When iterating through the XSAVE feature enumeration CPUID leaf (0xD)
we should not stop at the first zero EAX, but instead keep scanning
since there are gaps in the enumeration (ECX=1 for instance).
This fixes the proper usage of AVX in KVM guests.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
kvm_arch_get_supported_cpuid checks for global cpuid restrictions, it
does not require any CPUState reference. Changing its interface allows
to call it before any VCPU is initialized.
CC: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
No longer needed with accompanied kernel headers.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
These FPU states are properly maintained by KVM but not yet by TCG. So
far we unconditionally set them to 0 in the guest which may cause
state corruptions, though not with modern guests.
To avoid breaking backward migration, use a conditional subsection that
is only written if any of the three fields is non-zero. The guest's
FNINIT clears them frequently, and cleared IA32_MISC_ENABLE MSR[2]
reduces the probability of non-zero values further so that this
subsection is not expected to restrict migration in any common scenario.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patchset enables a new CPU feature SMEP (Supervisor Mode Execution
Protection) in QEMU-KVM. SMEP prevents kernel from executing code in application.
Updated Intel SDM describes this CPU feature. The document will be published soon.
SMEP is identified by CPUID leaf 7 EBX[7], which is 0 before. Get the right value by query KVM kernel module, so that guest can get SMEP through CPUID.
Signed-off-by: Yang, Wei <wei.y.yang@intel.com>
Singed-off-by: Shan, Haitao <haitao.shan@intel.com>
Singed-off-by: Li, Xin <xin.li@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
When KVM is running on VIA CPU with host cpu's model, the
feautures of VIA CPU will be passed into kvm guest by calling
the CPUID instruction for Centaur.
Signed-off-by: BrillyWu<brillywu@viatech.com.cn>
Signed-off-by: KaryJin<karyjin@viatech.com.cn>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
While trying to use qemu -cpu pentium3 to test for incorrect uses of certain
SSE2 instructions, I found that QEMU allowed the mfence and lfence
instructions to be executed even though Pentium 3 doesn't support them.
According to the processor specs (and experience on a real Pentium 3), these
instructions are only available with SSE2, but QEMU is checking for SSE. The
check for the related sfence instruction is correct (it works with SSE).
This trival patch fixes the test.
Signed-off-by: Martin Simmons <martin@lispworks.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This patch removes all references to signal.h when qemu-common.h is included
as they become redundant.
Signed-off-by: Alexandre Raymond <cerbere@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Instead of using a table which doesn't correspond to anything from
physical in the CPU, use directly the constants in helper_fld*_ST0().
Cc: Andreas Färber <andreas.faerber@web.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Now that target-i386 uses softfloat, floatx80 is always available and
there is no need anymore to have code handling both float64 and floax80.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This interrupt name is used by i386, CRIS, and MicroBlaze.
Copy the name into each target.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
SMI, VIRQ, INIT, SIPI, and MCE are all only used by the i386 port.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
We have two bits that can represent kvmclock in cpuid.
They signal the guest which msr set to use. When we tweak flags
involving this value - specially when we use "-", we have to act on both.
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
kvmclock is represented by two feature bits. Therefore, lookup_feature
needs to continue its search even after the first match. Enhance it
accordingly and switch to a bool return type at this chance.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Use the features provided by KVM_GET_SUPPORTED_CPUID directly to
mask out features from guest-visible cpuid.
The old get_para_features() mechanism is kept for older kernels that do not implement it.
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Use the new CPU86_LDouble <-> double conversion functions to make logarithmic
and trigonometric helpers working with softfloat.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add functions to convert CPU86_LDouble to double and vice versa. They
are going to be used to implement logarithmic and trigonometric function
until softfloat implement them.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
With softfloat it's not possible to play with the overflow of an
unsigned value to get the 0 case partially correct. Use a special case
for that. Using a division to generate an infinity is the easiest way
that works for both softfloat and softfloat-native.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Use the scalbn softfloat function to implement helper_fscale(). This
fixes corner cases (e.g. NaN) and makes a few more GNU libc math tests
to pass.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The previous patch removed the need for parameter puc.
Is is now unused, so remove it.
Cc: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Function gen_pc_load was introduced in commit
d2856f1ad4.
The only reason for parameter searched_pc was
a debug statement in target-i386/translate.c.
Parameter puc was needed by target-sparc until
commit d7da2a1040.
Remove searched_pc from the debug statement and remove both
parameters from the parameter list of gen_pc_load.
As the function name gen_pc_load was also misleading,
it is now called restore_state_to_opc. This new name
was suggested by Peter Maydell, thanks.
v2: Remove last parameter, too, and rename the function.
v3: Fix [] typo in target-arm/translate.c.
Fix wrong SHA1 object name in commit message (copy+paste error).
Cc: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
float*_eq functions have a different semantics than other comparison
functions. Fix that by first renaming float*_quiet() into float*_eq_quiet().
Note that it is purely mechanical, and the behaviour should be unchanged.
That said it clearly highlight problems due to this different semantics,
they are fixed later in this patch series.
Cc: Alexander Graf <agraf@suse.de>
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
SSE instructions CMPUNORDPS/D and CMPORDPS/D do not trigger an invalid
exception if operands are qNANs.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add floatx_{add,mul,sub} defines, and use them instead of using direct
C operations.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Use float unions from cpu-all.h instead of redefining new (wrong for arm)
ones in target-i386. This also allows building cpu-exec.o with softfloat.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Use CPU_LDoubleU in cpu_dump_state() instead of redefining a union for
doing the conversion.
Based on a patch from Laurent Vivier <laurent@vivier.eu>.
Cc: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
tcg_gen_exit_tb takes a parameter of type tcg_target_long,
so the type casts of pointer to long should be replaced by
type casts of pointer to tcg_target_long (suggested by Blue Swirl).
These changes are needed for build environments where
sizeof(long) != sizeof(void *), especially for w64.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This reverts commit c995b495b9.
From Jan Kiszka:
Ouch, indeed. Moreover, CPU_SAVE_VERSION was not updated (likely the
reason for the breakage). Thanks for debugging this!
Anthony (or whoever), please revert this unneeded commit in qemu.git.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
There are no generic bits remaining in the handling of KVM_EXIT_DEBUG.
So push its logic completely into arch hands, i.e. only x86 so far.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Required for next patch which will access guest debug services from
kvm_arch_handle_exit. No functional changes.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Make the return code of kvm_arch_handle_exit directly usable for
kvm_cpu_exec. This is straightforward for x86 and ppc, just s390
would require more work. Avoid this for now by pushing the return code
translation logic into s390's kvm_arch_handle_exit.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
CC: Alexander Graf <agraf@suse.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Conforming to the Intel spec, set the power-on value of PAT also on
reset, but save it across INIT.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
When an external interrupt is pending but IF is cleared, we must not
leave the halt state prematurely.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
In Linux kernel HWPoison processing implementation, the virtual
address in processes mapping the error physical memory page is marked
as HWPoison. So that, the further accessing to the virtual
address will kill corresponding processes with SIGBUS.
If the error physical memory page is used by a KVM guest, the SIGBUS
will be sent to QEMU, and QEMU will simulate a MCE to report that
memory error to the guest OS. If the guest OS can not recover from
the error (for example, the page is accessed by kernel code), guest OS
will reboot the system. But because the underlying host virtual
address backing the guest physical memory is still poisoned, if the
guest system accesses the corresponding guest physical memory even
after rebooting, the SIGBUS will still be sent to QEMU and MCE will be
simulated. That is, guest system can not recover via rebooting.
In fact, across rebooting, the contents of guest physical memory page
need not to be kept. We can allocate a new host physical page to
back the corresponding guest physical address.
This patch fixes this issue in QEMU-KVM via calling qemu_ram_remap()
to clear the corresponding page table entry, so that make it possible
to allocate a new page to recover the issue.
[ Jan: rebasing and tiny cleanups]
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
There is no reason to continue if the kernel claims to support MCE but
then fails to process our request.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
CC: Huang Ying <ying.huang@intel.com>
CC: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
CC: Jin Dongming <jin.dongming@np.css.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
There is nothing to abstract here. Fold kvm_setup_mce into its caller
and fix up the error reporting (return code of kvm_vcpu_ioctl holds the
error value).
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
CC: Huang Ying <ying.huang@intel.com>
CC: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
CC: Jin Dongming <jin.dongming@np.css.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This switches KVM's MCE injection path to cpu_x86_inject_mce, both for
SIGBUS and monitor initiated events. This means we prepare the MCA MSRs
in the VCPUState also for KVM.
We have to drop the MSRs writeback restrictions for this purpose which
is now safe as every uncoordinated MSR injection is removed with this
patch.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
CC: Huang Ying <ying.huang@intel.com>
CC: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
CC: Jin Dongming <jin.dongming@np.css.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
We will use the current TCG-only MCE injection path for KVM as well, and
then this read-modify-write of the target VCPU state has to be performed
synchronously in the corresponding thread.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The current way of injecting MCE events without updating of and
synchronizing with the CPUState is broken and causes spurious
corruptions of the MCE-related parts of the CPUState.
As a first step towards a fix, enhance the state writeback code with
support for injecting events that are pending in the CPUState. A pending
exception will then be signaled via cpu_interrupt(CPU_INTERRUPT_MCE).
And, just like for TCG, we need to leave the halt state when
CPU_INTERRUPT_MCE is pending (left broken for the to-be-removed old KVM
code).
This will also allow to unify TCG and KVM injection code.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
CC: Huang Ying <ying.huang@intel.com>
CC: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
CC: Jin Dongming <jin.dongming@np.css.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
