SocketAddressLegacy is a simple union, and simple unions are awkward:
they have their variant members wrapped in a "data" object on the
wire, and require additional indirections in C. SocketAddress is the
equivalent flat union. Convert all users of SocketAddressLegacy to
SocketAddress, except for existing external interfaces.
See also commit fce5d53..9445673 and 85a82e8..c5f1ae3.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-7-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Minor editing accident fixed, commit message and a comment tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The next commit will rename SocketAddressFlat to SocketAddress, and
the commit after that will replace most uses of SocketAddressLegacy by
SocketAddress, replacing most of this commit's renames right back.
Note that checkpatch emits a few "line over 80 characters" warnings.
The long lines are all temporary; the SocketAddressLegacy replacement
will shorten them again.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-5-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
I'm going to flatten SocketAddress: rename SocketAddress to
SocketAddressLegacy, SocketAddressFlat to SocketAddress, eliminate
SocketAddressLegacy except in external interfaces.
inet_parse() returns a newly allocated InetSocketAddress. Lift the
allocation from inet_parse() into its caller socket_parse() to prepare
for flattening SocketAddress.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-3-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Straightforward rebase]
I'm going to flatten SocketAddress: rename SocketAddress to
SocketAddressLegacy, SocketAddressFlat to SocketAddress, eliminate
SocketAddressLegacy except in external interfaces.
vsock_parse() returns a newly allocated VsockSocketAddress. Lift the
allocation from vsock_parse() into its caller socket_parse() to
prepare for flattening SocketAddress.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-2-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
SocketAddress is a simple union, and simple unions are awkward: they
have their variant members wrapped in a "data" object on the wire, and
require additional indirections in C. I intend to limit its use to
existing external interfaces. New ones should use SocketAddressFlat.
I further intend to convert all internal interfaces to
SocketAddressFlat. This helper should go away then.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1490895797-29094-8-git-send-email-armbru@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We have quite a few switches over SocketAddressKind. Some have case
labels for all enumeration values, others rely on a default label.
Some abort when the value isn't a valid SocketAddressKind, others
report an error then.
Unify as follows. Always provide case labels for all enumeration
values, to clarify intent. Abort when the value isn't a valid
SocketAddressKind, because the program state is messed up then.
Improve a few error messages while there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1490895797-29094-4-git-send-email-armbru@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Certain features make sense only with certain address families. For
instance, passing file descriptors requires AF_UNIX. Testing
SocketAddress's saddr->type == SOCKET_ADDRESS_KIND_UNIX is obvious,
but problematic: it can't recognize AF_UNIX when type ==
SOCKET_ADDRESS_KIND_FD.
Mark such tests of saddr->type TODO. We may want to check the address
family with getsockname() there.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1490895797-29094-2-git-send-email-armbru@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
We first snprintf() to a fixed buffer, then g_strdup() the result
*boggle*.
Worse, the size of the fixed buffer INET6_ADDRSTRLEN + 5 + 4 is bogus:
the 4 correctly accounts for '[', ']', ':' and '\0', but
INET6_ADDRSTRLEN is not a suitable limit for inet->host, and 5 is not
one for inet->port! They are for host and port in *numeric* form
(exploiting that INET6_ADDRSTRLEN > INET_ADDRSTRLEN), but inet->host
can also be a hostname, and inet->port can be a service name, to be
resolved with getaddrinfo().
Fortunately, the only user so far is the "socket" network backend's
net_socket_connected(), which uses it to initialize a NetSocketState's
info_str[]. info_str[] has considerable more space: 256 instead of
55. So the bug's impact appears to be limited to truncated "info
networks" with the "socket" network backend.
The fix is obvious: use g_strdup_printf().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1490268208-23368-1-git-send-email-armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Currently DNS resolution is done automatically as part
of the creation of a QIOChannelSocket object instance.
This works ok for network clients where you just end
up a single network socket, but for servers, the results
of DNS resolution may require creation of multiple
sockets.
Introducing a DNS resolver API allows DNS resolution
to be separated from the socket object creation. This
will make it practical to create multiple QIOChannelSocket
instances for servers.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a 'numeric' flag to the InetSocketAddress struct to allow the
caller to indicate that DNS should be skipped for the host/port
fields. This is useful if the caller knows the address is already
numeric and wants to guarantee no (potentially blocking) DNS
lookups are attempted.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add the AF_VSOCK address family so that qemu-ga will be able to use
virtio-vsock.
The AF_VSOCK address family uses <cid, port> address tuples. The cid is
the unique identifier comparable to an IP address. AF_VSOCK does not
use name resolution so it's easy to convert between struct sockaddr_vm
and strings.
This patch defines a VsockSocketAddress instead of trying to piggy-back
on InetSocketAddress. This is cleaner in the long run since it avoids
lots of IPv4 vs IPv6 vs vsock special casing.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* treat trailing commas as garbage when parsing (Eric Blake)
* add configure check instead of checking AF_VSOCK directly
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Make inet_connect_saddr() in util/qemu-sockets.c public in order to be
able to use it with InetSocketAddress sockets outside of
util/qemu-sockets.c independently.
Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The QMP visitors have no direct dependency on QMP. It is
valid to use them anywhere that one has a QObject. Rename them
to better reflect their functionality as a generic QObject
to QAPI converter.
This is the first of three parts: rename the files. The next two
parts will rename C identifiers. The split is necessary to make git
rename detection work.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Split into file and identifier rename, two comments touched up]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Fix some coding style issues found in removing NonBlockingConnectHandler.
Cc: Daniel P. Berrange <berrange@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviwed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Message-Id: <1469696074-12744-3-git-send-email-caoj.fnst@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Follow CODING_STYLE
Cc: Daniel P. Berrange <berrange@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Message-Id: <1469703004-14800-1-git-send-email-caoj.fnst@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since commit e65c67e4, inet_listen() is not used anymore, and all
inet listen operation goes through QIOChannel.
Cc: Daniel P. Berrange <berrange@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Message-Id: <1469451771-1173-3-git-send-email-caoj.fnst@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is never used; all nonblocking connect now goes through
socket_connect(), which calls unix_connect_addr().
Cc: Daniel P. Berrange <berrange@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Message-Id: <1469097213-26441-3-git-send-email-caoj.fnst@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is never used; all nonblocking connect now goes through
socket_connect(), which calls inet_connect_addr().
Cc: Daniel P. Berrange <berrange@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Message-Id: <1469097213-26441-2-git-send-email-caoj.fnst@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 74b6ce43e3 uses the wrong free API for a SocketAddress, that
may leak some linked data.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20160706164246.22116-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rather than rolling our own clone via an expensive conversion
in and back out of QObject, use the new clone visitor.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-15-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Making each output visitor provide its own output collection
function was the only remaining reason for exposing visitor
sub-types to the rest of the code base. Add a polymorphic
visit_complete() function which is a no-op for input visitors,
and which populates an opaque pointer for output visitors. For
maximum type-safety, also add a parameter to the output visitor
constructors with a type-correct version of the output pointer,
and assert that the two uses match.
This approach was considered superior to either passing the
output parameter only during construction (action at a distance
during visit_free() feels awkward) or only during visit_complete()
(defeating type safety makes it easier to use incorrectly).
Most callers were function-local, and therefore a mechanical
conversion; the testsuite was a bit trickier, but the previous
cleanup patch minimized the churn here.
The visit_complete() function may be called at most once; doing
so lets us use transfer semantics rather than duplication or
ref-count semantics to get the just-built output back to the
caller, even though it means our behavior is not idempotent.
Generated code is simplified as follows for events:
|@@ -26,7 +26,7 @@ void qapi_event_send_acpi_device_ost(ACP
| QDict *qmp;
| Error *err = NULL;
| QMPEventFuncEmit emit;
|- QmpOutputVisitor *qov;
|+ QObject *obj;
| Visitor *v;
| q_obj_ACPI_DEVICE_OST_arg param = {
| info
|@@ -39,8 +39,7 @@ void qapi_event_send_acpi_device_ost(ACP
|
| qmp = qmp_event_build_dict("ACPI_DEVICE_OST");
|
|- qov = qmp_output_visitor_new();
|- v = qmp_output_get_visitor(qov);
|+ v = qmp_output_visitor_new(&obj);
|
| visit_start_struct(v, "ACPI_DEVICE_OST", NULL, 0, &err);
| if (err) {
|@@ -55,7 +54,8 @@ void qapi_event_send_acpi_device_ost(ACP
| goto out;
| }
|
|- qdict_put_obj(qmp, "data", qmp_output_get_qobject(qov));
|+ visit_complete(v, &obj);
|+ qdict_put_obj(qmp, "data", obj);
| emit(QAPI_EVENT_ACPI_DEVICE_OST, qmp, &err);
and for commands:
| {
| Error *err = NULL;
|- QmpOutputVisitor *qov = qmp_output_visitor_new();
| Visitor *v;
|
|- v = qmp_output_get_visitor(qov);
|+ v = qmp_output_visitor_new(ret_out);
| visit_type_AddfdInfo(v, "unused", &ret_in, &err);
|- if (err) {
|- goto out;
|+ if (!err) {
|+ visit_complete(v, ret_out);
| }
|- *ret_out = qmp_output_get_qobject(qov);
|-
|-out:
| error_propagate(errp, err);
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-13-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now that we have a polymorphic visit_free(), we no longer need
qmp_output_visitor_cleanup(); however, we still need to
expose the subtype for qmp_output_get_qobject().
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-10-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now that we have a polymorphic visit_free(), we no longer need
qmp_input_visitor_cleanup(); which in turn means we no longer
need to return a subtype from qmp_input_visitor_new() nor a
public upcast function.
Generated code changes to qmp-marshal.c look like:
|@@ -52,11 +52,10 @@ void qmp_marshal_add_fd(QDict *args, QOb
| {
| Error *err = NULL;
| AddfdInfo *retval;
|- QmpInputVisitor *qiv = qmp_input_visitor_new(QOBJECT(args), true);
| Visitor *v;
| q_obj_add_fd_arg arg = {0};
|
|- v = qmp_input_get_visitor(qiv);
|+ v = qmp_input_visitor_new(QOBJECT(args), true);
| visit_start_struct(v, NULL, NULL, 0, &err);
| if (err) {
| goto out;
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-8-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
qemu leaves unix socket files behind when removing a listening chardev
or leaving. qemu could clean that up, even if doing so isn't race-free.
Fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=1347077
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1466105332-10285-4-git-send-email-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use socket_*() functions from include/qemu/sockets.h instead of
listen()/bind()/connect()/parse_host_port(). socket_*() fucntions are
QAPI based and this patch performs this api conversion since
everything will be using QAPI based sockets in the future. Also add a
helper function socket_address_to_string() in util/qemu-sockets.c
which returns the string representation of socket address. Thetask was
listed on http://wiki.qemu.org/BiteSizedTasks page.
Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The following uses of a QMP input visitor should be strict
(that is, excess keys in QDict input should be flagged if not
converted to QAPI):
- Testsuite code unrelated to explicitly testing non-strict
mode (test-qmp-commands, test-visitor-serialization); since
we want more code to be strict by default, having more tests
of strict mode doesn't hurt
- Code used for cloning QAPI objects (replay-input.c,
qemu-sockets.c); we are reparsing a QObject just barely
produced by the qmp output visitor and which therefore should
not have any garbage, so while it is extra work to be strict,
it validates that our clone is correct [note that a later patch
series will simplify these two uses by creating an actual
clone visitor that is much more efficient than a
generate/reparse cycle]
- qmp_object_add(), which calls into user_creatable_add_type().
Since command line parsing for '-object' uses the same
user_creatable_add_type() through the OptsVisitor, and that is
always strict, we want to ensure that any nested dictionaries
would be treated the same in QMP and from the command line (I
don't actually know if such nested dictionaries exist). Note
that on this code change, strictness only matters for nested
dictionaries (if even possible), since we already flag excess
input at the top level during an earlier object_property_set()
on an unknown key, whether from QemuOpts:
$ ./x86_64-softmmu/qemu-system-x86_64 -nographic -nodefaults -qmp stdio -object secret,id=sec0,data=letmein,format=raw,foo=bar
qemu-system-x86_64: -object secret,id=sec0,data=letmein,format=raw,foo=bar: Property '.foo' not found
or from QMP:
$ ./x86_64-softmmu/qemu-system-x86_64 -nographic -nodefaults -qmp stdio
{"QMP": {"version": {"qemu": {"micro": 93, "minor": 5, "major": 2}, "package": ""}, "capabilities": []}}
{"execute":"qmp_capabilities"}
{"return": {}}
{"execute":"object-add","arguments":{"qom-type":"secret","id":"sec0","props":{"format":"raw","data":"letmein","foo":"bar"}}}
{"error": {"class": "GenericError", "desc": "Property '.foo' not found"}}
The only remaining uses of non-strict input visits are:
- QMP 'qom-set' (which eventually executes
object_property_set_qobject()) - mark it as something to revisit
in the future (I didn't want to spend any more time on this patch
auditing if we have any QOM dictionary properties that might be
impacted, and couldn't easily prove whether this code path is
shared with anything else).
- test-qmp-input-visitor: explicit tests of non-strict mode. If
we later get rid of users that don't need strictness, then this
test should be merged with test-qmp-input-strict
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1461879932-9020-7-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Rather than having two separate ways to create a QMP input
visitor, where the safer approach has the more verbose name,
it is better to consolidate things into a single function
where the caller must explicitly choose whether to be strict
or to ignore excess input. This patch is the strictly
mechanical conversion; the next patch will then audit which
uses can be made stricter.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1461879932-9020-6-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The FreeBSD header files define the AI_V4MAPPED but its
implementation of getaddrinfo() always returns an error
when that flag is set. eg
address resolution failed for localhost:9000: Invalid value for ai_flags
There are also reports of the same problem on OS-X 10.6
Since AI_V4MAPPED is not critical functionality, if we
get an EAI_BADFLAGS error then just retry without the
AI_V4MAPPED flag set. Use a static var to cache this
status so we don't have to retry on every single call.
Also remove its use from the test suite since it serves
no useful purpose there.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1459786920-15961-1-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move declarations out of qemu-common.h for functions declared in
utils/ files: e.g. include/qemu/path.h for utils/path.c.
Move inline functions out of qemu-common.h and into new files (e.g.
include/qemu/bcd.h)
Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Simple unions were carrying a special case that hid their 'data'
QMP member from the resulting C struct, via the hack method
QAPISchemaObjectTypeVariant.simple_union_type(). But by using
the work we started by unboxing flat union and alternate
branches, coupled with the ability to visit the members of an
implicit type, we can now expose the simple union's implicit
type in qapi-types.h:
| struct q_obj_ImageInfoSpecificQCow2_wrapper {
| ImageInfoSpecificQCow2 *data;
| };
|
| struct q_obj_ImageInfoSpecificVmdk_wrapper {
| ImageInfoSpecificVmdk *data;
| };
...
| struct ImageInfoSpecific {
| ImageInfoSpecificKind type;
| union { /* union tag is @type */
| void *data;
|- ImageInfoSpecificQCow2 *qcow2;
|- ImageInfoSpecificVmdk *vmdk;
|+ q_obj_ImageInfoSpecificQCow2_wrapper qcow2;
|+ q_obj_ImageInfoSpecificVmdk_wrapper vmdk;
| } u;
| };
Doing this removes asymmetry between QAPI's QMP side and its
C side (both sides now expose 'data'), and means that the
treatment of a simple union as sugar for a flat union is now
equivalent in both languages (previously the two approaches used
a different layer of dereferencing, where the simple union could
be converted to a flat union with equivalent C layout but
different {} on the wire, or to an equivalent QMP wire form
but with different C representation). Using the implicit type
also lets us get rid of the simple_union_type() hack.
Of course, now all clients of simple unions have to adjust from
using su->u.member to using su->u.member.data; while this touches
a number of files in the tree, some earlier cleanup patches
helped minimize the change to the initialization of a temporary
variable rather than every single member access. The generated
qapi-visit.c code is also affected by the layout change:
|@@ -7393,10 +7393,10 @@ void visit_type_ImageInfoSpecific_member
| }
| switch (obj->type) {
| case IMAGE_INFO_SPECIFIC_KIND_QCOW2:
|- visit_type_ImageInfoSpecificQCow2(v, "data", &obj->u.qcow2, &err);
|+ visit_type_q_obj_ImageInfoSpecificQCow2_wrapper_members(v, &obj->u.qcow2, &err);
| break;
| case IMAGE_INFO_SPECIFIC_KIND_VMDK:
|- visit_type_ImageInfoSpecificVmdk(v, "data", &obj->u.vmdk, &err);
|+ visit_type_q_obj_ImageInfoSpecificVmdk_wrapper_members(v, &obj->u.vmdk, &err);
| break;
| default:
| abort();
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1458254921-17042-13-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now that QEMU wraps the Win32 sockets methods to automatically
set errno upon failure, there is no reason for callers to use
the socket_error() method. They can rely on accessing errno
even on Win32. Remove all use of socket_error() from general
code, leaving it as a static method in oslib-win32.c only.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
An upcoming patch will alter how simple unions, like SocketAddress,
are laid out, which will impact all lines of the form 'addr->u.XXX'
(expanding it to the longer 'addr->u.XXX.data'). For better
legibility in that patch, and less need for line wrapping, it's better
to use a temporary variable to reduce the effect of a layout change to
just the variable initializations, rather than every reference within
a SocketAddress. Also, take advantage of some C99 initialization where
it makes sense (simplifying g_new0() to g_new()).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1457021813-10704-7-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Just go always through the err label. (Noticed because Coverity
complains that peer is always non-NULL in the error cleanup code,
but removing the "if" is arguably more prone to introducing the
opposite bug in the future).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
JSON uses "name":value, but many of our visitor interfaces were
called with visit_type_FOO(v, &value, name, errp). This can be
a bit confusing to have to mentally swap the parameter order to
match JSON order. It's particularly bad for visit_start_struct(),
where the 'name' parameter is smack in the middle of the
otherwise-related group of 'obj, kind, size' parameters! It's
time to do a global swap of the parameter ordering, so that the
'name' parameter is always immediately after the Visitor argument.
Additional reason in favor of the swap: the existing include/qjson.h
prefers listing 'name' first in json_prop_*(), and I have plans to
unify that file with the qapi visitors; listing 'name' first in
qapi will minimize churn to the (admittedly few) qjson.h clients.
Later patches will then fix docs, object.h, visitor-impl.h, and
those clients to match.
Done by first patching scripts/qapi*.py by hand to make generated
files do what I want, then by running the following Coccinelle
script to affect the rest of the code base:
$ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'`
I then had to apply some touchups (Coccinelle insisted on TAB
indentation in visitor.h, and botched the signature of
visit_type_enum() by rewriting 'const char *const strings[]' to
the syntactically invalid 'const char*const[] strings'). The
movement of parameters is sufficient to provoke compiler errors
if any callers were missed.
// Part 1: Swap declaration order
@@
type TV, TErr, TObj, T1, T2;
identifier OBJ, ARG1, ARG2;
@@
void visit_start_struct
-(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp)
{ ... }
@@
type bool, TV, T1;
identifier ARG1;
@@
bool visit_optional
-(TV v, T1 ARG1, const char *name)
+(TV v, const char *name, T1 ARG1)
{ ... }
@@
type TV, TErr, TObj, T1;
identifier OBJ, ARG1;
@@
void visit_get_next_type
-(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp)
{ ... }
@@
type TV, TErr, TObj, T1, T2;
identifier OBJ, ARG1, ARG2;
@@
void visit_type_enum
-(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp)
{ ... }
@@
type TV, TErr, TObj;
identifier OBJ;
identifier VISIT_TYPE =~ "^visit_type_";
@@
void VISIT_TYPE
-(TV v, TObj OBJ, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, TErr errp)
{ ... }
// Part 2: swap caller order
@@
expression V, NAME, OBJ, ARG1, ARG2, ERR;
identifier VISIT_TYPE =~ "^visit_type_";
@@
(
-visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR)
+visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR)
|
-visit_optional(V, ARG1, NAME)
+visit_optional(V, NAME, ARG1)
|
-visit_get_next_type(V, OBJ, ARG1, NAME, ERR)
+visit_get_next_type(V, NAME, OBJ, ARG1, ERR)
|
-visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR)
+visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR)
|
-VISIT_TYPE(V, OBJ, NAME, ERR)
+VISIT_TYPE(V, NAME, OBJ, ERR)
)
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-6-git-send-email-peter.maydell@linaro.org
The socket_dgram method accepts a QAPI SocketAddress object
which it then turns into QemuOpts before calling the
inet_dgram_opts helper method. By converting the latter to
use QAPI SocketAddress directly, the QemuOpts conversion
step can be eliminated.
This removes the very last use of QemuOpts from the
sockets code, so the socket_optslist[] array is also
removed.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1452518225-11751-5-git-send-email-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The socket_connect method accepts a QAPI SocketAddress object
which it then turns into QemuOpts before calling the
inet_connect_opts/unix_connect_opts helper methods. By
converting the latter to use QAPI SocketAddress directly,
the QemuOpts conversion step can be eliminated
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1452518225-11751-4-git-send-email-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The socket_listen method accepts a QAPI SocketAddress object
which it then turns into QemuOpts before calling the
inet_listen_opts/unix_listen_opts helper methods. By
converting the latter to use QAPI SocketAddress directly,
the QemuOpts conversion step can be eliminated
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1452518225-11751-3-git-send-email-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There are no callers of the sockets methods which accept
QemuOpts any more. Make all the QemuOpts related functions
static to avoid new callers being added, in preparation
for removal of all QemuOpts usage, in favour of QAPI
SocketAddress.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1452518225-11751-2-git-send-email-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Implement a QIOChannel subclass that supports sockets I/O.
The implementation is able to manage a single socket file
descriptor, whether a TCP/UNIX listener, TCP/UNIX connection,
or a UDP datagram. It provides APIs which can listen and
connect either asynchronously or synchronously. Since there
is no asynchronous DNS lookup API available, it uses the
QIOTask helper for spawning a background thread to ensure
non-blocking operation.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Using access() is a time-of-check/time-of-use race condition. It is
okay to use them to provide better error messages, but that is pretty
much it.
This is not one such case; on the other hand, access() *will* skip
unlink() for a non-existent path, so ignore ENOENT return values from
the unlink() system call.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
