This patch changes the behavior in the relative mode to be compatible
with other UIs, namely, grabbing the input at the first left click.
It improves the usability a lot; otherwise you have to press ctl-alt-G
or select from menu at each time you want to move the pointer. Also,
the input grab is cleared when the current mode is switched to the
absolute mode.
The automatic reset of the implicit grabbing is needed since the
switching to the absolute mode happens always after the click even on
Gtk. That is, we cannot check whether the absolute mode is already
available at the first click time even though it should have been
switched in X11 input driver side.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It's pretty annoying that the pointer reappears at a random place once
after grabbing and ungrabbing the input. Better to restore to the
original position where the pointer was grabbed.
Reference: https://bugzilla.novell.com/show_bug.cgi?id=849587
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The relative pointer tracking mode was still buggy even after the
previous fix of the motion-notify-event since the events are filtered
out when the pointer moves outside the drawing window due to the
boundary check for the absolute mode.
This patch fixes the issue by moving the unnecessary boundary check
into the if block of absolute mode, and keep the coordinate in the
relative mode even if it's outside the drawing area. But this makes
the coordinate (last_x, last_y) possibly pointing to (-1,-1),
introduce a new flag to indicate the last coordinate has been
updated.
Reference: https://bugzilla.novell.com/show_bug.cgi?id=849587
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The GDK motion-notify-event isn't generated when the pointer goes out
of the target window even if the pointer is grabbed, which essentially
means to lose the pointer tracking in gtk-ui.
Meanwhile the generic "event" signal is sent when the pointer is
grabbed, so we can use this and pick the motion notify events manually
there instead.
Reference: https://bugzilla.novell.com/show_bug.cgi?id=849587
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
GTK without VTE is needed for hosts which don't support VTE (for example
all variants of MinGW), but it can also be reasonable for other hosts.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
This matches the behavior of SDL, and makes the mouse usable when
using -display gtk -vga qxl
https://bugzilla.redhat.com/show_bug.cgi?id=1051724
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We were using the wrong coordinates, this fixes things to match the
original gtk2 implementation.
You can see this error in action by using -vga qxl, however even after this
patch the mouse warps in small increments up and to the left, -7x and -3y
pixels at a time, until the pointer is warped off the widget. I think it's
a qxl bug, but the next patch covers it up.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
As long as we have no persistent GTK configuration, this allows to
enable the useful grab-on-hover feature already when starting the VM.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
[ kraxel: fix warning with CONFIG_GTK=n ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Hook into scroll-event to properly forward mouse wheel movements to the
guest, just like we already do in SDL.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
GTK uses different hardware keycodes on Windows hosts, so some special
handling is needed to get the QEMU keycode.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
These include files don't exist for MinGW and are not needed for Linux
(and hopefully for other hosts as well), so remove them.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
This is in fact very simply: When the input in grabbed, everything
should be exclusively passed to the guest - except it has our magic
CTRL-ALT modifier set. Then let GTK filter out those accels that are in
use. When checking the modifier state, we just need to filter out NUM
and CAPS lock.
Note: Filtering based on hard-coded modifiers breaks overriding
accelerators. Needs to be fixed at a later point.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Also use CAIRO_FORMAT_RGB24 unconditionally. DisplaySurfaces will never
ever see 8bpp surfaces. And using CAIRO_FORMAT_RGB16_565 for the 16bpp
case doesn't seem to be a good idea too.
<quote src="/usr/include/cairo/cairo.h">
* @CAIRO_FORMAT_RGB16_565: This format value is deprecated. It has
* never been properly implemented in cairo and should not be used
* by applications. (since 1.2)
</quote>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1372150134-8590-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
With GTK 3, the function gdk_cursor_unref is deprecated:
qemu/ui/gtk.c: In function ‘gd_cursor_define’:
qemu/ui/gtk.c:380:5: error:
‘gdk_cursor_unref’ is deprecated (declared at /usr/include/gtk-3.0/gdk/gdkcursor.h:233): Use 'g_object_unref' instead [-Werror=deprecated-declarations]
Fix the gcc compiler warning by using conditional compilation.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1371391987-10795-1-git-send-email-sw@weilnetz.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In two places qemu uses openpty() which is very system-dependent,
and in both places the pty is switched to raw mode as well.
Make a wrapper function which does both steps, and move all the
system-dependent complexity into a separate file, together
with static/local implementations of openpty() and cfmakeraw()
from qemu-char.c.
It is in a separate file, not part of oslib-posix.c, because
openpty() often resides in -lutil which is not linked to
every program qemu builds.
This change removes #including of <pty.h>, <termios.h>
and other rather specific system headers out of qemu-common.h,
which isn't a place for such specific headers really.
This version has been verified to build correctly on Linux,
OpenBSD, FreeBSD and OpenIndiana. On the latter it lets qemu
to be built with gtk gui which were not possible there due to
missing openpty() and cfmakeraw().
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Tested-by: Andreas Färber <andreas.faerber@web.de>
Aiming for GTK as replacement for SDL, a feature like -full-screen should also
be implemented.
Bringing the window into full-screen mode is done by activating the "Fullscreen"
menu item. This is done after showing the windows to make the cursor and menu
hidden.
v2: drop -no-frame implementation, use booleans instead of ints and ensure
consistency between ui state and menu.
Signed-off-by: Peter Wu <lekensteyn@gmail.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When CHR_EVENT_OPENED was initially added, it was CHR_EVENT_RESET,
and it was issued as a bottom-half:
86e94dea5b
Which we basically used to print out a greeting/prompt for the
monitor.
AFAICT the only reason this was ever done in a BH was because in
some cases we'd modify the chr_write handler for a new chardev
backend *after* the site where we issued the reset (see:
86e94d:qemu_chr_open_stdio())
At some point this event was renamed to CHR_EVENT_OPENED, and we've
maintained the use of this BH ever since.
However, due to 9f939df955, we schedule
the BH via g_idle_add(), which is causing events to sometimes be
delivered after we've already begun processing data from backends,
leading to:
known bugs:
QMP:
session negotation resets with OPENED event, in some cases this
is causing new sessions to get sporadically reset
potential bugs:
hw/usb/redirect.c:
can_read handler checks for dev->parser != NULL, which may be
true if CLOSED BH has not been executed yet. In the past, OPENED
quiesced outstanding CLOSED events prior to us reading client
data. If it's delayed, our check may allow reads to occur even
though we haven't processed the OPENED event yet, and when we
do finally get the OPENED event, our state may get reset.
qtest.c:
can begin session before OPENED event is processed, leading to
a spurious reset of the system and irq_levels
gdbstub.c:
may start a gdb session prior to the machine being paused
To fix these, let's just drop the BH.
Since the initial reasoning for using it still applies to an extent,
work around that by deferring the delivery of CHR_EVENT_OPENED until
after the chardevs have been fully initialized, toward the end of
qmp_chardev_add() (or some cases, qemu_chr_new_from_opts()). This
defers delivery long enough that we can be assured a CharDriverState
is fully initialized before CHR_EVENT_OPENED is sent.
Also, rather than requiring each chardev to do an explicit open, do it
automatically, and allow the small few who don't desire such behavior to
suppress the OPENED-on-init behavior by setting a 'explicit_be_open'
flag.
We additionally add missing OPENED events for stdio backends on w32,
which were previously not being issued, causing us to not recieve the
banner and initial prompts for qmp/hmp.
Reported-by: Stefan Priebe <s.priebe@profihost.ag>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Message-id: 1370636393-21044-1-git-send-email-mdroth@linux.vnet.ibm.com
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The current icon looks pretty terrible rendered in Gnome. This
switches to a transparent SVG which looks much nicer.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It's not a GObject.
Cc: Gerd Hoffman <kraxel@redhat.com>
Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
---
v1 -> v2
- Fix summary to agree with code (Peter)
This should fix building the GTK+ front-end on BSDs.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1368533121-30796-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit 9697f5d2d3 "gtk: custom cursor support"
introduced unconditional usage of gdk_display_warp_pointer(). This function
is marked as deprecated since GTK-3.0, and triggers warning (error with -Werror)
during compilation.
Conditionally change gdk_display_warp_pointer() method usage to gdk_device_warp
usage, as suggested by compiler.
Signed-off-by: Igor Mitsyanko <i.mitsyanko@gmail.com>
Message-id: 1368197985-44608-1-git-send-email-i.mitsyanko@gmail.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
DisplayChangeListener gets a new QemuConsole field, which can be set to
non-NULL before registering. This will pin the QemuConsole, so that
particular DisplayChangeListener will not follow console switches.
spice+gtk (which don't support text console input anyway) are switched
over to be pinned to console 0, which usually is the graphical display.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add QemuConsole parameter to vga_hw_*, so the interface allows to update
non-active consoles (the actual code can't handle this yet, see next
patch). Passing NULL is allowed and updates the active console, like
the functions do today.
While touching all vga_hw_* calls anyway rename that to the functions to
hardware-neutral graphics_hw_*
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The QEMU icon which is already used for SDL
is now also loaded by GTK.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1364653300-26813-1-git-send-email-sw@weilnetz.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
To better reflect that it is for handling a backend being opened.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Message-id: 1364292483-16564-3-git-send-email-hdegoede@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This solves, e.g., sticky ALT when selecting a GTK menu, switching to a
different window or selecting a different virtual console.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Message-id: 514F417A.6010908@web.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Now that nobody depends on DisplayState in DisplayChangeListener
callbacks any more we can remove the parameter from all callbacks.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Rework DisplayStateListener callbacks to not use the DisplayState
any more. Factor out the window size handling to a separate function,
so the zoom callbacks can call that directly instead of abusing the
gd_switch DisplayStateListener callback for that.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Replace the dpy_gfx_resize and dpy_gfx_setdata DisplayChangeListener
callbacks with a dpy_gfx_switch callback which notifies the ui code
when the framebuffer backing storage changes.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It's broken by design. There can be multiple DisplayChangeListener
instances, so they simply can't store state in the (single) DisplayState
struct. Try 'qemu -display gtk -vnc :0', watch it crash & burn.
With DisplayChangeListenerOps having a more sane interface now we can
simply use the DisplayChangeListener pointer to get access to our
private data instead.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Split callbacks into separate Ops struct. Pass DisplayChangeListener
pointer as first argument to all callbacks. Uninline a bunch of
display functions and move them from console.h to console.c
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds 'vc' support to qapi and also switches over the
vc chardev initialization to the new qapi code path.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The GDK_KEY_XXX symbols are new in GTK3 and only the most
recent GTK2 releases. Most versions of GTK2 have simply
used GDK_XXX
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1361805646-6425-14-git-send-email-berrange@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The gtk_widget_get_realized method only arrived in GTK 2.20,
so defined a compat macro for earlier GTK
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1361805646-6425-13-git-send-email-berrange@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In GTK3 the 'expose-event' signal has been replaced by a new
'draw' signal. The only difference is that the latter will
pre-create the cairo drawing context & set the clip mask.
Since the drawing code is already structured in a nice way,
we can just wire up the 'gd_draw_event' method to the 'draw'
signal in GTK3
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1361805646-6425-10-git-send-email-berrange@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The gtk_widget_size_request method has been replaced by
the gtk_widget_get_preferred_size method in GTK3. Conditionally
call the new method in GTK3
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1361805646-6425-9-git-send-email-berrange@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In GTK3 the gdk_display_warp_pointer method is deprecated.
Instead we should use gdk_device_warp on the GdkDevice
instead associated with the event being processed.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1361805646-6425-8-git-send-email-berrange@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The gtk_menu_append method has long been deprecated in favour
of the gtk_menu_shell_append method. The former is now entirely
gone in GTK3, so switch all code to the latter which works on
both GTK2 and GTK3
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1361805646-6425-7-git-send-email-berrange@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The GtkVBox class is deprecated, in favour of just using the
GtkBox class directly. Eventually even GtkBox will be
deprecated in favour of GtkGrid, but that is a bigger fix
which can wait.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1361805646-6425-6-git-send-email-berrange@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
