Commit Graph

12 Commits

Author SHA1 Message Date
Peter Maydell c6eacb1ac0 hw/vfio: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-22-git-send-email-peter.maydell@linaro.org
2016-01-29 15:07:24 +00:00
Markus Armbruster bdd81addf4 vfio: Use g_new() & friends where that makes obvious sense
g_new(T, n) is neater than g_malloc(sizeof(T) * n).  It's also safer,
for two reasons.  One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.

This commit only touches allocations with size arguments of the form
sizeof(T).  Same Coccinelle semantic patch as in commit b45c03f.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-11-10 12:11:08 -07:00
Eric Auger a5b39cd3f6 hw/vfio/platform: do not set resamplefd for edge-sensitive IRQS
In irqfd mode, current code attempts to set a resamplefd whatever
the type of the IRQ. For an edge-sensitive IRQ this attempt fails
and as a consequence, the whole irqfd setup fails and we fall back
to the slow mode. This patch bypasses the resamplefd setting for
non level-sentive IRQs.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-10-05 12:30:12 -06:00
Eric Auger a22313deca hw/vfio/platform: change interrupt/unmask fields into pointer
unmask EventNotifier might not be initialized in case of edge
sensitive irq. Using EventNotifier pointers make life simpler to
handle the edge-sensitive irqfd setup.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-10-05 12:30:12 -06:00
Eric Auger 58892b447f hw/vfio/platform: irqfd setup sequence update
With current implementation, eventfd VFIO signaling is first set up and
then irqfd is setup, if supported and allowed.

This start sequence causes several issues with IRQ forwarding setup
which, if supported, is transparently attempted on irqfd setup:
IRQ forwarding setup is likely to fail if the IRQ is detected as under
injection into the guest (active at irqchip level or VFIO masked).

This currently always happens because the current sequence explicitly
VFIO-masks the IRQ before setting irqfd.

Even if that masking were removed, we couldn't prevent the case where
the IRQ is under injection into the guest.

So the simpler solution is to remove this 2-step startup and directly
attempt irqfd setup. This is what this patch does.

Also in case the eventfd setup fails, there is no reason to go farther:
let's abort.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-10-05 12:30:12 -06:00
Alex Williamson 5e15d79b86 vfio: Change polarity of our no-mmap option
The default should be to allow mmap and new drivers shouldn't need to
expose an option or set it to other than the allocation default in
their initfn.  Take advantage of the experimental flag to change this
option to the correct polarity.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-09-23 13:04:44 -06:00
John Snow 594fd21102 trivial: remove trailing newline from error_report
Minor cleanup.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11 10:21:38 +03:00
Eric Auger fb5f816499 hw/vfio/platform: add irqfd support
This patch aims at optimizing IRQ handling using irqfd framework.

Instead of handling the eventfds on user-side they are handled on
kernel side using
- the KVM irqfd framework,
- the VFIO driver virqfd framework.

the virtual IRQ completion is trapped at interrupt controller
This removes the need for fast/slow path swap.

Overall this brings significant performance improvements.

Signed-off-by: Alvise Rigo <a.rigo@virtualopensystems.com>
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Vikram Sethi <vikrams@codeaurora.org>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-07-06 12:15:14 -06:00
Leon Alrae e207527751 vfio: fix build error on CentOS 5.7
Include linux/vfio.h after sys/ioctl.h, just like in hw/vfio/common.c.

Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Message-id: 1434544500-22405-1-git-send-email-leon.alrae@imgtec.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-18 10:35:59 +01:00
Eric Auger 0b70743d4f hw/vfio/platform: replace g_malloc0_n by g_new0
g_malloc0_n() is introduced since glib-2.24 while QEMU currently
requires glib-2.22. This may cause a link error on some distributions.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-11 14:22:57 +01:00
Eric Auger 38559979bf hw/vfio/platform: add irq assignment
This patch adds the code requested to assign interrupts to
a guest. The interrupts are mediated through user handled
eventfds only.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Vikram Sethi <vikrams@codeaurora.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-06-08 09:25:26 -06:00
Eric Auger 0ea2730bef hw/vfio/platform: vfio-platform skeleton
Minimal VFIO platform implementation supporting register space
user mapping but not IRQ assignment.

Signed-off-by: Kim Phillips <kim.phillips@linaro.org>
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Vikram Sethi <vikrams@codeaurora.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-06-08 09:25:25 -06:00