Since we already forbid other nbd-server commands when not
in the right state, it is unlikely that any caller was relying
on a second stop to behave as a silent no-op. Update iotest
223 to show the improved behavior.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190111194720.15671-3-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Testing success paths is important, but it's also nice to highlight
expected failure handling, to show that we don't crash, and so that
upcoming tests that change behavior can demonstrate the resulting
effects on error paths.
Add the following errors:
Attempting to export without a running server
Attempting to start a second server
Attempting to export a bad node name
Attempting to export a name that is already exported
Attempting to export an enabled bitmap
Attempting to remove an already removed export
Attempting to quit server a second time
All of these properly complain except for a second server-stop,
which will be fixed next.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190111194720.15671-2-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
New interface, new smoke test.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181221093529.23855-12-jsnow@redhat.com>
[eblake: fix last-minute change to echo text]
Signed-off-by: Eric Blake <eblake@redhat.com>
If iotests have lines exceeding >998 characters long, git doesn't
want to send it plaintext to the list. We can solve this by allowing
the iotests to use pretty printed QMP output that we can match against
instead.
As a bonus, it's much nicer for human eyes too.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20181221093529.23855-11-jsnow@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
As laid out in the previous commit's message:
```
Several places in iotests deal with serializing objects into JSON
strings, but to add pretty-printing it seems desirable to localize
all of those cases.
log() seems like a good candidate for that centralized behavior.
log() can already serialize json objects, but when it does so,
it assumes filters=[] operates on QMP objects, not strings.
qmp_log currently operates by dumping outgoing and incoming QMP
objects into strings and filtering them assuming that filters=[]
are string filters.
```
Therefore:
Change qmp_log to treat filters as if they're always qmp object filters,
then change the logging call to rely on log()'s ability to serialize QMP
objects, so we're not duplicating that effort.
Add a qmp version of filter_testfiles and adjust the only caller using
it for qmp_log to use the qmp version.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20181221093529.23855-10-jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Several places in iotests deal with serializing objects into JSON
strings, but to add pretty-printing it seems desirable to localize
all of those cases.
log() seems like a good candidate for that centralized behavior.
log() can already serialize json objects, but when it does so,
it assumes filters=[] operates on QMP objects, not strings.
qmp_log currently operates by dumping outgoing and incoming QMP
objects into strings and filtering them assuming that filters=[]
are string filters.
To have qmp_log use log's serialization, qmp_log will need to
accept only qmp filters, not text filters.
However, only a single caller of qmp_log actually requires any
filters at all. I remove the default filter and add it explicitly
to the caller in preparation for refactoring qmp_log to use rich
filters instead.
test 206 is amended to name the filter explicitly and the default
is removed.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20181221093529.23855-9-jsnow@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Python before 3.6 does not sort dictionaries (including kwargs).
Therefore, printing QMP objects involves sorting the keys to have
a predictable ordering in the iotests output. This means that
iotests output will sometimes show arguments in an order not
specified by the test author.
Presently, we accomplish this by using json.dumps' sort_keys argument,
where we only serialize the arguments dictionary, but not the command.
However, if we want to pretty-print QMP objects being sent to the
QEMU process, we need to build the entire command before logging it.
Ordinarily, this would then involve "arguments" being sorted above
"execute", which would necessitate a rather ugly and harder-to-read
change to many iotests outputs.
To facilitate pretty-printing AND maintaining predictable output AND
having "arguments" sort after "execute", add a custom sort function
that takes a dictionary and recursively builds an OrderedDict that
maintains the specific key order we wish to see in iotests output.
The qmp_log function uses this to build a QMP object that keeps
"execute" above "arguments", but sorts all keys and keys in any
subdicts in "arguments" lexicographically to maintain consistent
iotests output, with no incompatible changes to any current test.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20181221093529.23855-8-jsnow@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
To mimic the common filter of the same name, but for the python tests.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20181221093529.23855-7-jsnow@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Instead of using os.environ[], use .get with a default of empty string
to match the setup in check to allow us to import the iotests module
(for debugging, say) without needing a crafted environment just to
import the module.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20181221093529.23855-6-jsnow@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The 'x' prefix was added because I was uncertain of the direction we'd
take for the libvirt API. With the general approach solidified, I feel
comfortable committing to this API for 4.0.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20181221093529.23855-5-jsnow@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This changes output from:
$ qemu-nbd nosuch
Failed to blk_new_open 'nosuch': Could not open 'nosuch': No such file or directory
to something more consistent with qemu-img and qemu:
$ qemu-nbd nosuch
qemu-nbd: Failed to blk_new_open 'nosuch': Could not open 'nosuch': No such file or directory
Update the lone affected test to match. (Hmm - is it sad that we don't
do much testing of expected failures?)
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20181215135324.152629-2-eblake@redhat.com>
Reduce extra noise of nbd-client, change 083 correspondingly.
In various commits (be41c100 in 2.10, f140e300 in 2.11, 78a33ab
in 2.12), we added spots where qemu as an NBD client would report
problems communicating with the server to stderr, because there
was no where else to send the error to. However, this is racy,
particularly since the most common source of these errors is when
either the client or the server abruptly hangs up, leaving one
coroutine to report the error only if it wins (or loses) the
race in attempting the read from the server before another
thread completes its cleanup of a protocol error that caused the
disconnect in the first place. The race is also apparent in the
fact that differences in the flush behavior of the server can
alter the frequency of encountering the race in the client (see
commit 6d39db96).
Rather than polluting stderr, it's better to just trace these
situations, for use by developers debugging a flaky connection,
particularly since the real error that either triggers the abrupt
disconnection in the first place, or that results from the EIO
when a request can't receive a reply, DOES make it back to the
user in the normal Error propagation channels.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20181102151152.288399-4-vsementsov@virtuozzo.com>
[eblake: drop depedence on error hint, enhance commit message]
Signed-off-by: Eric Blake <eblake@redhat.com>
It is interesting to know whether the shutdown cause was 'quit' or
'reset', especially when using "--no-reboot". In that case, a management
layer can now determine if the guest wanted a reboot or shutdown, and
can act accordingly.
Changes the output of the reason in the iotests from 'host-qmp' to
'host-qmp-quit'. This does not break compatibility because
the field was introduced in the same version.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Message-Id: <20181205110131.23049-4-d.csapak@proxmox.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This makes it possible to determine what the exact reason was for
a RESET or a SHUTDOWN. A management layer might need the specific reason
of those events to determine which cleanups or other actions it needs to do.
This patch also updates the iotests to the new expected output that includes
the reason.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Message-Id: <20181205110131.23049-3-d.csapak@proxmox.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
- qcow2: Decompression worker threads
- dmg: lzfse compression support
- file-posix: Simplify delegation to worker thread
- Don't pass flags to bdrv_reopen_queue()
- iotests: make 235 work on s390 (and others)
-----BEGIN PGP SIGNATURE-----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=XKq9
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- qcow2: Decompression worker threads
- dmg: lzfse compression support
- file-posix: Simplify delegation to worker thread
- Don't pass flags to bdrv_reopen_queue()
- iotests: make 235 work on s390 (and others)
# gpg: Signature made Fri 14 Dec 2018 10:55:09 GMT
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (42 commits)
block/mirror: add missing coroutine_fn annotations
iotests: make 235 work on s390 (and others)
block: Assert that flags are up-to-date in bdrv_reopen_prepare()
block: Remove assertions from update_flags_from_options()
block: Stop passing flags to bdrv_reopen_queue_child()
block: Remove flags parameter from bdrv_reopen_queue()
block: Clean up reopen_backing_file() in block/replication.c
qemu-io: Put flag changes in the options QDict in reopen_f()
block: Drop bdrv_reopen()
block: Use bdrv_reopen_set_read_only() in the mirror driver
block: Use bdrv_reopen_set_read_only() in external_snapshot_commit()
block: Use bdrv_reopen_set_read_only() in qmp_change_backing_file()
block: Use bdrv_reopen_set_read_only() in stream_start/complete()
block: Use bdrv_reopen_set_read_only() in bdrv_commit()
block: Use bdrv_reopen_set_read_only() in commit_start/complete()
block: Use bdrv_reopen_set_read_only() in bdrv_backing_update_filename()
block: Add bdrv_reopen_set_read_only()
file-posix: Avoid aio_worker() for QEMU_AIO_IOCTL
file-posix: Switch to .bdrv_co_ioctl
file-posix: Remove paio_submit_co()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
"-machine pc" will not work all architectures. Lets fall back to the
default machine by not specifying it.
In addition we also need to specify -no-shutdown on s390 as qemu will
exit otherwise.
Cc: qemu-stable@nongnu.org
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This function takes four options (cache.direct, cache.no-flush,
read-only and auto-read-only) from a QemuOpts object and updates the
flags accordingly.
If any of those options is not set (because it was missing from the
original QDict or because it had an invalid value) then the function
aborts with a failed assertion:
$ qemu-io -c 'reopen -o read-only=foo' hd.qcow2
block.c:1126: update_flags_from_options: Assertion `qemu_opt_find(opts, BDRV_OPT_CACHE_DIRECT)' failed.
Aborted
This assertion is unnecessary, and it forces any caller of
bdrv_reopen() to pass all the aforementioned four options. This may
have made sense in order to remove ambiguity when bdrv_reopen() was
taking both flags and options, but that's not the case anymore.
It's also unnecessary if we want to validate the option values,
because bdrv_reopen_prepare() already takes care of that, as we can
see if we remove the assertions:
$ qemu-io -c 'reopen -o read-only=foo' hd.qcow2
Parameter 'read-only' expects 'on' or 'off'
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When reopen_f() puts a block device in the reopen queue, some of the
new options are passed using a QDict, but others ("read-only" and the
cache options) are passed as flags.
This patch puts those flags in the QDict. This way the flags parameter
becomes redundant and we'll be able to get rid of it in a subsequent
patch.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This test is broken without previous commit fixing dead-lock in mirror.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Acked-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Check that block node activation and inactivation works with a block
graph that is built with individually created nodes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
The previous patch fixed the inherits_from pointer after block-stream,
and this one does the same for block-commit.
When block-commit finishes and the 'top' node is not the topmost one
from the backing chain then all nodes above 'base' up to and including
'top' are removed from the chain.
The bdrv_drop_intermediate() call converts a chain like this one:
base <- intermediate <- top <- active
into this one:
base <- active
In a simple scenario each backing file from the first chain has the
inherits_from attribute pointing to its parent. This means that
reopening 'active' will recursively reopen all its children, whose
options can be changed in the process.
However after the 'block-commit' call base.inherits_from is NULL and
the chain is broken, so 'base' does not inherit from 'active' and will
not be reopened automatically:
$ qemu-img create -f qcow2 hd0.qcow2 1M
$ qemu-img create -f qcow2 -b hd0.qcow2 hd1.qcow2
$ qemu-img create -f qcow2 -b hd1.qcow2 hd2.qcow2
$ $QEMU -drive if=none,file=hd2.qcow2
{ 'execute': 'block-commit',
'arguments': {
'device': 'none0',
'top': 'hd1.qcow2' } }
{ 'execute': 'human-monitor-command',
'arguments': {
'command-line':
'qemu-io none0 "reopen -o backing.l2-cache-size=2M"' } }
{ "return": "Cannot change the option 'backing.l2-cache-size'\r\n"}
This patch updates base.inherits_from in this scenario, and adds a
test case.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When a BlockDriverState's child is opened (be it a backing file, the
protocol layer, or any other) inherits_from is set to point to the
parent node. Children opened separately and then attached to a parent
don't have this pointer set.
bdrv_reopen_queue_child() uses this to determine whether a node's
children must also be reopened inheriting the options from the parent
or not. If inherits_from points to the parent then the child is
reopened and its options can be changed, like in this example:
$ qemu-img create -f qcow2 hd0.qcow2 1M
$ qemu-img create -f qcow2 hd1.qcow2 1M
$ $QEMU -drive if=none,node-name=hd0,file=hd0.qcow2,\
backing.driver=qcow2,backing.file.filename=hd1.qcow2
(qemu) qemu-io hd0 "reopen -o backing.l2-cache-size=2M"
If the child does not inherit from the parent then it does not get
reopened and its options cannot be changed:
$ $QEMU -drive if=none,node-name=hd1,file=hd1.qcow2
-drive if=none,node-name=hd0,file=hd0.qcow2,backing=hd1
(qemu) qemu-io hd0 "reopen -o backing.l2-cache-size=2M"
Cannot change the option 'backing.l2-cache-size'
If a disk image has a chain of backing files then all of them are also
connected through their inherits_from pointers (i.e. it's possible to
walk the chain in reverse order from base to top).
However this is broken if the intermediate nodes are removed using
e.g. block-stream because the inherits_from pointer from the base node
becomes NULL:
$ qemu-img create -f qcow2 hd0.qcow2 1M
$ qemu-img create -f qcow2 -b hd0.qcow2 hd1.qcow2
$ qemu-img create -f qcow2 -b hd1.qcow2 hd2.qcow2
$ $QEMU -drive if=none,file=hd2.qcow2
(qemu) qemu-io none0 "reopen -o backing.l2-cache-size=2M"
(qemu) block_stream none0 0 hd0.qcow2
(qemu) qemu-io none0 "reopen -o backing.l2-cache-size=2M"
Cannot change the option 'backing.l2-cache-size'
This patch updates the inherits_from pointer if the intermediate nodes
of a backing chain are removed using bdrv_set_backing_hd(), and adds a
test case for this scenario.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Testing granularity at the same size as the cluster isn't quite
as fun as what happens when it is larger or smaller. This
enhancement also shows that qemu's nbd server can serve the
same disk over multiple exports simultaneously.
Signed-off-by: Eric Blake <eblake@redhat.com>
Tested-by: John Snow <jsnow@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The first qemu-io command must honour the $IMGFMT that is set rather
than hardcoding qcow2. The qemu-nbd commands should also set $IMGFMT
to avoid the insecure format probe warning.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The use of TLS while building qemu is optional. While the
'certtool' binary should be available on every platform that
supports building against TLS, that does not imply that the
developer has installed it. Make the test gracefully skip
in that case.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
TestCase.assertEquals() is deprecated since Python 2.7. Recent Python
versions print a warning when the function is called, which makes test
cases fail.
Replace it with the preferred spelling assertEqual().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
time.clock() is deprecated since Python 3.3. Current Python versions
warn that the function will be removed in Python 3.8, and those warnings
make the test case 118 fail.
Replace it with the Timeout mechanism that is compatible with both
Python 2 and 3, and makes the code even a little nicer.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Bash allows functions to be declared with or without the leading
keyword 'function'; but including the keyword does not comply with
POSIX syntax, and is confusing to ksh users where the use of the
keyword changes the scoping rules for functions. Stick to the
POSIX form through iotests.
Done mechanically with:
sed -i 's/^function //' $(git ls-files tests/qemu-iotests)
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181116215002.2124581-1-eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Enhance test 233 to also perform I/O beyond the initial handshake.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181118022403.2211483-1-eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add tests that validate it is possible to connect to an NBD server
running TLS mode. Also test mis-matched TLS vs non-TLS connections
correctly fail.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20181116155325.22428-7-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
[eblake: rebase to iotests shell cleanups, use ss instead of socat for
port probing, sanitize port number in expected output]
Signed-off-by: Eric Blake <eblake@redhat.com>
Add helpers to common.tls for creating TLS certificates for a CA,
server and client.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20181116155325.22428-6-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: spelling and quoting touchups]
Signed-off-by: Eric Blake <eblake@redhat.com>
If the qemu-nbd UNIX socket has not shown up, the tests will sleep a bit
and then check again repeatedly for up to 30 seconds. This is pointless
if the qemu-nbd process has quit due to an error, so check whether the
pid is still alive before waiting and retrying.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20181116155325.22428-5-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The helpers for starting/stopping qemu-nbd in 058 will be useful in
other test cases, so move them into a common.nbd file.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20181116155325.22428-4-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: fix shell quoting]
Signed-off-by: Eric Blake <eblake@redhat.com>
Various shell files contain a mix between obsolete ``
and modern $(); It would be nice to convert to using
$() everywhere. For now, just do the qemu-iotests directory.
Cc: kwolf@redhat.com
Cc: mreitz@redhat.com
Cc: eblake@redhat.com
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Message-Id: <20181024094051.4470-4-maozhongyi@cmss.chinamobile.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: tweak commit message]
Signed-off-by: Eric Blake <eblake@redhat.com>
POSIX requires $PWD to be reliable, and we expect all
shells used by qemu scripts to be relatively close to
POSIX. Thus, it is smarter to avoid forking the pwd
executable for something that is already available in
the environment.
So replace it with the following:
sed -i 's/\(`pwd`\|\$(pwd)\)/$PWD/g' $(git grep -l pwd)
Then delete a pointless line assigning PWD to itself.
Cc: kwolf@redhat.com
Cc: mreitz@redhat.com
Cc: eblake@redhat.com
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Message-Id: <20181024094051.4470-2-maozhongyi@cmss.chinamobile.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: touch up commit message, reorder series, tweak a couple more files]
Signed-off-by: Eric Blake <eblake@redhat.com>
Running
git grep '\$here' tests/qemu-iotests
has 0 hits, which means we are setting a variable that has
no use. It appears that commit e8f8624d removed the last
use. So execute the following cmd to remove all of
the 'here=...' lines as dead code.
sed -i '/^here=/d' $(git grep -l '^here=' tests/qemu-iotests)
Cc: kwolf@redhat.com
Cc: mreitz@redhat.com
Cc: eblake@redhat.com
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Message-Id: <20181024094051.4470-3-maozhongyi@cmss.chinamobile.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: touch up commit message, reorder series, rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
If you have a capable file system (tmpfs is good, ext4 not so much;
run ./check with TEST_DIR pointing to a good location so as not
to skip the test), it's actually possible to create a qcow2 file
that expands to a sparse 512T image with just over 38M of content.
The test is not the world's fastest (qemu crawling through 256M
bits of refcount table to find the next cluster to allocate takes
several seconds, as does qemu-img check reporting millions of
leaked clusters); but it DOES catch the problem that the previous
patch just fixed where writing a compressed cluster to a full
image ended up overwriting the wrong cluster.
Suggested-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds some whitespace into the option help (including indentation)
and puts angle brackets around the type names. Furthermore, the list
name is no longer printed as part of every line, but only once in
advance, and only if the caller did not print a caption already.
This patch also restores the description alignment we had before commit
9cbef9d68e, just at 24 instead of 16 characters like we used to.
This increase is because now we have the type and two spaces of
indentation before the description, and with a usual type name length of
three chracters, this sums up to eight additional characters -- which
means that we now need 24 characters to get the same amount of padding
for most options. Also, 24 is a third of 80, which makes it kind of a
round number in terminal terms.
Finally, this patch amends the reference output of iotest 082 to match
the changes (and thus makes it pass again).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch tests that you can add and remove drives from a Quorum
using the x-blockdev-change command.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
While testing the Python 3 changes which touch the 083 test, I noticed
that it would fail with qcow2. Expanding the testing, I noticed it
had nothing to do with the Python 3 changes, and in fact, it would not
pass on anything but raw:
raw: pass
bochs: not generic
cloop: not generic
parallels: fail
qcow: fail
qcow2: fail
qed: fail
vdi: fail
vhdx: fail
vmdk: fail
vpc: fail
luks: fail
The errors are a mixture I/O and "image not in xxx format", such as:
=== Check disconnect before data ===
Unexpected end-of-file before all bytes were read
-read failed: Input/output error
+can't open device nbd+tcp://127.0.0.1:PORT/foo: Could not open 'nbd://127.0.0.1:PORT/foo': Input/output error
=== Check disconnect after data ===
-read 512/512 bytes at offset 0
-512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+can't open device nbd+tcp://127.0.0.1:PORT/foo: Image not in qcow format
I'm not aware if there's a quick fix, so, for the time being, it looks
like the honest approach is to make the test known to work on raw
only.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When dumping an object into the log, there are differences between
Python 2 and 3. First, unicode strings are prefixed by 'u' in Python 2
(they are no longer in 3, because unicode strings are the default
there). Second, the order of keys in dicts may differ. Third,
especially long numbers are longs in Python 2 and thus get an 'L'
suffix, which does not happen in Python 3.
We can get around all of these differences by dumping objects (lists and
dicts) in a language-independent format, namely JSON. The JSON
generator even allows emitting dicts with their keys sorted
alphabetically.
This changes the output of all tests that use these logging functions
(dict keys are ordered now, strings in dicts are now enclosed in double
quotes instead of single quotes, the 'L' suffix of large integers is
dropped, and "true" and "false" are now in lower case).
The quote change necessitates a small change to a filter used in test
207.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-10-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
There are two imports that need to be modified when running the iotests
under Python 3: One is StringIO, which no longer exists; instead, the
StringIO class comes from the io module, so import it from there (and
use the BytesIO class for Python 2). The other is the ConfigParser,
which has just been renamed to configparser.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-9-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
iotest 169 uses the 'new' module to add methods to a class. This module
no longer exists in Python 3. Instead, we can use a lambda. Best of
all, this works in 2.7 just as well.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-8-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Python 3.4 introduced the inheritable attribute for FDs. At the same
time, it changed the default so that all FDs are not inheritable by
default, that only inheritable FDs are inherited to subprocesses, and
only if close_fds is explicitly set to False.
Adhere to this by setting close_fds to False when working with
subprocesses that may want to inherit FDs, and by trying to
set_inheritable() on FDs that we do want to bequeath to them.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-7-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
In Python 3, several functions now return iterators instead of lists.
This includes range(), items(), map(), and filter(). This means that if
we really want a list, we have to wrap those instances with list(). But
then again, the two instances where this is the case for map() and
filter(), there are shorter expressions which work without either
function.
On the other hand, sometimes we do just want an iterator, in which case
we have sometimes used xrange() and iteritems() which no longer exist in
Python 3. Just change these calls to be range() and items(), works in
both Python 2 and 3, and is really what we want in 3 (which is what
matters). But because it is so simple to do (and to find and remove
once we completely switch to Python 3), make range() be an alias for
xrange() in the two affected tests (044 and 163).
In one instance, we only wanted the first instance of the result of a
filter() call. Instead of using next(filter()) which would work only in
Python 3, or list(filter())[0] which would work everywhere but is a bit
weird, this instance is changed to use a generator expression with a
next() wrapped around, which works both in 2.7 and 3.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-6-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
In Python 3, / is always a floating-point division. We usually do not
want this, and as Python 2.7 understands // as well, change all integer
divisions to use that.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-5-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Eric Blake
John Snow
Vladimir Sementsov-Ogievskiy
Dominik Csapak
Peter Maydell
Christian Borntraeger
Alberto Garcia
Markus Armbruster
Kevin Wolf
Daniel P. Berrangé
Mao Zhongyi
Max Reitz
Cleber Rosa