common.rc has some complicated logic to find the common.config that
dates back to xfstests and is completely unnecessary now. Just include
the contents of the file.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220505094723.732116-1-pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Drop the use of OUTPUT_DIR (test/qemu-iotests under the build
directory), and instead write test output files (.out.bad, .notrun, and
.casenotrun) to TEST_DIR.
With this, the same test can be run concurrently without the separate
instances interfering, because they will need separate TEST_DIRs anyway.
Running the same test separately is useful when running the iotests with
various format/protocol combinations in parallel, or when you just want
to aggressively exercise a single test (e.g. when it fails only
sporadically).
Putting this output into TEST_DIR means that it will stick around for
inspection after the test run is done (though running the same test in
the same TEST_DIR will overwrite it, just as it used to be); but given
that TEST_DIR is a scratch directory, it should be clear that users can
delete all of its content at any point. (And if TEST_DIR is on tmpfs,
it will just disappear on shutdown.) Contrarily, alternative approaches
that would put these output files into OUTPUT_DIR with some prefix to
differentiate between separate test runs might easily lead to cluttering
OUTPUT_DIR.
(This change means OUTPUT_DIR is no longer written to by the iotests, so
we can drop its usage altogether.)
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220221172909.762858-1-hreitz@redhat.com>
[hreitz: Simplified `Path(os.path.join(x, y))` to `Path(x, y)`, as
suggested by Vladimir; and rebased on 9086c76398
("tests/qemu-iotests: Rework the checks and spots using GNU
sed")]
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Instead of failing the iotests if GNU sed is not available (or skipping
them completely in the check-block.sh script), it would be better to
simply skip the bash-based tests that rely on GNU sed, so that the other
tests could still be run. Thus we now explicitely use "gsed" (either as
direct program or as a wrapper around "sed" if it's the GNU version)
in the spots that rely on the GNU sed behavior. Statements that use the
"-r" parameter of sed have been switched to use "-E" instead, since this
switch is supported by all sed versions on our supported build hosts
(most also support "-r", but macOS' sed only supports "-E"). With all
these changes in place, we then can also remove the sed checks from the
check-block.sh script, so that "make check-block" can now be run on
systems without GNU sed, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220216125454.465041-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We want iotests pass with both the default zlib compression and with
IMGOPTS='compression_type=zstd'.
Actually the only test that is interested in real compression type in
test output is 287 (test for qcow2 compression type), so implement
specific option for it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211223160144.1097696-17-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
We'll use it in tests instead of explicit qcow2.py. Then we are going
to add some filtering in _qcow2_dump_header.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20211223160144.1097696-14-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Remove read timer in test script when GDB_OPTIONS are set,
so that the bash tests won't timeout while running gdb.
The only limitation here is that running a script with gdbserver
will make the test output mismatch with the expected
results, making the test fail.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20210809090114.64834-9-eesposit@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Without the allow_other mount option, no user (not even root) but the
one who started qemu/the storage daemon can access the export. Allow
users to configure the export such that such accesses are possible.
While allow_other is probably what users want, we cannot make it an
unconditional default, because passing it is only possible (for non-root
users) if the global fuse.conf configuration file allows it. Thus, the
default is an 'auto' mode, in which we first try with allow_other, and
then fall back to without.
FuseExport.allow_other reports whether allow_other was actually used as
a mount option or not. Currently, this information is not used, but a
future patch will let this field decide whether e.g. an export's UID and
GID can be changed through chmod.
One notable thing about 'auto' mode is that libfuse may print error
messages directly to stderr, and so may fusermount (which it executes).
Our export code cannot really filter or hide them. Therefore, if 'auto'
fails its first attempt and has to fall back, fusermount will print an
error message that mounting with allow_other failed.
This behavior necessitates a change to iotest 308, namely we need to
filter out this error message (because if the first attempt at mounting
with allow_other succeeds, there will be no such message).
Furthermore, common.rc's _make_test_img should use allow-other=off for
FUSE exports, because iotests generally do not need to access images
from other users, so allow-other=on or allow-other=auto have no
advantage. OTOH, allow-other=on will not work on systems where
user_allow_other is disabled, and with allow-other=auto, we get said
error message that we would need to filter out again. Just disabling
allow-other is simplest.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210625142317.271673-3-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It was deprecated in commit e1c4269763, v5.2.0. See that commit
message for rationale.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210501075747.3293186-1-armbru@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
And ioeventfd are only available with virtio-scsi-pci or virtio-scsi-ccw,
use the alias but add a rule to require virtio-scsi-pci or virtio-scsi-ccw
for the tests that use iothreads.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210319202335.2397060-7-laurent@vivier.eu>
Message-Id: <20210323165308.15244-22-alex.bennee@linaro.org>
To disallow certain refcount_bits values, some _unsupported_imgopts
invocations look like "refcount_bits=1[^0-9]", i.e. they match an
integer boundary with [^0-9]. This expression does not match the end of
the string, though, so it breaks down when refcount_bits is the last
option (which it tends to be after the rewrite of the check script in
Python).
Those invocations could use \b or \> instead, but those are not
portable. They could use something like \([^0-9]\|$\), but that would
be cumbersome. To make it simple and keep the existing invocations
working, just let _unsupported_imgopts match the regex against $IMGOPTS
plus a trailing space.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210210095128.22732-1-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
common.rc assumes it is being sourced from the same directory and
so also tries to source common.config from the current working
directory. With the ability to now have named tests in the tests/
subdir we need to check two locations for common.config.
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210204124834.774401-12-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Unfortunately commit "iotests: handle tmpfs" breaks running iotests
with -nbd -nocache, as _check_o_direct tries to create
$TEST_IMG.test_o_direct, but in case of nbd TEST_IMG is something like
nbd+unix:///... , and test fails with message
qemu-img: nbd+unix:///?socket[...]test_o_direct: Protocol driver
'nbd' does not support image creation, and opening the image
failed: Failed to connect to '/tmp/tmp.[...]/nbd/test_o_direct': No
such file or directory
Use TEST_DIR instead.
Fixes: cfdca2b9f9
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201218182012.47607-1-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This pretends FUSE exports are a kind of protocol. As such, they are
always tested under the format node. This is probably the best way to
test them, actually, because this will generate more I/O load and more
varied patterns.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201027190600.192171-19-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When most iotests want to create a test image that is named differently
from the default $TEST_IMG, they do something like this:
TEST_IMG="$TEST_IMG.base" _make_test_img $options
This works fine with the "file" protocol, but not so much for anything
else: _make_test_img tries to create an image under $TEST_IMG_FILE
first, and only under $TEST_IMG if the former is not set; and on
everything but "file", $TEST_IMG_FILE is set.
There are two ways we can fix this: First, we could make all tests
adjust not only TEST_IMG, but also TEST_IMG_FILE if that is present
(e.g. with something like _set_test_img_suffix $suffix that would affect
not only TEST_IMG but also TEST_IMG_FILE, if necessary). This is a
pretty clean solution, and this is maybe what we should have done from
the start.
But it would also require changes to most existing bash tests. So the
alternative is this: Let _make_test_img see whether $TEST_IMG_FILE still
points to the original value. If so, it is possible that the caller has
adjusted $TEST_IMG but not $TEST_IMG_FILE. In such a case, we can (for
most protocols) derive the corresponding $TEST_IMG_FILE value from
$TEST_IMG value and thus work around what technically is the caller
misbehaving.
This second solution is less clean, but it is robust against people
keeping their old habit of adjusting TEST_IMG only, and requires much
less changes. So this patch implements it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027190600.192171-15-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The vxhs code doesn't compile since v2.12.0. There's no point in fixing
and then adding CI for a config that our users have demonstrated that
they do not use; better to just remove it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200711065926.2204721-1-marcandre.lureau@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Whenever running an iotest for the luks format, we should check whether
luks actually really works.
Tests that try to create luks-encrypted qcow2 images should do the same.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200625125548.870061-7-mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
That the luks driver is present is little indication on whether it is
actually working. Without the crypto libraries linked in, it does not
work. So add this function, which tries to create a luks image to see
whether that actually works.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200625125548.870061-4-mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Some tests requires O_DIRECT, or want it by default. Introduce smarter
O_DIRECT handling:
- Check O_DIRECT in common.rc, if it is requested by selected
cache-mode.
- Support second fall-through argument in _default_cache_mode
Inspired-by: Max's 23e1d05411
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200430124713.3067-2-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Similarly to peek_file_[bl]e, we may want to write binary integers into
a file. Currently, this often means messing around with poke_file and
raw binary strings. I hope these functions make it a bit more
comfortable.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Code-suggested-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200324172757.1173824-3-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Tests 261 and 272 fail on RHEL 7 with coreutils 8.22, since od
--endian was not added until coreutils 8.23. Fix this by manually
constructing the final value one byte at a time.
Fixes: fc8ba423
Reported-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200226125424.481840-1-eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We are going to enable 127 in the "auto" group, but it only works if
virtio-scsi and scsi-hd are available - which is not the case with
QEMU binaries like qemu-system-tricore for example, so we need a
proper check for the availability of these devices here.
A very similar problem exists in iotest 267 - it has been added to
the "auto" group already, but requires virtio-blk and thus currently
fails with qemu-system-tricore for example. Let's also add aproper
check there.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 20200121095205.26323-5-thuth@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The problem with allowing the data_file option is that you want to use a
different data file per image used in the test. Therefore, we need to
allow patterns like -o data_file='$TEST_IMG.data_file'.
Then, we need to filter it out from qemu-img map, qemu-img create, and
remove the data file in _rm_test_img.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-23-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Blindly overriding IMGOPTS is suboptimal as this discards user-specified
options. Whatever options the test needs should simply be appended.
Some tests do this (with IMGOPTS=$(_optstr_add "$IMGOPTS" "...")), but
that is cumbersome. It’s simpler to just give _make_test_img an -o
parameter with which tests can add options.
Some tests actually must override the user-specified options, though,
for example when creating an image in a different format than the test
$IMGFMT. For such cases, --no-opts allows clearing the current option
list.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-10-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This will allow us to add more options than just -b.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-9-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
There is no $SOCKDIR, only $SOCK_DIR.
Fixes: f3923a72f1
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some tests create huge (but sparse) files, and to be able to run those
tests in certain limited environments (like CI containers), we have to
check for the possibility to create such files first. Thus let's introduce
a common function to check for large files, and replace the already
existing checks in the iotests 005 and 220 with this function.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Up to now, all it took to cause a lot of iotest failures was to have a
background process such as 'nbdkit -p 10810 null' running, because we
hard-coded the TCP port. Switching to a Unix socket eliminates this
contention. We still have TCP coverage in test 233, and that test is
more careful to not pick a hard-coded port.
Add a comment explaining where the format layer applies when using
NBD as protocol (until NBD gains support for a resize extension, we
only pipe raw bytes over the wire).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20191114213415.23499-3-eblake@redhat.com>
[eblake: Tweak socket name per Max Reitz' review]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191011152814.14791-16-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Upcoming asynchronous handling of sub-parts of qcow2 requests will
change number of leaked clusters and even make it racy. As a
preparation, ignore leaks on failure parts in 026.
It's not trivial to just grep or substitute qemu-img output for such
thing. Instead do better: 3 is a error code of qemu-img check, if only
leaks are found. Catch this case and print success output.
Suggested-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190916175324.18478-2-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The new function _casenotrun() is to be invoked if a test case cannot
be run for some reason. The user will be notified by a message passed
to the function. It is the caller's responsibility to make skipped a
particular test.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The Valgrind tool fails to manage its termination in multi-threaded
processes when they raise the signal SIGKILL. The bug has been reported
to the Valgrind maintainers and was registered as the bug #409141:
https://bugs.kde.org/show_bug.cgi?id=409141
Let's exclude such test cases from running under the Valgrind until a
new version with the bug fix is released because checking for the
memory issues is covered by other test cases.
Suggested-by: John Snow <jsnow@redhat.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
With the '-valgrind' option, let all the QEMU processes be run under
the Valgrind tool. The Valgrind own parameters may be set with its
environment variable VALGRIND_OPTS, e.g.
$ VALGRIND_OPTS="--leak-check=yes" ./check -valgrind <test#>
or they may be listed in the Valgrind checked file ./.valgrindrc or
~/.valgrindrc like
--memcheck:leak-check=no
--memcheck:track-origins=yes
To exclude a specific process from running under the Valgrind, the
corresponding environment variable VALGRIND_QEMU_<name> is to be set
to the empty string:
$ VALGRIND_QEMU_IO= ./check -valgrind <test#>
When QEMU-IO process is being killed, the shell report refers to the
text of the command in _qemu_io_wrapper(), which was modified with this
patch. So, the benchmark output for the tests 039, 061 and 137 is to be
changed also.
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It is possible to enable only a subset of the block drivers with the
"--block-drv-rw-whitelist" option of the "configure" script. All other
drivers are marked as unusable (or only included as read-only with the
"--block-drv-ro-whitelist" option). If an iotest is now using such a
disabled block driver, it is failing - which is bad, since at least the
tests in the "auto" group should be able to deal with this situation.
Thus let's introduce a "_require_drivers" function that can be used by
the shell tests to check for the availability of certain drivers first,
and marks the test as "not run" if one of the drivers is missing.
This patch mainly targets the test in the "auto" group which should
never fail in such a case, but also improves some of the other tests
along the way. Note that we also assume that the "qcow2" and "file"
drivers are always available - otherwise it does not make sense to
run "make check-block" at all (which only tests with qcow2 by default).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 20190823133552.11680-1-thuth@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This requires some changes to keep iotests 104 and 207 working.
qemu-img info in 104 will now return a filename including the user name
and the port, which need to be filtered by adjusting REMOTE_TEST_DIR in
common.rc. This additional information has to be marked optional,
however (which is simple as REMOTE_TEST_DIR is a regex), because
otherwise 197 and 215 would fail: They use it (indirectly) to filter
qemu-img create output which contains a backing filename they have
passed to it -- which probably does not contain a user name or port
number.
The problem in 207 is a nice one to have: qemu-img info used to return
json:{} filenames, but with this patch it returns nice plain ones. We
now need to adjust the filtering to hide the user name (and port number
while we are at it). The simplest way to do this is to include both in
iotests.remote_filename() so that bdrv_refresh_filename() will not
change it, and then iotests.img_info_log() will filter it correctly
automatically.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Message-id: 20190225190828.17726-2-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Various sed regexp from common.filter use sed GNU extensions.
Instead of spending time to write these regex to be POSIX compliant,
verify the GNU sed is available and use it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Bash is not always installed as /bin/bash. In particular on OpenBSD,
the package installs it in /usr/local/bin.
Use the 'env' shebang to search bash in the $PATH.
Patch created mechanically by running:
$ git grep -lE '#! ?/bin/bash' -- tests/qemu-iotests \
| while read f; do \
sed -i 's|^#!.\?/bin/bash$|#!/usr/bin/env bash|' $f; \
done
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
8908b253c4 has implemented filtering of
remote paths for NFS, but forgot SSH. This patch takes care of that.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190210145736.1486-9-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
POSIX requires $PWD to be reliable, and we expect all
shells used by qemu scripts to be relatively close to
POSIX. Thus, it is smarter to avoid forking the pwd
executable for something that is already available in
the environment.
So replace it with the following:
sed -i 's/\(`pwd`\|\$(pwd)\)/$PWD/g' $(git grep -l pwd)
Then delete a pointless line assigning PWD to itself.
Cc: kwolf@redhat.com
Cc: mreitz@redhat.com
Cc: eblake@redhat.com
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Message-Id: <20181024094051.4470-2-maozhongyi@cmss.chinamobile.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: touch up commit message, reorder series, tweak a couple more files]
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit cce293a294 moved some functions from common.config to
common.rc, but the error messages still reference the old file
location.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20181004161852.11673-5-crosa@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
197 is one example where _make_test_img is used twice without stopping
the NBD server in between. An error will occur like this:
@@ -26,9 +26,13 @@
=== Partial final cluster ===
+qemu-img: TEST_DIR/t.IMGFMT: Failed to get "resize" lock
+Is another process using the image?
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1024
+Failed to find an available port: Address already in use
read 1024/1024 bytes at offset 0
Patch _make_test_img to stop the old qemu-nbd before starting a new one,
which fixes this problem, and similarly 215.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
NFS paths were only partially filtered in _filter_img_create, _img_info
and _filter_img_info, resulting in "nfs://127.0.0.1TEST_DIR/t.IMGFMT".
This adds another replacement to the sed calls that matches the test
directory not as a host path, but as an NFS URL (the prefix as used for
$TEST_IMG).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Test cases were trying to use nfs:// URLs as local filenames, which made
every test fail for NFS. With TEST_IMG and TEST_IMG_FILE set like for
the other protocols, NFS tests can pass again.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Old-style NBD is deprecated upstream (it is documented, but no
longer implemented in the reference implementation), and it is
severely limited (it cannot support structured replies, which
means it cannot support efficient handling of zeroes), when
compared to new-style NBD. We are better off having our iotests
favor new-style everywhere (although some explicit tests,
particularly 83, still cover old-style for back-compat reasons);
this is as simple as supplying the empty string as the default
export name, as it does not change the URI needed to connect a
client to the server. This also gives us more coverage of the
just-added structured reply code, when not overriding $QEMU_NBD
to intentionally point to an older server.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20171109221216.10248-1-eblake@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The variable is almost unused, and one of the two uses is actually
uninitialized.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Split "check" parts from tests part.
For the directory setup, the actual computation of directories goes
in "check", while the sanity checks go in the tests.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini