The test case assumes that a drain only happens in one specific place
where it drains explicitly. This assumption happened to hold true until
now, but block layer functions may drain interally (any graph
modifications are going to do that through bdrv_graph_wrlock()), so this
is incorrect. Make sure that the test code in .drained_begin only runs
where we actually want it to run.
When scheduling a BH from .drained_begin, we also need to increase the
in_flight counter to make sure that the operation is actually completed
in time before the node that it works on goes away.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20221207131838.239125-10-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In order to make sure that bdrv_replace_child_noperm() doesn't have to
poll any more, get rid of the bdrv_parent_drained_begin_single() call.
This is possible now because we can require that the parent is already
drained through the child in question when the function is called and we
don't call the parent drain callbacks more than once.
The additional drain calls needed in callers cause the test case to run
its code in the drain handler too early (bdrv_attach_child() drains
now), so modify it to only enable the code after the test setup has
completed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20221118174110.55183-15-kwolf@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We only need to call both the BlockDriver's callback and the parent
callbacks when going from undrained to drained or vice versa. A second
drain section doesn't make a difference for the driver or the parent,
they weren't supposed to send new requests before and after the second
drain.
One thing that gets in the way is the 'ignore_bds_parents' parameter in
bdrv_do_drained_begin_quiesce() and bdrv_do_drained_end(): It means that
bdrv_drain_all_begin() increases bs->quiesce_counter, but does not
quiesce the parent through BdrvChildClass callbacks. If an additional
drain section is started now, bs->quiesce_counter will be non-zero, but
we would still need to quiesce the parent through BdrvChildClass in
order to keep things consistent (and unquiesce it on the matching
bdrv_drained_end(), even though the counter would not reach 0 yet as
long as the bdrv_drain_all() section is still active).
Instead of keeping track of this, let's just get rid of the parameter.
It was introduced in commit 6cd5c9d7b2 as an optimisation so that
during bdrv_drain_all(), we wouldn't recursively drain all parents up to
the root for each node, resulting in quadratic complexity. As it happens,
calling the callbacks only once solves the same problem, so as of this
patch, we'll still have O(n) complexity and ignore_bds_parents is not
needed any more.
This patch only ignores the 'ignore_bds_parents' parameter. It will be
removed in a separate patch.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20221118174110.55183-12-kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Subtree drains are not used any more. Remove them.
After this, BdrvChildClass.attach/detach() don't poll any more.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20221118174110.55183-11-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Polling during bdrv_drained_end() can be problematic (and in the future,
we may get cases for bdrv_drained_begin() where polling is forbidden,
and we don't care about already in-flight requests, but just want to
prevent new requests from arriving).
The .bdrv_drained_begin/end callbacks running in a coroutine is the only
reason why we have to do this polling, so make them non-coroutine
callbacks again. None of the callers actually yield any more.
This means that bdrv_drained_end() effectively doesn't poll any more,
even if AIO_WAIT_WHILE() loops are still there (their condition is false
from the beginning). This is generally not a problem, but in
test-bdrv-drain, some additional explicit aio_poll() calls need to be
added because the test case wants to verify the final state after BHs
have executed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20221118174110.55183-4-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We want to change .bdrv_co_drained_begin/end() back to be non-coroutine
callbacks, so in preparation, avoid yielding in their implementation.
This does almost the same as the existing logic in bdrv_drain_invoke(),
by creating and entering coroutines internally. However, since the test
case is by far the heaviest user of coroutine code in drain callbacks,
it is preferable to have the complexity in the test case rather than the
drain core, which is already complicated enough without this.
The behaviour for bdrv_drain_begin() is unchanged because we increase
bs->in_flight and this is still polled. However, bdrv_drain_end()
doesn't wait for the spawned coroutine to complete any more. This is
fine, we don't rely on bdrv_drain_end() restarting all operations
immediately before the next aio_poll().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20221118174110.55183-3-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
No functional change intended.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20221025084952.2139888-11-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bs->file and bs->backing are a kind of duplication of part of
bs->children. But very useful diplication, so let's not drop them at
all:)
We should manage bs->file and bs->backing in same place, where we
manage bs->children, to keep them in sync.
Moreover, generic io paths are unprepared to BdrvChild without a bs, so
it's double good to clear bs->file / bs->backing when we detach the
child.
Detach is simple: if we detach bs->file or bs->backing child, just
set corresponding field to NULL.
Attach is a bit more complicated. But we still can precisely detect
should we set one of bs->file / bs->backing or not:
- if role is BDRV_CHILD_COW, we definitely deal with bs->backing
- else, if role is BDRV_CHILD_FILTERED (it must be also
BDRV_CHILD_PRIMARY), it's a filtered child. Use
bs->drv->filtered_child_is_backing to chose the pointer field to
modify.
- else, if role is BDRV_CHILD_PRIMARY, we deal with bs->file
- in all other cases, it's neither bs->backing nor bs->file. It's some
other child and we shouldn't care
OK. This change brings one more good thing: we can (and should) get rid
of all indirect pointers in the block-graph-change transactions:
bdrv_attach_child_common() stores BdrvChild** into transaction to clear
it on abort.
bdrv_attach_child_common() has two callers: bdrv_attach_child_noperm()
just pass-through this feature, bdrv_root_attach_child() doesn't need
the feature.
Look at bdrv_attach_child_noperm() callers:
- bdrv_attach_child() doesn't need the feature
- bdrv_set_file_or_backing_noperm() uses the feature to manage
bs->file and bs->backing, we don't want it anymore
- bdrv_append() uses the feature to manage bs->backing, again we
don't want it anymore
So, we should drop this stuff! Great!
We could probably keep BdrvChild** argument to keep the int return
value, but it seems not worth the complexity.
Finally, we now set .file / .backing automatically in generic code and
want to restring setting them by hand outside of .attach/.detach.
So, this patch cleanups all remaining places where they were set.
To find such places I use:
git grep '\->file ='
git grep '\->backing ='
git grep '&.*\<backing\>'
git grep '&.*\<file\>'
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220726201134.924743-14-vsementsov@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We do add COW child to the node. In future we are going to forbid
adding COW child to the node that doesn't support backing. So, fix it
here now.
Don't worry about setting bs->backing itself: in further commit we'll
update the block-layer to automatically set/unset this field in generic
code.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220726201134.924743-6-vsementsov@yandex-team.ru>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Change the job_{lock/unlock} and macros to use job_mutex.
Now that they are not nop anymore, remove the aiocontext
to avoid deadlocks.
Therefore:
- when possible, remove completely the aiocontext lock/unlock pair
- if it is used by some other function too, reduce the locking
section as much as possible, leaving the job API outside.
- change AIO_WAIT_WHILE in AIO_WAIT_WHILE_UNLOCKED, since we
are not using the aiocontext lock anymore
The only functions that still need the aiocontext lock are:
- the JobDriver callbacks, already documented in job.h
- job_cancel_sync() in replication.c is called with aio_context_lock
taken, but now job is using AIO_WAIT_WHILE_UNLOCKED so we need to
release the lock.
Reduce the locking section to only cover the callback invocation
and document the functions that take the AioContext lock,
to avoid taking it twice.
Also remove real_job_{lock/unlock}, as they are replaced by the
public functions.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220926093214.506243-19-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add missing job synchronization in the unit tests, with
explicit locks.
We are deliberately using _locked functions wrapped by a guard
instead of a normal call because the normal call will be removed
in future, as the only usage is limited to the tests.
In other words, if a function like job_pause() is/will be only used
in tests to avoid:
WITH_JOB_LOCK_GUARD(){
job_pause_locked();
}
then it is not worth keeping job_pause(), and just use the guard.
Note: at this stage, job_{lock/unlock} and job lock guard macros
are *nop*.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20220926093214.506243-10-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are going to drop BlockJob.blk in further commit. For tests it's
enough to simply pass bs pointer.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Nikita Lapshin <nikita.lapshin@virtuozzo.com>
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.
Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
So, convert driver read handlers parameters which are already 64bit to
signed type.
While being here, convert also flags parameter to be BdrvRequestFlags.
Now let's consider all callers. Simple
git grep '\->bdrv_\(aio\|co\)_preadv\(_part\)\?'
shows that's there three callers of driver function:
bdrv_driver_preadv() in block/io.c, passes int64_t, checked by
bdrv_check_qiov_request() to be non-negative.
qcow2_load_vmstate() does bdrv_check_qiov_request().
do_perform_cow_read() has uint64_t argument. And a lot of things in
qcow2 driver are uint64_t, so converting it is big job. But we must
not work with requests that don't satisfy bdrv_check_qiov_request(),
so let's just assert it here.
Still, the functions may be called directly, not only by drv->...
Let's check:
git grep '\.bdrv_\(aio\|co\)_preadv\(_part\)\?\s*=' | \
awk '{print $4}' | sed 's/,//' | sed 's/&//' | sort | uniq | \
while read func; do git grep "$func(" | \
grep -v "$func(BlockDriverState"; done
The only one such caller:
QEMUIOVector qiov = QEMU_IOVEC_INIT_BUF(qiov, &data, 1);
...
ret = bdrv_replace_test_co_preadv(bs, 0, 1, &qiov, 0);
in tests/unit/test-bdrv-drain.c, and it's OK obviously.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210903102807.27127-4-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: fix typos]
Signed-off-by: Eric Blake <eblake@redhat.com>
Move supports_backing check of bdrv_reopen_parse_backing to called
(through bdrv_set_backing_noperm()) bdrv_set_file_or_backing_noperm()
function. The check applies to general case, so it's appropriate for
bdrv_set_file_or_backing_noperm().
We have to declare backing support for two test drivers, otherwise new
check fails.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210610120537.196183-7-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We have too much comments for this feature. It seems better just don't
do it. Most of real users (tests don't count) have to create additional
reference.
Drop also comment in external_snapshot_prepare:
- bdrv_append doesn't "remove" old bs in common sense, it sounds
strange
- the fact that bdrv_append can fail is obvious from the context
- the fact that we must rollback all changes in transaction abort is
known (it's the direct role of abort)
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210428151804.439460-5-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The main tests directory still looks very crowded, and it's not
clear which files are part of a unit tests and which belong to
a different test subsystem. Let's clean up the mess and move the
unit tests to a separate directory.
Message-Id: <20210310063314.1049838-1-thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
