When setting up NUMA with HMAT enabled there's a check performed
in machine_set_cpu_numa_node() that reports an error when a NUMA
node has a CPU but the node's initiator is not itself. The error
message reported contains only the expected value and not the
actual value (which is different because an error is being
reported). Report both values in the error message.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Message-Id: <ebdf871551ea995bafa7a858899a26aa9bc153d3.1625662776.git.mprivozn@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
A AMD server typically has cpuid level 0x10(test on Rome/Milan), it
should not be changed to 0x1f in multi-dies case.
* to maintain compatibility with older machine types, only implement
this change when the CPU's "x-vendor-cpuid-only" property is false
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: zhenwei pi <pizhenwei@bytedance.com>
Fixes: a94e142899 (target/i386: Add CPUID.1F generation support for multi-dies PCMachine)
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-Id: <20210708170641.49410-1-michael.roth@amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Currently all built-in CPUs report cache information via CPUID leaves 2
and 4, but these have never been defined for AMD. In the case of
SEV-SNP this can cause issues with CPUID enforcement. Address this by
allowing CPU types to suppress these via a new "x-vendor-cpuid-only"
CPU property, which is true by default, but switched off for older
machine types to maintain compatibility.
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: zhenwei pi <pizhenwei@bytedance.com>
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-Id: <20210708003623.18665-1-michael.roth@amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
When Hyper-V SynIC is enabled, we may need to allow Windows guests to make
hypercalls (POST_MESSAGES/SIGNAL_EVENTS). No issue is currently observed
because KVM is very permissive, allowing these hypercalls regarding of
guest visible CPUid bits.
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210608120817.1325125-9-vkuznets@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
According to TLFS, Hyper-V guest is supposed to check
HV_HYPERCALL_AVAILABLE privilege bit before accessing
HV_X64_MSR_GUEST_OS_ID/HV_X64_MSR_HYPERCALL MSRs but at least some
Windows versions ignore that. As KVM is very permissive and allows
accessing these MSRs unconditionally, no issue is observed. We may,
however, want to tighten the checks eventually. Conforming to the
spec is probably also a good idea.
Enable HV_HYPERCALL_AVAILABLE bit unconditionally.
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210608120817.1325125-8-vkuznets@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
hv_cpuid_check_and_set() does too much:
- Checks if the feature is supported by KVM;
- Checks if all dependencies are enabled;
- Sets the feature bit in cpu->hyperv_features for 'passthrough' mode.
To reduce the complexity, move all the logic except for dependencies
check out of it. Also, in 'passthrough' mode we don't really need to
check dependencies because KVM is supposed to provide a consistent
set anyway.
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210608120817.1325125-7-vkuznets@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
To make Hyper-V features appear in e.g. QMP query-cpu-model-expansion we
need to expand and set the corresponding CPUID leaves early. Modify
x86_cpu_get_supported_feature_word() to call newly intoduced Hyper-V
specific kvm_hv_get_supported_cpuid() instead of
kvm_arch_get_supported_cpuid(). We can't use kvm_arch_get_supported_cpuid()
as Hyper-V specific CPUID leaves intersect with KVM's.
Note, early expansion will only happen when KVM supports system wide
KVM_GET_SUPPORTED_HV_CPUID ioctl (KVM_CAP_SYS_HYPERV_CPUID).
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210608120817.1325125-6-vkuznets@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Currently, the only eVMCS version, supported by KVM (and described in TLFS)
is '1'. When Enlightened VMCS feature is enabled, QEMU takes the supported
eVMCS version range (from KVM_CAP_HYPERV_ENLIGHTENED_VMCS enablement) and
puts it to guest visible CPUIDs. When (and if) eVMCS ver.2 appears a
problem on migration is expected: it doesn't seem to be possible to migrate
from a host supporting eVMCS ver.2 to a host, which only support eVMCS
ver.1.
Hardcode eVMCS ver.1 as the result of 'hv-evmcs' enablement for now. Newer
eVMCS versions will have to have their own enablement options (e.g.
'hv-evmcs=2').
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20210608120817.1325125-4-vkuznets@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Clarify the fact that 'hv-passthrough' only enables features which are
already known to QEMU and that it overrides all other 'hv-*' settings.
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210608120817.1325125-3-vkuznets@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The switch case of writing PCI 1 IO base address had an extra break
statement that made part of the code unreachable. This did not cause a
problem as guests ususally leave this register at its default value.
Fixes: dcdf98a901 ("Add emulation of Marvell MV64361 PPC system
controller")
Reported-by: Coverity (CID 1458135)
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20210712131259.B705B7456E3@zero.eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is all about TPM fixes and improvements.
The change log is:
Alexey Kardashevskiy (2):
tcgbios: Fix warnings
version: update to 20210711
Stefan Berger (9):
tcgbios: Fix details in log entries
tcgbios: Fix a typo in the sha256 algo description
tcgbios: Add implementations for sha1, sha384, and sha512
tpm: Add firmware API call 2HASH-EXT-LOG
tcgbios: Change format of S_CRTM_VERSION string to ucs-2
tcgbios: Use assembly for 32 bit rotr in sha256
tcgbios: Use The proper sha function for each PCR bank
tcgbios: Add test cases and test script to run them
Travis: Add script for running tests on Travis
Thomas Huth (1):
Fix bad header guard in version.h
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Linux needs setprop to fix up the device tree, otherwise it's not
finding devices and cannot boot. Since recent VOF change now we need
to add a callback to allow this which is what this patch does.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20210709132920.6544E7457EF@zero.eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The mapping from file-descriptors to translator functions is not guarded
on realloc which may cause invalid function pointers to be read from a
previously deallocated mapping.
Signed-off-by: Owen Anderson <oanderso@google.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210701221255.107976-1-oanderso@google.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Now than target_to_host_errno() always return an errno, we can
remove the unused and arbitrary ERRNO_TABLE_SIZE definition.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210708170550.1846343-9-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Convert the host_to_target_errno_table[] array to a switch
case to allow compiler optimizations (such noticing the identity
function when host and guest errnos match). Extract the errnos
list as to a new includible unit, using a generic macro. Remove
the code related to target_to_host_errno_table[] initialization.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210708170550.1846343-8-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We want to access the target errno indepently of the rest of the
linux-user code. Move the header containing the generic errno
definitions ('errno_defs.h') to 'generic/target_errno_defs.h',
create a new 'target_errno_defs.h' in each target which itself
includes 'generic/target_errno_defs.h'.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210708170550.1846343-4-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We want to have one generic target_errno.h (API to access target
errno), and will add target errno definitions in target_errno_defs.h.
The sparc target already have its errnos in an header, simply rename
it.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210708170550.1846343-3-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The next version of lttng-libs will not require liburcu at run time anymore.
Therefore, it is expected that distros will not include the urcubp libraries
anymore when installing lttng-ust-devel.
To avoid future problems, just require pkg-config to detect lttng-ust.
The .pc files for lttng-ust correctly include liburcubp.a for static
builds, and have always done since pkg-config files were added in 2011.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20210712155710.520889-1-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add helper function and call it for each trace event group added.
Makes sure that events added at module load time are initialized
properly.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20210601132414.432430-6-kraxel@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Pass an iter to st_write_event_mapping, so the function can interate
different things depending on how we initialize the iter.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20210601132414.432430-5-kraxel@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This allows to interate over an event group.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20210601132414.432430-4-kraxel@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Rename trace_event_iter_init() to trace_event_iter_init_pattern(),
add trace_event_iter_init_all() for interating over all events.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20210601132414.432430-3-kraxel@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Setting SYSTEMTAP_TAPSET to some value other than
/usr/share/systemtap/tapsets results in systemtap not finding the
standard tapset library any more, which in turn breaks tracing because
pid() and other standard systemtap functions are not available any more.
So using SYSTEMTAP_TAPSET to point systemtap to the qemu probes will
only work for the prefix=/usr installs because both qemu and system
tapsets in the same directory then. All other prefixes are broken.
Fix that by using the "-I $tapsetdir" command line switch instead.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20210601132414.432430-2-kraxel@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Although unlikely, qemu might hang in nbd_send_request().
Allow recovery in this case by registering the yank function before
calling it.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Message-Id: <20210704000730.1befb596@gecko.fritz.box>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reword the paragraphs to list the JSON key first, rather than in the
middle of prose.
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210707184125.2551140-1-eblake@redhat.com>
Reviewed-by: Nir Soffer <nsoffer@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
The recently-added NBD context qemu:allocation-depth is able to
distinguish between locally-present data (even when that data is
sparse) [shown as depth 1 over NBD], and data that could not be found
anywhere in the backing chain [shown as depth 0]; and the libnbd
project was recently patched to give the human-readable name "absent"
to an allocation-depth of 0. But qemu-img map --output=json predates
that addition, and has the unfortunate behavior that all portions of
the backing chain that resolve without finding a hit in any backing
layer report the same depth as the final backing layer. This makes it
harder to reconstruct a qcow2 backing chain using just 'qemu-img map'
output, especially when using "backing":null to artificially limit a
backing chain, because it is impossible to distinguish between a
QCOW2_CLUSTER_UNALLOCATED (which defers to a [missing] backing file)
and a QCOW2_CLUSTER_ZERO_PLAIN cluster (which would override any
backing file), since both types of clusters otherwise show as
"data":false,"zero":true" (but note that we can distinguish a
QCOW2_CLUSTER_ZERO_ALLOCATED, which would also have an "offset":
listing).
The task of reconstructing a qcow2 chain was made harder in commit
0da9856851 (nbd: server: Report holes for raw images), because prior
to that point, it was possible to abuse NBD's block status command to
see which portions of a qcow2 file resulted in BDRV_BLOCK_ALLOCATED
(showing up as NBD_STATE_ZERO in isolation) vs. missing from the chain
(showing up as NBD_STATE_ZERO|NBD_STATE_HOLE); but now qemu reports
more accurate sparseness information over NBD.
An obvious solution is to make 'qemu-img map --output=json' add an
additional "present":false designation to any cluster lacking an
allocation anywhere in the chain, without any change to the "depth"
parameter to avoid breaking existing clients. The iotests have
several examples where this distinction demonstrates the additional
accuracy.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210701190655.2131223-3-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[eblake: fix more iotest fallout]
Signed-off-by: Eric Blake <eblake@redhat.com>
Enhance the test to inspect what qemu-nbd is advertising during
handshake, and rename it now that we support useful iotest names.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210701190655.2131223-2-eblake@redhat.com>
OSS-Fuzz found sending illegal addresses when querying the write
protection bits triggers an assertion:
qemu-fuzz-i386: hw/sd/sd.c:824: uint32_t sd_wpbits(SDState *, uint64_t): Assertion `wpnum < sd->wpgrps_size' failed.
==11578== ERROR: libFuzzer: deadly signal
#8 0x7ffff628e091 in __assert_fail
#9 0x5555588f1a3c in sd_wpbits hw/sd/sd.c:824:9
#10 0x5555588dd271 in sd_normal_command hw/sd/sd.c:1383:38
#11 0x5555588d777c in sd_do_command hw/sd/sd.c
#12 0x555558cb25a0 in sdbus_do_command hw/sd/core.c💯16
#13 0x555558e02a9a in sdhci_send_command hw/sd/sdhci.c:337:12
#14 0x555558dffa46 in sdhci_write hw/sd/sdhci.c:1187:9
#15 0x5555598b9d76 in memory_region_write_accessor softmmu/memory.c:489:5
Similarly to commit 8573378e62 ("hw/sd: fix out-of-bounds check
for multi block reads"), check the address range before sending
the status of the write protection bits.
Include the qtest reproducer provided by Alexander Bulekov:
$ make check-qtest-i386
...
Running test qtest-i386/fuzz-sdcard-test
qemu-system-i386: ../hw/sd/sd.c:824: sd_wpbits: Assertion `wpnum < sd->wpgrps_size' failed.
Reported-by: OSS-Fuzz (Issue 29225)
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/450
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20210702155900.148665-4-f4bug@amsat.org>
Multiple commands have to check the address requested is valid.
Extract this code pattern as a new address_in_range() helper, and
log invalid accesses as guest errors.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20210624142209.1193073-3-f4bug@amsat.org>
We report the card is in an inconsistent state, but don't precise
in which state it is. Add this information, as it is useful when
debugging problems.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20210624142209.1193073-2-f4bug@amsat.org>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Commit 3fe9a838ec "dp8393x: Always use 32-bit accesses" set .impl.min_access_size
and .impl.max_access_size to 4 to try and fix the Linux jazzsonic driver which uses
32-bit accesses.
The problem with forcing the register access to 32-bit in this way is that since the
dp8393x uses 16-bit registers, a manual endian swap is required for devices on big
endian machines with 32-bit accesses.
For both access sizes and machine endians the QEMU memory API can do the right thing
automatically: all that is needed is to set .impl.min_access_size to 2 to declare that
the dp8393x implements 16-bit registers.
Normally .impl.max_access_size should also be set to 2, however that doesn't quite
work in this case since the register stride is specified using a (dynamic) it_shift
property which is applied during the MMIO access itself. The effect of this is that
for a 32-bit access the memory API performs 2 x 16-bit accesses, but the use of
it_shift within the MMIO access itself causes the register value to be repeated in both
the top 16-bits and bottom 16-bits. The Linux jazzsonic driver expects the stride to be
zero-extended up to access size and therefore fails to correctly detect the dp8393x
device due to the extra data in the top 16-bits.
The solution here is to remove .impl.max_access_size so that the memory API will
correctly zero-extend the 16-bit registers to the access size up to and including
it_shift. Since it_shift is never greater than 2 than this will always do the right
thing for both 16-bit and 32-bit accesses regardless of the machine endian, allowing
the manual endian swap code to be removed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Fixes: 3fe9a838ec ("dp8393x: Always use 32-bit accesses")
Message-Id: <20210705214929.17222-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Finn Thain <fthain@linux-m68k.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Instead of accessing N registers via a single address_space API
call using a temporary buffer (stored in the device state) and
updating each register, move the address_space call in the
register put/get. The load/store and word size checks are moved
to put/get too. This simplifies a bit, making the code easier
to read.
Co-developed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Co-developed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@linux-m68k.org>
Message-Id: <20210710174954.2577195-8-f4bug@amsat.org>
Per the DP83932C datasheet from July 1995:
4.0 SONIC Registers
4.1 THE CAM UNIT
The Content Addressable Memory (CAM) consists of sixteen
48-bit entries for complete address filtering of network
packets. Each entry corresponds to a 48-bit destination
address that is user programmable and can contain any
combination of Multicast or Physical addresses. Each entry
is partitioned into three 16-bit CAM cells accessible
through CAM Address Ports (CAP 2, CAP 1 and CAP 0) with
CAP0 corresponding to the least significant 16 bits of
the Destination Address and CAP2 corresponding to the
most significant bits.
Store the CAM registers as 16-bit as it simplifies the code.
Having now the CAM registers as arrays of 3 uint16_t, we can avoid
using the VMSTATE_BUFFER_UNSAFE macro by using VMSTATE_UINT16_2DARRAY
which is more appropriate. This breaks the migration stream however.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@linux-m68k.org>
Message-Id: <20210710174954.2577195-5-f4bug@amsat.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@linux-m68k.org>
Message-Id: <20210710174954.2577195-3-f4bug@amsat.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Replace address_space_rw(is_write=1) by address_space_write()
and remove pointless cast.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@linux-m68k.org>
Message-Id: <20210710174954.2577195-2-f4bug@amsat.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Michal Privoznik
zhenwei pi
Michael Roth
Vitaly Kuznetsov
Laurent Vivier
Peter Maydell
BALATON Zoltan
Alexey Kardashevskiy
Owen Anderson
Philippe Mathieu-Daudé
Paolo Bonzini
Gerd Hoffmann
Kostiantyn Kostiuk
Lukas Straub
Eric Blake
Mark Cave-Ayland