bitmap_to_extents function is broken: it switches dirty variable after
every iteration, however it can process only part of dirty (or zero)
area during one iteration in case when this area is too large for one
extent.
Fortunately, the bug doesn't produce wrong extent flags: it just inserts
a zero-length extent between sequential extents representing large dirty
(or zero) area. However, zero-length extents are forbidden by the NBD
protocol. So, a careful client should consider such a reply as a server
fault, while a less-careful will likely ignore zero-length extents.
The bug can only be triggered by a client that requests block status
for nearly 4G at once (a request of 4G and larger is impossible per
the protocol, and requests smaller than 4G less the bitmap granularity
cause the loop to quit iterating rather than revisit the tail of the
large area); it also cannot trigger if the client used the
NBD_CMD_FLAG_REQ_ONE flag. Since qemu 3.0 as client (using the
x-dirty-bitmap extension) always passes the flag, it is immune; and
we are not aware of other open-source clients that know how to request
qemu:dirty-bitmap:FOO contexts. Clients that want to avoid the bug
could cap block status requests to a smaller length, such as 2G or 3G.
Fix this by more careful handling of dirty variable.
Bug was introduced in 3d068aff16
"nbd/server: implement dirty bitmap export", with the whole function.
and is present in v3.0.0 release.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180914165116.23182-1-vsementsov@virtuozzo.com>
CC: qemu-stable@nongnu.org
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: improved commit message]
Signed-off-by: Eric Blake <eblake@redhat.com>
Call nbd_co_send_extents() with correct length parameter
(extent.length may be smaller than original length).
Also, switch length parameter type to uint32_t, to correspond with
request->len and similar nbd_co_send_bitmap().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180704112302.471456-2-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
In order to test that the NBD server is properly advertising
dirty bitmaps, we need a bare minimum client that can request
and read the context. Since feature freeze for 3.0 is imminent,
this is the smallest workable patch, which replaces the qemu
block status report with the results of the NBD server's dirty
bitmap (making it very easy to use 'qemu-img map --output=json'
to learn where the dirty portions are). Note that the NBD
protocol defines a dirty section with the same bit but opposite
sense that normal "base:allocation" uses to report an allocated
section; so in qemu-img map output, "data":true corresponds to
clean, "data":false corresponds to dirty.
A more complete solution that allows dirty bitmaps to be queried
at the same time as normal block status will be required before
this addition can lose the x- prefix. Until then, the fact that
this replaces normal status with dirty status means actions
like 'qemu-img convert' will likely misbehave due to treating
dirty regions of the file as if they are unallocated.
The next patch adds an iotest to exercise this new code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180702191458.28741-2-eblake@redhat.com>
In my hurry to fix a build failure, I introduced a logic bug.
The assertion conditional is backwards, meaning that qemu will
now abort instead of reporting dirty bitmap status.
The bug can only be tickled by an NBD client using an exported
dirty bitmap (which is still an experimental QMP command), so
it's not the end of the world for supported usage (and neither
'make check' nor qemu-iotests fails); but it also shows that we
really want qemu-io support for reading dirty bitmaps if only
so that I can add iotests coverage to prevent future
brown-bag-of-shame events like this one.
Fixes: 45eb6fb6
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180622153509.375130-1-eblake@redhat.com>
The code has a while() loop that always initialized 'end', and
the loop always executes at least once (as evidenced by the assert()
just prior to the loop). But some versions of gcc still complain
that 'end' is used uninitialized, so silence them.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180622125814.345274-1-eblake@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Handle nbd CACHE command. Just do read, without sending read data back.
Cache mechanism should be done by exported node driver chain.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180413143156.11409-1-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: fix two missing case labels in switch statements]
Signed-off-by: Eric Blake <eblake@redhat.com>
Handle a new NBD meta namespace: "qemu", and corresponding queries:
"qemu:dirty-bitmap:<export bitmap name>".
With the new metadata context negotiated, BLOCK_STATUS query will reply
with dirty-bitmap data, converted to extents. The new public function
nbd_export_bitmap selects which bitmap to export. For now, only one bitmap
may be exported.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180609151758.17343-5-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: wording tweaks, minor cleanups, additional tracing]
Signed-off-by: Eric Blake <eblake@redhat.com>
Add nbd_meta_pattern() and nbd_meta_empty_or_pattern() helpers for
metadata query parsing. nbd_meta_pattern() will be reused for the
"qemu" namespace in following patches.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180609151758.17343-4-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: comment tweaks]
Signed-off-by: Eric Blake <eblake@redhat.com>
Use NBDExport pointer instead of just export name: there is no need to
store a duplicated name in the struct; moreover, NBDExport will be used
further.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180609151758.17343-3-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: commit message grammar tweak]
Signed-off-by: Eric Blake <eblake@redhat.com>
Return code = 1 doesn't mean that we parsed base:allocation. Use
correct traces in both -parsed and -skipped cases.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180609151758.17343-2-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: comment tweaks]
Signed-off-by: Eric Blake <eblake@redhat.com>
The NBD spec says that behavior is unspecified if the client
requests 0 length for block status; but since the structured
reply is documenting as returning a non-zero length, it's
easier to just diagnose this with an EINVAL error than to
figure out what to return.
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180621124937.166549-1-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
A missing space makes for poor error messages, and sizes can't
go negative. Also, we missed diagnosing a server that sends
a maximum block size less than the minimum.
Fixes: 081dd1fe
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180501154654.943782-1-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Initialize received variable. Otherwise, is is possible for server to
answer without any contexts, but we will set context_id to something
random (received_id is not initialized too) and return 1, which is
wrong.
To solve it, just initialize received to false. Initialize received_id
too, just to make all possible checkers happy.
Bug was introduced in 78a33ab587 "nbd: BLOCK_STATUS for
standard get_block_status function: client part" with the whole
function.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180427142002.21930-2-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Having a more detailed log of the interaction between client and
server is invaluable in debugging how meta context negotiation
actually works.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180330130950.1931229-1-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
It's never a good idea to blindly read for size bytes as
returned by the server without first validating that the size
is within bounds; a malicious or buggy server could cause us
to hang or get out of sync from reading further messages.
It may be smarter to try and teach the client to cope with
unexpected context ids by silently ignoring them instead of
hanging up on the server, but for now, if the server doesn't
reply with exactly the one context we expect, it's easier to
just give up - however, if we give up for any reason other
than an I/O failure, we might as well try to politely tell
the server we are quitting rather than continuing.
Fix some typos in the process.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180329231837.1914680-1-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Minimal realization: only one extent in server answer is supported.
Flag NBD_CMD_FLAG_REQ_ONE is used to force this behavior.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180312152126.286890-6-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweaks, fix min_block check and 32-bit cap, use -1
instead of errno on failure in nbd_negotiate_simple_meta_context,
ensure that block status makes progress on success]
Signed-off-by: Eric Blake <eblake@redhat.com>
Minimal realization: only one extent in server answer is supported.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180312152126.286890-4-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: tweak whitespace, move constant from .h to .c, improve
logic of check_meta_export_name, simplify nbd_negotiate_options
by doing more in nbd_negotiate_meta_queries]
Signed-off-by: Eric Blake <eblake@redhat.com>
Add helper to read name in format:
uint32 len (<= NBD_MAX_NAME_SIZE)
len bytes string (not 0-terminated)
The helper will be reused in following patch.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180312152126.286890-3-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar fixes, actually check error]
Signed-off-by: Eric Blake <eblake@redhat.com>
NBD_REP_ERR_INVALID is often parameter to nbd_opt_drop and it would
be used more in following patches. So, let's add a helper.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180312152126.286890-2-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The NBD spec states that since trim requests can affect disk contents,
then they should allow for FUA semantics just like writes for ensuring
the disk has settled before returning. As bdrv_[co_]pdiscard() does
not support a flags argument, we can't pass FUA down the block layer
stack, and must therefore emulate it with a flush at the NBD layer.
Note that in all reality, generic well-behaved clients will never
send TRIM+FUA (in fact, qemu as a client never does, and we have no
intention to plumb flags into bdrv_pdiscard). This is because the
NBD protocol states that it is unspecified to READ a trimmed area
(you might read stale data, all zeroes, or even random unrelated
data) without first rewriting it, and even the experimental
BLOCK_STATUS extension states that TRIM need not affect reported
status. Thus, in the general case, a client cannot tell the
difference between an arbitrary server that ignores TRIM, a server
that had a power outage without flushing to disk, and a server that
actually affected the disk before returning; so waiting for the
trim actions to flush to disk makes little sense. However, for a
specific client and server pair, where the client knows the server
treats TRIM'd areas as guaranteed reads-zero, waiting for a flush
makes sense, hence why the protocol documents that FUA is valid on
trim. So, even though the NBD protocol doesn't have a way for the
server to advertise what effects (if any) TRIM will actually have,
and thus any client that relies on specific effects is probably
in error, we can at least support a client that requests TRIM+FUA.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180307225732.155835-1-eblake@redhat.com>
Split out request handling logic.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180308184636.178534-6-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: touch up blank line placement]
Signed-off-by: Eric Blake <eblake@redhat.com>
nbd_trip has difficult logic when sending replies: it tries to use one
code path for all replies. It is ok for simple replies, but is not
comfortable for structured replies. Also, two types of error (and
corresponding messages in local_err) - fatal (leading to disconnect)
and not-fatal (just to be sent to the client) are difficult to follow.
To make things a bit clearer, the following is done:
- split CMD_READ logic to separate function. It is the most difficult
command for now, and it is definitely cramped inside nbd_trip. Also,
it is difficult to follow CMD_READ logic, shared between
"case NBD_CMD_READ" and "if"s under "reply:" label.
- create separate helper function nbd_send_generic_reply() and use it
both in new nbd_do_cmd_read and for other commands in nbd_trip instead
of common code-path under "reply:" label in nbd_trip. The helper
supports an error message, so logic with local_err in nbd_trip is
simplified.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180308184636.178534-5-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweaks and blank line placement]
Signed-off-by: Eric Blake <eblake@redhat.com>
Since the unchanged code has just set client->recv_coroutine to
NULL before calling nbd_client_receive_next_request(), we are
spawning a new coroutine unconditionally, but the first thing
that coroutine will do is check for client->closing, making it
a no-op if we have already detected that the client is going
away. Furthermore, for any error other than EIO (where we
disconnect, which itself sets client->closing), if the client
has already gone away, we'll probably encounter EIO later
in the function and attempt disconnect at that point. Logically,
as soon as we know the connection is closing, there is no need
to try a likely-to-fail a response or spawn a no-op coroutine.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180308184636.178534-4-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: squash in further reordering: hoist check before spawning
next coroutine, and document rationale in commit message]
Signed-off-by: Eric Blake <eblake@redhat.com>
In case of io error in nbd_co_send_sparse_read we should not
"goto reply:", as it was a fatal error and the common behavior
is to disconnect in this case. We should not try to send the
client an additional error reply, since we already hit a
channel-io error on our previous attempt to send one.
Fix this by handling block-status error in nbd_co_send_sparse_read,
so nbd_co_send_sparse_read fails only on io error. Then just skip
common "reply:" code path in nbd_trip.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180308184636.178534-3-vsementsov@virtuozzo.com>
[eblake: grammar tweaks]
Signed-off-by: Eric Blake <eblake@redhat.com>
To be reused in nbd_co_send_sparse_read() in the following patch.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180308184636.178534-2-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
A new parameter "context" is added to qio_channel_tls_handshake() is to
allow the TLS to be run on a non-default context. Still, no functional
change.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
1. NBD_REP_ERR_INVALID is not only about length, so, make message more
general
2. hex format is not very good: it's hard to read something like
"option a (set meta context)", so switch to dec.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <1518702707-7077-6-git-send-email-vsementsov@virtuozzo.com>
[eblake: expand scope of patch: ALL uses of nbd_opt_lookup and
nbd_rep_lookup are now decimal]
Signed-off-by: Eric Blake <eblake@redhat.com>
Expose the new constants and structs that will be used by both
server and client implementations of NBD_CMD_BLOCK_STATUS (the
command is currently experimental at
https://github.com/NetworkBlockDevice/nbd/blob/extension-blockstatus/doc/proto.md
but will hopefully be stabilized soon).
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <1518702707-7077-4-git-send-email-vsementsov@virtuozzo.com>
[eblake: split from larger patch on server implementation]
Signed-off-by: Eric Blake <eblake@redhat.com>
This cleanup makes the number of objects depending on qapi/error.h
drop from 1910 (out of 4743) to 1612 in my "build everything" tree.
While there, separate #include from file comment with a blank line,
and drop a useless comment on why qemu/osdep.h is included first.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-5-armbru@redhat.com>
[Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
Add command for removing an export. It is needed for cases when we
don't want to keep the export after the operation on it was completed.
The other example is a temporary node, created with blockdev-add.
If we want to delete it we should firstly remove any corresponding
NBD export.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180119135719.24745-3-vsementsov@virtuozzo.com>
[eblake: drop dead nb_clients code]
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171122101958.17065-6-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Rather than making every callsite perform length sanity checks
and error reporting, add the helper functions nbd_opt_read()
and nbd_opt_drop() that use the length stored in the client
struct; also add an assertion that optlen is 0 before any
option (ie. any previous option was fully handled), complementing
the assertion added in an earlier patch that optlen is 0 after
all negotiation completes.
Note that the call in nbd_negotiate_handle_export_name() does
not use the new helper (in part because the server cannot
reply to NBD_OPT_EXPORT_NAME - it either succeeds or the
connection drops).
Based on patches by Vladimir Sementsov-Ogievskiy.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180110230825.18321-6-eblake@redhat.com>
This will be useful for the next patch.
Based on a patch by Vladimir Sementsov-Ogievskiy
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180110230825.18321-5-eblake@redhat.com>
When a client abruptly disconnects before we've finished reading
the name sent with NBD_OPT_EXPORT_NAME, we are better off logging
the failure as EIO (we can't communicate with the client), rather
than EINVAL (the client sent bogus data).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180110230825.18321-4-eblake@redhat.com>
Instead of passing currently negotiating option and its length to
many of negotiation functions let's just store them on NBDClient
struct to be state-variables of negotiation phase.
This unifies semantics of negotiation functions and allows
tracking changes of remaining option length in future patches.
Asssert that optlen is back to 0 after negotiation (including
old-style connections which don't negotiate), although we need
more patches before we can assert optlen is 0 between options
during negotiation.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171122101958.17065-2-vsementsov@virtuozzo.com>
[eblake: rebase, commit message tweak, assert !optlen after
negotiation completes]
Signed-off-by: Eric Blake <eblake@redhat.com>
No semantic change, but will make it easier for an upcoming patch
to refactor code without having to add forward declarations. Fix
a poor comment while at it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180110230825.18321-2-eblake@redhat.com>
Rename nbd_option and nbd_opt_reply to NBDOption and NBDOptionReply
to correspond to Qemu coding style and other structures here.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171122101958.17065-5-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This place is not obvious, nbd_export_close may theoretically reduce
refcount to 0. It may happen if someone calls nbd_export_put on named
export not through nbd_export_set_name when refcount is 1.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20171207155102.66622-2-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
If we are careful to handle 0-length read requests correctly,
we can optimize our sparse read to send the NBD_REPLY_FLAG_DONE
bit on our last OFFSET_DATA or OFFSET_HOLE chunk rather than
needing a separate chunk.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171107030912.23930-3-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
The reason that NBD added structured reply in the first place was
to allow for efficient reads of sparse files, by allowing the
reply to include chunks to quickly communicate holes to the client
without sending lots of zeroes over the wire. Time to implement
this in the server; our client can already read such data.
We can only skip holes insofar as the block layer can query them;
and only if the client is okay with a fragmented request (if a
client requests NBD_CMD_FLAG_DF and the entire read is a hole, we
could technically return a single NBD_REPLY_TYPE_OFFSET_HOLE, but
that's a fringe case not worth catering to here). Sadly, the
control flow is a bit wonkier than I would have preferred, but
it was minimally invasive to have a split in the action between
a fragmented read (handled directly where we recognize
NBD_CMD_READ with the right conditions, and sending multiple
chunks) vs. a single read (handled at the end of nbd_trip, for
both simple and structured replies, when we know there is only
one thing being read). Likewise, I didn't make any effort to
optimize the final chunk of a fragmented read to set the
NBD_REPLY_FLAG_DONE, but unconditionally send that as a separate
NBD_REPLY_TYPE_NONE.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171107030912.23930-2-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Introduced in commit f37708f6b8 (2.10). The NBD spec says a client
can request export names up to 4096 bytes in length, even though
they should not expect success on names longer than 256. However,
qemu hard-codes the limit of 256, and fails to filter out a client
that probes for a longer name; the result is a stack smash that can
potentially give an attacker arbitrary control over the qemu
process.
The smash can be easily demonstrated with this client:
$ qemu-io f raw nbd://localhost:10809/$(printf %3000d 1 | tr ' ' a)
If the qemu NBD server binary (whether the standalone qemu-nbd, or
the builtin server of QMP nbd-server-start) was compiled with
-fstack-protector-strong, the ability to exploit the stack smash
into arbitrary execution is a lot more difficult (but still
theoretically possible to a determined attacker, perhaps in
combination with other CVEs). Still, crashing a running qemu (and
losing the VM) is bad enough, even if the attacker did not obtain
full execution control.
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
The NBD spec gives us permission to abruptly disconnect on clients
that send outrageously large option requests, rather than having
to spend the time reading to the end of the option. No real
option request requires that much data anyways; and meanwhile, we
already have the practice of abruptly dropping the connection on
any client that sends NBD_CMD_WRITE with a payload larger than 32M.
For comparison, nbdkit drops the connection on any request with
more than 4096 bytes; however, that limit is probably too low
(as the NBD spec states an export name can theoretically be up
to 4096 bytes, which means a valid NBD_OPT_INFO could be even
longer) - even if qemu doesn't permit exports longer than 256
bytes.
It could be argued that a malicious client trying to get us to
read nearly 4G of data on a bad request is a form of denial of
service. In particular, if the server requires TLS, but a client
that does not know the TLS credentials sends any option (other
than NBD_OPT_STARTTLS or NBD_OPT_EXPORT_NAME) with a stated
payload of nearly 4G, then the server was keeping the connection
alive trying to read all the payload, tying up resources that it
would rather be spending on a client that can get past the TLS
handshake. Hence, this warranted a CVE.
Present since at least 2.5 when handling known options, and made
worse in 2.6 when fixing support for NBD_FLAG_C_FIXED_NEWSTYLE
to handle unknown options.
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
The NBD spec says an attempt to NBD_CMD_TRIM on a read-only
export should fail with EPERM, as a trim has the potential
to change disk contents, but we were relying on the block
layer to catch that for us, which might not always give the
right error (and even if it does, it does not let us pass
back a sane message for structured replies).
The NBD spec says an attempt to NBD_CMD_WRITE_ZEROES out of
bounds should fail with ENOSPC, not EINVAL.
Our check for u64 offset + u32 length wraparound up front is
pointless; nothing uses offset until after the second round
of sanity checks, and we can just as easily ensure there is
no wraparound by checking whether offset is in bounds (since
a disk size cannot exceed off_t which is 63 bits, adding a
32-bit number for a valid offset can't overflow). Bonus:
dropping the up-front check lets us keep the connection alive
after NBD_CMD_WRITE, whereas before we would drop the
connection (of course, any client sending a packet that would
trigger the failure is already buggy, so it's also okay to
drop the connection, but better quality-of-implementation
never hurts).
Solve all of these issues by some code motion and improved
request validation.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171115213557.3548-1-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
The NBD spec says that a server may fail any transmission request
with ESHUTDOWN when it is apparent that no further request from
the client can be successfully honored. The client is supposed
to then initiate a soft shutdown (wait for all remaining in-flight
requests to be answered, then send NBD_CMD_DISC). However, since
qemu's server never uses ESHUTDOWN errors, this code was mostly
untested since its introduction in commit b6f5d3b5.
More recently, I learned that nbdkit as the NBD server is able to
send ESHUTDOWN errors, so I finally tested this code, and noticed
that our client was special-casing ESHUTDOWN to cause a hard
shutdown (immediate disconnect, with no NBD_CMD_DISC), but only
if the server sends this error as a simple reply. Further
investigation found that commit d2febedb introduced a regression
where structured replies behave differently than simple replies -
but that the structured reply behavior is more in line with the
spec (even if we still lack code in nbd-client.c to properly quit
sending further requests). So this patch reverts the portion of
b6f5d3b5 that introduced an improper hard-disconnect special-case
at the lower level, and leaves the future enhancement of a nicer
soft-disconnect at the higher level for another day.
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171113194857.13933-1-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
When using error prepend(), it is necessary to end with a space
in the format string; otherwise, messages come out incorrectly,
such as when connecting to a socket that hangs up immediately:
can't open device nbd://localhost:10809/: Failed to read dataUnexpected end-of-file before all bytes were read
Originally botched in commit e44ed99d, then several more instances
added in the meantime.
Pre-existing and not fixed here: we are inconsistent on capitalization;
some of our messages start with lower case, and others start with upper,
although the use of error_prepend() is much nicer to read when all
fragments consistently start with lower.
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171113152424.25381-1-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
The NBD spec was recently clarified to state that a read of length 0
should not be attempted by a compliant client; but that a server must
still handle it correctly in an unspecified manner (that is, either
a successful no-op or an error reply, but not a crash) [1]. However,
it also implies that NBD_REPLY_TYPE_OFFSET_DATA must have a non-zero
payload length, but our existing code was replying with a chunk
that a picky client could reject as invalid because it was missing
a payload (our own client implementation was recently patched to be
that picky, after first fixing it to not send 0-length requests).
We are already doing successful no-ops for 0-length writes and for
non-structured reads; so for consistency, we want structured reply
reads to also be a no-op. The easiest way to do this is to return
a NBD_REPLY_TYPE_NONE chunk; this is best done via a new helper
function (especially since future patches for other structured
replies may benefit from using the same helper).
[1] https://github.com/NetworkBlockDevice/nbd/commit/ee926037
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171108215703.9295-8-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
A closer read of the NBD spec shows that a structured reply chunk
for a hole is not quite identical to the prefix of a data chunk,
because the hole has to also send a 32-bit size field. Although
we do not yet send holes, we should fix the misleading information
in our header and make it easier for a future patch to support
sparse reads. Messed up in commit bae245d1.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171108215703.9295-5-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
It's useful to know which structured reply chunk is being processed.
Missed in commit d2febedb.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171108215703.9295-4-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
namelen should be here, length is unrelated, and always 0 at this
point. Broken in introduction in commit f37708f6, but mostly
harmless (replying with '' as the name does not violate protocol,
and does not confuse qemu as the nbd client since our implementation
does not ask for the name; but might confuse some other client that
does ask for the name especially if the default export is different
than the export name being queried).
Adding an assert makes it obvious that we are not skipping any bytes
in the client's message, as well as making it obvious that we were
using the wrong variable.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
CC: qemu-stable@nongnu.org
Message-Id: <20171101154204.27146-1-vsementsov@virtuozzo.com>
[eblake: improve commit message, squash in assert addition]
Signed-off-by: Eric Blake <eblake@redhat.com>
Minimal implementation: for structured error only error_report error
message.
Note that test 83 is now more verbose, because the implementation
prints more warnings about unexpected communication errors; perhaps
future patches should tone things down by using trace messages
instead of traces, but the common case of successful communication
is no noisier than before.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171027104037.8319-13-eblake@redhat.com>
An upcoming change to block/nbd-client.c will want to read the
tail of a structured reply chunk directly from the wire. Move
this function to make it easier.
Based on a patch from Vladimir Sementsov-Ogievskiy.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20171027104037.8319-12-eblake@redhat.com>
In following patch nbd_receive_reply will be used both for simple
and structured reply header receiving.
NBDReply is altered into union of simple reply header and structured
reply chunk header, simple error translation moved to block/nbd-client
to be consistent with further structured reply error translation.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171027104037.8319-11-eblake@redhat.com>
Split out nbd_request_simple_option to be reused for structured reply
option.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171027104037.8319-10-eblake@redhat.com>
The NBD spec permits including a human-readable error string if
structured replies are in force, so we might as well send the
client the message that we logged on any error.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20171027104037.8319-9-eblake@redhat.com>
Minimal implementation of structured read: one structured reply chunk,
no segmentation.
Minimal structured error implementation: no text message.
Support DF flag, but just ignore it, as there is no segmentation any
way.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171027104037.8319-8-eblake@redhat.com>
Consolidate the response for a non-zero-length option payload
into a new function, nbd_reject_length(). This check will
also be used when introducing support for structured replies.
Note that STARTTLS response differs based on time: if the connection
is still unencrypted, we set fatal to true (a client that can't
request TLS correctly may still think that we are ready to start
the TLS handshake, so we must disconnect); while if the connection
is already encrypted, the client is sending a bogus request but
is no longer at risk of being confused by continuing the connection.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171027104037.8319-7-eblake@redhat.com>
[eblake: correct return value on STARTTLS]
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Instead of making each caller check whether a transmission error
occurred, we can sink a common error check to the end of the loop.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171027104037.8319-6-eblake@redhat.com>
[eblake: squash in compiler warning fix]
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
When the server is read-only, we were already reporting an error
message for NBD_CMD_WRITE_ZEROES, but failed to set errp for a
similar NBD_CMD_WRITE. This will matter more once structured
replies allow the server to propagate the errp information back
to the client. While at it, use an error message that makes a
bit more sense if viewed on the client side.
Note that when using qemu-io to test qemu-nbd behavior, it is
rather difficult to convince qemu-io to send protocol violations
(such as a read beyond bounds), because we have a lot of active
checking on the client side that a qemu-io request makes sense
before it ever goes over the wire to the server. The case of a
client attempting a write when the server is started as
'qemu-nbd -r' is one of the few places where we can easily test
error path handling, without having to resort to hacking in known
temporary bugs to either the server or client. [Maybe we want a
future patch to the client to do up-front checking on writes to a
read-only export, the way it does up-front bounds checking; but I
don't see anything in the NBD spec that points to a protocol
violation in our current behavior.]
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20171027104037.8319-5-eblake@redhat.com>
Upcoming patches will implement the NBD structured reply
extension [1] for both client and server roles. Declare the
constants, structs, and lookup routines that will be valuable
whether the server or client code is backported in isolation.
This includes moving one constant from an internal header to
the public header, as part of the structured read processing
will be done in block/nbd-client.c rather than nbd/client.c.
[1]https://github.com/NetworkBlockDevice/nbd/blob/extension-structured-reply/doc/proto.md
Based on patches from Vladimir Sementsov-Ogievskiy.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20171027104037.8319-4-eblake@redhat.com>
This is needed in preparation for structured reply handling,
as we will be performing the translation from NBD error to
system errno value higher in the stack at block/nbd-client.c.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20171027104037.8319-3-eblake@redhat.com>
NBD errors were originally sent over the wire based on Linux errno
values; but not all the world is Linux, and not all platforms share
the same values. Since a number isn't very easy to decipher on all
platforms, update the trace messages to include the name of NBD
errors being sent/received over the wire. Tweak the trace messages
to be at the point where we are using the NBD error, not the
translation to the host errno values.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20171027104037.8319-2-eblake@redhat.com>
Prepare indenting for the following commit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171012095319.136610-9-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Send qiov via qio_channel_writev_all instead of calling nbd_write twice
with a cork.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20171012095319.136610-8-vsementsov@virtuozzo.com>
[eblake: rebase to tweaks earlier in series]
Signed-off-by: Eric Blake <eblake@redhat.com>
Pass client and buffer (*data) parameters directly, to make the function
consistent with further structured reply sending functions.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20171012095319.136610-7-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
NBDReply structure will be upgraded in future patches to handle both
simple and structured replies and will be used only in the client
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20171012095319.136610-6-vsementsov@virtuozzo.com>
[eblake: rebase to tweaks earlier in series]
Signed-off-by: Eric Blake <eblake@redhat.com>
Use packed structure instead of pointer arithmetics.
Also, merge two redundant traces into one.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20171012095319.136610-5-vsementsov@virtuozzo.com>
[eblake: tweak and mention impact on traces, fix errp usage]
Signed-off-by: Eric Blake <eblake@redhat.com>
To be consistent when their _structured_ analogs will be introduced.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171012095319.136610-4-vsementsov@virtuozzo.com>
[eblake: also tweak trace message contents]
Signed-off-by: Eric Blake <eblake@redhat.com>
Rather than open-coding our own read/write-all functions, we
can make use of the recently-added qio code. It slightly
changes the error message in one of the iotests.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170905191114.5959-4-eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Fix nbd_send_request to return int, as it returns a return value
of nbd_write (which is int), and the only user of nbd_send_request's
return value (nbd_co_send_request) consider it as int too.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170804151440.320927-5-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Refactor nbd_receive_reply to return 1 on success, 0 on eof, when no
data was read and <0 for other cases, because returned size of read
data is not actually used.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170804151440.320927-4-vsementsov@virtuozzo.com>
[eblake: tweak function comments]
Signed-off-by: Eric Blake <eblake@redhat.com>
Refactor nbd_read_eof to return 1 on success, 0 on eof, when no
data was read and <0 for other cases, because returned size of
read data is not actually used.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170804151440.320927-3-vsementsov@virtuozzo.com>
[eblake: tweak function comments, rebase to test 083 enhancements]
Signed-off-by: Eric Blake <eblake@redhat.com>
Do not send NBD_OPT_ABORT to the broken server. After sending
NBD_REP_ACK on NBD_OPT_GO server is most probably in transmission
phase, when option sending is finished.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170804151440.320927-2-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The "inactive" state of BDS affects whether the permissions can be
granted, we must call bdrv_invalidate_cache before bdrv_set_perm to
support "-incoming defer" case.
Reported-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170815130740.31229-3-famz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
NBD_CMD_DISC is a disconnect request, not a data discard request.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170811015749.20365-1-eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The only exception are groups of numers separated by symbols
'.', ' ', ':', '/', like 'ab.09.7d'.
This patch is made by the following:
> find . -name trace-events | xargs python script.py
where script.py is the following python script:
=========================
#!/usr/bin/env python
import sys
import re
import fileinput
rhex = '%[-+ *.0-9]*(?:[hljztL]|ll|hh)?(?:x|X|"\s*PRI[xX][^"]*"?)'
rgroup = re.compile('((?:' + rhex + '[.:/ ])+' + rhex + ')')
rbad = re.compile('(?<!0x)' + rhex)
files = sys.argv[1:]
for fname in files:
for line in fileinput.input(fname, inplace=True):
arr = re.split(rgroup, line)
for i in range(0, len(arr), 2):
arr[i] = re.sub(rbad, '0x\g<0>', arr[i])
sys.stdout.write(''.join(arr))
=========================
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20170731160135.12101-5-vsementsov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
nbd/client.c:385:12: warning: Potential leak of memory pointed to by 'buf'
Reported-by: Clang Static Analyzer
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170727024224.22900-5-f4bug@amsat.org>
[introduced in commit 8ecaeae8]
Signed-off-by: Eric Blake <eblake@redhat.com>
A typo in commit 23e099c set the size of buf[] used in response
to NBD_OPT_EXPORT_NAME according to the length needed for old-style
negotiation (4 bytes of flag information) instead of the intended
2 bytes used in new style. If the client doesn't enable
NBD_FLAG_C_NO_ZEROES, then the server sends two bytes too many,
and is then out of sync in response to the client's next command
(the bug is masked when modern qemu is the client, since we enable
the no zeroes flag).
While touching this code, add some more defines to nbd_internal.h
rather than having quite so many magic numbers in the .c; also,
use "" initialization rather than memset(), and tweak the oldstyle
negotiation to better match the spec description of the layout
(since the spec is big-endian, skipping two bytes as 0 followed by
writing a 2-byte flag is the same as writing a zero-extended 4-byte
flag), to make it a bit easier to follow compared to the spec.
[checkpatch.pl has some false positives in the comments]
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170717192635.17880-3-eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Make the client trace slightly more legible by including the name
of the command being sent.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-Id: <20170717192635.17880-2-eblake@redhat.com>
Commit 8ecaeae8 changed the way the client requests an NBD export,
and in the process also changed the resulting error message when
the export is not present, breaking a couple of iotests. The error
message is now directly given by the server (a failed NBD_OPT_GO)
instead of implied by the client (after exhausting NBD_OPT_LIST),
but looking at the testsuite changes, it proves worthwhile to
reword the error message to be slightly less verbose (as this is
one particular error message likely to be hit by a user).
Note that the error message is now sensitive to which binary is
running the server as well as the client (since the expected
output is replaying a message received from the server - for that
matter, it depends on a server new enough to understand NBD_OPT_GO);
in general iotests are run on client and server from the same source
code base so the default setup will pass; but if it proves
problematic for people overriding QEMU_PROG, QEMU_IMG_PROG,
QEMU_IO_PROG, and QEMU_NBD_PROG to point across multiple builds for
cross-version integration testing, we may have to later tweak or
sanitize the output somehow.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170717142310.17048-1-eblake@redhat.com>
Tested-by: John Snow <jsnow@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
The upstream NBD Protocol has defined a new extension to allow
the server to advertise block sizes to the client, as well as
a way for the client to inform the server whether it intends to
obey block sizes.
When using the block layer as the client, we will obey block
sizes; but when used as 'qemu-nbd -c' to hand off to the
kernel nbd module as the client, we are still waiting for the
kernel to implement a way for us to learn if it will honor
block sizes (perhaps by an addition to sysfs, rather than an
ioctl), as well as any way to tell the kernel what additional
block sizes to obey (NBD_SET_BLKSIZE appears to be accurate
for the minimum size, but preferred and maximum sizes would
probably be new ioctl()s), so until then, we need to make our
request for block sizes conditional.
When using ioctl(NBD_SET_BLKSIZE) to hand off to the kernel,
use the minimum block size as the sector size if it is larger
than 512, which also has the nice effect of cooperating with
(non-qemu) servers that don't do read-modify-write when
exposing a block device with 4k sectors; it might also allow
us to visit a file larger than 2T on a 32-bit kernel.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170707203049.534-10-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The upstream NBD Protocol has defined a new extension to allow
the server to advertise block sizes to the client, as well as
a way for the client to inform the server that it intends to
obey block sizes.
Thanks to a recent fix (commit df7b97ff), our real minimum
transfer size is always 1 (the block layer takes care of
read-modify-write on our behalf), but we're still more efficient
if we advertise 512 when the client supports it, as follows:
- OPT_INFO, but no NBD_INFO_BLOCK_SIZE: advertise 512, then
fail with NBD_REP_ERR_BLOCK_SIZE_REQD; client is free to try
something else since we don't disconnect
- OPT_INFO with NBD_INFO_BLOCK_SIZE: advertise 512
- OPT_GO, but no NBD_INFO_BLOCK_SIZE: advertise 1
- OPT_GO with NBD_INFO_BLOCK_SIZE: advertise 512
We can also advertise the optimum block size (presumably the
cluster size, when exporting a qcow2 file), and our absolute
maximum transfer size of 32M, to help newer clients avoid
EINVAL failures or abrupt disconnects on oversize requests.
We do not reject clients for using the older NBD_OPT_EXPORT_NAME;
we are no worse off for those clients than we used to be.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170707203049.534-9-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
NBD_OPT_EXPORT_NAME is lousy: per the NBD protocol, any failure
requires the server to close the connection rather than report an
error to us. Therefore, upstream NBD recently added NBD_OPT_GO as
the improved version of the option that does what we want [1]: it
reports sane errors on failures, and on success provides at least
as much info as NBD_OPT_EXPORT_NAME.
[1] https://github.com/NetworkBlockDevice/nbd/blob/extension-info/doc/proto.md
This is a first cut at use of the information types. Note that we
do not need to use NBD_OPT_INFO, and that use of NBD_OPT_GO means
we no longer have to use NBD_OPT_LIST to learn whether a server
requires TLS (this requires servers that gracefully handle unknown
NBD_OPT, many servers prior to qemu 2.5 were buggy, but I have patched
qemu, upstream nbd, and nbdkit in the meantime, in part because of
interoperability testing with this patch). We still fall back to
NBD_OPT_LIST when NBD_OPT_GO is not supported on the server, as it
is still one last chance for a nicer error message. Later patches
will use further info, like NBD_INFO_BLOCK_SIZE.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170707203049.534-8-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
NBD_OPT_EXPORT_NAME is lousy: per the NBD protocol, any failure
requires us to close the connection rather than report an error.
Therefore, upstream NBD recently added NBD_OPT_GO as the improved
version of the option that does what we want [1], along with
NBD_OPT_INFO that returns the same information but does not
transition to transmission phase.
[1] https://github.com/NetworkBlockDevice/nbd/blob/extension-info/doc/proto.md
This is a first cut at the information types, and only passes the
same information already available through NBD_OPT_LIST and
NBD_OPT_EXPORT_NAME; items like NBD_INFO_BLOCK_SIZE (and thus any
use of NBD_REP_ERR_BLOCK_SIZE_REQD) are intentionally left for
later patches.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170707203049.534-7-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reply directly in nbd_negotiate_handle_export_name(), rather than
waiting until nbd_negotiate_options() completes. This will make it
easier to implement NBD_OPT_GO. Pass additional parameters around,
rather than stashing things inside NBDClient.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170707203049.534-6-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Simplify the tracing of client flags in the server, and return -EINVAL
instead of -EIO if we successfully read but don't like those flags.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170707203049.534-5-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The NBD protocol has several constants defined in various extensions
that we are about to implement. Expose them to the code, along with
an easy way to map various constants to strings during diagnostic
messages.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170707203049.534-4-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We really don't care if our spec-compliant reply to NBD_OPT_ABORT
was received, so shave off some lines of code by not even tracing it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170707203049.534-3-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The NBD Protocol is introducing some additional information
about exports, such as minimum request size and alignment, as
well as an advertised maximum request size. It will be easier
to feed this information back to the block layer if we gather
all the information into a struct, rather than adding yet more
pointer parameters during negotiation.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170707203049.534-2-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let NBD use the trace mechanisms already present in qemu. Now you can
use the -trace optino of qemu, or the -T/--trace option of qemu-img,
qemu-io, and qemu-nbd, to select nbd traces. For qemu, the QMP commands
trace-event-{get,set}-state can also toggle tracing on the fly.
Example:
qemu-nbd --trace 'nbd_*' <image file> # enables all nbd traces
Recompilation with CFLAGS=-DDEBUG_NBD is no more needed, furthermore,
DEBUG_NBD macro is removed from the code.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170707152918.23086-11-vsementsov@virtuozzo.com>
[eblake: minor tweaks to a couple of traces]
Signed-off-by: Eric Blake <eblake@redhat.com>
Reorganize traces: move, reword, add information, drop extra ones.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170707152918.23086-10-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Rename 'clientflags' to just 'option'. This variable has nothing to do
with flags, but is a single integer representing the option requested
by the client.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170707152918.23086-9-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Fix wrong order of TRACE arguments.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170707152918.23086-8-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We are going to switch from TRACE macro to trace points,
this TRACE complicates things, this patch simplifies it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170707152918.23086-7-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Error is propagated to the caller, TRACE is not needed.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170707152918.23086-6-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170707152918.23086-5-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Move to modern errp scheme from just LOGging errors.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170707152918.23086-4-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Combine two successive "if (oldStyle) {...} else {...}" into one.
Block "if (client->tlscreds)" under "if (oldStyle)" is unreachable,
as we have "oldStyle = client->exp != NULL && !client->tlscreds;".
So, delete this block.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170707152918.23086-3-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Separate the case when a client sends NBD_OPT_ABORT from all other
errors. It will be needed for the following patch, where errors will be
reported.
This particular case is not actually an error - it honestly follows the
NBD protocol. Therefore it should not be reported like an error.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170707152918.23086-2-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
- do not use 'goto error_reply' outside a switch to jump into the
middle of the switch's default case label
- reduce code duplication
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170602150150.258222-13-vsementsov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
