Commit Graph

24 Commits

Author SHA1 Message Date
Hannes Reinecke c9cf45c1a4 esp: Do not overwrite ESP_TCHI after reset
After a reset ESP_TCHI should contain the unique ID
of the chip. This value will be overwritten with the
current tranfer count if the transfer count has
previously been set.
So we should always return the chip id if ESP_TCHI
has never been written to.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-12 10:27:03 +01:00
Paolo Bonzini fb7b5c0df6 scsi: devirtualize unrealize of SCSI devices
All implementations are the same.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-31 11:29:02 +01:00
Hannes Reinecke 8d72db68fe megasas: Clear unit attention on initial reset
The EFI firmware doesn't handle unit attentions properly,
so we need to clear the Power On/Reset unit attention upon
initial reset.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-31 11:29:00 +01:00
Hannes Reinecke 1894df0281 scsi: Rename scsi_*_length() to scsi_*_xfer(), add scsi_cdb_length()
scsi_cdb_length() does not return the length of the cdb, but
the transfersize encoded in the cdb. So rename it to scsi_cdb_xfer()
and also rename all other related functions to end with _xfer.

We can then add a new scsi_cdb_length() which actually does return the
length of the cdb.  With that DEBUG_SCSI can now display the correct
CDB buffer.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-31 11:28:59 +01:00
Markus Armbruster 4be746345f hw: Convert from BlockDriverState to BlockBackend, mostly
Device models should access their block backends only through the
block-backend.h API.  Convert them, and drop direct includes of
inappropriate headers.

Just four uses of BlockDriverState are left:

* The Xen paravirtual block device backend (xen_disk.c) opens images
  itself when set up via xenbus, bypassing blockdev.c.  I figure it
  should go through qmp_blockdev_add() instead.

* Device model "usb-storage" prompts for keys.  No other device model
  does, and this one probably shouldn't do it, either.

* ide_issue_trim_cb() uses bdrv_aio_discard() instead of
  blk_aio_discard() because it fishes its backend out of a BlockAIOCB,
  which has only the BlockDriverState.

* PC87312State has an unused BlockDriverState[] member.

The next two commits take care of the latter two.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20 14:02:25 +02:00
Markus Armbruster 7c84b1b831 block: Rename BlockDriverAIOCB* to BlockAIOCB*
I'll use BlockDriverAIOCB with block backends shortly, and the name is
going to fit badly there.  It's a block layer thing anyway, not just a
block driver thing.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20 13:41:27 +02:00
Igor Mammedov 10bdcd5659 scsi: Cleanup not used anymore SCSIBusInfo{hotplug, hot_unplug} fields
SCSI subsytem was converted to hotplug handler API and
doesn't use SCSIBusInfo{hotplug, hot_unplug} fields and
related callbacks anymore.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-10-15 05:03:14 +02:00
Fam Zheng 8e0a9320e9 scsi: Introduce scsi_req_cancel_async
Devices will call this function to start an asynchronous cancellation. The
bus->info->cancel will be called after the request is canceled.

Devices will probably need to track a separate TMF request that triggers this
cancellation, and wait until the cancellation is done before completing it. So
we store a notifier list in SCSIRequest and in scsi_req_cancel_complete we
notify them.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-30 13:30:51 +02:00
Fam Zheng d5776465ee scsi: Introduce scsi_req_cancel_complete
Let the aio cb do the clean up and notification job after scsi_req_cancel, in
preparation for asynchronous cancellation.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-30 13:30:51 +02:00
Fam Zheng a83cfd12d9 scsi: Drop SCSIReqOps.cancel_io
The only two implementations are identical to each other, with nothing specific
to device: they only call bdrv_aio_cancel with the SCSIRequest.aiocb.

Let's move it to scsi-bus.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-30 13:30:51 +02:00
Fam Zheng eda470e41a scsi: Drop scsi_req_abort
The only user of this function is spapr_vscsi.c. We can convert to
scsi_req_cancel plus adding a check in vscsi_request_cancelled.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
[Drop prototype. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-30 13:30:50 +02:00
Fam Zheng 61e68b3fbd scsi: Optimize scsi_req_alloc
Zeroing sense buffer for each scsi request is not efficient, we can just
leave it uninitialized because sense_len is set to 0.

Move the implicitly zeroed fields to the end of the structure and use a
partial memset.

The explicitly initialized fields (by scsi_req_alloc or scsi_req_new)
are moved to the beginning of the structure, before sense buffer, to
skip the memset.

Also change g_malloc0 to g_slice_alloc.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-23 15:40:51 +02:00
Fam Zheng a818a4b69d scsi-bus: Convert DeviceClass init to realize
Replace "init/destroy" with "realize/unrealize" in SCSIDeviceClass,
which has errp as a parameter. So all the implementations now use
error_setg instead of error_report for reporting error.

Also in scsi_bus_legacy_handle_cmdline, report the error when
initializing the if=scsi devices, before returning it, because in the
callee, error_report is changed to error_setg. And the callers don't
have the right locations (e.g. "-drive if=scsi").

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-26 13:20:44 +02:00
Paolo Bonzini 3e7e180ab3 scsi-block, scsi-generic: implement parse_cdb
The callback lets the bus provide the direction and transfer count
for passthrough commands, enabling passthrough of vendor-specific
commands.

Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-29 17:36:33 +02:00
Paolo Bonzini ff34c32ccc scsi-bus: introduce parse_cdb in SCSIDeviceClass and SCSIBusInfo
These callbacks will let devices do their own request parsing, or
defer it to the bus.  If the bus does not provide an implementation,
in turn, fall back to the default parsing routine.

Swap the first two arguments to scsi_req_parse, and rename it to
scsi_req_parse_cdb, for consistency.

Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-29 17:36:25 +02:00
Fam Zheng 2e323f03bf scsi: Fix migration of scsi sense data
c5f52875 changed the size of sense array in vmstate_scsi_device by
mistake. This patch restores the old size, and add a subsection for the
remaining part of the buffer size. So that migration is not broken.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-03-14 10:06:55 +01:00
Paolo Bonzini 703dd81aca scsi: report thin provisioning errors with werror=report
SCSI defines a status code for when a thin-provisioned LUNs would
exceed the allocated space, map ENOSPC to it.

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-02-22 10:02:23 +01:00
Fam Zheng c5f52875b9 scsi: Change scsi sense buf size to 252
Current buffer size fails the assersion check in like

    hw/scsi/scsi-bus.c:1655:    assert(req->sense_len <= sizeof(req->sense));

when backend (block/iscsi.c) returns more data then 96.

Exercise the core dump path by booting an Gentoo ISO with scsi-generic
device backed with iscsi (built with libiscsi 1.7.0):

    x86_64-softmmu/qemu-system-x86_64 \
    -drive file=iscsi://localhost:3260/iqn.foobar/0,if=none,id=drive-disk \
    -device virtio-scsi-pci,id=scsi1,bus=pci.0,addr=0x6 \
    -device scsi-generic,drive=drive-disk,bus=scsi1.0,id=iscsi-disk \
    -boot d \
    -cdrom gentoo.iso

    qemu-system-x86_64: hw/scsi/scsi-bus.c:1655: scsi_req_complete:
    Assertion `req->sense_len <= sizeof(req->sense)' failed.

According to SPC-4, section 4.5.2.1, 252 is the limit of sense data. So
increase the value to fix it.

Also remove duplicated define for the macro.

Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-02-22 10:02:23 +01:00
Hans de Goede 9ec557bd53 scsi: Add 2 new sense codes needed by uas
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-11-26 09:21:17 +01:00
Asias He 846424350b scsi: Allocate SCSITargetReq r->buf dynamically [CVE-2013-4344]
r->buf is hardcoded to 2056 which is (256 + 1) * 8, allowing 256 luns at
most. If more than 256 luns are specified by user, we have buffer
overflow in scsi_target_emulate_report_luns.

To fix, we allocate the buffer dynamically.

Signed-off-by: Asias He <asias@redhat.com>
Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-10-09 17:24:18 +02:00
Andreas Färber b1187b51ff scsi: Pass size to scsi_bus_new()
To be passed to qbus_create_inplace().

Use DEVICE() casts instead of direct parent field access.

Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-08-30 20:14:39 +02:00
Andreas Färber caad4eb345 scsi: Improve error propagation for scsi_bus_legacy_handle_cmdline()
Let scsi_bus_legacy_add_drive() and scsi_bus_legacy_handle_cmdline()
return an Error**. Prepare qdev initfns for QOM realize error model.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23 00:37:35 +02:00
KONRAD Frederic 11fc853c4c scsi: add bus_name parameter to scsi_bus_new.
This adds the possibility to create a scsi-bus with a specified name.

Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1367330931-12994-4-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-03 12:05:15 -05:00
Paolo Bonzini 0d09e41a51 hw: move headers to include/
Many of these should be cleaned up with proper qdev-/QOM-ification.
Right now there are many catch-all headers in include/hw/ARCH depending
on cpu.h, and this makes it necessary to compile these files per-target.
However, fixing this does not belong in these patches.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:10 +02:00