Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
--
Renamed start_time to time_last_bitmap_sync(peterx suggestion)
We need to add a parameter to several functions to make this work.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
We create a struct where to put all the ram state
Start with the following fields:
last_seen_block, last_sent_block, last_offset, last_version and
ram_bulk_stage are globals that are really related together.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
--
Fix typo and warnings
So all places are consistent on the naming of a block name parameter.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It reflects better what it does.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Added doc comments for existing functions comment and rewrite them in
a common style.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
--
Fix Peter Xu comments
Improve postcopy comments as per reviews.
Usually guest devices don't like other writers to the same image, so
they use blk_set_perm() to prevent this from happening. In the migration
phase before the VM is actually running, though, they don't have a
problem with writes to the image. On the other hand, storage migration
needs to be able to write to the image in this phase, so the restrictive
blk_set_perm() call of qdev devices breaks it.
This patch flags all BlockBackends with a qdev device as
blk->disable_perm during incoming migration, which means that the
requested permissions are stored in the BlockBackend, but not actually
applied to its root node yet.
Once migration has finished and the VM should be resumed, the
permissions are applied. If they cannot be applied (e.g. because the NBD
server used for block migration hasn't been shut down), resuming the VM
fails.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Kashyap Chamarthy <kchamart@redhat.com>
Postcopy doesn't support migration of RAM shared with another process
yet (we've got a bunch of things to understand).
Check for the case and don't allow postcopy to be enabled.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This problem affects s390x only if we are running without KVM.
Basically, S390CPU.irqstate is unused if we do not use KVM,
and thus no buffer is allocated.
This causes size=0, first_elem=NULL and n_elems=1 in
vmstate_load_state and vmstate_save_state. And the assert fails.
With this fix we can go back to the old behavior and support
VMS_VBUFFER with size 0 and nullptr.
Signed-off-by: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Increase bmds->cur_dirty after submit io, so reduce the frequency
involve into blk_drain, and improve the performance obviously
when block migration.
The performance test result of this patch:
During the block dirty save phase, this patch improve guest os IOPS
from 4.0K to 9.5K. and improve the migration speed from
505856 rsec/s to 855756 rsec/s.
Signed-off-by: Lidong Chen <jemmy858585@gmail.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The tls-creds parameter has a default value of NULL indicating
that TLS should not be used. Setting it to non-NULL enables
use of TLS. Once tls-creds are set to a non-NULL value via the
monitor, it isn't possible to set them back to NULL again, due
to current implementation limitations. The empty string is not
a valid QObject identifier, so this switches to use "" as the
default, indicating that TLS will not be used
The tls-hostname parameter has a default value of NULL indicating
the the hostname from the migrate connection URI should be used.
Again, once tls-hostname is set non-NULL, to override the default
hostname for x509 cert validation, it isn't possible to reset it
back to NULL via the monitor. The empty string is not a valid
hostname, so this switches to use "" as the default, indicating
that the migrate URI hostname should be used.
Using "" as the default for both, also means that the monitor
commands "info migrate_parameters" / "query-migrate-parameters"
will report existance of tls-creds/tls-parameters even when set
to their default values.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In function cpu_physical_memory_sync_dirty_bitmap, file
include/exec/ram_addr.h:
if (src[idx][offset]) {
unsigned long bits = atomic_xchg(&src[idx][offset], 0);
unsigned long new_dirty;
new_dirty = ~dest[k];
dest[k] |= bits;
new_dirty &= bits;
num_dirty += ctpopl(new_dirty);
}
After these codes executed, only the pages not dirtied in bitmap(dest),
but dirtied in dirty_memory[DIRTY_MEMORY_MIGRATION] will be calculated.
For example:
When ram_list.dirty_memory[DIRTY_MEMORY_MIGRATION] = 0b00001111,
and atomic_rcu_read(&migration_bitmap_rcu)->bmap = 0b00000011,
the new_dirty will be 0b00001100, and this function will return 2 but not
4 which is expected.
the dirty pages in dirty_memory[DIRTY_MEMORY_MIGRATION] are all new,
so these should be calculated also.
Signed-off-by: Chao Fan <fanc.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Migration is the only code left in the tree that does not react
to bdrv_is_allocated() failures. But as there is no useful way
to react to the failure, and we are merely skipping unallocated
sectors on success, just document that our choice of handling
is intended.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Note: The 'postcopy: Update userfaultfd.h header' is part of
Paolo's header update and will disappear if applied after it.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
-----BEGIN PGP SIGNATURE-----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=PCYv
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20170228a' into staging
Migration pull
Note: The 'postcopy: Update userfaultfd.h header' is part of
Paolo's header update and will disappear if applied after it.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
# gpg: Signature made Tue 28 Feb 2017 12:38:34 GMT
# gpg: using RSA key 0x0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20170228a: (27 commits)
postcopy: Add extra check for COPY function
postcopy: Add doc about hugepages and postcopy
postcopy: Check for userfault+hugepage feature
postcopy: Update userfaultfd.h header
postcopy: Allow hugepages
postcopy: Send whole huge pages
postcopy: Mask fault addresses to huge page boundary
postcopy: Load huge pages in one go
postcopy: Use temporary for placing zero huge pages
postcopy: Plumb pagesize down into place helpers
postcopy: Record largest page size
postcopy: enhance ram_block_discard_range for hugepages
exec: ram_block_discard_range
postcopy: Chunk discards for hugepages
postcopy: Transmit and compare individual page sizes
postcopy: Transmit ram size summary word
migration: fix use-after-free of to_dst_file
migration: Update docs to discourage version bumps
migration: fix id leak regression
migrate: Introduce a 'dc->vmsd' check to avoid segfault for --only-migratable
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQIcBAABAgAGBQJYtd8UAAoJEH8JsnLIjy/WuK0P/i3yi29JOZTEeUIUc+QXHm4b
iXRj/3uLwLD5IJqfjLeDmOPUfI+w0SAkGTidSlKrS5maypW366ke/+CY8QZtbxiH
qTazKrXNumhvJuJVXQ0L8bAwDC/r8pPlrvLJ3bfBOK6t6fu//M/nUZP/N92UMX87
w1xA+PNq1TNZEKC6VwdY50fsrhOxIR1ZoS2rEKseEBuYqTm2q5Q0Y8EXhbReO0LE
Pb0vAOEmZg6K2Awv4Cg2L8BZlz+tGgUd+3eWV8zzCshHkAc2J/OaxjLCG/KUgXb4
MbdACnIHOUOGqhLfM9wjrVYJAhM/4F1sR0hDm8uUngFWlWsGwTdhH5bRlfat3QQs
E4oNt6ORHiEis0l7pXfwHTDC3ChockArxdJlOvmpRm6EUSBs132IJS3TrlKBCr+R
CBdoC3k1eXC6uHF4KCrsnW2u26D4Ju9V6Yb5h/RqYPJCc+o16BsD31/WOLhH4WTq
M7A9ZbH4jBDHTO3A5zho0x7AGbVGDVMzKssU9MUOkUuPB+yM2KMg/Kr0kUDhrl0k
aOdRfCF+OcsiXzM97U3msv0udbHr0/tUtE+/3tL3kcXjEHoaFECUdV8mU9F3KleZ
5MQP2vNcAZA96zuV1qMhPlDwWBoEwBebDnvM3LuTvkHdbBQZv+6A6XiCw/hXdh6o
zyUn+/2KKGoPiNv/B6PD
=g3ew
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Tue 28 Feb 2017 20:35:32 GMT
# gpg: using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (46 commits)
block: Add Error parameter to bdrv_append()
block: Add Error parameter to bdrv_set_backing_hd()
block: Assertions for resize permission
block: Assertions for write permissions
block: Pass BdrvChild to bdrv_aligned_preadv/pwritev and copy-on-read
tests: Remove FIXME comments
nbd/server: Use real permissions for NBD exports
migration/block: Use real permissions
hmp: Request permissions in qemu-io
commit: Add filter-node-name to block-commit
mirror: Add filter-node-name to blockdev-mirror
stream: Use real permissions in streaming block job
mirror: Use real permissions in mirror/active commit block job
blockjob: Factor out block_job_remove_all_bdrv()
block: Allow backing file links in change_parent_backing_link()
block: BdrvChildRole.attach/detach() callbacks
block: Fix pending requests check in bdrv_append()
backup: Use real permissions in backup block job
commit: Use real permissions for HMP 'commit'
commit: Use real permissions in commit block job
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Request BLK_PERM_CONSISTENT_READ for the source of block migration, and
handle potential permission errors as good as we can in this place
(which is not very good, but it matches the other failure cases).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Now that blk_insert_bs() requests the BlockBackend permissions for the
node it attaches to, it can fail. Instead of aborting, pass the errors
to the callers.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
We want every user to be specific about the permissions it needs, so
we'll pass the initial permissions as parameters to blk_new(). A user
only needs to call blk_set_perm() if it wants to change the permissions
after the fact.
The permissions are stored in the BlockBackend and applied whenever a
BlockDriverState should be attached in blk_insert_bs().
This does not include actually choosing the right set of permissions
everywhere yet. Instead, the usual FIXME comment is added to each place
and will be addressed in individual patches.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
We can call this qmp command to do checkpoint outside of qemu.
Xen colo will need this function.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wencongyang@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
We can call this qmp command to start/stop replication outside of qemu.
Like Xen colo need this function.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wencongyang@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
As an extra sanity check, make sure the region we're registering
can perform UFFDIO_COPY; the COPY will fail later but this
gives a cleaner failure.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170224182844.32452-17-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We need extra Linux kernel support (~4.11) to support userfaults
on hugetlbfs; check for them.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170224182844.32452-15-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Allow huge pages in postcopy.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170224182844.32452-13-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The RAM save code uses ram_save_host_page to send whole
host pages at a time; change this to use the host page size associated
with the RAM Block which may be a huge page.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170224182844.32452-12-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Currently the fault address received by userfault is rounded to
the host page boundary and a host page is requested from the source.
Use the current RAMBlock page size instead of the general host page
size so that for RAMBlocks backed by huge pages we request the whole
huge page.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170224182844.32452-11-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The existing postcopy RAM load loop already ensures that it
glues together whole host-pages from the target page size chunks sent
over the wire. Modify the definition of host page that it uses
to be the RAM block page size and thus be huge pages where appropriate.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170224182844.32452-10-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The kernel can't do UFFDIO_ZEROPAGE for huge pages, so we have
to allocate a temporary (always zero) page and use UFFDIO_COPYPAGE
on it.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170224182844.32452-9-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Now we deal with normal size pages and huge pages we need
to tell the place handlers the size we're dealing with
and make sure the temporary page is large enough.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170224182844.32452-8-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Record the largest page size in use; we'll need it soon for allocating
temporary buffers.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170224182844.32452-7-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Create ram_block_discard_range in exec.c to replace
postcopy_ram_discard_range and most of ram_discard_range.
Those two routines are a bit of a weird combination, and
ram_discard_range is about to get more complex for hugepages.
It's OS dependent code (so shouldn't be in migration/ram.c) but
it needs quite a bit of the innards of RAMBlock so doesn't belong in
the os*.c.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170224182844.32452-5-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
At the start of the postcopy phase, partially sent huge pages
must be discarded. The code for dealing with host page sizes larger
than the target page size can be reused for this case.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170224182844.32452-4-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When using postcopy with hugepages, we require the source
and destination page sizes for any RAMBlock to match; note
that different RAMBlocks in the same VM can have different
page sizes.
Transmit them as part of the RAM information header and
fail if there's a difference.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20170224182844.32452-3-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Replace the host page-size in the 'advise' command by a pagesize
summary bitmap; if the VM is just using normal RAM then
this will be exactly the same as before, however if they're using
huge pages they'll be different, and thus:
a) Migration from/to old qemu's that don't understand huge pages
will fail early.
b) Migrations with different size RAMBlocks will also fail early.
This catches it very early; earlier than the detailed per-block
check in the next patch.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20170224182844.32452-2-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
hmp_savevm calls qemu_savevm_state(f), which sets to_dst_file=f in
global migration state. Then hmp_savevm closes f (g_free called).
Next access to to_dst_file in migration state (for example,
qmp_migrate_set_speed) will use it after it was freed.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170225193155.447462-5-vsementsov@virtuozzo.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This leak was introduced in commit
581f08bac2.
(it stands out quickly with ASAN once the rest of the leaks are also
removed from make check with this series)
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170221141451.28305-31-marcandre.lureau@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Commit a3a3d8c7 introduced a segfault bug while checking for
'dc->vmsd->unmigratable' which caused QEMU to crash when trying to add
devices which do no set their 'dc->vmsd' yet while initialization.
Place a 'dc->vmsd' check prior to it so that we do not segfault for
such devices.
NOTE: This doesn't compromise the functioning of --only-migratable
option as all the unmigratable devices do set their 'dc->vmsd'.
Introduce a new function check_migratable() and move the
only_migratable check inside it, also use stubs to avoid user-mode qemu
build failures.
Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Message-Id: <1487009088-23891-1-git-send-email-ashijeetacharya@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Make VMS_ARRAY_OF_POINTER cope with null pointers. Previously the
reward for trying to migrate an array with some null pointers in it was
an illegal memory access, that is a swift and painless death of the
process. Let's make vmstate cope with this scenario.
The general approach is, when we encounter a null pointer (element),
instead of following the pointer to save/load the data behind it, we
save/load a placeholder. This way we can detect if we expected a null
pointer at the load side but not null data was saved instead.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Guenther Hutzl <hutzl@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170222160119.52771-4-pasic@linux.vnet.ibm.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Currently vmstate_base_addr does several things: it pinpoints the field
within the struct, possibly allocates memory and possibly does the first
pointer dereference. Obviously allocation is needed only for load.
Let us split up the functionality in vmstate_base_addr and move the
address manipulations (that is everything but the allocation logic) to
load and save so it becomes more obvious what is actually going on. Like
this all the address calculations (and the handling of the flags
controlling these) is in one place and the sequence is more obvious.
The newly introduced function vmstate_handle_alloc also fixes the
allocation for the unused VMS_VBUFFER|VMS_MULTIPLY|VMS_ALLOC scenario
and is substantially simpler than the original vmstate_base_addr.
In load and save some asserts are added so it's easier to debug
situations where we would end up with a null pointer dereference.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170222160119.52771-3-pasic@linux.vnet.ibm.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The vmstate_(load|save)_state start out with an a void *opaque pointing
to some struct, and manipulate one or more elements of one field within
that struct.
First the field within the struct is pinpointed as opaque + offset, then
if this is a pointer the pointer is dereferenced to obtain a pointer to
the first element of the vmstate field. Pointers to further elements if
any are calculated as first_element + i * element_size (where i is the
zero based index of the element in question).
Currently base_addr and addr is used as a variable name for the pointer
to the first element and the pointer to the current element being
processed. This is suboptimal because base_addr is somewhat
counter-intuitive (because obtained as base + offset) and both base_addr
and addr not very descriptive (that we have a pointer should be clear
from the fact that it is declared as a pointer).
Let make things easier to understand by renaming base_addr to first_elem
and addr to curr_elem. This has the additional benefit of harmonizing
with other names within the scope (n_elems, vmstate_n_elems).
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170222160119.52771-2-pasic@linux.vnet.ibm.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Using QMP, the error message of 'migrate_set_downtime' was displaying
the values in milliseconds, being misleading with the command that
accepts the value in seconds:
{ "execute": "migrate_set_downtime", "arguments": {"value": 3000}}
{"error": {"class": "GenericError", "desc": "Parameter 'downtime_limit'
expects an integer in the range of 0 to 2000000 milliseconds"}}
This message is also seen in HMP when trying to set the same
parameter:
(qemu) migrate_set_parameter downtime-limit 3000000
Parameter 'downtime_limit' expects an integer in the range of 0 to
2000000 milliseconds
To allow for a proper error message when using QMP, a validation
of the user input was added in 'qmp_migrate_set_downtime'.
Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Message-Id: <20170222151729.5812-1-danielhb@linux.vnet.ibm.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
VMSTATE_WITH_TMP is for handling structures where some calculation
or rearrangement of the data needs to be performed before the data
hits the wire.
For example, where the value on the wire is an offset from a
non-migrated base, but the data in the structure is the actual pointer.
To use it, a temporary type is created and a vmsd used on that type.
The first element of the type must be 'parent' a pointer back to the
type of the main structure. VMSTATE_WITH_TMP takes care of allocating
and freeing the temporary before running the child vmsd.
The post_load/pre_save on the child vmsd can copy things from the parent
to the temporary using the parent pointer and do any other calculations
needed; it can then use normal VMSD entries to do the actual data
storage without having to fiddle around with qemu_get_*/qemu_put_*
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20170203160651.19917-3-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We should not do failover work while the main thread is loading
VM's state. Otherwise the consistent of VM's memory and
device state will be broken.
We will restart the loading process after jump over the stage,
The new failover status 'RELAUNCH' will help to record if we
need to restart the process.
Cc: Eric Blake <eblake@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1484657864-21708-4-git-send-email-zhang.zhanghailiang@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Added a missing '(Since 2.9)'
If the net connection between primary host and secondary host breaks
while COLO/COLO incoming threads are doing read() or write().
It will block until connection is timeout, and the failover process
will be blocked because of it.
So it is necessary to shutdown all the socket fds used by COLO
to avoid this situation. Besides, we should close the corresponding
file descriptors after failvoer BH shutdown them,
Or there will be an error.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1484657864-21708-3-git-send-email-zhang.zhanghailiang@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
If we set checkpoint-delay through command 'migrate-set-parameters',
It will not take effect until we finish last sleep chekpoint-delay,
That's will be offensive espeically when we want to change its value
from an extreme big one to a proper value.
Fix it by using timer to realize checkpoint-delay.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Message-Id: <1484657864-21708-2-git-send-email-zhang.zhanghailiang@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The member VMStateField.start is used for two things, partial data
migration for VBUFFER data (basically provide migration for a
sub-buffer) and for locating next in QTAILQ.
The implementation of the VBUFFER feature is broken when VMSTATE_ALLOC
is used. This however goes unnoticed because actually partial migration
for VBUFFER is not used at all.
Let's consolidate the usage of VMStateField.start by removing support
for partial migration for VBUFFER.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20170203175217.45562-1-pasic@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
