Break out trap_illegal() to handle illegal operation traps.
We now generally stop translation of the current insn if
it's not valid.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Break out trap_userspace() to avoid open coding it everywhere.
For privileged insns, we now always stop translation of the
current insn for cores without exceptions.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Name special registers we support.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Use TCGv for load/store addresses, allowing for future
computation of 64-bit load/store address.
No functional change.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Make compute_ldst_addr always use a temp. This simplifies
the code a bit in preparation for adding support for
64bit addresses.
No functional change.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Bypass MMU translation when mmu-index MMU_NOMMU_IDX is used.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Conditionalize setting of PVR11_USE_MMU on the use_mmu
CPU property, otherwise we may incorrectly advertise an
MMU via PVR when the core in fact has none.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
We already have a CPU property to control if a core has
an MMU or not. Remove USE_MMU PVR checks in favor of
looking at the property.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tighten up TCGv_i32 vs TCGv type usage. Avoid using TCGv when
TCGv_i32 should be used.
This is in preparation for adding 64bit addressing support.
No functional change.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Correct the PVR array size, there are 13 PVR registers.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Correct special register array sizes.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Today, when running QEMU in linux-user or with boards that don't
select a specific CPU version, we treat it as an invalid version
and log a message.
Instead, if no specific version was selected, fallback to our
latest CPU version.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Use bool instead of int to represent flags.
No functional change.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Use bool instead of unsigned int to represent flags.
Also, use extract32 instead of open coding the bit extract.
No functional change.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Use bool instead of unsigned int to represent flags.
No functional change.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Add a test program for testing the CRB with the external swtpm.
The 1st test case extends a PCR and reads back the value and compares
it against an expected return packet.
The 2nd test case repeats the 1st test case and then migrates the
external swtpm's state along with the VM state to a destination
QEMU and swtpm and checks that the PCR has the expected value now.
The test cases require 'swtpm' to be installed on the system and
in the PATH and 'swtpm' must support the --tpm2 option. If this is
not the case, the test will be skipped.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Buffers allocated with bitmap_new() should be freed with g_free().
Both reported by Coverity:
*** CID 1391300: API usage errors (ALLOC_FREE_MISMATCH)
/migration/ram.c: 3517 in ram_dirty_bitmap_reload()
3511 * the last one to sync, we need to notify the main send thread.
3512 */
3513 ram_dirty_bitmap_reload_notify(s);
3514
3515 ret = 0;
3516 out:
>>> CID 1391300: API usage errors (ALLOC_FREE_MISMATCH)
>>> Calling "free" frees "le_bitmap" using "free" but it should have been freed using "g_free".
3517 free(le_bitmap);
3518 return ret;
3519 }
3520
3521 static int ram_resume_prepare(MigrationState *s, void *opaque)
3522 {
*** CID 1391292: API usage errors (ALLOC_FREE_MISMATCH)
/migration/ram.c: 249 in ramblock_recv_bitmap_send()
243 * Mark as an end, in case the middle part is screwed up due to
244 * some "misterious" reason.
245 */
246 qemu_put_be64(file, RAMBLOCK_RECV_BITMAP_ENDING);
247 qemu_fflush(file);
248
>>> CID 1391292: API usage errors (ALLOC_FREE_MISMATCH)
>>> Calling "free" frees "le_bitmap" using "free" but it should have been freed using "g_free".
249 free(le_bitmap);
250
251 if (qemu_file_get_error(file)) {
252 return qemu_file_get_error(file);
253 }
254
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20180525015042.31778-1-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Commit:
commit 36c2f8be2c
Author: Juan Quintela <quintela@redhat.com>
Date: Wed Mar 7 08:40:52 2018 +0100
migration: Delay start of migration main routines
Missed tcp and fd transports. This fix its.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Tested-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20180523091411.1073-1-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
gdb_handlesig()'s behaviour is not entirely obvious at first
glance. Add a doc comment for it, and also add a comment
explaining why it's ok for gdb_do_syscallv() to ignore
gdb_handlesig()'s return value. (Coverity complains about
this: CID 1390850.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180515181958.25837-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Values defined for sparc are not correct.
Copy the content of "arch/sparc/include/uapi/asm/socket.h"
to fix them.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180519092956.15134-8-laurent@vivier.eu>
to be like in the kernel and rename it TARGET_ARCH_HAS_SOCKET_TYPES
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180519092956.15134-7-laurent@vivier.eu>
Change conditional #ifdef part by #undef of the symbols
redefined for PPC relative to generic/socket.h
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180519092956.15134-6-laurent@vivier.eu>
and include the file from architectures without specific definitions
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180519092956.15134-5-laurent@vivier.eu>
Coverity points out that there's a missing break in the switch in
host_to_target_cmsg() where we update tgt_len for
cmsg_level/cmsg_type combinations which require a different length
for host and target (CID 1385425). To avoid duplicating the default
case (target length same as host) in both switches, set that before
the switch so that only the cases which want to override it need any
code.
This fixes a bug where we would have used the wrong length
for SOL_SOCKET/SO_TIMESTAMP messages where the target and
host have differently sized 'struct timeval' (ie one is 32
bit and the other is 64 bit).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180518184715.29833-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
cpu_init() was replaced by cpu_create() since 2.12 but comments
weren't updated. So update stale comments to point that page
sizes arei actually initialized by tcg_exec_init(). Also move
another qemu_host_page_size related comment before tcg_exec_init()
where it belongs.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1526557877-293151-1-git-send-email-imammedo@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In thunk_type_align() and thunk_type_size() we currently return
-1 if the value at the type_ptr isn't one of the TYPE_* values
we understand. However, this should never happen, and if it does
then the calling code will go confusingly wrong because none
of the callsites try to handle an error return. Switch to an
assertion instead, so that if this does somehow happen we'll have
a nice clear backtrace of what happened rather than a weird crash
or misbehaviour.
This also silences various Coverity complaints about not handling
the negative return value (CID 1005735, 1005736, 1005738, 1390582).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180514174616.19601-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Extend the docs related to TPM with specs related to VM save and
restore and a troubleshooting guide for TPM migration.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Extend the TPM TIS interface with state migration support.
We need to synchronize with the backend thread to make sure that a command
being processed by the external TPM emulator has completed and its
response been received.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Extend the TPM emulator backend device with state migration support.
The external TPM emulator 'swtpm' provides a protocol over
its control channel to retrieve its state blobs. We implement
functions for getting and setting the different state blobs.
In case the setting of the state blobs fails, we return a
negative errno code to fail the start of the VM.
Since we have an external TPM emulator, we need to make sure
that we do not migrate the state for as long as it is busy
processing a request. We need to wait for notification that
the request has completed processing.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Beginning of merging vDPA, new PCI ID, a new virtio balloon stat, intel
iommu rework fixing a couple of security problems (no CVEs yet), fixes
all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJbBX2cAAoJECgfDbjSjVRpOEYIAIR6KGkwbAJ9SnO9B71DQHl1
yYYgM7i2HwyZ1YPnXOYWnI1lzQ1bARTf2krQJFGmfjlDaueFf9KnXdNByoVCmG8m
UhF/rQp3DcJ4wTABktPtME8gWdQxKPmDxlN5W3f29Zrm3g9S+Hshi+sfPZUkBxL4
gQMFRctb2SxvQXG+lusHVwo1oF6pzGZMmX35906he3m4xS/cfoeCP7Qj6nSvHZq7
lsLoOeYxHtXWA9gTYxpd7zW+hhUxkspoOqcXySHfO7e5enJANaulTxKuC0T+6HL4
O2iUM+1wjUYE0tQcNJ6x7emA82k5OdG2OMD6gbR1oSdquttJo7+4R+goqpb44rc=
=NUoY
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, pci, virtio, vhost: fixes, features
Beginning of merging vDPA, new PCI ID, a new virtio balloon stat, intel
iommu rework fixing a couple of security problems (no CVEs yet), fixes
all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed 23 May 2018 15:41:32 BST
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (28 commits)
intel-iommu: rework the page walk logic
util: implement simple iova tree
intel-iommu: trace domain id during page walk
intel-iommu: pass in address space when page walk
intel-iommu: introduce vtd_page_walk_info
intel-iommu: only do page walk for MAP notifiers
intel-iommu: add iommu lock
intel-iommu: remove IntelIOMMUNotifierNode
intel-iommu: send PSI always even if across PDEs
nvdimm: fix typo in label-size definition
contrib/vhost-user-blk: enable protocol feature for vhost-user-blk
hw/virtio: Fix brace Werror with clang 6.0.0
libvhost-user: Send messages with no data
vhost-user+postcopy: Use qemu_set_nonblock
virtio: support setting memory region based host notifier
vhost-user: support receiving file descriptors in slave_read
vhost-user: add Net prefix to internal state structure
linux-headers: add kvm header for mips
linux-headers: add unistd.h on all arches
update-linux-headers.sh: unistd.h, kvm consistency
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=e+YI
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/sstabellini-http/tags/xen-20180522-tag' into staging
Xen 2018/05/22
# gpg: Signature made Tue 22 May 2018 19:44:06 BST
# gpg: using RSA key 894F8F4870E1AE90
# gpg: Good signature from "Stefano Stabellini <stefano.stabellini@eu.citrix.com>"
# gpg: aka "Stefano Stabellini <sstabellini@kernel.org>"
# Primary key fingerprint: D04E 33AB A51F 67BA 07D3 0AEA 894F 8F48 70E1 AE90
* remotes/sstabellini-http/tags/xen-20180522-tag:
xen_disk: be consistent with use of xendev and blkdev->xendev
xen_disk: use a single entry iovec
xen_backend: make the xen_feature_grant_copy flag private
xen_disk: remove use of grant map/unmap
xen_backend: add an emulation of grant copy
xen: remove other open-coded use of libxengnttab
xen_disk: remove open-coded use of libxengnttab
xen_backend: add grant table helpers
xen: add a meaningful declaration of grant_copy_segment into xen_common.h
checkpatch: generalize xen handle matching in the list of types
xen-hvm: create separate function for ioreq server initialization
xen_pt: Present the size of 64 bit BARs correctly
configure: Add explanation for --enable-xen-pci-passthrough
xen/pt: use address_space_memory object for memory region hooks
xen-pvdevice: Introduce a simplistic xen-pvdevice save state
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----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=M2dr
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mwalle/tags/lm32-queue/20180521' into staging
target/lm32: BQL patch
# gpg: Signature made Tue 22 May 2018 19:25:30 BST
# gpg: using RSA key B458ABB0D8D378E3
# gpg: Good signature from "Michael Walle <michael@walle.cc>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2190 3E48 4537 A7C2 90CE 3EB2 B458 ABB0 D8D3 78E3
* remotes/mwalle/tags/lm32-queue/20180521:
lm32: take BQL before writing IP/IM register
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
After writing up the virtual mdev device emulating a display supporting
the bochs vbe dispi interface (mbochs.ko) and seeing how simple it
actually is I've figured that would be useful for qemu too.
So, here it is, -device bochs-display. It is basically -device VGA
without legacy vga emulation. PCI bar 0 is the framebuffer, PCI bar 2
is mmio with the registers. The vga registers are simply not there
though, neither in the legacy ioport location nor in the mmio bar.
Consequently it is PCI class DISPLAY_OTHER not DISPLAY_VGA.
So there is no text mode emulation, no weird video modes (planar,
256color palette), no memory window at 0xa0000. Just a linear
framebuffer in the pci memory bar. And the amount of code to emulate
this (and therefore the attack surface) is an order of magnitude smaller
when compared to vga emulation.
Compatibility wise it works with OVMF (latest git master).
The bochs-drm.ko linux kernel module can handle it just fine too.
So UEFI guests should not see any functional difference to VGA.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180522165058.15404-4-kraxel@redhat.com
Create a new header file, move the bochs vbe dispi interface
defines to it, so they can be used outside vga code.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180522165058.15404-2-kraxel@redhat.com
depth == 0 is used to indicate 256 color modes. Our region calculation
goes wrong in that case. So detect that and just take the safe code
path we already have for the wraparound case.
While being at it also catch depth == 15 (where our region size
calculation goes wrong too). And make the comment more verbose,
explaining what is going on here.
Without this windows guest install might trigger an assert due to trying
to check dirty bitmap outside the snapshot region.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1575541
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180514103117.21059-1-kraxel@redhat.com
This patch fixes a potential small window that the DMA page table might
be incomplete or invalid when the guest sends domain/context
invalidations to a device. This can cause random DMA errors for
assigned devices.
This is a major change to the VT-d shadow page walking logic. It
includes but is not limited to:
- For each VTDAddressSpace, now we maintain what IOVA ranges we have
mapped and what we have not. With that information, now we only send
MAP or UNMAP when necessary. Say, we don't send MAP notifies if we
know we have already mapped the range, meanwhile we don't send UNMAP
notifies if we know we never mapped the range at all.
- Introduce vtd_sync_shadow_page_table[_range] APIs so that we can call
in any places to resync the shadow page table for a device.
- When we receive domain/context invalidation, we should not really run
the replay logic, instead we use the new sync shadow page table API to
resync the whole shadow page table without unmapping the whole
region. After this change, we'll only do the page walk once for each
domain invalidations (before this, it can be multiple, depending on
number of notifiers per address space).
While at it, the page walking logic is also refactored to be simpler.
CC: QEMU Stable <qemu-stable@nongnu.org>
Reported-by: Jintack Lim <jintack@cs.columbia.edu>
Tested-by: Jintack Lim <jintack@cs.columbia.edu>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
