After reading a PR IN command with zero request size in prh_read_request,
the resp->result field will be uninitialized and the resp.sz field will
be also uninitialized when returning to prh_co_entry.
If resp->result == GOOD (from a previous successful reply or just luck),
then the assert in prh_write_response might not be triggered and
uninitialized response will be sent.
The fix is to remove the whole handling of sz == 0 in prh_co_entry.
Those errors apply only to PR OUT commands and it's perfectly okay to
catch them later in do_pr_out and multipath_pr_out; the check for
too-short parameters in fact doesn't apply in the easy SG_IO case, as
it can be left to the target firmware even.
The result is that prh_read_request does not fail requests anymore and
prh_co_entry becomes simpler.
Reported-by: Dima Stepanov <dimastep@yandex-team.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let management know if there were any problems communicating with
qemu-pr-helper. The event is edge-triggered, and is sent every time
the connection status of the pr-manager-helper object changes.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When writing to the qemu-pr-helper socket failed, the persistent
reservation manager was correctly disconnecting the socket, but it
did not clear pr_mgr->ioc. So the rest of the code did not know
that the socket had been disconnected, accessed pr_mgr->ioc and
happily caused a crash.
To reproduce, it is enough to stop qemu-pr-helper between QEMU
startup and executing e.g. sg_persist -k /dev/sdb.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The response size is expected to be zero if the SCSI status is not
"GOOD", but nothing was resetting it.
This can be reproduced simply by "sg_persist -s /dev/sdb" where /dev/sdb
in the guest is a scsi-block device corresponding to a multipath device
on the host.
Before:
PR in (Read full status): Aborted command
and on the host:
prh_write_response: Assertion `resp->sz == 0' failed.
After:
PR in (Read full status): bad field in cdb or parameter list
(perhaps unsupported service action)
Reported-by: Jiri Belka <jbelka@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Currently --help shows "(default '(null)')" for the -k/--socket-path
option. Fix it by getting the default path in /var/run.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Let's write pidfile even if user did not request --daemon but
they requested just --pidfile. Libvirt will use exactly this.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After we've dropped privileges it might be not possible to write
pidfile. For instance, if this binary is run as root (because
user wants it to write pidfile to some privileged location)
writing pidfile fails because privileges are dropped before we
even get to that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Due to wrong specification of arguments to getopt_long() any
attempt to set pidfile resulted in:
1) the default to be leaked
2) the @pidfile variable to be set to NULL (because optarg is
NULL without this patch).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Message-Id: <6f10cd53d361a395aa0e85a9311ec4e9a8fc11e5.1521868451.git.mprivozn@redhat.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since commit 67a1de0d19 there is no space anymore between the
version number and the parentheses when running configure with
--with-pkgversion=foo :
$ qemu-system-s390x --version
QEMU emulator version 2.11.50(foo)
But the space is included when building without that option
when building from a git checkout:
$ qemu-system-s390x --version
QEMU emulator version 2.11.50 (v2.11.0-1494-gbec9c64-dirty)
The same confusion exists with the "query-version" QMP command.
Let's fix this by introducing a proper QEMU_FULL_VERSION definition
that includes the space and parentheses, while the QEMU_PKGVERSION
should just cleanly contain the package version string itself.
Note that this also changes the behavior of the "query-version" QMP
command (the space and parentheses are not included there anymore),
but that's supposed to be OK since the strings there are not meant
to be parsed by other tools.
Fixes: 67a1de0d19
Buglink: https://bugs.launchpad.net/qemu/+bug/1673373
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1518692807-25859-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes, with the change
to target/s390x/gen-features.c manually reverted, and blank lines
around deletions collapsed.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-3-armbru@redhat.com>
scsi_disk_emulate_command passes in_buf == NULL when sent a REQUEST
SENSE command. Check for in_len == 0 before dereferencing in_buf.
Fixes: f68d98b21f
Reported-by: Roman Kagan <rkagan@virtuozzo.com>
Tested-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sense keys have nice #defines in scsi/constants.h, use them.
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Extract the common parts of scsi_sense_buf_to_errno, scsi_convert_sense
and scsi_target_send_command's REQUEST SENSE handling into two new
functions scsi_parse_sense_buf and scsi_build_sense_buf.
Fix a bug in scsi_target_send_command along the way; the length was
written in buf[10] rather than buf[7].
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixes: b07fbce634 ("scsi-bus: correct responses for INQUIRY and REQUEST SENSE")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
1) Return a generic sense if TEST UNIT READY does not provide one;
2) Fix two mistakes in copying from the spec.
Cc: qemu-stable@nongnu.org
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
libmultipath has recently changed its API. The new API supports multi-threaded
clients better. Unfortunately there is no backwards-compatibility, so we just
switch to the new one. Running QEMU compiled with the new library on the old
library will likely crash, while doing the opposite will cause QEMU not to
start at all (because udev, get_multipath_config and put_multipath_config
are undefined).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Proper support of persistent reservation for multipath devices requires
communication with the multipath daemon, so that the reservation is
registered and applied when a path comes up. The device mapper
utilities provide a library to do so; this patch makes qemu-pr-helper.c
detect multipath devices and, when one is found, delegate the operation
to libmpathpersist.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce a privileged helper to run persistent reservation commands.
This lets virtual machines send persistent reservations without using
CAP_SYS_RAWIO or out-of-tree patches. The helper uses Unix permissions
and SCM_RIGHTS to restrict access to processes that can access its socket
and prove that they have an open file descriptor for a raw SCSI device.
The next patch will also correct the usage of persistent reservations
with multipath devices.
It would also be possible to support for Linux's IOC_PR_* ioctls in
the future, to support NVMe devices. For now, however, only SCSI is
supported.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is a common requirement for virtual machine to send persistent
reservations, but this currently requires either running QEMU with
CAP_SYS_RAWIO, or using out-of-tree patches that let an unprivileged
QEMU bypass Linux's filter on SG_IO commands.
As an alternative mechanism, the next patches will introduce a
privileged helper to run persistent reservation commands without
expanding QEMU's attack surface unnecessarily.
The helper is invoked through a "pr-manager" QOM object, to which
file-posix.c passes SG_IO requests for PERSISTENT RESERVE OUT and
PERSISTENT RESERVE IN commands. For example:
$ qemu-system-x86_64
-device virtio-scsi \
-object pr-manager-helper,id=helper0,path=/var/run/qemu-pr-helper.sock
-drive if=none,id=hd,driver=raw,file.filename=/dev/sdb,file.pr-manager=helper0
-device scsi-block,drive=hd
or:
$ qemu-system-x86_64
-device virtio-scsi \
-object pr-manager-helper,id=helper0,path=/var/run/qemu-pr-helper.sock
-blockdev node-name=hd,driver=raw,file.driver=host_device,file.filename=/dev/sdb,file.pr-manager=helper0
-device scsi-block,drive=hd
Multiple pr-manager implementations are conceivable and possible, though
only one is implemented right now. For example, a pr-manager could:
- talk directly to the multipath daemon from a privileged QEMU
(i.e. QEMU links to libmpathpersist); this makes reservation work
properly with multipath, but still requires CAP_SYS_RAWIO
- use the Linux IOC_PR_* ioctls (they require CAP_SYS_ADMIN though)
- more interestingly, implement reservations directly in QEMU
through file system locks or a shared database (e.g. sqlite)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Complete the transition by renaming this header, which was
shared by block/iscsi.c and the SCSI emulation code.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move more knowledge of SG_IO out of hw/scsi/scsi-generic.c, for
reusability.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move more knowledge of sense data format out of hw/scsi/scsi-bus.c
for reusability.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
util/scsi.c includes some SCSI code that is shared by block/iscsi.c and
hw/scsi, but the introduction of the persistent reservation helper
will add many more instances of this. There is also include/block/scsi.h,
which actually is not part of the core block layer.
The persistent reservation manager will also need a home. A scsi/
directory provides one for both the aforementioned shared code and
the PR manager code.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
