There are no generic bits remaining in the handling of KVM_EXIT_DEBUG.
So push its logic completely into arch hands, i.e. only x86 so far.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Make the return code of kvm_arch_handle_exit directly usable for
kvm_cpu_exec. This is straightforward for x86 and ppc, just s390
would require more work. Avoid this for now by pushing the return code
translation logic into s390's kvm_arch_handle_exit.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
CC: Alexander Graf <agraf@suse.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Let kvm_cpu_exec return EXCP_* values consistently and generate those
codes already inside its inner loop. This means we will now re-enter the
kernel while ret == 0.
Update kvm_handle_internal_error accordingly, but keep
kvm_arch_handle_exit untouched, it will be converted in a separate step.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Test for general errors first as this is the slower path.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Avoid using 'ret' both for the return value of KVM_RUN as well as the
code kvm_cpu_exec is supposed to return. Both have no direct relation.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Without KVM_CAP_SET_GUEST_DEBUG, we neither motivate the kernel to
report KVM_EXIT_DEBUG nor do we expect such exits. So fall through to
the arch code which will simply report an unknown exit reason.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This avoids that early cpu_synchronize_state calls try to retrieve an
uninitialized state from the kernel. That even causes a deadlock if
io-thread is enabled.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
We will broaden the scope of this function on x86 beyond irqchip events.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Original fix by David Gibson.
CC: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
KVM-assisted devices need access to it but we have no clean channel to
distribute a reference. As a workaround until there is a better
solution, export kvm_state for global use, though use should remain
restricted to the mentioned scenario.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
In order to use log_start/log_stop with Xen as well in the vga code,
this two operations have been put in CPUPhysMemoryClient.
The two new functions cpu_physical_log_start,cpu_physical_log_stop are
used in hw/vga.c and replace the kvm_log_start/stop. With this, vga does
no longer depends on kvm header.
[ Jan: rebasing and style fixlets ]
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The number of slots and the location of private ones changed several
times in KVM's early days. However, it's stable since 2.6.29 (our
required baseline), and slots 8..11 are no longer reserved since then.
So remove this unneeded restriction.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
CC: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Mixing up TCG bits with KVM already led to problems around eflags
emulation on x86. Moreover, quite some code that TCG requires on cpu
enty/exit is useless for KVM. So dispatch between tcg_cpu_exec and
kvm_cpu_exec as early as possible.
The core logic of cpu_halted from cpu_exec is added to
kvm_arch_process_irqchip_events. Moving away from cpu_exec makes
exception_index meaningless for KVM, we can simply pass the exit reason
directly (only "EXCP_DEBUG vs. rest" is relevant).
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Define and use dedicated constants for vm_stop reasons, they actually
have nothing to do with the EXCP_* defines used so far. At this chance,
specify more detailed reasons so that VM state change handlers can
evaluate them.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The reset we issue on KVM_EXIT_SHUTDOWN implies that we should also
leave the VCPU loop. As we now check for exit_request which is set by
qemu_system_reset_request, this bug is no longer critical. Still it's an
unneeded extra turn.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Improve the readability of the exit dispatcher by moving the static
return value of kvm_handle_io to its caller.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
KVM requires to reenter the kernel after IO exits in order to complete
instruction emulation. Failing to do so will leave the kernel state
inconsistently behind. To ensure that we will get back ASAP, we issue a
self-signal that will cause KVM_RUN to return once the pending
operations are completed.
We can move kvm_arch_process_irqchip_events out of the inner VCPU loop.
The only state that mattered at its old place was a pending INIT
request. Catch it in kvm_arch_pre_run and also trigger a self-signal to
process the request on next kvm_cpu_exec.
This patch also fixes the missing exit_request check in kvm_cpu_exec in
the CONFIG_IOTHREAD case.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
CC: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Provide arch-independent kvm_on_sigbus* stubs to remove the #ifdef'ery
from cpus.c. This patch also fixes --disable-kvm build by providing the
missing kvm_on_sigbus_vcpu kvm-stub.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
It is not possible to use virtio-ioeventfd when building without an I/O
thread. We rely on a signal to kick us out of vcpu execution. Timers
and AIO use SIGALRM and SIGUSR2 respectively. Unfortunately eventfd
does not support O_ASYNC (SIGIO) so eventfd cannot be used in a signal
driven manner.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We must flush pending mmio writes if we leave kvm_cpu_exec for an IO
window. Otherwise we risk to loose those requests when migrating to a
different host during that window.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Instead of splattering the code with #ifdefs and runtime checks for
capabilities we cannot work without anyway, provide central test
infrastructure for verifying their availability both at build and
runtime.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Introduce the cpu_dump_state flag CPU_DUMP_CODE and implement it for
x86. This writes out the code bytes around the current instruction
pointer. Make use of this feature in KVM to help debugging fatal vm
exits.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Report KVM_EXIT_UNKNOWN, KVM_EXIT_FAIL_ENTRY, and KVM_EXIT_EXCEPTION
with more details to stderr. The latter two are so far x86-only, so move
them into the arch-specific handler. Integrate the Intel real mode
warning on KVM_EXIT_FAIL_ENTRY that qemu-kvm carries, but actually
restrict it to Intel CPUs. Moreover, always dump the CPU state in case
we fail.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Ensure that we stop the guest whenever we face a fatal or unknown exit
reason. If we stop, we also have to enforce a cpu loop exit.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
simple cleanup and use existing helper: kvm_check_extension().
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
There used to be a limit of 6 KVM io bus devices in the kernel.
On such a kernel, we can't use many ioeventfds for host notification
since the limit is reached too easily.
Add an API to test for this condition.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This makes ram block ordering under migration stable, ordered by offset.
This is especially useful for migration to exec, for debugging.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Jason Wang <jasowang@redhat.com>
In QEMU-KVM, physical address != RAM address. While MCE simulation
needs physical address instead of RAM address. So
kvm_physical_memory_addr_from_ram() is implemented to do the
conversion, and it is invoked before being filled in the IA32_MCi_ADDR
MSR.
Reported-by: Dean Nelson <dnelson@redhat.com>
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
vl.c has a Sun-specific hack to supply a prototype for madvise(),
but the call site has apparently moved to arch_init.c.
Haiku doesn't implement madvise() in favor of posix_madvise().
OpenBSD and Solaris 10 don't implement posix_madvise() but madvise().
MinGW implements neither.
Check for madvise() and posix_madvise() in configure and supply qemu_madvise()
as wrapper. Prefer madvise() over posix_madvise() due to flag availability.
Convert all callers to use qemu_madvise() and QEMU_MADV_*.
Note that on Solaris the warning is fixed by moving the madvise() prototype,
not by qemu_madvise() itself. It helps with porting though, and it simplifies
most call sites.
v7 -> v8:
* Some versions of MinGW have no sys/mman.h header. Reported by Blue Swirl.
v6 -> v7:
* Adopt madvise() rather than posix_madvise() semantics for returning errors.
* Use EINVAL in place of ENOTSUP.
v5 -> v6:
* Replace two leftover instances of POSIX_MADV_NORMAL with QEMU_MADV_INVALID.
Spotted by Blue Swirl.
v4 -> v5:
* Introduce QEMU_MADV_INVALID, suggested by Alexander Graf.
Note that this relies on -1 not being a valid advice value.
v3 -> v4:
* Eliminate #ifdefs at qemu_advise() call sites. Requested by Blue Swirl.
This will currently break the check in kvm-all.c by calling madvise() with
a supported flag, which will not fail. Ideas/patches welcome.
v2 -> v3:
* Reuse the *_MADV_* defines for QEMU_MADV_*. Suggested by Alexander Graf.
* Add configure check for madvise(), too.
Add defines to Makefile, not QEMU_CFLAGS.
Convert all callers, untested. Suggested by Blue Swirl.
* Keep Solaris' madvise() prototype around. Pointed out by Alexander Graf.
* Display configure check results.
v1 -> v2:
* Don't rely on posix_madvise() availability, add qemu_madvise().
Suggested by Blue Swirl.
Signed-off-by: Andreas Färber <afaerber@opensolaris.org>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This abort() condition is easily triggerable by a guest if it configures
pci bar with unaligned address that overlaps main memory.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
If we've unregistered a memory area, we should avoid calling
qemu_get_ram_ptr() on the left over phys_offset cruft in the
slot array. Now that we support removing ramblocks, the
phys_offset ram_addr_t can go away and cause a lookup fault
and abort.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Guest debugging is currently broken under CONFIG_IOTHREAD. The reason is
inconsistent or even lacking signaling the debug events from the source
VCPU to the main loop and the gdbstub.
This patch addresses the issue by pushing this signaling into a
CPUDebugExcpHandler: cpu_debug_handler is registered as first handler,
thus will be executed last after potential breakpoint emulation
handlers. It sets informs the gdbstub about the debug event source,
requests a debug exit of the main loop and stops the current VCPU. This
mechanism works both for TCG and KVM, with and without IO-thread.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Guest debugging under KVM is currently broken once io-threads are
enabled. Easily fixable by switching the fake on_vcpu to the real
run_on_cpu implementation.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Continue vcpu execution in case emulation failure happened while vcpu
was in userspace. In this case #UD will be injected into the guest
allowing guest OS to kill offending process and continue.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
It is not safe to retrieve the KVM internal state of a given cpu
while its potentially modifying it.
Queue the request to run on cpu context, similarly to qemu-kvm.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Zero cpu_single_env before leaving global lock protection, and
restore on return.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Port qemu-kvm's KVM_EXIT_INTERNAL_ERROR handling to upstream.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Make use of the new KVM_GET/SET_DEBUGREGS to save/restore the x86 debug
registers.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This allows limited use of kvm functions (which will return ENOSYS)
even in once-compiled modules. The patch also improves a bit the error
messages for KVM initialization.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[blauwirbel@gmail.com: fixed Win32 build]
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Fixes clang errors:
CC i386-softmmu/kvm.o
/src/qemu/target-i386/kvm.c:40:9: error: 'dprintf' macro redefined
In file included from /src/qemu/target-i386/kvm.c:21:
In file included from /src/qemu/qemu-common.h:27:
In file included from /usr/include/stdio.h:910:
/usr/include/bits/stdio2.h:189:12: note: previous definition is here
CC i386-softmmu/kvm-all.o
/src/qemu/kvm-all.c:39:9: error: 'dprintf' macro redefined
In file included from /src/qemu/kvm-all.c:23:
In file included from /src/qemu/qemu-common.h:27:
In file included from /usr/include/stdio.h:910:
/usr/include/bits/stdio2.h:189:12: note: previous definition is here
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The KVM kernel module on S390 refuses to create a VM when the switch_amode
kernel parameter is not used.
Since that is not exactly obvious, let's give the user a nice warning.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
