Each operand can have a maximum length of 16. Make sure to prepare all
reads/writes before writing.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Access at most single pages and document why. Using the access helpers
might over-indicate watchpoints within the same page, I guess we can
live with that.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
We can process a maximum of 256 bytes, crossing two pages.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
We can process a maximum of 256 bytes, crossing two pages.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
We can process a maximum of 256 bytes, crossing two pages. Calculate the
accessed range upfront - src is accessed right-to-left.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
We can process a maximum of 256 bytes, crossing two pages.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
We can process a maximum of 256 bytes, crossing two pages. While at it,
increment the length once.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
We can process a maximum of 256 bytes, crossing two pages.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
The last remaining bit is padding with two bytes.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
The last remaining bit for MVC is handling destructive overlaps in a
fault-safe way.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
As we are moving between address spaces, we can use access_memmove()
without checking for destructive overlaps (especially of real storage
locations):
"Each storage operand is processed left to right. The
storage-operand-consistency rules are the same as
for MOVE (MVC), except that when the operands
overlap in real storage, the use of the common real-
storage locations is not necessarily recognized."
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Replace fast_memmove() variants by access_memmove() variants, that
first try to probe access to all affected pages (maximum is two pages).
Introduce access_get_byte()/access_set_byte(). We might be able to speed
up memmove in special cases even further (do single-byte access, use
memmove() for remaining bytes in page), however, we'll skip that for now.
In MVCOS, simply always call access_memmove_as() and drop the TODO
about LAP. LAP is already handled in the MMU.
Get rid of adj_len_to_page(), which is now unused.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Replace fast_memset() by access_memset(), that first tries to probe
access to all affected pages (maximum is two). We'll use the same
mechanism for other types of accesses soon.
Only in very rare cases (especially TLB_NOTDIRTY), we'll have to
fallback to ld/st helpers. Try to speed up that case as suggested by
Richard.
We'll rework most involved handlers soon to do all accesses via new
fault-safe helpers, especially MVC.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Although we basically ignore the index all the time for CONFIG_USER_ONLY,
let's simply skip all the checks and always return MMU_USER_IDX in
cpu_mmu_index() and get_mem_index().
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
24 and 31-bit address space handling is wrong when it comes to storing
back the addresses to the register.
While at it, read gprs 0 implicitly.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Bit position 32-55 of general register 0 must be zero.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
... and don't perform any move in case the length is zero.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Triggered by a review comment from Richard, also MVCOS has a 32-bit
length in 24/31-bit addressing mode. Add a new helper.
Rename wrap_length() to wrap_length31().
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Let's stay within single pages.
... and indicate cc=3 in case there is work remaining. Keep unicode
padding simple.
While reworking, properly wrap the addresses.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
We have to mask of any unused bits. While at it, document what exactly is
missing.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Perform the checks documented in the PoP.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Let's use the new helper, that also detects destructive overlaps when
wrapping.
We'll make the remaining code (e.g., fast_memmove()) aware of wrapping
later.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Let's increment the length once.
While at it, cleanup the comment. The memset() example is given as a
programming note in the PoP, so drop the description.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Process max 4k bytes at a time, writing back registers between the
accesses. The instruction is interruptible.
"For operands longer than 2K bytes, access exceptions are not
recognized for locations more than 2K bytes beyond the current location
being processed."
Note that on z/Architecture, 2k vs. 4k access cannot get differentiated as
long as pages are not crossed. This seems to be a leftover from ESA/390.
Simply stay within single pages.
MVCL handling is quite different than MVCLE/MVCLU handling, so split up
the handlers.
Defer interrupt handling, as that will require more thought, add a TODO
for that.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
We'll have to zero-out unused bit positions, so make sure to write the
addresses back.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
We have to zero out unused bits in 24 and 31-bit addressing mode.
Provide a new helper.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
We use the marker "-1" for "no exception". s390_cpu_do_interrupt() might
get confused by that.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Since QEMU v2.10, the KVM acceleration does not work on older kernels
anymore since the code accidentally requires the KVM_CAP_DEVICE_CTRL
capability now - it should have been optional instead.
Instead of fixing the bug, we asked in the ChangeLog of QEMU 2.11 - 3.0
that people should speak up if they still need support of QEMU running
with KVM on older kernels, but seems like nobody really complained.
Thus let's make this official now and turn it into a proper error
message, telling the users to use at least kernel 3.15 now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190913091443.27565-1-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The "access" arguments clash with a macro under Windows with MinGW:
CC m68k-softmmu/target/m68k/fpu_helper.o
target/m68k/fpu_helper.c: In function 'fmovem_predec':
target/m68k/fpu_helper.c:405:56: error: macro "access" passed 4 arguments,
but takes just 2
size = access(env, addr, &env->fregs[i], ra);
So this renames them access_fn.
Tested with:
./configure --target-list=m68k-softmmu
make -j8
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1568296920-29939-1-git-send-email-frederic.konrad@adacore.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
While debugging an application with GDB the following might happen:
(gdb) return
Make xxx return now? (y or n) y
Could not fetch register "fflags"; remote failure reply 'E14'
This is because riscv_gdb_get_fpu calls riscv_csrrw_debug with a wrong csr
number (8). It should use the csr_register_map in order to reach the
riscv_cpu_get_fflags callback.
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Use the TB_FLAGS_MSTATUS_FS macro when enabling floating point in the tb
flags.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This is meant to mask off the hypervisor bits, but a typo caused it to
mask MPP instead.
Fixes: 1f0419cb04 ("target/riscv: Allow setting mstatus virtulisation bits")
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Use both the generic register name and ABI name for the general purpose
registers and floating point registers.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This adds 'info mem' command for RISC-V, to show virtual memory
mappings that aids debugging.
Rather than showing every valid PTE, the command compacts the
output by merging all contiguous physical address mappings into
one block and only shows the merged block mapping details.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
For RV32, the root page table's PPN has 22 bits hence its address
bits could be larger than the maximum bits that target_ulong is
able to represent. Use hwaddr instead.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Update the Hypervisor CSR addresses to match the v0.4 spec.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Let's create a function that tests if floating point support is
enabled. We can then protect all floating point operations based on if
they are enabled.
This patch so far doesn't change anything, it's just preparing for the
Hypervisor support for floating point operations.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Christophe de Dinechin <dinechin@redhat.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Use the always-compiled trace events, remove the now unused
RISCV_DEBUG_PMP definition.
Note pmpaddr_csr_read() could previously do out-of-bound accesses
passing addr_index >= MAX_RISCV_PMPS.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
The RISC-V Physical Memory Protection is restricted to privileged
modes. Restrict its compilation to QEMU system builds.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Switch the SPARC target from the old unassigned_access hook to the
new do_transaction_failed hook.
This will cause the "if transaction failed" code paths added in
the previous commits to become active if the access is to an
unassigned address. In particular we'll now handle bus errors
during page table walks correctly (generating a translation
error with the right kind of fault status).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 20190801183012.17564-8-peter.maydell@linaro.org
The dump_mmu() function does a ldl_phys() at the start, but
then never uses the value it loads at all. Remove the
unused code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 20190801183012.17564-7-peter.maydell@linaro.org
Convert the mmu_probe() function to using address_space_ldl()
rather than ldl_phys(), so we can explicitly detect memory
transaction failures.
This makes no practical difference at the moment, because
ldl_phys() will return 0 on a transaction failure, and we
treat transaction failures and 0 PDEs identically. However
the spec says that MMU probe operations are supposed to
update the fault status registers, and if we ever implement
that we'll want to distinguish the difference. For the
moment, just add a TODO comment about the bug.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 20190801183012.17564-6-peter.maydell@linaro.org
Currently we use the ldl_phys() function to read page table entries.
With the unassigned_access hook in place, if these hit an unassigned
area of memory then the hook will cause us to wrongly generate
an exception with a fault address matching the address of the
page table entry.
Change to using address_space_ldl() so we can detect and correctly
handle bus errors and give them their correct behaviour of
causing a translation error with a suitable fault status register.
Note that this won't actually take effect until we switch the
over to using the do_translation_failed hook.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 20190801183012.17564-5-peter.maydell@linaro.org
Currently the ld/st_asi helper functions make calls to the
ld*_phys() and st*_phys() functions for those ASIs which
imply direct accesses to physical addresses. These implicitly
rely on the unassigned_access hook to cause them to generate
an MMU fault if the access fails.
Switch to using the address_space_* functions instead, which
return a MemTxResult that we can check. This means that when
we switch SPARC over to using the do_transaction_failed hook
we'll still get the same MMU faults we did before.
This commit converts the ASIs which do MXCC stream source
and destination accesses.
It's not clear to me whether raising an MMU fault like this
is the correct behaviour if we encounter a bus error, but
we retain the same behaviour that the old unassigned_access
hook would implement.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 20190801183012.17564-4-peter.maydell@linaro.org
Currently the ld/st_asi helper functions make calls to the
ld*_phys() and st*_phys() functions for those ASIs which
imply direct accesses to physical addresses. These implicitly
rely on the unassigned_access hook to cause them to generate
an MMU fault if the access fails.
Switch to using the address_space_* functions instead, which
return a MemTxResult that we can check. This means that when
we switch SPARC over to using the do_transaction_failed hook
we'll still get the same MMU faults we did before.
This commit converts the ASIs which do "MMU passthrough".
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 20190801183012.17564-3-peter.maydell@linaro.org
Currently the SPARC target uses the old-style do_unassigned_access
hook. We want to switch it over to do_transaction_failed, but to do
this we must first remove all the direct calls in ldst_helper.c to
cpu_unassigned_access(). Factor out the body of the hook function's
code into a new sparc_raise_mmu_fault() and call it from the hook and
from the various places that used to call cpu_unassigned_access().
In passing, this fixes a bug where the code that raised the
MMU exception was directly calling GETPC() from a function that
was several levels deep in the callstack from the original
helper function: the new sparc_raise_mmu_fault() instead takes
the return address as an argument.
Other than the use of retaddr rather than GETPC() and a comment
format fixup, the body of the new function has no changes from
that of the old hook function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 20190801183012.17564-2-peter.maydell@linaro.org
