If we write or modify the image file while the QEMU run state is
INMIGRATE, then the BDRV_O_INACTIVE BDS flag is set. This will cause
an assert, since the image is marked inactive. Make sure we obey this
flag.
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Message-id: 3996c930fa8cde8570b7a63032720d76a28fd78b.1510059970.git.jcody@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The VHDX specification requires that before user data modification of
the vhdx image, the VHDX header file and data GUIDs need to be updated.
In vhdx_open(), if the image is set to RDWR, we go ahead and update the
header.
However, just because the image is set to RDWR does not mean we can go
ahead and write at this point - specifically, if the QEMU run state is
INMIGRATE, the underlying file BS may be set to inactive via the BDS
open flag of BDRV_O_INACTIVE. Attempting to write under this condition
will cause an assert in bdrv_co_pwritev().
We can alternatively latch the first time the image is written. And lo
and behold, we do just that, via vhdx_user_visible_write() in
vhdx_co_writev(). This means the call to vhdx_update_headers() in
vhdx_open() is likely just vestigial, and can be removed.
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Message-id: 659e4cdba6ef4c651737852777c8c93d27b38040.1510059970.git.jcody@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Snapshot-switch actually changes active state of disk so it should
reflect on dirty bitmaps. Otherwise next incremental backup using
these bitmaps will be invalid.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20171023092945.54532-1-vsementsov@virtuozzo.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The crypto header is initialized only when QEMU is creating a new
image, so there's no chance of this happening on a corrupted image.
If QEMU is really trying to allocate the header overlapping other
existing metadata sections then this is a serious bug in QEMU itself
so let's add an assertion.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: ae3d77f312fc0c5e0ac2bbd71676c0112eebe2e5.1509718618.git.berto@igalia.com
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
qcow2_do_open() is checking that header.refcount_table_clusters is not
too large, but it doesn't check that it's greater than zero. Apart
from the fact that an image like that is obviously corrupted, trying
to use it crashes QEMU since we end up with a null s->refcount_table
after qcow2_refcount_init().
These images can however be repaired, so allow opening them if the
BDRV_O_CHECK flag is set.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: f9750f50c80359babba11062e88f5075a47e8e16.1509718618.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
If the refcount data is corrupted then we can end up trying to
allocate a new compressed cluster at offset 0 in the image, triggering
an assertion in qcow2_alloc_bytes() that would crash QEMU:
qcow2_alloc_bytes: Assertion `offset' failed.
This patch adds an explicit check for this scenario and a new test
case.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: fb53467cf48e95ff3330def1cf1003a5b862b7d9.1509718618.git.berto@igalia.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
If the refcount data is corrupted then we can end up trying to
allocate a new L2 table at offset 0 in the image, triggering an
assertion in the qcow2 cache that would crash QEMU:
qcow2_cache_entry_mark_dirty: Assertion `c->entries[i].offset != 0' failed
This patch adds an explicit check for this scenario and a new test
case.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 92dac37191ae7844a2da22c122204eb493cc3133.1509718618.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Each entry in the qcow2 cache contains an offset field indicating the
location of the data in the qcow2 image. If the offset is 0 then it
means that the entry contains no data and is available to be used when
needed.
Because of that it is not possible to store in the cache the first
cluster of the qcow2 image (offset = 0). This is not a problem because
that cluster always contains the qcow2 header and we're not using this
cache for that.
However, if the qcow2 image is corrupted it can happen that we try to
allocate a new refcount block at offset 0, triggering this assertion
and crashing QEMU:
qcow2_cache_entry_mark_dirty: Assertion `c->entries[i].offset != 0' failed
This patch adds an explicit check for this scenario and a new test
case.
This problem was originally reported here:
https://bugs.launchpad.net/qemu/+bug/1728615
Reported-by: R.Nageswara Sastry <nasastry@in.ibm.com>
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 92a2fadd10d58b423f269c1d1a309af161cdc73f.1509718618.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The following disk I/O throttling fixes solve recent bugs.
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJaCsdYAAoJEJykq7OBq3PIZdMH/10xOuxOjvjxlJNkQquhrAmD
y9dVj0jEtopdter/XR7ZCsww1UgxpIt8K43Dk1yWTKrm2bNN1v3cqemJV+UUTLFl
LppKxt5Cm1JRKaCfN0hSwOp5pFJumzH6creVdQMQ3VNCSSw6xfV94pupaVE8at6D
n4r3ZDF03ARETMJW7HY7QIFi1YVcfmi4wrx8rfhEGLZu06nHrtFQsDdH7SeErgXi
wJh+ksji4EvX2xc54nhprCsc9HdzbfeBEYx6tdD0Uh3xm7xXd2oka5Rac74WuqYu
B4aKwyFbvKZ0DYnENiOCkemTN51s+0GHLz43T92/DmQhJrBy8EU4TTCn73vgmto=
=KnUT
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
Pull request
The following disk I/O throttling fixes solve recent bugs.
# gpg: Signature made Tue 14 Nov 2017 10:37:12 GMT
# gpg: using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/block-pull-request:
qemu-iotests: Test I/O limits with removable media
block: Leave valid throttle timers when removing a BDS from a backend
block: Check for inserted BlockDriverState in blk_io_limits_disable()
throttle-groups: drain before detaching ThrottleState
block: all I/O should be completed before removing throttle timers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If a BlockBackend has I/O limits set then its ThrottleGroupMember
structure uses the AioContext from its attached BlockDriverState.
Those two contexts must be kept in sync manually. This is not
ideal and will be fixed in the future by removing the throttling
configuration from the BlockBackend and storing it in an implicit
filter node instead, but for now we have to live with this.
When you remove the BlockDriverState from the backend then the
throttle timers are destroyed. If a new BlockDriverState is later
inserted then they are created again using the new AioContext.
There are a couple of problems with this:
a) The code manipulates the timers directly, leaving the
ThrottleGroupMember.aio_context field in an inconsisent state.
b) If you remove the I/O limits (e.g by destroying the backend)
when the timers are gone then throttle_group_unregister_tgm()
will attempt to destroy them again, crashing QEMU.
While b) could be fixed easily by allowing the timers to be freed
twice, this would result in a situation in which we can no longer
guarantee that a valid ThrottleState has a valid AioContext and
timers.
This patch ensures that the timers and AioContext are always valid
when I/O limits are set, regardless of whether the BlockBackend has a
BlockDriverState inserted or not.
[Fixed "There'a" typo as suggested by Max Reitz <mreitz@redhat.com>
--Stefan]
Reported-by: sochin jiang <sochin.jiang@huawei.com>
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: e089c66e7c20289b046d782cea4373b765c5bc1d.1510339534.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When you set I/O limits using block_set_io_throttle or the command
line throttling.* options they are kept in the BlockBackend regardless
of whether a BlockDriverState is attached to the backend or not.
Therefore when removing the limits using blk_io_limits_disable() we
need to check if there's a BDS before attempting to drain it, else it
will crash QEMU. This can be reproduced very easily using HMP:
(qemu) drive_add 0 if=none,throttling.iops-total=5000
(qemu) drive_del none0
Reported-by: sochin jiang <sochin.jiang@huawei.com>
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 0d3a67ce8d948bb33e08672564714dcfb76a3d8c.1510339534.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
I/O requests hang after stop/cont commands at least since QEMU 2.10.0
with -drive iops=100:
(guest)$ dd if=/dev/zero of=/dev/vdb oflag=direct count=1000
(qemu) stop
(qemu) cont
...I/O is stuck...
This happens because blk_set_aio_context() detaches the ThrottleState
while requests may still be in flight:
if (tgm->throttle_state) {
throttle_group_detach_aio_context(tgm);
throttle_group_attach_aio_context(tgm, new_context);
}
This patch encloses the detach/attach calls in a drained region so no
I/O request is left hanging. Also add assertions so we don't make the
same mistake again in the future.
Reported-by: Yongxue Hong <yhong@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20171110151934.16883-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In blk_remove_bs, all I/O should be completed before removing throttle
timers. If there has inflight I/O, removing throttle timers here will
cause the inflight I/O never return.
This patch add bdrv_drained_begin before throttle_timers_detach_aio_context
to let all I/O completed before removing throttle timers.
[Moved declaration of bs as suggested by Alberto Garcia
<berto@igalia.com>.
--Stefan]
Signed-off-by: Zhengui <lizhengui@huawei.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 1508564040-120700-1-git-send-email-lizhengui@huawei.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Ensure that the server is not sending unexpected chunk lengths
for either the NONE or the OFFSET_DATA chunk, nor unexpected
hole length for OFFSET_HOLE. This will flag any server as
broken that responds to a zero-length read with an OFFSET_DATA
(what our server currently does, but that's about to be fixed)
or with OFFSET_HOLE, even though we previously fixed our client
to never be able to send such a request over the wire.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171108215703.9295-7-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
The NBD spec was recently clarified to state that clients should
not send 0-length requests to the server, as the server behavior
is undefined [1]. We know that qemu-nbd's behavior is a successful
no-op (once it has filtered for read-only exports), but other NBD
implementations might return an error. To avoid any questionable
server implementations, it is better to just short-circuit such
requests on the client side (we are relying on the block layer to
already filter out requests such as invalid offset, write to a
read-only volume, and so forth); do the short-circuit as late as
possible to still benefit from protections from assertions that
the block layer is not violating our assumptions.
[1] https://github.com/NetworkBlockDevice/nbd/commit/ee926037
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171108215703.9295-6-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
The NBD spec says that clients should not try to write/trim to
an export advertised as read-only by the server. But we failed
to check that, and would allow the block layer to use NBD with
BDRV_O_RDWR even when the server is read-only, which meant we
were depending on the server sending a proper EPERM failure for
various commands, and also exposes a leaky abstraction: using
qemu-io in read-write mode would succeed on 'w -z 0 0' because
of local short-circuiting logic, but 'w 0 0' would send a
request over the wire (where it then depends on the server, and
fails at least for qemu-nbd but might pass for other NBD
implementations).
With this patch, a client MUST request read-only mode to access
a server that is doing a read-only export, or else it will get
a message like:
can't open device nbd://localhost:10809/foo: request for write access conflicts with read-only export
It is no longer possible to even attempt writes over the wire
(including the corner case of 0-length writes), because the block
layer enforces the explicit read-only request; this matches the
behavior of qcow2 when backed by a read-only POSIX file.
Fix several iotests to comply with the new behavior (since
qemu-nbd of an internal snapshot, as well as nbd-server-add over QMP,
default to a read-only export, we must tell blockdev-add/qemu-io to
set up a read-only client).
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171108215703.9295-3-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Provide missing spaces that are required when using string
concatenation to break error messages across source lines.
Introduced in commit f140e300.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171108215703.9295-2-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Minimal implementation: for structured error only error_report error
message.
Note that test 83 is now more verbose, because the implementation
prints more warnings about unexpected communication errors; perhaps
future patches should tone things down by using trace messages
instead of traces, but the common case of successful communication
is no noisier than before.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171027104037.8319-13-eblake@redhat.com>
In following patch nbd_receive_reply will be used both for simple
and structured reply header receiving.
NBDReply is altered into union of simple reply header and structured
reply chunk header, simple error translation moved to block/nbd-client
to be consistent with further structured reply error translation.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171027104037.8319-11-eblake@redhat.com>
Some qcow2 functions (at least perform_cow()) expect s->lock to be
taken. Therefore, if we want to make use of them, we should execute
preallocate() (as "preallocate_co") in a coroutine so that we can use
the qemu_co_mutex_* functions.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171009215533.12530-3-mreitz@redhat.com
Cc: qemu-stable@nongnu.org
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
A qcow2 image file's length is not required to have a length that is a
multiple of the cluster size. However, qcow2_refcount_area() expects an
aligned value for its @start_offset parameter, so we need to round
@old_file_size up to the next cluster boundary.
Reported-by: Ping Li <pingl@redhat.com>
Bug: https://bugzilla.redhat.com/show_bug.cgi?id=1414049
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171009215533.12530-2-mreitz@redhat.com
Cc: qemu-stable@nongnu.org
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
bdrv_truncate() has an errp parameter which is always set when an error
occurs. Let's use that instead of a plain strerror().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171009155431.14093-1-mreitz@redhat.com
Reviewed-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
BDRV_SECTOR_BITS is defined to be 9 in block.h (and BDRV_SECTOR_SIZE
is calculated from that), but there are still a couple of places where
we are using the literal value instead of the macro.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 20171009153856.20387-1-berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Now that bdrv_is_allocated accepts non-aligned inputs, we can
remove the TODO added in earlier refactoring.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that bdrv_is_allocated accepts non-aligned inputs, we can
remove the TODO added in commit d6a644bb.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Any device that has request_alignment greater than 512 should be
unable to report status at a finer granularity; it may also be
simpler for such devices to be guaranteed that the block layer
has rounded things out to the granularity boundary (the way the
block layer already rounds all other I/O out). Besides, getting
the code correct for super-sector alignment also benefits us
for the fact that our public interface now has byte granularity,
even though none of our drivers have byte-level callbacks.
Add an assertion in blkdebug that proves that the block layer
never requests status of unaligned sections, similar to what it
does on other requests (while still keeping the generic helper
in place for when future patches add a throttle driver). Note
that iotest 177 already covers this (it would fail if you use
just the blkdebug.c hunk without the io.c changes). Meanwhile,
we can drop assertions in callers that no longer have to pass
in sector-aligned addresses.
There is a mid-function scope added for 'count' and 'longret',
for a couple of reasons: first, an upcoming patch will add an
'if' statement that checks whether a driver has an old- or
new-style callback, and can conveniently use the same scope for
less indentation churn at that time. Second, since we are
trying to get rid of sector-based computations, wrapping things
in a scope makes it easier to group and see what will be
deleted in a final cleanup patch once all drivers have been
converted to the new-style callback.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. In the common case, allocation is unlikely to ever use
values that are not naturally sector-aligned, but it is possible
that byte-based values will let us be more precise about allocation
at the end of an unaligned file that can do byte-based access.
Changing the name of the function from bdrv_get_block_status_above()
to bdrv_block_status_above() ensures that the compiler enforces that
all callers are updated. Likewise, since it a byte interface allows
an offset mapping that might not be sector aligned, split the mapping
out of the return value and into a pass-by-reference parameter. For
now, the io.c layer still assert()s that all uses are sector-aligned,
but that can be relaxed when a later patch implements byte-based
block status in the drivers.
For the most part this patch is just the addition of scaling at the
callers followed by inverse scaling at bdrv_block_status(), plus
updates for the new split return interface. But some code,
particularly bdrv_block_status(), gets a lot simpler because it no
longer has to mess with sectors. Likewise, mirror code no longer
computes s->granularity >> BDRV_SECTOR_BITS, and can therefore drop
an assertion about alignment because the loop no longer depends on
alignment (never mind that we don't really have a driver that
reports sub-sector alignments, so it's not really possible to test
the effect of sub-sector mirroring). Fix a neighboring assertion to
use is_power_of_2 while there.
For ease of review, bdrv_get_block_status() was tackled separately.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually converting to byte-based interfaces, as they are
easier to reason about than sector-based. Convert another internal
type (no semantic change), and rename it to match the corresponding
public function rename.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually converting to byte-based interfaces, as they are
easier to reason about than sector-based. Convert another internal
function (no semantic change).
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually converting to byte-based interfaces, as they are
easier to reason about than sector-based. Convert another internal
type (no semantic change), and rename it to match the corresponding
public function rename.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually converting to byte-based interfaces, as they are
easier to reason about than sector-based. Convert another internal
function (no semantic change); and as with its public counterpart,
rename to bdrv_co_block_status() and split the offset return, to
make the compiler enforce that we catch all uses. For now, we
assert that callers and the return value still use aligned data,
but ultimately, this will be the function where we hand off to a
byte-based driver callback, and will eventually need to add logic
to ensure we round calls according to the driver's
request_alignment then touch up the result handed back to the
caller, to start permitting a caller to pass unaligned offsets.
Note that we are now prepared to accepts 'bytes' larger than INT_MAX;
this is okay as long as we clamp things internally before violating
any 32-bit limits, and makes no difference to how a client will
use the information (clients looping over the entire file must
already be prepared for consecutive calls to return the same status,
as drivers are already free to return shorter-than-maximal status
due to any other convenient split points, such as when the L2 table
crosses cluster boundaries in qcow2).
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. In the common case, allocation is unlikely to ever use
values that are not naturally sector-aligned, but it is possible
that byte-based values will let us be more precise about allocation
at the end of an unaligned file that can do byte-based access.
Changing the name of the function from bdrv_get_block_status() to
bdrv_block_status() ensures that the compiler enforces that all
callers are updated. For now, the io.c layer still assert()s that
all callers are sector-aligned, but that can be relaxed when a later
patch implements byte-based block status in the drivers.
There was an inherent limitation in returning the offset via the
return value: we only have room for BDRV_BLOCK_OFFSET_MASK bits, which
means an offset can only be mapped for sector-aligned queries (or,
if we declare that non-aligned input is at the same relative position
modulo 512 of the answer), so the new interface also changes things to
return the offset via output through a parameter by reference rather
than mashed into the return value. We'll have some glue code that
munges between the two styles until we finish converting all uses.
For the most part this patch is just the addition of scaling at the
callers followed by inverse scaling at bdrv_block_status(), coupled
with the tweak in calling convention. But some code, particularly
bdrv_is_allocated(), gets a lot simpler because it no longer has to
mess with sectors.
For ease of review, bdrv_get_block_status_above() will be tackled
separately.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually converting to byte-based interfaces, as they are
easier to reason about than sector-based. Change the internal
loop iteration of zeroing a device to track by bytes instead of
sectors (although we are still guaranteed that we iterate by steps
that are sector-aligned).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually converting to byte-based interfaces, as they are
easier to reason about than sector-based. Convert another internal
function (no semantic change), and rename it to is_zero() in the
process.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In the process of converting sector-based interfaces to bytes,
I'm finding it easier to represent a byte count as a 64-bit
integer at the block layer (even if we are internally capped
by SIZE_MAX or even INT_MAX for individual transactions, it's
still nicer to not have to worry about truncation/overflow
issues on as many variables). Update the signature of
bdrv_round_to_clusters() to uniformly use int64_t, matching
the signature already chosen for bdrv_is_allocated and the
fact that off_t is also a signed type, then adjust clients
according to the required fallout (even where the result could
now exceed 32 bits, no client is directly assigning the result
into a 32-bit value without breaking things into a loop first).
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Not all callers care about which BDS owns the mapping for a given
range of the file, or where the zeroes lie within that mapping. In
particular, bdrv_is_allocated() cares more about finding the
largest run of allocated data from the guest perspective, whether
or not that data is consecutive from the host perspective, and
whether or not the data reads as zero. Therefore, doing subsequent
refinements such as checking how much of the format-layer
allocation also satisfies BDRV_BLOCK_ZERO at the protocol layer is
wasted work - in the best case, it just costs extra CPU cycles
during a single bdrv_is_allocated(), but in the worst case, it
results in a smaller *pnum, and forces callers to iterate through
more status probes when visiting the entire file for even more
extra CPU cycles.
This patch only optimizes the block layer (no behavior change when
want_zero is true, but skip unnecessary effort when it is false).
Then when subsequent patches tweak the driver callback to be
byte-based, we can also pass this hint through to the driver.
Tweak BdrvCoGetBlockStatusData to declare arguments in parameter
order, rather than mixing things up (minimizing padding is not
necessary here).
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Not all callers care about which BDS owns the mapping for a given
range of the file. This patch merely simplifies the callers by
consolidating the logic in the common call point, while guaranteeing
a non-NULL file to all the driver callbacks, for no semantic change.
The only caller that does not care about pnum is bdrv_is_allocated,
as invoked by vvfat; we can likewise add assertions that the rest
of the stack does not have to worry about a NULL pnum.
Furthermore, this will also set the stage for a future cleanup: when
a caller does not care about which BDS owns an offset, it would be
nice to allow the driver to optimize things to not have to return
BDRV_BLOCK_OFFSET_VALID in the first place. In the case of fragmented
allocation (for example, it's fairly easy to create a qcow2 image
where consecutive guest addresses are not at consecutive host
addresses), the current contract requires bdrv_get_block_status()
to clamp *pnum to the limit where host addresses are no longer
consecutive, but allowing a NULL file means that *pnum could be
set to the full length of known-allocated data.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
- Marc-André Lureau - NBD: use g_new() family of functions
- Vladimir Sementsov-Ogievskiy - first half of 00/13 nbd minimal structured read
-----BEGIN PGP SIGNATURE-----
Comment: Public key at http://people.redhat.com/eblake/eblake.gpg
iQEcBAABCAAGBQJZ4q4XAAoJEKeha0olJ0NqEooH/R8NKYACELA39xrLdEMUQuZY
1Lm3/OtpBIICKx7OiZ7LniqApAI++FgjNxOf6PAfNG0TmEA+wMFaZ6NJEdi9DAmv
kJVLsxiqKLDD+WIKMq5XfZQoFMJ8rV8W2/BYx9cF3Pl4KMT20qDsumsncZJ7DGOR
jjsbAI8Q6g45VBx6TJbxXiTMDj87nIyNaydAGzRQTmEHtnmh8mllPiuEhJu24l6G
7CQKfcu4/7Te/5PvJIPn7CxHdVjLYalgWDRkU3kXcwmO8vGQEkYoiHPoc8lGsGtw
oXJ2YIODYBIjeICkF0/PjT9aoeJQG8EuHR1hT0CW5dVBZz/DlVP/j+EZ6IDV/8k=
=ud0Z
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2017-10-14' into staging
nbd patches for 2017-10-14
- Marc-André Lureau - NBD: use g_new() family of functions
- Vladimir Sementsov-Ogievskiy - first half of 00/13 nbd minimal structured read
# gpg: Signature made Sun 15 Oct 2017 01:38:47 BST
# gpg: using RSA key 0xA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>"
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>"
# gpg: aka "[jpeg image of size 6874]"
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-nbd-2017-10-14:
nbd: header constants indenting
nbd/server: simplify reply transmission
nbd/server: refactor nbd_co_send_simple_reply parameters
nbd/server: do not use NBDReply structure
nbd/server: structurize simple reply header sending
nbd: rename some simple-request related objects to be _simple_
block/nbd-client: refactor nbd_co_receive_reply
block/nbd-client: assert qiov len once in nbd_co_request
NBD: use g_new() family of functions
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
BlockDriverState has a bdrv_co_drain() callback but no equivalent for
the end of the drain. The throttle driver (block/throttle.c) needs a way
to mark the end of the drain in order to toggle io_limits_disabled
correctly, thus bdrv_co_drain_end is needed.
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Pass handle parameter directly, as the whole request isn't needed.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171012095319.136610-3-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Also improve the assertion: check that qiov is NULL for other commands
than CMD_READ and CMD_WRITE.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171012095319.136610-2-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Change qemu_config_parse() to return the number of config groups
in success and -EINVAL on error. This will allow callers of
qemu_config_parse() to check if something was really loaded from
the config file.
All existing callers of qemu_config_parse() and
qemu_read_config_file() only check if the return value was
negative, so the change shouldn't affect them.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20171004025043.3788-2-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Backing may be zero after failed bdrv_append in mirror_start_job,
which leads to SIGSEGV.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20170929152255.5431-1-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Now after shrinking the image, at the end of the image file, there might be a
tail that probably will never be used. So we can find the last used cluster and
cut the tail.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170929121613.25997-3-pbutsykin@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170929121613.25997-2-pbutsykin@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Backing may be zero after failed bdrv_attach_child in
bdrv_set_backing_hd, which leads to SIGSEGV.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20170928120300.58164-1-vsementsov@virtuozzo.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The BDRV_REQ_FUA flag can trivially be allowed in the crypt driver
as a passthrough to the underlying block driver.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170927125340.12360-7-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Instead of sector offset, take the bytes offset when encrypting
or decrypting data.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170927125340.12360-6-berrange@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
