instead.
Suggested-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Weiwei Li<liweiwei@iscas.ac.cn>
Message-ID: <20230226170514.588071-3-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Commit 752614cab8 ("target/riscv: rvv: Add tail agnostic for vector
load / store instructions") added code to set the tail elements to 1 in
the end of vext_ldst_stride(), vext_ldst_us(), vext_ldst_index() and
vext_ldff(). Aside from a env->vl versus an evl value being used in the
first loop, the code is being repeated 4 times.
Create a helper to avoid code repetition in all those functions.
Arguments that are used in the callers (nf, esz and max_elems) are
passed as arguments. All other values are being derived inside the
helper.
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20230226170514.588071-2-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
