VMDK files support an attribute that represents the version of the guest
tools that are installed on the disk.
This attribute is used by vSphere before a machine has been started to
determine if the VM has the guest tools installed.
This is important when configuring "Operating system customizations" in
vSphere, as it checks for the presence of the guest tools before
allowing those customizations.
Thus when the VM has not yet booted normally it would be impossible to
customize it, therefore preventing a customized first-boot.
The attribute should not hurt on disks that do not have the guest tools
installed and indeed the VMware tools also unconditionally add this
attribute.
(Defaulting to the value "2147483647", as is done in this patch)
Signed-off-by: Thomas Weißschuh <thomas.weissschuh.ext@zeiss.com>
Message-Id: <20210913130419.13241-1-thomas.weissschuh.ext@zeiss.com>
[hreitz: Added missing '#' in block-core.json]
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.
Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
So, convert driver write_zeroes handlers bytes parameter to int64_t.
The only caller of all updated function is bdrv_co_do_pwrite_zeroes().
bdrv_co_do_pwrite_zeroes() itself is of course OK with widening of
callee parameter type. Also, bdrv_co_do_pwrite_zeroes()'s
max_write_zeroes is limited to INT_MAX. So, updated functions all are
safe, they will not get "bytes" larger than before.
Still, let's look through all updated functions, and add assertions to
the ones which are actually unprepared to values larger than INT_MAX.
For these drivers also set explicit max_pwrite_zeroes limit.
Let's go:
blkdebug: calculations can't overflow, thanks to
bdrv_check_qiov_request() in generic layer. rule_check() and
bdrv_co_pwrite_zeroes() both have 64bit argument.
blklogwrites: pass to blk_log_writes_co_log() with 64bit argument.
blkreplay, copy-on-read, filter-compress: pass to
bdrv_co_pwrite_zeroes() which is OK
copy-before-write: Calls cbw_do_copy_before_write() and
bdrv_co_pwrite_zeroes, both have 64bit argument.
file-posix: both handler calls raw_do_pwrite_zeroes, which is updated.
In raw_do_pwrite_zeroes() calculations are OK due to
bdrv_check_qiov_request(), bytes go to RawPosixAIOData::aio_nbytes
which is uint64_t.
Check also where that uint64_t gets handed:
handle_aiocb_write_zeroes_block() passes a uint64_t[2] to
ioctl(BLKZEROOUT), handle_aiocb_write_zeroes() calls do_fallocate()
which takes off_t (and we compile to always have 64-bit off_t), as
does handle_aiocb_write_zeroes_unmap. All look safe.
gluster: bytes go to GlusterAIOCB::size which is int64_t and to
glfs_zerofill_async works with off_t.
iscsi: Aha, here we deal with iscsi_writesame16_task() that has
uint32_t num_blocks argument and iscsi_writesame16_task() has
uint16_t argument. Make comments, add assertions and clarify
max_pwrite_zeroes calculation.
iscsi_allocmap_() functions already has int64_t argument
is_byte_request_lun_aligned is simple to update, do it.
mirror_top: pass to bdrv_mirror_top_do_write which has uint64_t
argument
nbd: Aha, here we have protocol limitation, and NBDRequest::len is
uint32_t. max_pwrite_zeroes is cleanly set to 32bit value, so we are
OK for now.
nvme: Again, protocol limitation. And no inherent limit for
write-zeroes at all. But from code that calculates cdw12 it's obvious
that we do have limit and alignment. Let's clarify it. Also,
obviously the code is not prepared to handle bytes=0. Let's handle
this case too.
trace events already 64bit
preallocate: pass to handle_write() and bdrv_co_pwrite_zeroes(), both
64bit.
rbd: pass to qemu_rbd_start_co() which is 64bit.
qcow2: offset + bytes and alignment still works good (thanks to
bdrv_check_qiov_request()), so tail calculation is OK
qcow2_subcluster_zeroize() has 64bit argument, should be OK
trace events updated
qed: qed_co_request wants int nb_sectors. Also in code we have size_t
used for request length which may be 32bit. So, let's just keep
INT_MAX as a limit (aligning it down to pwrite_zeroes_alignment) and
don't care.
raw-format: Is OK. raw_adjust_offset and bdrv_co_pwrite_zeroes are both
64bit.
throttle: Both throttle_group_co_io_limits_intercept() and
bdrv_co_pwrite_zeroes() are 64bit.
vmdk: pass to vmdk_pwritev which is 64bit
quorum: pass to quorum_co_pwritev() which is 64bit
Hooray!
At this point all block drivers are prepared to support 64bit
write-zero requests, or have explicitly set max_pwrite_zeroes.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210903102807.27127-8-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: use <= rather than < in assertions relying on max_pwrite_zeroes]
Signed-off-by: Eric Blake <eblake@redhat.com>
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.
Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
So, convert driver write handlers parameters which are already 64bit to
signed type.
While being here, convert also flags parameter to be BdrvRequestFlags.
Now let's consider all callers. Simple
git grep '\->bdrv_\(aio\|co\)_pwritev\(_part\)\?'
shows that's there three callers of driver function:
bdrv_driver_pwritev() and bdrv_driver_pwritev_compressed() in
block/io.c, both pass int64_t, checked by bdrv_check_qiov_request() to
be non-negative.
qcow2_save_vmstate() does bdrv_check_qiov_request().
Still, the functions may be called directly, not only by drv->...
Let's check:
git grep '\.bdrv_\(aio\|co\)_pwritev\(_part\)\?\s*=' | \
awk '{print $4}' | sed 's/,//' | sed 's/&//' | sort | uniq | \
while read func; do git grep "$func(" | \
grep -v "$func(BlockDriverState"; done
shows several callers:
qcow2:
qcow2_co_truncate() write at most up to @offset, which is checked in
generic qcow2_co_truncate() by bdrv_check_request().
qcow2_co_pwritev_compressed_task() pass the request (or part of the
request) that already went through normal write path, so it should
be OK
qcow:
qcow_co_pwritev_compressed() pass int64_t, it's updated by this patch
quorum:
quorum_co_pwrite_zeroes() pass int64_t and int - OK
throttle:
throttle_co_pwritev_compressed() pass int64_t, it's updated by this
patch
vmdk:
vmdk_co_pwritev_compressed() pass int64_t, it's updated by this
patch
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210903102807.27127-5-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.
Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
So, convert driver read handlers parameters which are already 64bit to
signed type.
While being here, convert also flags parameter to be BdrvRequestFlags.
Now let's consider all callers. Simple
git grep '\->bdrv_\(aio\|co\)_preadv\(_part\)\?'
shows that's there three callers of driver function:
bdrv_driver_preadv() in block/io.c, passes int64_t, checked by
bdrv_check_qiov_request() to be non-negative.
qcow2_load_vmstate() does bdrv_check_qiov_request().
do_perform_cow_read() has uint64_t argument. And a lot of things in
qcow2 driver are uint64_t, so converting it is big job. But we must
not work with requests that don't satisfy bdrv_check_qiov_request(),
so let's just assert it here.
Still, the functions may be called directly, not only by drv->...
Let's check:
git grep '\.bdrv_\(aio\|co\)_preadv\(_part\)\?\s*=' | \
awk '{print $4}' | sed 's/,//' | sed 's/&//' | sort | uniq | \
while read func; do git grep "$func(" | \
grep -v "$func(BlockDriverState"; done
The only one such caller:
QEMUIOVector qiov = QEMU_IOVEC_INIT_BUF(qiov, &data, 1);
...
ret = bdrv_replace_test_co_preadv(bs, 0, 1, &qiov, 0);
in tests/unit/test-bdrv-drain.c, and it's OK obviously.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210903102807.27127-4-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: fix typos]
Signed-off-by: Eric Blake <eblake@redhat.com>
The easiest spots to use QAPI_LIST_APPEND are where we already have an
obvious pointer to the tail of a list. While at it, consistently use
the variable name 'tail' for that purpose.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210113221013.390592-5-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Fedora 32 gcc 10 seems to give false positives:
Compiling C object libblock.fa.p/block_vmdk.c.o
../block/vmdk.c: In function ‘vmdk_parse_extents’:
../block/vmdk.c:587:5: error: ‘extent’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
587 | g_free(extent->l1_table);
| ^~~~~~~~~~~~~~~~~~~~~~~~
../block/vmdk.c:754:17: note: ‘extent’ was declared here
754 | VmdkExtent *extent;
| ^~~~~~
../block/vmdk.c:620:11: error: ‘extent’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
620 | ret = vmdk_init_tables(bs, extent, errp);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../block/vmdk.c:598:17: note: ‘extent’ was declared here
598 | VmdkExtent *extent;
| ^~~~~~
../block/vmdk.c:1178:39: error: ‘extent’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
1178 | extent->flat_start_offset = flat_offset << 9;
| ~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~
../block/vmdk.c: In function ‘vmdk_open_vmdk4’:
../block/vmdk.c:581:22: error: ‘extent’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
581 | extent->l2_cache =
| ~~~~~~~~~~~~~~~~~^
582 | g_malloc(extent->entry_size * extent->l2_size * L2_CACHE_SIZE);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../block/vmdk.c:872:17: note: ‘extent’ was declared here
872 | VmdkExtent *extent;
| ^~~~~~
../block/vmdk.c: In function ‘vmdk_open’:
../block/vmdk.c:620:11: error: ‘extent’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
620 | ret = vmdk_init_tables(bs, extent, errp);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../block/vmdk.c:598:17: note: ‘extent’ was declared here
598 | VmdkExtent *extent;
| ^~~~~~
cc1: all warnings being treated as errors
make: *** [Makefile.ninja:884: libblock.fa.p/block_vmdk.c.o] Error 1
fix them by assigning a default value.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Fam Zheng <fam@euphon.net>
Message-Id: <20200930155859.303148-2-borntraeger@de.ibm.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Before HEAD^, we needed this because bdrv_co_flush() by itself would
only flush bs->file. With HEAD^, bdrv_co_flush() will flush all
children on which a WRITE or WRITE_UNCHANGED permission has been taken.
Thus, vmdk no longer needs to do it itself.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Remove superfluous breaks, as there is a "return" before them.
Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1594631107-36574-1-git-send-email-wang.yi59@zte.com.cn>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
vmdk already requires that if backing_file is present, that it be
another vmdk image (see vmdk_co_do_create). Meanwhile, we want to
move towards always being explicit about the backing format for other
drivers where it matters. So for convenience, make qemu-img create -F
vmdk work, while rejecting all other explicit formats (note that this
is only for QemuOpts usage; there is no change to the QAPI to allow a
format through -blockdev).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200706203954.341758-5-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When migrate_add_blocker(blocker, &errp) is followed by
error_propagate(errp, err), we can often just as well do
migrate_add_blocker(..., errp).
Do that with this Coccinelle script:
@@
expression blocker, err, errp;
expression ret;
@@
- ret = migrate_add_blocker(blocker, &err);
- if (err) {
+ ret = migrate_add_blocker(blocker, errp);
+ if (ret < 0) {
... when != err;
- error_propagate(errp, err);
...
}
@@
expression blocker, err, errp;
@@
- migrate_add_blocker(blocker, &err);
- if (err) {
+ if (migrate_add_blocker(blocker, errp) < 0) {
... when != err;
- error_propagate(errp, err);
...
}
Double-check @err is not used afterwards. Dereferencing it would be
use after free, but checking whether it's null would be legitimate.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-43-armbru@redhat.com>
When all we do with an Error we receive into a local variable is
propagating to somewhere else, we can just as well receive it there
right away. The previous commit did that with a Coccinelle script I
consider fairly trustworthy. This commit uses the same script with
the matching of return taken out, i.e. we convert
if (!foo(..., &err)) {
...
error_propagate(errp, err);
...
}
to
if (!foo(..., errp)) {
...
...
}
This is unsound: @err could still be read between afterwards. I don't
know how to express "no read of @err without an intervening write" in
Coccinelle. Instead, I manually double-checked for uses of @err.
Suboptimal line breaks tweaked manually. qdev_realize() simplified
further to placate scripts/checkpatch.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-36-armbru@redhat.com>
When all we do with an Error we receive into a local variable is
propagating to somewhere else, we can just as well receive it there
right away. Convert
if (!foo(..., &err)) {
...
error_propagate(errp, err);
...
return ...
}
to
if (!foo(..., errp)) {
...
...
return ...
}
where nothing else needs @err. Coccinelle script:
@rule1 forall@
identifier fun, err, errp, lbl;
expression list args, args2;
binary operator op;
constant c1, c2;
symbol false;
@@
if (
(
- fun(args, &err, args2)
+ fun(args, errp, args2)
|
- !fun(args, &err, args2)
+ !fun(args, errp, args2)
|
- fun(args, &err, args2) op c1
+ fun(args, errp, args2) op c1
)
)
{
... when != err
when != lbl:
when strict
- error_propagate(errp, err);
... when != err
(
return;
|
return c2;
|
return false;
)
}
@rule2 forall@
identifier fun, err, errp, lbl;
expression list args, args2;
expression var;
binary operator op;
constant c1, c2;
symbol false;
@@
- var = fun(args, &err, args2);
+ var = fun(args, errp, args2);
... when != err
if (
(
var
|
!var
|
var op c1
)
)
{
... when != err
when != lbl:
when strict
- error_propagate(errp, err);
... when != err
(
return;
|
return c2;
|
return false;
|
return var;
)
}
@depends on rule1 || rule2@
identifier err;
@@
- Error *err = NULL;
... when != err
Not exactly elegant, I'm afraid.
The "when != lbl:" is necessary to avoid transforming
if (fun(args, &err)) {
goto out
}
...
out:
error_propagate(errp, err);
even though other paths to label out still need the error_propagate().
For an actual example, see sclp_realize().
Without the "when strict", Coccinelle transforms vfio_msix_setup(),
incorrectly. I don't know what exactly "when strict" does, only that
it helps here.
The match of return is narrower than what I want, but I can't figure
out how to express "return where the operand doesn't use @err". For
an example where it's too narrow, see vfio_intx_enable().
Silently fails to convert hw/arm/armsse.c, because Coccinelle gets
confused by ARMSSE being used both as typedef and function-like macro
there. Converted manually.
Line breaks tidied up manually. One nested declaration of @local_err
deleted manually. Preexisting unwanted blank line dropped in
hw/riscv/sifive_e.c.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-35-armbru@redhat.com>
bdrv_default_perms() can decide which permission profile to use based on
the BdrvChildRole, so block drivers do not need to select it explicitly.
The blkverify driver now no longer shares the WRITE permission for the
image to verify. We thus have to adjust two places in
test-block-iothread not to take it. (Note that in theory, blkverify
should behave like quorum in this regard and share neither WRITE nor
RESIZE for both of its children. In practice, it does not really
matter, because blkverify is used only for debugging, so we might as
well keep its permissions rather liberal.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200513110544.176672-30-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commonly, they need to pass the BDRV_CHILD_IMAGE set as the
BdrvChildRole; but there are exceptions for drivers with external data
files (qcow2 and vmdk).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200513110544.176672-26-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For now, it is always set to 0. Later patches in this series will
ensure that all callers pass an appropriate combination of flags.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200513110544.176672-6-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We want to unify child_format and child_file at some point. One of the
important things that set format drivers apart from other drivers is
that they do not expect other format nodes under them (except in the
backing chain), i.e. we must not probe formats inside of formats. That
means we need something on which to distinguish format drivers from
others, and hence this flag.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20200513110544.176672-3-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If we have a backup L2 table, we currently flush once after writing to
the active L2 table and again after writing to the backup table. A
single flush is enough and makes things a little less slow.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200430133007.170335-6-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If a cluster is already zeroed, we don't have to call vmdk_L2update(),
which is rather slow because it flushes the image file.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200430133007.170335-5-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When overwriting a zero cluster, we must not perform copy-on-write from
the backing file, but from a zeroed buffer.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200430133007.170335-4-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
m_data must contain valid data even for zero clusters when no cluster
was allocated in the image file. Without this, zero writes segfault with
images that have zeroed_grain=on.
For zero writes, we don't want to allocate a cluster in the image file
even in compressed files.
Fixes: 524089bce4
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200430133007.170335-3-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
m_data is used for zero clusters even though valid == 0. It really only
means that a new cluster was allocated in the image file. Rename it to
reflect this.
While at it, change it from int to bool, too.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200430133007.170335-2-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are several callers that need to create a new block backend from
an existing BDS; make the task slightly easier with a common helper
routine.
Suggested-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424190903.522087-2-eblake@redhat.com>
[mreitz: Set @ret only in error paths, see
https://lists.nongnu.org/archive/html/qemu-block/2020-04/msg01216.html]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200428192648.749066-2-eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Now that node level interface bdrv_truncate() supports passing request
flags to the block driver, expose this on the BlockBackend level, too.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200424125448.63318-4-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that block drivers can support flags for .bdrv_co_truncate, expose
the parameter in the node level interfaces bdrv_co_truncate() and
bdrv_truncate().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200424125448.63318-3-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This will allow the reuse of a single generic .bdrv_co_create
implementation for several drivers.
No functional changes.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200326011218.29230-2-mlevitsk@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Description copied from Linux kernel commit from Gustavo A. R. Silva
(see [3]):
--v-- description start --v--
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to
declare variable-length types such as these ones is a flexible
array member [1], introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler
warning in case the flexible array does not occur last in the
structure, which will help us prevent some kind of undefined
behavior bugs from being unadvertenly introduced [2] to the
Linux codebase from now on.
--^-- description end --^--
Do the similar housekeeping in the QEMU codebase (which uses
C99 since commit 7be41675f7).
All these instances of code were found with the help of the
following command (then manual analysis, without modifying
structures only having a single flexible array member, such
QEDTable in block/qed.h):
git grep -F '[0];'
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=76497732932f
[3] https://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux.git/commit/?id=17642a2fbd2c1
Inspired-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We have two drivers (iscsi and file-posix) that (in some cases) return
success from their .bdrv_co_truncate() implementation if the block
device is larger than the requested offset, but cannot be shrunk. Some
callers do not want that behavior, so this patch adds a new parameter
that they can use to turn off that behavior.
This patch just adds the parameter and lets the block/io.c and
block/block-backend.c functions pass it around. All other callers
always pass false and none of the implementations evaluate it, so that
this patch does not change existing behavior. Future patches take care
of that.
Suggested-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190918095144.955-5-mreitz@redhat.com
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Compressed writes generally have to write full clusters, not just in
theory but also in practice when it comes to vmdk's streamOptimized
subformat. It currently is just silently broken for writes with
non-zero in-cluster offsets:
$ qemu-img create -f vmdk -o subformat=streamOptimized foo.vmdk 1M
$ qemu-io -c 'write 4k 4k' -c 'read 4k 4k' foo.vmdk
wrote 4096/4096 bytes at offset 4096
4 KiB, 1 ops; 00.01 sec (443.724 KiB/sec and 110.9309 ops/sec)
read failed: Invalid argument
(The technical reason is that vmdk_write_extent() just writes the
incomplete compressed data actually to offset 4k. When reading the
data, vmdk_read_extent() looks at offset 0 and finds the compressed data
size to be 0, because that is what it reads from there. This yields an
error.)
For incomplete writes with zero in-cluster offsets, the error path when
reading the rest of the cluster is a bit different, but the result is
the same:
$ qemu-img create -f vmdk -o subformat=streamOptimized foo.vmdk 1M
$ qemu-io -c 'write 0k 4k' -c 'read 4k 4k' foo.vmdk
wrote 4096/4096 bytes at offset 0
4 KiB, 1 ops; 00.01 sec (362.641 KiB/sec and 90.6603 ops/sec)
read failed: Invalid argument
(Here, vmdk_read_extent() finds the data and then sees that the
uncompressed data is short.)
It is better to reject invalid writes than to make the user believe they
might have succeeded and then fail when trying to read it back.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190815153638.4600-5-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This makes iotest 033 pass with e.g. subformat=monolithicFlat. It also
turns a former error in 059 into success.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190815153638.4600-3-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Fixes: 69f47505ee
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190725155512.9827-3-mreitz@redhat.com
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Until ESXi 6.5 VMware used the vmfsSparse format for snapshots (VMDK3 in
QEMU).
This format was lacking in the following:
* Grain directory (L1) and grain table (L2) entries were 32-bit,
allowing access to only 2TB (slightly less) of data.
* The grain size (default) was 512 bytes - leading to data
fragmentation and many grain tables.
* For space reclamation purposes, it was necessary to find all the
grains which are not pointed to by any grain table - so a reverse
mapping of "offset of grain in vmdk" to "grain table" must be
constructed - which takes large amounts of CPU/RAM.
The format specification can be found in VMware's documentation:
https://www.vmware.com/support/developer/vddk/vmdk_50_technote.pdf
In ESXi 6.5, to support snapshot files larger than 2TB, a new format was
introduced: SESparse (Space Efficient).
This format fixes the above issues:
* All entries are now 64-bit.
* The grain size (default) is 4KB.
* Grain directory and grain tables are now located at the beginning
of the file.
+ seSparse format reserves space for all grain tables.
+ Grain tables can be addressed using an index.
+ Grains are located in the end of the file and can also be
addressed with an index.
- seSparse vmdks of large disks (64TB) have huge preallocated
headers - mainly due to L2 tables, even for empty snapshots.
* The header contains a reverse mapping ("backmap") of "offset of
grain in vmdk" to "grain table" and a bitmap ("free bitmap") which
specifies for each grain - whether it is allocated or not.
Using these data structures we can implement space reclamation
efficiently.
* Due to the fact that the header now maintains two mappings:
* The regular one (grain directory & grain tables)
* A reverse one (backmap and free bitmap)
These data structures can lose consistency upon crash and result
in a corrupted VMDK.
Therefore, a journal is also added to the VMDK and is replayed
when the VMware reopens the file after a crash.
Since ESXi 6.7 - SESparse is the only snapshot format available.
Unfortunately, VMware does not provide documentation regarding the new
seSparse format.
This commit is based on black-box research of the seSparse format.
Various in-guest block operations and their effect on the snapshot file
were tested.
The only VMware provided source of information (regarding the underlying
implementation) was a log file on the ESXi:
/var/log/hostd.log
Whenever an seSparse snapshot is created - the log is being populated
with seSparse records.
Relevant log records are of the form:
[...] Const Header:
[...] constMagic = 0xcafebabe
[...] version = 2.1
[...] capacity = 204800
[...] grainSize = 8
[...] grainTableSize = 64
[...] flags = 0
[...] Extents:
[...] Header : <1 : 1>
[...] JournalHdr : <2 : 2>
[...] Journal : <2048 : 2048>
[...] GrainDirectory : <4096 : 2048>
[...] GrainTables : <6144 : 2048>
[...] FreeBitmap : <8192 : 2048>
[...] BackMap : <10240 : 2048>
[...] Grain : <12288 : 204800>
[...] Volatile Header:
[...] volatileMagic = 0xcafecafe
[...] FreeGTNumber = 0
[...] nextTxnSeqNumber = 0
[...] replayJournal = 0
The sizes that are seen in the log file are in sectors.
Extents are of the following format: <offset : size>
This commit is a strict implementation which enforces:
* magics
* version number 2.1
* grain size of 8 sectors (4KB)
* grain table size of 64 sectors
* zero flags
* extent locations
Additionally, this commit proivdes only a subset of the functionality
offered by seSparse's format:
* Read-only
* No journal replay
* No space reclamation
* No unmap support
Hence, journal header, journal, free bitmap and backmap extents are
unused, only the "classic" (L1 -> L2 -> data) grain access is
implemented.
However there are several differences in the grain access itself.
Grain directory (L1):
* Grain directory entries are indexes (not offsets) to grain
tables.
* Valid grain directory entries have their highest nibble set to
0x1.
* Since grain tables are always located in the beginning of the
file - the index can fit into 32 bits - so we can use its low
part if it's valid.
Grain table (L2):
* Grain table entries are indexes (not offsets) to grains.
* If the highest nibble of the entry is:
0x0:
The grain in not allocated.
The rest of the bytes are 0.
0x1:
The grain is unmapped - guest sees a zero grain.
The rest of the bits point to the previously mapped grain,
see 0x3 case.
0x2:
The grain is zero.
0x3:
The grain is allocated - to get the index calculate:
((entry & 0x0fff000000000000) >> 48) |
((entry & 0x0000ffffffffffff) << 12)
* The difference between 0x1 and 0x2 is that 0x1 is an unallocated
grain which results from the guest using sg_unmap to unmap the
grain - but the grain itself still exists in the grain extent - a
space reclamation procedure should delete it.
Unmapping a zero grain has no effect (0x2 will not change to 0x1)
but unmapping an unallocated grain will (0x0 to 0x1) - naturally.
In order to implement seSparse some fields had to be changed to support
both 32-bit and 64-bit entry sizes.
Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com>
Reviewed-by: Eyal Moscovici <eyal.moscovici@oracle.com>
Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com>
Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com>
Message-id: 20190620091057.47441-4-shmuel.eiderman@oracle.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
512M of L1 entries is a very loose bound, only 32M are required to store
the maximal supported VMDK file size of 2TB.
Fixed qemu-iotest 59# - now failure occures before on impossible L1
table size.
Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com>
Reviewed-by: Eyal Moscovici <eyal.moscovici@oracle.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com>
Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com>
Message-id: 20190620091057.47441-3-shmuel.eiderman@oracle.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Commit b0651b8c24 ("vmdk: Move l1_size check into vmdk_add_extent")
extended the l1_size check from VMDK4 to VMDK3 but did not update the
default coverage in the moved comment.
The previous vmdk4 calculation:
(512 * 1024 * 1024) * 512(l2 entries) * 65536(grain) = 16PB
The added vmdk3 calculation:
(512 * 1024 * 1024) * 4096(l2 entries) * 512(grain) = 1PB
Adding the calculation of vmdk3 to the comment.
In any case, VMware does not offer virtual disks more than 2TB for
vmdk4/vmdk3 or 64TB for the new undocumented seSparse format which is
not implemented yet in qemu.
Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com>
Reviewed-by: Eyal Moscovici <eyal.moscovici@oracle.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com>
Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com>
Message-id: 20190620091057.47441-2-shmuel.eiderman@oracle.com
Reviewed-by: yuchenlin <yuchenlin@synology.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This adds a new parameter to blk_new() which requires its callers to
declare from which AioContext this BlockBackend is going to be used (or
the locks of which AioContext need to be taken anyway).
The given context is only stored and kept up to date when changing
AioContexts. Actually applying the stored AioContext to the root node
is saved for another commit.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit b69864e5a ("vmdk: Support version=3 in VMDK descriptor files")
fixed the probe function to correctly guess vmdk descriptors with
version=3.
This solves the issue where vmdk snapshot with parent vmdk descriptor
containing "version=3" would be treated as raw instead vmdk.
In the future case where a new vmdk version is introduced, we will again
experience this issue, even if the user will provide "-f vmdk" it will
only apply to the tip image and not to the underlying "misprobed" parent
image.
The code in vmdk.c already assumes that the backing file of vmdk must be
vmdk (see vmdk_is_cid_valid which returns 0 if backing file is not
vmdk).
So let's make it official by supplying the backing_format as vmdk.
Reviewed-by: Mark Kanda <mark.kanda@oracle.com>
Reviewed-By: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com>
Signed-off-by: Shmuel Eiderman <shmuel.eiderman@oracle.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <fam@euphon.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 509d39aa22 added support for read
only VMDKs of version 3.
This commit fixes the probe function to correctly handle descriptors of
version 3.
This commit has two effects:
1. We no longer need to supply '-f vmdk' when pointing to descriptor
files of version 3 in qemu/qemu-img command line arguments.
2. This fixes the scenario where a VMDK points to a parent version 3
descriptor file which is being probed as "raw" instead of "vmdk".
Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com>
Reviewed-by: Mark Kanda <mark.kanda@oracle.com>
Signed-off-by: Shmuel Eiderman <shmuel.eiderman@oracle.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
- Block graph change fixes (avoid loops, cope with non-tree graphs)
- bdrv_set_aio_context() related fixes
- HMP snapshot commands: Use only tag, not the ID to identify snapshots
- qmeu-img, commit: Error path fixes
- block/nvme: Build fix for gcc 9
- MAINTAINERS updates
- Fix various issues with bdrv_refresh_filename()
- Fix various iotests
- Include LUKS overhead in qemu-img measure for qcow2
- A fix for vmdk's image creation interface
-----BEGIN PGP SIGNATURE-----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=gaah
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- Block graph change fixes (avoid loops, cope with non-tree graphs)
- bdrv_set_aio_context() related fixes
- HMP snapshot commands: Use only tag, not the ID to identify snapshots
- qmeu-img, commit: Error path fixes
- block/nvme: Build fix for gcc 9
- MAINTAINERS updates
- Fix various issues with bdrv_refresh_filename()
- Fix various iotests
- Include LUKS overhead in qemu-img measure for qcow2
- A fix for vmdk's image creation interface
# gpg: Signature made Mon 25 Feb 2019 14:18:15 GMT
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (71 commits)
iotests: Skip 211 on insufficient memory
vmdk: false positive of compat6 with hwversion not set
iotests: add LUKS payload overhead to 178 qemu-img measure test
qcow2: include LUKS payload overhead in qemu-img measure
iotests.py: s/_/-/g on keys in qmp_log()
iotests: Let 045 be run concurrently
iotests: Filter SSH paths
iotests.py: Filter filename in any string value
iotests.py: Add is_str()
iotests: Fix 207 to use QMP filters for qmp_log
iotests: Fix 232 for LUKS
iotests: Remove superfluous rm from 232
iotests: Fix 237 for Python 2.x
iotests: Re-add filename filters
iotests: Test json:{} filenames of internal BDSs
block: BDS options may lack the "driver" option
block/null: Generate filename even with latency-ns
block/curl: Implement bdrv_refresh_filename()
block/curl: Harmonize option defaults
block/nvme: Fix bdrv_refresh_filename()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In vmdk_co_create_opts, when it finds hw_version is undefined, it will
set it to 4, which misleading the compat6 and hwversion in
vmdk_co_do_create. Simply set hw_version to NULL after free, let
the logic in vmdk_co_do_create to decide the value of hw_version.
This bug can be reproduced by:
$ qemu-img convert -O vmdk -o subformat=streamOptimized,compat6
/home/yuchenlin/syno.qcow2 /home/yuchenlin/syno.vmdk
qemu-img: /home/yuchenlin/syno.vmdk: error while converting vmdk:
compat6 cannot be enabled with hwversion set
Signed-off-by: yuchenlin <yuchenlin@synology.com>
Message-id: 20190221110805.28239-1-yuchenlin@synology.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Some follow-up patches will rework the way bs->full_open_options is
refreshed in bdrv_refresh_filename(). The new implementation will remove
the need for the block drivers' bdrv_refresh_filename() implementations
to set bs->full_open_options; instead, it will be generic and use static
information from each block driver.
However, by implementing bdrv_gather_child_options(), block drivers will
still be able to override the way the full_open_options of their
children are incorporated into their own.
We need to implement this function for VMDK because we have to prevent
the generic implementation from gathering the options of all children:
It is not possible to specify options for the extents through the
runtime options.
For quorum, the child names that would be used by the generic
implementation and the ones that we actually (currently) want to use
differ. See quorum_gather_child_options() for more information.
Note that both of these are cases which are not ideal: In case of VMDK
it would probably be nice to be able to specify options for all extents.
In case of quorum, the current runtime option structure is simply broken
and needs to be fixed (but that is left for another patch).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20190201192935.18394-23-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Make bdrv_get_full_backing_filename_from_filename() return an allocated
string instead of placing the result in a caller-provided buffer.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190201192935.18394-11-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Besides being safe for arbitrary path lengths, after some follow-up
patches all callers will want a freshly allocated buffer anyway.
In the meantime, path_combine_deprecated() is added which has the same
interface as path_combine() had before this patch. All callers to that
function will be converted in follow-up patches.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20190201192935.18394-10-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
If the backing file is overridden, this most probably does change the
guest-visible data of a BDS. Therefore, we will need to consider this
in bdrv_refresh_filename().
To see whether it has been overridden, we might want to compare
bs->backing_file and bs->backing->bs->filename. However,
bs->backing_file is changed by bdrv_set_backing_hd() (which is just used
to change the backing child at runtime, without modifying the image
header), so bs->backing_file most of the time simply contains a copy of
bs->backing->bs->filename anyway, so it is useless for such a
comparison.
This patch adds an auto_backing_file BDS field which contains the
backing file path as indicated by the image header, which is not changed
by bdrv_set_backing_hd().
Because of bdrv_refresh_filename() magic, however, a BDS's filename may
differ from what has been specified during bdrv_open(). Then, the
comparison between bs->auto_backing_file and bs->backing->bs->filename
may fail even though bs->backing was opened from bs->auto_backing_file.
To mitigate this, we can copy the real BDS's filename (after the whole
bdrv_open() and bdrv_refresh_filename() process) into
bs->auto_backing_file, if we know the former has been opened based on
the latter. This is only possible if no options modifying the backing
file's behavior have been specified, though. To simplify things, this
patch only copies the filename from the backing file if no options have
been specified for it at all.
Furthermore, there are cases where an overlay is created by qemu which
already contains a BDS's filename (e.g. in blockdev-snapshot-sync). We
do not need to worry about updating the overlay's bs->auto_backing_file
there, because we actually wrote a post-bdrv_refresh_filename() filename
into the image header.
So all in all, there will be false negatives where (as of a future
patch) bdrv_refresh_filename() will assume that the backing file differs
from what was specified in the image header, even though it really does
not. However, these cases should be limited to where (1) the user
actually did override something in the backing chain (e.g. by specifying
options for the backing file), or (2) the user executed a QMP command to
change some node's backing file (e.g. change-backing-file or
block-commit with @backing-file given) where the given filename does not
happen to coincide with qemu's idea of the backing BDS's filename.
Then again, (1) really is limited to -drive. With -blockdev or
blockdev-add, you have to adhere to the schema, so a user cannot give
partial "unimportant" options (e.g. by just setting backing.node-name
and leaving the rest to the image header). Therefore, trying to fix
this would mean trying to fix something for -drive only.
To improve on (2), we would need a full infrastructure to "canonicalize"
an arbitrary filename (+ options), so it can be compared against
another. That seems a bit over the top, considering that filenames
nowadays are there mostly for the user's entertainment.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20190201192935.18394-5-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Before this patch, bdrv_refresh_filename() is used in a pushing manner:
Whenever the BDS graph is modified, the parents of the modified edges
are supposed to be updated (recursively upwards). However, that is
nonviable, considering that we want child changes not to concern
parents.
Also, in the long run we want a pull model anyway: Here, we would have a
bdrv_filename() function which returns a BDS's filename, freshly
constructed.
This patch is an intermediate step. It adds bdrv_refresh_filename()
calls before every place a BDS.filename value is used. The only
exceptions are protocol drivers that use their own filename, which
clearly would not profit from refreshing that filename before.
Also, bdrv_get_encrypted_filename() is removed along the way (as a user
of BDS.filename), since it is completely unused.
In turn, all of the calls to bdrv_refresh_filename() before this patch
are removed, because we no longer have to call this function on graph
changes.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190201192935.18394-2-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Use new qemu_iovec_init_buf() instead of
qemu_iovec_init_external( ... , 1), which simplifies the code.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190218140926.333779-12-vsementsov@virtuozzo.com
Message-Id: <20190218140926.333779-12-vsementsov@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Inform a user in case qcow2_get_specific_info fails to obtain
QCOW2 image specific information. This patch is preliminary to
the one "qcow2: Add list of bitmaps to ImageInfoSpecificQCow2".
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <1549638368-530182-2-git-send-email-andrey.shinkevich@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Clarify that the number of extents provided in BlockdevCreateOptionsVmdk
must match the number of extents that will actually be used. Providing
more extents will result in an error now.
This requires adapting the test case to provide the right number of
extents.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
This makes VMDK support blockdev-create. The implementation reuses the
image creation code in vmdk_co_create_opts which now acceptes a callback
pointer to "retrieve" BlockBackend pointers from the caller. This way we
separate the logic between file/extent acquisition and initialization.
The QAPI command parameters are mostly the same as the old create_opts
except the dropped legacy @compat6 switch, which is redundant with
@hwversion.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The extracted vmdk_init_extent takes a BlockBackend object and
initializes the format metadata. It is the common part between "qemu-img
create" and "blockdev-create".
Add a "BlockBackend *pbb" parameter to vmdk_create_extent, to return the
opened BB to the caller in the next patch.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There is a rare case which the size of last compressed cluster
is larger than the cluster size, which will cause the file is
not aligned at the sector boundary.
There are three reasons to do it. First, if vmdk doesn't align at
the sector boundary, there may be many undefined behaviors,
such as, in vbox it will show VMDK: Compressed image is corrupted
'syno-vm-disk1.vmdk' (VERR_ZIP_CORRUPTED) when we try to import an
ova with unaligned vmdk. Second, all the cluster_sector is aligned
to sector, the last one should be like this, too. Third, it ease
reading with sector based I/Os.
Signed-off-by: yuchenlin <yuchenlin@synology.com>
Message-Id: <20180913082952.3675-1-yuchenlin@synology.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
VMDK performs a probing check in vmdk_co_create_opts() to prevent the
user from assigning non-VMDK files as a backing file, because it only
supports VMDK backing files. However, with the @backing runtime option,
it is possible to assign arbitrary nodes as backing nodes, regardless of
what the image header says. Therefore, VMDK may not just access backing
nodes assuming they are VMDK nodes -- which it does, because it needs to
compare the backing file's CID with the overlay's parentCID value, and
naturally the backing file only has a CID when it's a VMDK file.
Instead, it should report the CID of non-VMDK backing files not to match
the overlay because clearly a non-present CID does not match.
Without this change, vmdk_read_cid() reads from the backing file's
bs->file, which may be NULL (in which case we get a segfault). Also, it
interprets bs->opaque as a BDRVVmdkState and then reads from the
.desc_offset field, which usually will just return some arbitrary value
which then results in either garbage to be read, or bdrv_pread() to
return an error, both of which result in a non-matching CID to be
reported.
(In a very unlikely case, we could read something that looks like a
VMDK descriptor, and then get a CID which might actually match. But
that is highly unlikely, and the only result would be that VMDK accepts
the backing file which is not too bad (albeit unintentional).)
((And in theory, the seek to .desc_offset might leak data from another
block driver's opaque object. But then again, the user should realize
very quickly that a non-VMDK backing file does not work (because the
read will very likely fail, due to the reasons given above), so this
should not be exploitable.))
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180702210721.4847-2-mreitz@redhat.com
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
