Header guard symbols should match their file name to make guard
collisions less likely.
Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190315145123.28030-6-armbru@redhat.com>
[Rebase to master: update include/hw/net/ne2000-isa.h]
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes, with the changes
to the following files manually reverted:
contrib/libvhost-user/libvhost-user-glib.h
contrib/libvhost-user/libvhost-user.c
contrib/libvhost-user/libvhost-user.h
linux-user/mips64/cpu_loop.c
linux-user/mips64/signal.c
linux-user/sparc64/cpu_loop.c
linux-user/sparc64/signal.c
linux-user/x86_64/cpu_loop.c
linux-user/x86_64/signal.c
slirp/src/*
target/s390x/gen-features.c
tests/fp/platform.h
tests/migration/s390x/a-b-bios.c
tests/test-rcu-simpleq.c
tests/test-rcu-tailq.c
tests/uefi-test-tools/UefiTestToolsPkg/BiosTablesTest/BiosTablesTest.c
We're in the process of spinning out slirp/. tests/fp/platform.h is
has to include qemu/osdep.h because tests/fp/berkeley-softfloat-3/ and
tests/fp/berkeley-testfloat-3/ don't. tests/uefi-test-tools/ is guest
software. The remaining reverts are the same as in commit
b7d89466dd.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190313162812.8885-1-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Revert change to tests/fp/platform.h, adjust commit message]
Add the config protocol feature bit if the set_config & get_config
callbacks are implemented.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190503130034.24916-3-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
/home/elmarco/src/qemu/contrib/libvhost-user/libvhost-user.c: In function ‘vu_set_mem_table_exec_postcopy’:
/home/elmarco/src/qemu/contrib/libvhost-user/libvhost-user.c:546:31: warning: taking address of packed member of ‘struct VhostUserMsg’ may result in an unaligned pointer value [-Waddress-of-packed-member]
546 | VhostUserMemory *memory = &vmsg->payload.memory;
| ^~~~~~~~~~~~~~~~~~~~~
/home/elmarco/src/qemu/contrib/libvhost-user/libvhost-user.c: In function ‘vu_set_mem_table_exec’:
/home/elmarco/src/qemu/contrib/libvhost-user/libvhost-user.c:688:31: warning: taking address of packed member of ‘struct VhostUserMsg’ may result in an unaligned pointer value [-Waddress-of-packed-member]
688 | VhostUserMemory *memory = &vmsg->payload.memory;
| ^~~~~~~~~~~~~~~~~~~~~
/home/elmarco/src/qemu/contrib/libvhost-user/libvhost-user.c: In function ‘vu_set_vring_addr_exec’:
/home/elmarco/src/qemu/contrib/libvhost-user/libvhost-user.c:817:36: warning: taking address of packed member of ‘struct VhostUserMsg’ may result in an unaligned pointer value [-Waddress-of-packed-member]
817 | struct vhost_vring_addr *vra = &vmsg->payload.addr;
| ^~~~~~~~~~~~~~~~~~~
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190503130034.24916-2-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
gcc_struct is for x86 only, and it generates an warning on ARM64 Clang/MinGW targets.
Signed-off-by: Cao Jiaxi <driver1998@foxmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20190503003618.10089-1-driver1998@foxmail.com
[PMM: dropped the slirp change as slirp is now a submodule]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The function get_fd extract context from the received MAD message and
uses it as a key to fetch the destination fd from the mapping table.
A context can be dgid in case of CM request message or comm_id in case
of CM SIDR response message.
When MAD message with a smaller size as expected for the message type
received we are hitting out-of-bounds where we are looking for the
context out of message boundaries.
Fix it by validating the message size.
Reported-by Sam Smith <sam.j.smith@oracle.com>
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Message-Id: <20190212112347.1605-1-yuval.shaia@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
This patch adds support for VHOST_USER_GET_INFLIGHT_FD and
VHOST_USER_SET_INFLIGHT_FD message to set/get shared buffer
to/from qemu. Then backend can track inflight I/O in this buffer.
Signed-off-by: Xie Yongji <xieyongji@baidu.com>
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Message-Id: <20190228085355.9614-5-xieyongji@baidu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce vu_queue_map_desc() which should be
independent with vu_queue_pop();
Signed-off-by: Xie Yongji <xieyongji@baidu.com>
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190228085355.9614-4-xieyongji@baidu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The vu_check_queue_msg_file() has checked the FD flag. So let's
delete the redundant check after it.
Signed-off-by: Xie Yongji <xieyongji@baidu.com>
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Message-Id: <20190228085355.9614-3-xieyongji@baidu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost-user-input will make use of this function to undo some queue pop
in case the virtio queue does not have enough room.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190308140454.32437-11-marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Simplify the creation of FD sources for other users. This is just
convenience to avoid duplicating similar code elsewhere.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190308140454.32437-10-marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since commit 2566378d6d, libvhost-user
no longer panics on disconnect (rc == 0), and instead silently ignores
an invalid VHOST_USER_NONE message.
Without extra work from the API user, this will simply busy-loop on
HUP events. The obvious thing to do is to exit(0) instead, while
additional or different work can be done by overriding
iface->process_msg().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>
Message-Id: <20190308140454.32437-5-marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now that the VhostUserMsg.request field is used for both master &
slave requests, since commit d84599f56c:
contrib/libvhost-user/libvhost-user.c:953:20: error: implicit conversion from enumeration type 'enum VhostUserSlaveRequest' to different enumeration type 'VhostUserRequest' (aka 'enum VhostUserRequest') [-Werror,-Wenum-conversion]
.request = VHOST_USER_SLAVE_VRING_HOST_NOTIFIER_MSG,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190308140454.32437-2-marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently this just includes Marcel who is a fairly prolific
contributor.
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Based on Tom's LinkedIn profile his QEMU work was while in IBM's
virtualisation group.
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
I know Richard's is right because I asked him in the pub. I'm guessing
Fredrik's based on the fact I vaguely remember an Atari demo. The
others I attributed to academic institutions last time I posted so
have moved them to individuals as requested.
Cc: Fredrik Noring <noring@nocrew.org>
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Richard Henderson <rth@twiddle.net>
Add all missing MIPS/Imgtec/Wave contributors (from the inception of
QEMU).
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Add Citrix, Huawei, Intel, and Microsoft to domain-map.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
[AJB: sorted, added Fujitsu]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Before this patch, if elf2dmp failed to find NT kernel PE magic in
allowed virtual address range, then it assumes NULL as NT kernel
address and cause segfault.
This patch fix the problem described above by checking NT kernel address
before futher processing.
Signed-off-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
Message-Id: <20190219211936.6466-1-viktor.prutyanov@phystech.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linux commit 1f23816b8 "virtio_blk: add discard and write zeroes support"
added the support in the Guest kernel, while here also enable the features
support with vhost-user-blk driver. Also enable the test example utility
with DISCARD and WRITE ZEROES commands.
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Format strings for printf are changed for successful build for Windows
hosts.
Signed-off-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
Message-Id: <20181220012441.13694-6-viktor.prutyanov@phystech.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove duplicate structures definitions in case of build for Windows hosts.
Signed-off-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
Message-Id: <20181220012441.13694-5-viktor.prutyanov@phystech.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace POSIX mmap with GLib g_mapped_file_new in PDB processing stage
to make elf2dmp cross-platform. There are no direct POSIX in elf2dmp
after this patch.
Signed-off-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
Message-Id: <20181220012441.13694-4-viktor.prutyanov@phystech.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace POSIX mmap with GLib g_mapped_file_new in ELF processing module
to make elf2dmp cross-platform.
Signed-off-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
Message-Id: <20181220012441.13694-3-viktor.prutyanov@phystech.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Before this patch QEMU elf.h was not actually included.
Signed-off-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
Message-Id: <20181220012441.13694-2-viktor.prutyanov@phystech.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
contrib/libvhost-user is now using __u64 which is
a long long. New linux headers will use uint64_t.
These need to be printed differently: llx versus PRIx64.
For now cast to uint64_t for portability so the change
does not break the build.
Casts will go away in the future.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Typo comes from upstream git://git.lwn.net/gitdm.git.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <20190111155555.8270-1-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Fix Commit a5d2f6f877 (contrib/rdmacm-mux: Add implementation
of RDMA User MAD multiplexer).
The above commit introduces a new contrib target, adding a global dependency
to libumad library in case pvrdma configuration option is enabled.
Clang forbids it:
clang-6.0: error: -libumad: 'linker' input unused
[-Werror,-Wunused-command-line-argument]
Fix by limiting the scope to the rdmacm-mux target itself.
Reported-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Tested-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190118124614.24548-4-marcel.apfelbaum@gmail.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Do not initialize structs with {0} since some
CLANG versions do not support it.
Use {} construct instead.
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Tested-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190118124614.24548-3-marcel.apfelbaum@gmail.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
The flag is not recognized by some CLANG versions.
Add proper constraints in code instead.
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Tested-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190118124614.24548-2-marcel.apfelbaum@gmail.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Here are some IBMers who use their personal addresses when submitting
patches.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Most files that have TABs only contain a handful of them. Change
them to spaces so that we don't confuse people.
disas, standard-headers, linux-headers and libdecnumber are imported
from other projects and probably should be exempted from the check.
Outside those, after this patch the following files still contain both
8-space and TAB sequences at the beginning of the line. Many of them
have a majority of TABs, or were initially committed with all tabs.
bsd-user/i386/target_syscall.h
bsd-user/x86_64/target_syscall.h
crypto/aes.c
hw/audio/fmopl.c
hw/audio/fmopl.h
hw/block/tc58128.c
hw/display/cirrus_vga.c
hw/display/xenfb.c
hw/dma/etraxfs_dma.c
hw/intc/sh_intc.c
hw/misc/mst_fpga.c
hw/net/pcnet.c
hw/sh4/sh7750.c
hw/timer/m48t59.c
hw/timer/sh_timer.c
include/crypto/aes.h
include/disas/bfd.h
include/hw/sh4/sh.h
libdecnumber/decNumber.c
linux-headers/asm-generic/unistd.h
linux-headers/linux/kvm.h
linux-user/alpha/target_syscall.h
linux-user/arm/nwfpe/double_cpdo.c
linux-user/arm/nwfpe/fpa11_cpdt.c
linux-user/arm/nwfpe/fpa11_cprt.c
linux-user/arm/nwfpe/fpa11.h
linux-user/flat.h
linux-user/flatload.c
linux-user/i386/target_syscall.h
linux-user/ppc/target_syscall.h
linux-user/sparc/target_syscall.h
linux-user/syscall.c
linux-user/syscall_defs.h
linux-user/x86_64/target_syscall.h
slirp/cksum.c
slirp/if.c
slirp/ip.h
slirp/ip_icmp.c
slirp/ip_icmp.h
slirp/ip_input.c
slirp/ip_output.c
slirp/mbuf.c
slirp/misc.c
slirp/sbuf.c
slirp/socket.c
slirp/socket.h
slirp/tcp_input.c
slirp/tcpip.h
slirp/tcp_output.c
slirp/tcp_subr.c
slirp/tcp_timer.c
slirp/tftp.c
slirp/udp.c
slirp/udp.h
target/cris/cpu.h
target/cris/mmu.c
target/cris/op_helper.c
target/sh4/helper.c
target/sh4/op_helper.c
target/sh4/translate.c
tcg/sparc/tcg-target.inc.c
tests/tcg/cris/check_addo.c
tests/tcg/cris/check_moveq.c
tests/tcg/cris/check_swap.c
tests/tcg/multiarch/test-mmap.c
ui/vnc-enc-hextile-template.h
ui/vnc-enc-zywrle.h
util/envlist.c
util/readline.c
The following have only TABs:
bsd-user/i386/target_signal.h
bsd-user/sparc64/target_signal.h
bsd-user/sparc64/target_syscall.h
bsd-user/sparc/target_signal.h
bsd-user/sparc/target_syscall.h
bsd-user/x86_64/target_signal.h
crypto/desrfb.c
hw/audio/intel-hda-defs.h
hw/core/uboot_image.h
hw/sh4/sh7750_regnames.c
hw/sh4/sh7750_regs.h
include/hw/cris/etraxfs_dma.h
linux-user/alpha/termbits.h
linux-user/arm/nwfpe/fpopcode.h
linux-user/arm/nwfpe/fpsr.h
linux-user/arm/syscall_nr.h
linux-user/arm/target_signal.h
linux-user/cris/target_signal.h
linux-user/i386/target_signal.h
linux-user/linux_loop.h
linux-user/m68k/target_signal.h
linux-user/microblaze/target_signal.h
linux-user/mips64/target_signal.h
linux-user/mips/target_signal.h
linux-user/mips/target_syscall.h
linux-user/mips/termbits.h
linux-user/ppc/target_signal.h
linux-user/sh4/target_signal.h
linux-user/sh4/termbits.h
linux-user/sparc64/target_syscall.h
linux-user/sparc/target_signal.h
linux-user/x86_64/target_signal.h
linux-user/x86_64/termbits.h
pc-bios/optionrom/optionrom.h
slirp/mbuf.h
slirp/misc.h
slirp/sbuf.h
slirp/tcp.h
slirp/tcp_timer.h
slirp/tcp_var.h
target/i386/svm.h
target/sparc/asi.h
target/xtensa/core-dc232b/xtensa-modules.inc.c
target/xtensa/core-dc233c/xtensa-modules.inc.c
target/xtensa/core-de212/core-isa.h
target/xtensa/core-de212/xtensa-modules.inc.c
target/xtensa/core-fsf/xtensa-modules.inc.c
target/xtensa/core-sample_controller/core-isa.h
target/xtensa/core-sample_controller/xtensa-modules.inc.c
target/xtensa/core-test_kc705_be/core-isa.h
target/xtensa/core-test_kc705_be/xtensa-modules.inc.c
tests/tcg/cris/check_abs.c
tests/tcg/cris/check_addc.c
tests/tcg/cris/check_addcm.c
tests/tcg/cris/check_addoq.c
tests/tcg/cris/check_bound.c
tests/tcg/cris/check_ftag.c
tests/tcg/cris/check_int64.c
tests/tcg/cris/check_lz.c
tests/tcg/cris/check_openpf5.c
tests/tcg/cris/check_sigalrm.c
tests/tcg/cris/crisutils.h
tests/tcg/cris/sys.c
tests/tcg/i386/test-i386-ssse3.c
ui/vgafont.h
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20181213223737.11793-3-pbonzini@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Eric Blake <eblake@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Most list head structs need not be given a name. In most cases the
name is given just in case one is going to use QTAILQ_LAST, QTAILQ_PREV
or reverse iteration, but this does not apply to lists of other kinds,
and even for QTAILQ in practice this is only rarely needed. In addition,
we will soon reimplement those macros completely so that they do not
need a name for the head struct. So clean up everything, not giving a
name except in the rare case where it is necessary.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
RDMA MAD kernel module (ibcm) disallow more than one MAD-agent for a
given MAD class.
This does not go hand-by-hand with qemu pvrdma device's requirements
where each VM is MAD agent.
Fix it by adding implementation of RDMA MAD multiplexer service which on
one hand register as a sole MAD agent with the kernel module and on the
other hand gives service to more than one VM.
Design Overview:
Reviewed-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
----------------
A server process is registered to UMAD framework (for this to work the
rdma_cm kernel module needs to be unloaded) and creates a unix socket to
listen to incoming request from clients.
A client process (such as QEMU) connects to this unix socket and
registers with its own GID.
TX:
----
When client needs to send rdma_cm MAD message it construct it the same
way as without this multiplexer, i.e. creates a umad packet but this
time it writes its content to the socket instead of calling umad_send().
The server, upon receiving such a message fetch local_comm_id from it so
a context for this session can be maintain and relay the message to UMAD
layer by calling umad_send().
RX:
----
The server creates a worker thread to process incoming rdma_cm MAD
messages. When an incoming message arrived (umad_recv()) the server,
depending on the message type (attr_id) looks for target client by
either searching in gid->fd table or in local_comm_id->fd table. With
the extracted fd the server relays to incoming message to the client.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes, with the changes
to the following files manually reverted:
contrib/libvhost-user/libvhost-user-glib.h
contrib/libvhost-user/libvhost-user.c
contrib/libvhost-user/libvhost-user.h
linux-user/mips64/cpu_loop.c
linux-user/mips64/signal.c
linux-user/sparc64/cpu_loop.c
linux-user/sparc64/signal.c
linux-user/x86_64/cpu_loop.c
linux-user/x86_64/signal.c
target/s390x/gen-features.c
tests/migration/s390x/a-b-bios.c
tests/test-rcu-simpleq.c
tests/test-rcu-tailq.c
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181204172535.2799-1-armbru@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Acked-by: Yuval Shaia <yuval.shaia@oracle.com>
Acked-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
This is a QEMU specific version of a gitdm config for generating
reports on the contributor base of the project. I've added enough
group maps and domain aliases to ensure the current top ten is as
reflective as it can be. As of this commit running:
git log --numstat --since "Last Year" | gitdm -n -l 10
Reports:
Top changeset contributors by employer
Red Hat 3172 (44.3%)
Linaro 1153 (16.1%)
(None) 549 (7.7%)
IBM 348 (4.9%)
Academics (various) 170 (2.4%)
Virtuozzo 168 (2.3%)
Wave Computing 118 (1.6%)
Xilinx 102 (1.4%)
Igalia 93 (1.3%)
Cadence Design Systems 88 (1.2%)
Top lines changed by employer
Red Hat 144092 (28.1%)
Cadence Design Systems 126554 (24.6%)
Linaro 77480 (15.1%)
Wave Computing 33134 (6.5%)
SiFive 14392 (2.8%)
IBM 12219 (2.4%)
(None) 11948 (2.3%)
Academics (various) 10447 (2.0%)
Virtuozzo 10445 (2.0%)
CodeWeavers 9179 (1.8%)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
elf2dmp is a converter from ELF dump (produced by 'dump-guest-memory') to
Windows MEMORY.DMP format (also know as 'Complete Memory Dump') which can be
opened in WinDbg.
This tool can help if VMCoreInfo device/driver is absent in Windows VM and
'dump-guest-memory -w' is not available but dump can be created in ELF format.
The tool works as follows:
1. Determine the system paging root looking at GS_BASE or KERNEL_GS_BASE
to locate the PRCB structure and finds the kernel CR3 nearby if QEMU CPU
state CR3 is not suitable.
2. Find an address within the kernel image by dereferencing the first
IDT entry and scans virtual memory upwards until the start of the
kernel.
3. Download a PDB matching the kernel from the Microsoft symbol store,
and figure out the layout of certain relevant structures necessary for
the dump.
4. Populate the corresponding structures in the memory image and create
the appropriate dump header.
Signed-off-by: Viktor Prutyanov <viktor.prutyanov@virtuozzo.com>
Message-Id: <1535546488-30208-3-git-send-email-viktor.prutyanov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Read only feature shouldn't be negotiable, because if the
backend device reported Read only feature supported, QEMU
host driver shouldn't change backend's RO attribute. While
here, also enable the vhost-user-blk test utility to test
RO feature.
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch introduces the host notifier support in
libvhost-user. A new API is added to support setting
host notifier for each queue.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch reports the protocol feature that is only advertised by
QEMU if the device implements the config ops.
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The response to a VHOST_USER_POSTCOPY_ADVISE contains a fd but doesn't
actually contain any data. FIx vu_message_write so that it doesn't
do a 0-byte write() call, since this was ending up with rc=0
that was confusing the error handling code.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tell QEMU we understand the protocol features needed for postcopy.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This message is sent just before the end of postcopy to get the
client to stop using userfault since we wont respond to any more
requests. It should close userfaultfd so that any other pages
get mapped to the backing file automatically by the kernel, since
at this point we know we've received everything.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Clear the area and turn off THP.
PROT_NONE the area until after we've userfault advised it
to catch any unexpected changes.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We need a better way, but at the moment we need the address of the
mappings sent back to qemu so it can interpret the messages on the
userfaultfd it reads.
This is done as a 3 stage set:
QEMU -> client
set_mem_table
mmap stuff, get addresses
client -> qemu
here are the addresses
qemu -> client
OK - now you can use them
That ensures that qemu has registered the new addresses in it's
userfault code before the client starts accessing them.
Note: We don't ask for the default 'ack' reply since we've got our own.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When new regions are sent to the client using SET_MEM_TABLE, register
them with the userfaultfd.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Split the set_mem_table routines in both qemu and libvhost-user
because the postcopy versions are going to be quite different
once changes in the later patches are added. However, this patch
doesn't produce any functional change, just the split.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Notify the vhost-user slave on reception of the 'postcopy-listen'
event from the source.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Open a userfaultfd (on a postcopy_advise) and send it back in
the reply to the qemu for it to monitor.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Allow replies with fds (for postcopy)
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Wire up a notifier to send a VHOST_USER_POSTCOPY_ADVISE
message on an incoming advise.
Later patches will fill in the behaviour/contents of the
message.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a vhost feature flag for postcopy support, and
use the postcopy notifier to check it before allowing postcopy.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- new stats in virtio balloon
- virtio eventfd rework for boot speedup
- vhost memory rework for boot speedup
- fixes and cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJagxKDAAoJECgfDbjSjVRp5qAH/3gmgBaIzL3KRHd5i0RZifJv
PvyAVYgZd7h0+/1r9GM7guHKyEPZ08JtbHSm/HuDV4BD/Vf3/8joy8roExIfde2A
6k8fd6ANVQmE3t5zUxNXi9qiG4pO4xDIu4cMAbixzgN9x5ttlcfTw7fTT0e0VJxJ
8SN02/uCPPR/DY4/cpjah+slSyv6rBKT1v1ONy7djyRTYHi6h3Meoh05YfEALkwA
goxTKBZHi0L1IZ3HP/ZpXJDohQ5n2P09DX0fQgb8PgmW6WIWB/Qpi5pD53LZpMCV
n9waTF0U0ahneFd2FHo22QMMrwWvQyrjv+w5uXVr+qmHb/OyH2tUt7PgGF9+QKA=
=78s5
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio,vhost,pci,pc: features, fixes and cleanups
- new stats in virtio balloon
- virtio eventfd rework for boot speedup
- vhost memory rework for boot speedup
- fixes and cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 13 Feb 2018 16:29:55 GMT
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (22 commits)
virtio-balloon: include statistics of disk/file caches
acpi-test: update FADT
lpc: drop pcie host dependency
tests: acpi: fix FADT not being compared to reference table
hw/pci-bridge: fix pcie root port's IO hints capability
libvhost-user: Support across-memory-boundary access
libvhost-user: Fix resource leak
virtio-balloon: unref the memory region before continuing
pci: removed the is_express field since a uniform interface was inserted
virtio-blk: enable multiple vectors when using multiple I/O queues
pci/bus: let it has higher migration priority
pci-bridge/i82801b11: clear bridge registers on platform reset
vhost: Move log_dirty check
vhost: Merge and delete unused callbacks
vhost: Clean out old vhost_set_memory and friends
vhost: Regenerate region list from changed sections list
vhost: Merge sections added to temporary list
vhost: Simplify ring verification checks
vhost: Build temporary section list and deref after commit
virtio: improve virtio devices initialization time
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The sg list/indirect descriptor table may be contigious
in GPA but not in HVA address space. But libvhost-user
wasn't aware of that. This would cause out-of-bounds
access. Even a malicious guest could use it to get
information from the vhost-user backend.
Introduce a plen parameter in vu_gpa_to_va() so we can
handle this case, returning the actual mapped length.
Signed-off-by: Yongji Xie <xieyongji@baidu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Free the mmaped memory when we need to mmap new memory
space on vu_set_mem_table_exec() and vu_set_log_base_exec() to
avoid memory leak.
Also close the corresponding fd after mmap() on
vu_set_log_base_exec() to avoid fd leak.
Signed-off-by: Yongji Xie <xieyongji@baidu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
qemu-common.h includes qemu/option.h, but most places that include the
former don't actually need the latter. Drop the include, and add it
to the places that actually need it.
While there, drop superfluous includes of both headers, and
separate #include from file comment with a blank line.
This cleanup makes the number of objects depending on qemu/option.h
drop from 4545 (out of 4743) to 284 in my "build everything" tree.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-20-armbru@redhat.com>
[Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
System headers should be included with <...>, our own headers with
"...". Offenders tracked down with an ugly, brittle and probably
buggy Perl script. Previous iteration was commit a9c94277f0.
Delete inclusions of "string.h" and "strings.h" instead of fixing them
to <string.h> and <strings.h>, because we always include these via
osdep.h.
Put the cleaned up system header includes first.
While there, separate #include from file comment with exactly one
blank line.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-2-armbru@redhat.com>
This commit introduces a vhost-user-blk backend device, it uses UNIX
domain socket to communicate with QEMU. The vhost-user-blk sample
application should be used with QEMU vhost-user-blk-pci device.
To use it, complie with:
make vhost-user-blk
and start like this:
vhost-user-blk -b /dev/sdb -s /path/vhost.socket
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Enable VHOST_USER_GET_CONFIG/VHOST_USER_SET_CONFIG messages in
libvhost-user library, users can implement their own I/O target
based on the library. This enable the virtio config space delivered
between QEMU host device and the I/O target.
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This lets distros standardize on how QEMU should install systemd
services for qemu-ga and qemu-pr-helper.
The qemu-ga unit file comes from Fedora, but I checked that
Debian is using the same path for the virtio-serisal port.
I would like to include this in 2.11, so that the qemu-pr-helper
socket can be standardized across distros. Note however that
the files are not installed. We can add a configure option
in 2.12 perhaps, but it's too late now; documenting the files
in the release notes should do.
Suggested-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20171124164422.3960-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow the qemu to pass us a slave fd. We don't do anything
with it yet.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20171002191521.15748-5-dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Update the ProtocolFeature and UserRequest lists to
match hw/virtio/vhost-user.c.
Fix the text labelling in libvhost-user.c to match the list.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20171002191521.15748-4-dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add a vu_queue_started method to complement vu_queue_enabled.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20171002191521.15748-2-dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
It is unneeded in the VusDev device structure, and also simplify a bit
the code.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This file implements a bridge from the vu_init API of libvhost-user to
GSource, so that libvhost-user can be used inside a GLib main loop.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
- PLOG is unused
- code is compiled out unless debug is enabled
- logging is too verbose
- you can pipe to ts to have timestamp if needed, or use structured
logging with more recent glib
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Use the one from the source with casting, like any other glib source.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
There is no need to include hw/virtio/virtio-scsi.h, then the conflict
with SCSI_XFER enum goes away.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
It is confusing and could easily conflict with future versions.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
- use Vus prefix consistently
- use CamelCase, since that's glib & libvhost-user style
- avoid _t postfix, usually for system headers
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
There is no code to support more than 1 yet, no need for that today.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Instead of a preliminary check, add an assert to the function that has
the pre-condition.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Always remove the unix path when leaving the program (instead of when
freeing scsi_dev). Note that unix_sock_new() also unlink() exisiting
path before creating the socket.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
The *dev pointer belongs to the vhost_scsi_dev_t parent.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
They abort instead, so get rid of failure conditions.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Use g_new/g_free instead of plain malloc. This simplify a bit memory
handling since glib will abort if it cannot allocate.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This simplify a little bit memory management in the following patches.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
libvhost-user is meant to be free of glib dependency. Make sure it is
by droping qemu/osdep.h (which included glib.h)
This fixes a bad malloc()/g_free() pair.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This is the same workaround as commit 523b018dde, which was lost
with libvhost-user transition in commit e10e798c85.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
End processing of messages when VHOST_USER_NONE
is received.
Without this we run into a vubr_panic() call and get
"PANIC: Unhandled request: 0"
Signed-off-by: Jens Freimann <jfreiman@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit introduces a vhost-user-scsi backend sample application. It
must be linked with libiscsi and libvhost-user.
To use it, compile with:
$ make vhost-user-scsi
And run as follows:
$ ./vhost-user-scsi -u vus.sock -i iscsi://uri_to_target/
$ qemu-system-x86_64 --enable-kvm -m 512 \
-object memory-backend-file,id=mem,size=512m,share=on,mem-path=guestmem \
-numa node,memdev=mem \
-chardev socket,id=vhost-user-scsi,path=vus.sock \
-device vhost-user-scsi-pci,chardev=vhost-user-scsi \
The application is currently limited at one LUN only and it processes
requests synchronously (therefore only achieving QD1). The purpose of
the code is to show how a backend can be implemented and to test the
vhost-user-scsi Qemu implementation.
If a different instance of this vhost-user-scsi application is executed
at a remote host, a VM can be live migrated to such a host.
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Message-Id: <1488479153-21203-5-git-send-email-felipe@nutanix.com>
Calling libvhost-user functions like vu_queue_get_avail_bytes() when the
queue doesn't yet have addresses will result in the crashes like the
following:
Program received signal SIGSEGV, Segmentation fault.
0x000055c414112ce4 in vring_avail_idx (vq=0x55c41582fd68, vq=0x55c41582fd68)
at /home/dgilbert/git/qemu/contrib/libvhost-user/libvhost-user.c:940
940 vq->shadow_avail_idx = vq->vring.avail->idx;
(gdb) p vq
$1 = (VuVirtq *) 0x55c41582fd68
(gdb) p vq->vring
$2 = {num = 0, desc = 0x0, avail = 0x0, used = 0x0, log_guest_addr = 0, flags = 0}
at /home/dgilbert/git/qemu/contrib/libvhost-user/libvhost-user.c:940
No locals.
at /home/dgilbert/git/qemu/contrib/libvhost-user/libvhost-user.c:960
num_heads = <optimized out>
out_bytes=out_bytes@entry=0x7fffd035d7c4, max_in_bytes=max_in_bytes@entry=0,
max_out_bytes=max_out_bytes@entry=0) at /home/dgilbert/git/qemu/contrib/libvhost-user/libvhost-user.c:1034
Add a pre-condition checks on vring.avail before accessing it.
Fix documentation and return type of vu_queue_empty() while at it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
On gcc 3.4 and newer, simply using (void) in front of WUR functions is
not sufficient to ignore the return value. That prevents a build when
handling warnings as errors.
libvhost-user had a usage of (void)vasprintf() which triggered such a
condition. This fixes it by replacing this call with g_strdup_vprintf()
which aborts on OOM.
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Message-Id: <1488479153-21203-2-git-send-email-felipe@nutanix.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add a library to help implementing vhost-user backend (or slave).
Dealing with vhost-user as an application developer isn't so easy: you
have all the trouble with any protocol: validation, unix ancillary data,
shared memory, eventfd, logging, and on top of that you need to deal
with virtio queues, if possible efficiently.
qemu test has a nice vhost-user testing application vhost-user-bridge,
which implements most of vhost-user, and virtio.c which implements
virtqueues manipulation. Based on these two, I tried to make a simple
library, reusable for tests or development of new vhost-user scenarios.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[Felipe: set used_idx copy on SET_VRING_ADDR and update shadow avail idx
on SET_VRING_BASE]
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
qemu/osdep.h checks whether MAP_ANONYMOUS is defined, but this check
is bogus without a previous inclusion of sys/mman.h. Include it in
sysemu/os-posix.h and remove it from everywhere else.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move it to the actual users. There are some inclusions of
qemu/host-utils.h in headers, but they are all necessary.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Chardev fix from Marc-André
* config.status tweak from David
* Header file tweaks from Markus, myself and Veronia (Outreachy candidate)
* get_ticks_per_sec() removal from Rutuja (Outreachy candidate)
* Coverity fix from myself
* PKE implementation from myself, based on rth's XSAVE support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJW9ErPAAoJEL/70l94x66DJfEH/A/QkMpAhrgNdyVsahzsGrzE
wx5gHFIc1nBYxyr62w4apUb5jPB7zaXu0LA7EAWDeAe0pyP8hZzLT9kJyOEDsuJu
zwKN2QeLSNMtPbnbKN0I/YQ2za2xX1V5ruhSeOJoVslUI214hgnAURaGshhQNzuZ
2CluDT9KgL5cQifAnKs5kJrwhIYShYNQB+1eDC/7wk28dd/EH+sPALIoF+rqrSmt
Zu4Mdqd+9Ns+oKOjA6br9ULq/Hzg0aDfY82J+XLVVqfF3PXQe8rTDmuMf/7jTn+M
Un7ZOcei9oZF2/9vfAfKQpDCcgD9HvOUSbgqV/ubmkPPmN/LNJzeKj0fBhrRN+Y=
=K12D
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Log filtering from Alex and Peter
* Chardev fix from Marc-André
* config.status tweak from David
* Header file tweaks from Markus, myself and Veronia (Outreachy candidate)
* get_ticks_per_sec() removal from Rutuja (Outreachy candidate)
* Coverity fix from myself
* PKE implementation from myself, based on rth's XSAVE support
# gpg: Signature made Thu 24 Mar 2016 20:15:11 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream: (28 commits)
target-i386: implement PKE for TCG
config.status: Pass extra parameters
char: translate from QIOChannel error to errno
exec: fix error handling in file_ram_alloc
cputlb: modernise the debug support
qemu-log: support simple pid substitution for logs
target-arm: dfilter support for in_asm
qemu-log: dfilter-ise exec, out_asm, op and opt_op
qemu-log: new option -dfilter to limit output
qemu-log: Improve the "exec" TB execution logging
qemu-log: Avoid function call for disabled qemu_log_mask logging
qemu-log: correct help text for -d cpu
tcg: pass down TranslationBlock to tcg_code_gen
util: move declarations out of qemu-common.h
Replaced get_tick_per_sec() by NANOSECONDS_PER_SECOND
hw: explicitly include qemu-common.h and cpu.h
include/crypto: Include qapi-types.h or qemu/bswap.h instead of qemu-common.h
isa: Move DMA_transfer_handler from qemu-common.h to hw/isa/isa.h
Move ParallelIOArg from qemu-common.h to sysemu/char.h
Move QEMU_ALIGN_*() from qemu-common.h to qemu/osdep.h
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Conflicts:
scripts/clean-includes
Move declarations out of qemu-common.h for functions declared in
utils/ files: e.g. include/qemu/path.h for utils/path.c.
Move inline functions out of qemu-common.h and into new files (e.g.
include/qemu/bcd.h)
Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The code is okay for illustrating how things work and for testing, but
its error handling make it unfit for production use. Print a warning
to protect the innocent.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1458066895-20632-41-git-send-email-armbru@redhat.com>
Option -m NAME is interpreted as directory name if we can statfs() it
and its on hugetlbfs. Else it's interpreted as POSIX shared memory
object name. This is nuts.
Always interpret -m as directory. Create new -M for POSIX shared
memory. Last of -m or -M wins.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1458066895-20632-4-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Burying error messages in ~20 lines of usage help is bad form. Print
a single line pointing to -h instead.
Print -h help to stdout rather than stderr. Fix default of -p. Clean
up the help text a bit.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1458066895-20632-3-git-send-email-armbru@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-15-git-send-email-peter.maydell@linaro.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1450452927-8346-25-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Unlike ad hoc prints, error_report_err() uses the error whole instead
of just its message obtained with error_get_pretty(). This avoids
suppressing its hint (see commit 50b7b00). Example:
$ bld/ivshmem-server -l 42@
Parameter 'shm_size' expects a size
You may use k, M, G or T suffixes for kilobytes, megabytes, gigabytes and terabytes.
The last line is new with this patch.
While there, drop a "cannot parse shm size: " message prefix; it's
redundant, because the error message proper is always of the form
"Parameter 'shm_size' expects ...".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-5-git-send-email-armbru@redhat.com>
The current ivshmem protocol uses 'long' for integers. But the
sizeof(long) depends on the host and the endianess is not defined, which
may cause portability troubles.
Instead, switch to using little-endian int64_t. This breaks the
protocol, except on x64 little-endian host where this change
should be compatible.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
getopt() optarg points to argv memory, no need to dup those values,
fixes small leaks detected by clang-analyzer.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Send a protocol version as the first message from server, clients must
close communication if they don't support this protocol version. Older
QEMUs should be fine with this change in the protocol since they
overrides their own vm_id on reception of an id associated to no
eventfd.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[use fifo_update_and_get()]
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
As pointed out on the ML by Andrew Jones, glibc no longer permits
creating POSIX shm on hugetlbfs directly. When given a hugetlbfs path,
create a shareable file there.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
In practice, the number of VM is limited to MAXUINT16 in ivshmem, so use
the same limit on the server (removes a theorical infinite loop)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
Check the number of vectors received from the server, to avoid
out of bound array access.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
When using ivshmem devices, notifications between guests can be sent as
interrupts using a ivshmem-server (typical use described in documentation).
The client is provided as a debug tool.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
[fix a valgrind warning, option and server_close() segvs, extra server
headers includes, getopt() return type, out-of-tree build, use qemu
event_notifier instead of eventfd, fix x86/osx warnings - Marc-André]
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
