commit c0e427d6eb ("hw/acpi/ich9: Enable ACPI PCI hot-plug") removed all
uses of find_i440fx() function. This has been replaced by the more generic call
acpi_get_i386_pci_host() which maybe able to find the root bus both for i440fx
machine type as well as for the q35 machine type. There seems to be no more any
need to maintain a i440fx specific version of the api call. Remove it.
Tested by building from a clean tree successfully.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210825031949.919376-2-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When using qemu configured with --enabled-modules, the
generic stubs are used instead of the module symbols:
qemu-system-x86_64: -device virtio-vga,blob=on: cannot enable blob resources without udmabuf
Restrict the stubs to Linux and only link them when
CONFIG_VIRTIO_GPU is disabled (only the modularized
version is available when it is enabled).
Reported-by: Maxim R. <mrom06@ya.ru>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/553
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210823100454.615816-2-philmd@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We added a stub for the arch_type global in commit 5964ed56d9 so
that we could compile blockdev.c into the tools. However, in commit
9db1d3a2be we removed the only use of arch_type from blockdev.c.
The stub is therefore no longer needed, and we can delete it again,
together with the QEMU_ARCH_NONE value that only the stub was using.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210730105947.28215-9-peter.maydell@linaro.org
CONFIG_LINUX_IO_URING is not included in config-host.mak and therefore is
not usable in "when" clauses. Check the availability of the library,
which matches the condition for the non-stubbed version block/io_uring.c.
At this point, the difference between libraries that have config-host.mak
entries and those that do not is quite confusing. The remaining ~dozen
should be converted in 6.2.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210712151810.508249-1-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
If we want to wake up a coroutine from a worker thread, aio_co_wake()
currently does not work. In that scenario, aio_co_wake() calls
aio_co_enter(), but there is no current AioContext and therefore
qemu_get_current_aio_context() returns the main thread. aio_co_wake()
then attempts to call aio_context_acquire() instead of going through
aio_co_schedule().
The default case of qemu_get_current_aio_context() was added to cover
synchronous I/O started from the vCPU thread, but the main and vCPU
threads are quite different. The main thread is an I/O thread itself,
only running a more complicated event loop; the vCPU thread instead
is essentially a worker thread that occasionally calls
qemu_mutex_lock_iothread(). It is only in those critical sections
that it acts as if it were the home thread of the main AioContext.
Therefore, this patch detaches qemu_get_current_aio_context() from
iothreads, which is a useless complication. The AioContext pointer
is stored directly in the thread-local variable, including for the
main loop. Worker threads (including vCPU threads) optionally behave
as temporary home threads if they have taken the big QEMU lock,
but if that is not the case they will always schedule coroutines
on remote threads via aio_co_schedule().
With this change, the stub qemu_mutex_iothread_locked() must be changed
from true to false. The previous value of true was needed because the
main thread did not have an AioContext in the thread-local variable,
but now it does have one.
Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210609122234.544153-1-pbonzini@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Tested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[eblake: tweak commit message per Vladimir's review]
Signed-off-by: Eric Blake <eblake@redhat.com>
When the management layer queries a binary built using --disable-tpm
for TPM devices, it gets confused by getting empty responses:
{ "execute": "query-tpm" }
{
"return": [
]
}
{ "execute": "query-tpm-types" }
{
"return": [
]
}
{ "execute": "query-tpm-models" }
{
"return": [
]
}
To make it clearer by returning an error:
- Make the TPM QAPI schema conditional
All of tpm.json is now 'if': 'defined(CONFIG_TPM)'.
- Adapt the HMP command
- Remove stubs which became unnecessary
The management layer now gets a 'CommandNotFound' error:
{ "execute": "query-tpm" }
{
"error": {
"class": "CommandNotFound",
"desc": "The command query-tpm has not been found"
}
}
Suggested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
This is needed to ensure that virtio-gpu device works for
non-linux builds.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20210526231429.1045476-5-vivek.kasireddy@intel.com>
[ kraxel: add virtio-gpu-udmabuf.c stubs only when building
system emulation ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Right now the SPICE module is special cased to be loaded when processing
of the -spice command line option. However, the spice option group
can also be brought in via -readconfig, in which case the module is
not loaded.
Add a generic hook to load modules that provide a QemuOpts group,
and use it for the "spice" and "iscsi" groups.
Fixes: #194
Fixes: https://bugs.launchpad.net/qemu/+bug/1910696
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the Kconfig 'USB' value is not selected, it is pointless to
build the USB core components. Add a stub for the HMP commands
and usbdevice_create() which is called by usb_device_add in
softmmu/vl.c.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210424224110.3442424-3-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Yank now only depends on util and can be always linked in. Also remove
the stubs as they are not needed anymore.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <997aa12a28c555d8a3b7a363b3bda5c3cf1821ba.1616521341.git.lukasstraub2@web.de>
libqemuutil has two definitions of qemu_set_fd_handler. This
is not needed since the only users of the function are
qemu-io.c and the emulators, both of which already include
util/main-loop.c.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <d0c5aa88-029e-4328-7a53-482a3010c5f8@redhat.com>
Tested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210318155519.1224118-2-armbru@redhat.com>
Beside a CPU device, user-mode emulation doesn't access
anything else from qdev subsystem.
Tools don't need anything from qdev.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210122204441.2145197-10-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
machine_init_done is not the right flag to check when preconfig
is taken into account; for example "./qemu-system-x86_64 -serial
mon:stdio -preconfig" does not print the QEMU monitor header until after
exit_preconfig. Add back a custom bool for mux character devices. This
partially undoes commit c7278b4355 ("chardev: introduce chr_machine_done
hook", 2018-03-12), but it keeps the cleaner logic using a function
pointer in ChardevClass.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The preconfig state is only used if -incoming is not specified, which
makes the RunState state machine more tricky than it need be. However
there is already an equivalent condition which works even with -incoming,
namely qdev_hotplug. Use it instead of a separate runstate.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Block exports are used by softmmu, qemu-storage-daemon, and qemu-nbd.
They are not used by other programs and are not otherwise needed in
libblock.
Undo the recent move of blockdev-nbd.c from blockdev_ss into block_ss.
Since bdrv_close_all() (libblock) calls blk_exp_close_all()
(libblockdev) a stub function is required..
Make qemu-nbd.c use signal handling utility functions instead of
duplicating the code. This helps because os-posix.c is in libblockdev
and it depends on a qemu_system_killed() symbol that qemu-nbd.c lacks.
Once we use the signal handling utility functions we also end up
providing the necessary symbol.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20200929125516.186715-4-stefanha@redhat.com
[Fixed s/ndb/nbd/ typo in commit description as suggested by Eric Blake
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
this fixes non-TCG builds broken recently by replay reverse debugging.
Stub the needed functions in stub/, splitting roughly between functions
needed only by system emulation, by system emulation and tools,
and by everyone. This includes duplicating some code in replay/, and
puts the logic for non-replay related events in the replay/ module (+
the stubs), so this should be revisited in the future.
Surprisingly, only _one_ qtest was affected by this, ide-test.c, which
resulted in a buzz as the bh events were never delivered, and the bh
never executed.
Many other subsystems _should_ have been affected.
This fixes the immediate issue, however a better way to group replay
functionality to TCG-only code could be developed in the long term.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20201013192123.22632-4-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The new interface starts unused, will start being used by the
next patches.
It provides methods for each accelerator to start a vcpu, kick a vcpu,
synchronize state, get cpu virtual clock and elapsed ticks.
In qemu_wait_io_event, make it clear that APC is used only for HAX
on Windows.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
refactoring of cpus.c continues with cpu timer state extraction.
cpu-timers: responsible for the softmmu cpu timers state,
including cpu clocks and ticks.
icount: counts the TCG instructions executed. As such it is specific to
the TCG accelerator. Therefore, it is built only under CONFIG_TCG.
One complication is due to qtest, which uses an icount field to warp time
as part of qtest (qtest_clock_warp).
In order to solve this problem, provide a separate counter for qtest.
This requires fixing assumptions scattered in the code that
qtest_enabled() implies icount_enabled(), checking each specific case.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[remove redundant initialization with qemu_spice_init]
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[fix lingering calls to icount_get]
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move hardware stubs unrelated from the accelerator to xen-hw-stub.c.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200908155530.249806-5-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The linker of MinGW sometimes runs into the following problem:
libqemuutil.a(util_main-loop.c.obj): In function `qemu_fd_register':
/builds/huth/qemu/build/../util/main-loop.c:331: multiple definition of
`qemu_fd_register'
libqemuutil.a(stubs_fd-register.c.obj):/builds/huth/qemu/stubs/fd-register.c:5:
first defined here
collect2: error: ld returned 1 exit status
/builds/huth/qemu/rules.mak:88: recipe for target 'tests/test-timed-average.exe'
failed
qemu_fd_register() is defined in util/main-loop.c for WIN32, so let's simply
move the stub also there in the #else part of the corresponding #ifndef
to fix this problem.
Message-Id: <20200903054503.425435-1-thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When cross-compiling with MinGW, there are sometimes some weird linker
errors like:
ibqemuutil.a(util_main-loop.c.obj): In function `qemu_notify_event':
/builds/huth/qemu/build/../util/main-loop.c:139: multiple definition of
`qemu_notify_event'
libqemuutil.a(stubs_notify-event.c.obj):/builds/huth/qemu/stubs/notify-event.c:5:
first defined here
collect2: error: ld returned 1 exit status
/builds/huth/qemu/rules.mak:88: recipe for target 'tests/test-timed-average.exe'
failed
It seems like it works better when the qemu_timer_notify_cb() stub (which
calls qemu_notify_event()) is in a separate file - then we can also even
remove the qemu_notify_event() stub now.
This patch is based on ideas from the patch "stubs: Remove qemu_notify_event()"
by Philippe Mathieu-Daudé and the patch "cpu-timers, icount: new modules" from
Claudio Fontana.
Message-Id: <20200902102433.304737-1-thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This shows how to do some "computations" in meson.build using its array
and dictionary data structures, and also a basic usage of the sourceset
module for conditional compilation.
Notice the new "if have_system" part of util/meson.build, which fixes
a bug in the old build system was buggy: util/dbus.c was built even for
non-softmmu builds, but the dependency on -lgio was lost when the linking
was done through libqemuutil.a. Because all of its users required gio
otherwise, the bug was hidden. Meson instead propagates libqemuutil's
dependencies down to its users, and shows the problem.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
