Eric noticed while attempting to enable the vhost-user-blk-test for
Aarch64 that that things didn't work unless he put in a dummy
guest_malloc() at the start of the test. Without it
qvirtio_wait_used_elem() would assert when it reads a junk value for
idx resulting in:
qvirtqueue_get_buf: idx:2401 last_idx:0
qvirtqueue_get_buf: 0x7ffcb6d3fe74, (nil)
qvirtio_wait_used_elem: 3000000/0
ERROR:../../tests/qtest/libqos/virtio.c:226:qvirtio_wait_used_elem: assertion failed (got_desc_idx == desc_idx): (50331648 == 0)
Bail out! ERROR:../../tests/qtest/libqos/virtio.c:226:qvirtio_wait_used_elem: assertion failed (got_desc_idx == desc_idx): (50331648 == 0)
What was actually happening is the guest_malloc() effectively pushed
the allocation of the vring into the next page which just happened to
have clear memory. After much tedious tracing of the code I could see
that qvring_init() does attempt initialise a bunch of the vring
structures but skips the vring->used.idx value. It is probably not
wise to assume guest memory is zeroed anyway. Once the ring is
properly initialised the hack is no longer needed to get things
working.
Thanks-to: John Snow <jsnow@redhat.com> for helping debug
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220406173356.1891500-1-alex.bennee@linaro.org>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The fuzz tests are currently scheduled for all targets, but their setup
code limits the run to "i386", so that these tests always show "SKIP"
on other targets. Move it to the right x86 list in meson.build, then
we can drop the architecture check during runtime, too.
Message-Id: <20220414130127.719528-1-thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Allow the same set of tests for all MIPS targets, so that "mipsel"
now gets some additional test coverage, too. While we're at it,
simplify the definitions for qtests_mips64 and qtests_mips64el.
Message-Id: <20220414114655.604391-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Replace a config-time define with a compile time condition
define (compatible with clang and gcc) that must be declared prior to
its usage. This avoids having a global configure time define, but also
prevents from bad usage, if the config header wasn't included before.
This can help to make some code independent from qemu too.
gcc supports __BYTE_ORDER__ from about 4.6 and clang from 3.2.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[ For the s390x parts I'm involved in ]
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the migration is over before we cancel it, we are
waiting in a loop a state that never comes because the state
is already "completed".
To avoid an infinite loop, skip the test if the migration
is "completed" before we were able to cancel it.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-id: 20220329124259.355995-1-lvivier@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
One less qemu-specific macro. It also helps to make some headers/units
only depend on glib, and thus moved in standalone projects eventually.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
The socket API wrappers were initially introduced in commit
00aa0040 ("Wrap recv to avoid warnings"), but made redundant with
commit a2d96af4 ("osdep: add wrappers for socket functions") which fixes
the win32 declarations and thus removed the earlier warnings.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
This commit only touches allocations with size arguments of the form
sizeof(T).
Initial patch created mechanically with:
$ spatch --in-place --sp-file scripts/coccinelle/use-g_new-etc.cocci \
--macro-file scripts/cocci-macro-file.h FILES...
This uncovers a typing error:
../hw/9pfs/9p.c: In function ‘qid_path_fullmap’:
../hw/9pfs/9p.c:855:13: error: assignment to ‘QpfEntry *’ from incompatible pointer type ‘QppEntry *’ [-Werror=incompatible-pointer-types]
855 | val = g_new0(QppEntry, 1);
| ^
Harmless, because QppEntry is larger than QpfEntry. Manually fixed to
allocate a QpfEntry instead.
Cc: Greg Kurz <groug@kaod.org>
Cc: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20220315144156.1595462-3-armbru@redhat.com>
Include the qtest reproducer provided by Alexander Bulekov
in https://gitlab.com/qemu-project/qemu/-/issues/451. Without
the previous commit, we get:
$ make check-qtest-i386
...
Running test qtest-i386/fuzz-sdcard-test
==447470==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x61500002a080 at pc 0x564c71766d48 bp 0x7ffc126c62b0 sp 0x7ffc126c62a8
READ of size 1 at 0x61500002a080 thread T0
#0 0x564c71766d47 in sdhci_read_dataport hw/sd/sdhci.c:474:18
#1 0x564c7175f139 in sdhci_read hw/sd/sdhci.c:1022:19
#2 0x564c721b937b in memory_region_read_accessor softmmu/memory.c:440:11
#3 0x564c72171e51 in access_with_adjusted_size softmmu/memory.c:554:18
#4 0x564c7216f47c in memory_region_dispatch_read1 softmmu/memory.c:1424:16
#5 0x564c7216ebb9 in memory_region_dispatch_read softmmu/memory.c:1452:9
#6 0x564c7212db5d in flatview_read_continue softmmu/physmem.c:2879:23
#7 0x564c7212f958 in flatview_read softmmu/physmem.c:2921:12
#8 0x564c7212f418 in address_space_read_full softmmu/physmem.c:2934:18
#9 0x564c721305a9 in address_space_rw softmmu/physmem.c:2962:16
#10 0x564c7175a392 in dma_memory_rw_relaxed include/sysemu/dma.h:89:12
#11 0x564c7175a0ea in dma_memory_rw include/sysemu/dma.h:132:12
#12 0x564c71759684 in dma_memory_read include/sysemu/dma.h:152:12
#13 0x564c7175518c in sdhci_do_adma hw/sd/sdhci.c:823:27
#14 0x564c7174bf69 in sdhci_data_transfer hw/sd/sdhci.c:935:13
#15 0x564c7176aaa7 in sdhci_send_command hw/sd/sdhci.c:376:9
#16 0x564c717629ee in sdhci_write hw/sd/sdhci.c:1212:9
#17 0x564c72172513 in memory_region_write_accessor softmmu/memory.c:492:5
#18 0x564c72171e51 in access_with_adjusted_size softmmu/memory.c:554:18
#19 0x564c72170766 in memory_region_dispatch_write softmmu/memory.c:1504:16
#20 0x564c721419ee in flatview_write_continue softmmu/physmem.c:2812:23
#21 0x564c721301eb in flatview_write softmmu/physmem.c:2854:12
#22 0x564c7212fca8 in address_space_write softmmu/physmem.c:2950:18
#23 0x564c721d9a53 in qtest_process_command softmmu/qtest.c:727:9
0x61500002a080 is located 0 bytes to the right of 512-byte region [0x615000029e80,0x61500002a080)
allocated by thread T0 here:
#0 0x564c708e1737 in __interceptor_calloc (qemu-system-i386+0x1e6a737)
#1 0x7ff05567b5e0 in g_malloc0 (/lib64/libglib-2.0.so.0+0x5a5e0)
#2 0x564c71774adb in sdhci_pci_realize hw/sd/sdhci-pci.c:36:5
SUMMARY: AddressSanitizer: heap-buffer-overflow hw/sd/sdhci.c:474:18 in sdhci_read_dataport
Shadow bytes around the buggy address:
0x0c2a7fffd3c0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c2a7fffd3d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0c2a7fffd3e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0c2a7fffd3f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0c2a7fffd400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
=>0x0c2a7fffd410:[fa]fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c2a7fffd420: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
0x0c2a7fffd430: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
0x0c2a7fffd440: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
0x0c2a7fffd450: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
0x0c2a7fffd460: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
Shadow byte legend (one shadow byte represents 8 application bytes):
Addressable: 00
Heap left redzone: fa
Freed heap region: fd
==447470==ABORTING
Broken pipe
ERROR qtest-i386/fuzz-sdcard-test - too few tests run (expected 3, got 2)
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211215205656.488940-4-philmd@redhat.com>
[thuth: Replaced "-m 4G" with "-m 512M"]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Include the qtest reproducer provided by Alexander Bulekov
in https://gitlab.com/qemu-project/qemu/-/issues/542.
Without the previous commit, we get:
$ make check-qtest-i386
...
Running test tests/qtest/intel-hda-test
AddressSanitizer:DEADLYSIGNAL
=================================================================
==1580408==ERROR: AddressSanitizer: stack-overflow on address 0x7ffc3d566fe0
#0 0x63d297cf in address_space_translate_internal softmmu/physmem.c:356
#1 0x63d27260 in flatview_do_translate softmmu/physmem.c:499:15
#2 0x63d27af5 in flatview_translate softmmu/physmem.c:565:15
#3 0x63d4ce84 in flatview_write softmmu/physmem.c:2850:10
#4 0x63d4cb18 in address_space_write softmmu/physmem.c:2950:18
#5 0x63d4d387 in address_space_rw softmmu/physmem.c:2960:16
#6 0x62ae12f2 in dma_memory_rw_relaxed include/sysemu/dma.h:89:12
#7 0x62ae104a in dma_memory_rw include/sysemu/dma.h:132:12
#8 0x62ae6157 in dma_memory_write include/sysemu/dma.h:173:12
#9 0x62ae5ec0 in stl_le_dma include/sysemu/dma.h:275:1
#10 0x62ae5ba2 in stl_le_pci_dma include/hw/pci/pci.h:871:1
#11 0x62ad59a6 in intel_hda_response hw/audio/intel-hda.c:372:12
#12 0x62ad2afb in hda_codec_response hw/audio/intel-hda.c:107:5
#13 0x62aec4e1 in hda_audio_command hw/audio/hda-codec.c:655:5
#14 0x62ae05d9 in intel_hda_send_command hw/audio/intel-hda.c:307:5
#15 0x62adff54 in intel_hda_corb_run hw/audio/intel-hda.c:342:9
#16 0x62adc13b in intel_hda_set_corb_wp hw/audio/intel-hda.c:548:5
#17 0x62ae5942 in intel_hda_reg_write hw/audio/intel-hda.c:977:9
#18 0x62ada10a in intel_hda_mmio_write hw/audio/intel-hda.c:1054:5
#19 0x63d8f383 in memory_region_write_accessor softmmu/memory.c:492:5
#20 0x63d8ecc1 in access_with_adjusted_size softmmu/memory.c:554:18
#21 0x63d8d5d6 in memory_region_dispatch_write softmmu/memory.c:1504:16
#22 0x63d5e85e in flatview_write_continue softmmu/physmem.c:2812:23
#23 0x63d4d05b in flatview_write softmmu/physmem.c:2854:12
#24 0x63d4cb18 in address_space_write softmmu/physmem.c:2950:18
#25 0x63d4d387 in address_space_rw softmmu/physmem.c:2960:16
#26 0x62ae12f2 in dma_memory_rw_relaxed include/sysemu/dma.h:89:12
#27 0x62ae104a in dma_memory_rw include/sysemu/dma.h:132:12
#28 0x62ae6157 in dma_memory_write include/sysemu/dma.h:173:12
#29 0x62ae5ec0 in stl_le_dma include/sysemu/dma.h:275:1
#30 0x62ae5ba2 in stl_le_pci_dma include/hw/pci/pci.h:871:1
#31 0x62ad59a6 in intel_hda_response hw/audio/intel-hda.c:372:12
#32 0x62ad2afb in hda_codec_response hw/audio/intel-hda.c:107:5
#33 0x62aec4e1 in hda_audio_command hw/audio/hda-codec.c:655:5
#34 0x62ae05d9 in intel_hda_send_command hw/audio/intel-hda.c:307:5
#35 0x62adff54 in intel_hda_corb_run hw/audio/intel-hda.c:342:9
#36 0x62adc13b in intel_hda_set_corb_wp hw/audio/intel-hda.c:548:5
#37 0x62ae5942 in intel_hda_reg_write hw/audio/intel-hda.c:977:9
#38 0x62ada10a in intel_hda_mmio_write hw/audio/intel-hda.c:1054:5
#39 0x63d8f383 in memory_region_write_accessor softmmu/memory.c:492:5
#40 0x63d8ecc1 in access_with_adjusted_size softmmu/memory.c:554:18
#41 0x63d8d5d6 in memory_region_dispatch_write softmmu/memory.c:1504:16
#42 0x63d5e85e in flatview_write_continue softmmu/physmem.c:2812:23
#43 0x63d4d05b in flatview_write softmmu/physmem.c:2854:12
#44 0x63d4cb18 in address_space_write softmmu/physmem.c:2950:18
#45 0x63d4d387 in address_space_rw softmmu/physmem.c:2960:16
#46 0x62ae12f2 in dma_memory_rw_relaxed include/sysemu/dma.h:89:12
#47 0x62ae104a in dma_memory_rw include/sysemu/dma.h:132:12
#48 0x62ae6157 in dma_memory_write include/sysemu/dma.h:173:12
...
SUMMARY: AddressSanitizer: stack-overflow softmmu/physmem.c:356 in address_space_translate_internal
==1580408==ABORTING
Broken pipe
Aborted (core dumped)
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211218160912.1591633-4-philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
'boot-serial-test' does not work with a QEMU built with --disable-tcg in
a IBM POWER9 host. The reason is that without TCG QEMU will default to
KVM acceleration, but then the KVM module in IBM POWER hosts aren't able
to handle other CPUs.
The result is that the test will break with a KVM error when trying to
ruin the ppce500 test:
$ QTEST_QEMU_BINARY=./qemu-system-ppc64 ./tests/qtest/boot-serial-test
/ppc64/boot-serial/ppce500: qemu-system-ppc64: -accel tcg: invalid accelerator tcg
error: kvm run failed Invalid argument
NIP 0000000000f00000 LR 0000000000000000 CTR 0000000000000000 XER 0000000000000000 CPU#0
MSR 0000000000000000 HID0 0000000000000000 HF 24020002 iidx 1 didx 1
TB 00000000 00000000 DECR 0
(...)
** (./tests/qtest/boot-serial-test:1935760): ERROR **: 07:44:03.010: Failed to find expected string. Please check '/tmp/qtest-boot-serial-sJ78sqg'
Fix it by checking CONFIG_TCG before compiling boot-serial-test.
Cc: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220303153517.168943-3-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
'prom-env-test' is a TCG test that will fail if QEMU is compiled with
--disable-tcg:
$ QTEST_QEMU_BINARY=./qemu-system-ppc64 ./tests/qtest/prom-env-test
/ppc64/prom-env/mac99: qemu-system-ppc64: -accel tcg: invalid accelerator tcg
(... hangs indefinitely ...)
Fix it by checking CONFIG_TCG before compiling prom-env-test.
Cc: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220303153517.168943-2-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
vhost-user enabled on non-linux systems
beginning of nvme sriov support
bigger tx queue for vdpa
virtio iommu bypass
FADT flag to detect legacy keyboards
Fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmImipMPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpD5AH/jz73VVDE3dZTtsdEH/f2tuO8uosur9fIjHJ
nCMwBoosdDWmrWjrwxynmG6e+qIcOHEGdTInvS1TY2OTU+elNNTiR57pWiljXRsJ
2kNIXKp4dXaYI/bxmKUzKSoVscyWxL686ND4U8sZhuppSNrWpLmMUNgwqmYjQQLV
yd2JpIKgZYnzShPnJMDtF3ItcCHetY6jeB28WAclKywIEuCTmjulYCTaH5ujroG9
rykMaQIjoe/isdmCcBx05UuMxH61vf5L8pR06N6e3GO9T2/Y/hWuteVoEJaCQvNa
+zIyL2hOjGuMKr+icLo9c42s3yfwWNsRfz87wqdAY47yYSyc1wo=
=3NVe
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio,pc,pci: features, cleanups, fixes
vhost-user enabled on non-linux systems
beginning of nvme sriov support
bigger tx queue for vdpa
virtio iommu bypass
FADT flag to detect legacy keyboards
Fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 07 Mar 2022 22:43:31 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (47 commits)
hw/acpi/microvm: turn on 8042 bit in FADT boot architecture flags if present
tests/acpi: i386: update FACP table differences
hw/acpi: add indication for i8042 in IA-PC boot flags of the FADT table
tests/acpi: i386: allow FACP acpi table changes
docs: vhost-user: add subsection for non-Linux platforms
configure, meson: allow enabling vhost-user on all POSIX systems
vhost: use wfd on functions setting vring call fd
event_notifier: add event_notifier_get_wfd()
pci: drop COMPAT_PROP_PCP for 2.0 machine types
hw/smbios: Add table 4 parameter, "processor-id"
x86: cleanup unused compat_apic_id_mode
vhost-vsock: detach the virqueue element in case of error
pc: add option to disable PS/2 mouse/keyboard
acpi: pcihp: pcie: set power on cap on parent slot
pci: expose TYPE_XIO3130_DOWNSTREAM name
pci: show id info when pci BDF conflict
hw/misc/pvpanic: Use standard headers instead
headers: Add pvpanic.h
pci-bridge/xio3130_downstream: Fix error handling
pci-bridge/xio3130_upstream: Fix error handling
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# docs/specs/index.rst
The Renesas RAA229004 is a PMBus Multiphase Voltage Regulator
Signed-off-by: Titus Rwantare <titusr@google.com>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Message-Id: <20220307200605.4001451-9-titusr@google.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The previous test depended on the assumption that P9_DOTL_AT_REMOVEDIR
and AT_REMOVEDIR have the same value.
While this is true on Linux, it is not true everywhere, and leads to an
incorrect test failure on unlink_at, noticed when adding 9p to darwin:
Received response 7 (RLERROR) instead of 77 (RUNLINKAT)
Rlerror has errno 22 (Invalid argument)
**
ERROR:../tests/qtest/virtio-9p-test.c:305:v9fs_req_recv: assertion
failed (hdr.id == id): (7 == 77) Bail out!
ERROR:../tests/qtest/virtio-9p-test.c:305:v9fs_req_recv: assertion
failed (hdr.id == id): (7 == 77)
Signed-off-by: Fabian Franz <fabianfranz.oss@gmail.com>
[Will Cohen: - Add explanation of patch and description
of pre-patch test failure]
Signed-off-by: Will Cohen <wwcohen@gmail.com>
Acked-by: Thomas Huth <thuth@redhat.com>
[Will Cohen: - Move this patch before 9p: darwin: meson
patch to avoid qtest breakage during
bisecting]
Signed-off-by: Will Cohen <wwcohen@gmail.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20220227223522.91937-11-wwcohen@gmail.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
The FACP table is going to be changed for x86/q35 machines. To be sure
the following changes are not breaking any QEMU test this change follows
step 2 from the bios-tables-test.c guide on changes that affect ACPI
tables.
Signed-off-by: Liav Albani <liavalb@gmail.com>
Acked-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20220304154032.2071585-2-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The bypass config field should be initialized to 1 by default.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-Id: <20220214124356.872985-5-jean-philippe@linaro.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
test_migrate_start() will release the MigrateStart structure that passed
in, however that's not super clear to the caller because after the call
returned the pointer can still be referenced by the callers. It can easily
be a source of use-after-free.
Let's pass in a double pointer of that, then we can safely clear the
pointer for the caller after the struct is released.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220301083925.33483-26-peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
dgilbert: Fixup apply since I didn't take 24/25
Test abort during active migration when failover is disabled from QEMU
or from guest side.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20220203141537.972317-8-lvivier@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The primary device is not plugged and the migration is done only with
the standby device
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20220203141537.972317-7-lvivier@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If failover is off, the primary device is not plugged and
the migration is done only with the standby device.
On destination, the primary device must not be plugged.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20220203141537.972317-6-lvivier@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If QEMU provides the VIRTIO_NET_F_STANDBY feature but the guest doesn't
the primary device must be kept hidden
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20220203141537.972317-5-lvivier@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Check QEMU provides the VIRTIO_NET_F_STANDBY if failover is on,
and doesn't if failover is off
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20220203141537.972317-4-lvivier@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This allows g_assert() to correctly report the line number of the error
in the test case.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20220203141537.972317-3-lvivier@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The retry_isa test is not doing what it was intended for: The
test_retry_flush() function ignores the machine parameter completely
and thus this test does not get run with the "isapc" machine.
Moreover, in the course of time, the test_retry_flush() has been
changed to depend on PCI-related functions, so this also cannot
be fixed by simply using the machine parameter now. The correct
fix would be to switch the whole test to libqos, but until someone
has time to do this, let's simply drop the retry_isa test for now.
Message-Id: <20220121120635.220644-1-thuth@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
-netdev vhost-user,vhostforce is deprecated and vhostforce=on
should be used instead.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220210145254.157790-2-eric.auger@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The way to print uint64_t is with PRIx64, not with
a cast to long long.
Message-Id: <20220206093547.1282513-1-mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Hotplug tests need a bridge setting up on q35, for now
keep them on 'pc'.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220215162537.605030-3-dgilbert@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
For tests that rely on old hardware, e.g. floppies or IDE drives,
explicitly select the 'pc' machine type.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220215162537.605030-2-dgilbert@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It is recommended to use g_autofree or g_autoptr as it reduces
the odds of introducing memory leaks in future changes.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20220201151508.190035-3-groug@kaod.org>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
local_test_path is allocated in virtio_9p_create_local_test_dir() to hold the path
of the temporary directory. It should be freed in virtio_9p_remove_local_test_dir()
when the temporary directory is removed. Clarify the lifecycle of local_test_path
while here.
Based-on: <f6602123c6f7d0d593466231b04fba087817abbd.1642879848.git.qemu_oss@crudebyte.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20220201151508.190035-2-groug@kaod.org>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
The 9p test cases use mkdtemp() to create a temporary directory for
running the 'local' 9p tests with real files/dirs. Unlike mktemp()
which only generates a unique file name, mkdtemp() also creates the
directory, therefore the subsequent mkdir() was wrong and caused
errors on some systems.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Fixes: 136b7af2 (tests/9pfs: fix test dir for parallel tests)
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/832
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Greg Kurz <Greg Kurz <groug@kaod.org>
Message-Id: <f6602123c6f7d0d593466231b04fba087817abbd.1642879848.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <E1mn1fA-0005qZ-TM@lizzy.crudebyte.com>
If this starts causing failures again we should probably fix that.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220204204335.1689602-3-alex.bennee@linaro.org>
This commit adds emulation of the magnetometer on the LSM303DLHC.
It allows the magnetometer's X, Y and Z outputs to be set via the
mag-x, mag-y and mag-z properties, as well as the 12-bit
temperature output via the temperature property. Sensor can be
enabled with 'CONFIG_LSM303DLHC_MAG=y'.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
Message-id: 20220130095032.35392-1-kevin.townsend@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This change implements the test suite checks for the ERST table.
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <1643402289-22216-10-git-send-email-eric.devolder@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This change provides a qtest that locates and then does a simple
interrogation of the ERST feature within the guest.
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <1643402289-22216-9-git-send-email-eric.devolder@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Following the guidelines in tests/qtest/bios-tables-test.c, this
change adds empty placeholder files per step 1 for the new ERST
table, and excludes resulting changed files in bios-tables-test-allowed-diff.h
per step 2.
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1643402289-22216-2-git-send-email-eric.devolder@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Previous patch [1] added explicit whitespace padding to OEM_ID/OEM_TABLE_ID
values used in test_oem_fields() testcase to avoid false positive and
bisection issues when QEMU is switched to \0' padding. As result
testcase ceased to test values that were shorter than max possible
length values.
Update testcase to make sure that it's testing shorter IDs like it
used to before [2].
1) "tests: acpi: manually pad OEM_ID/OEM_TABLE_ID for test_oem_fields() test"
2) 602b458201 ("acpi: Permit OEM ID and OEM table ID fields to be changed")
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220114142641.1727679-1-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
