Commit Graph

40 Commits

Author SHA1 Message Date
Markus Armbruster 7aa9c811ca ide: Reject readonly drives unless CD-ROM
drive_init() doesn't permit option readonly for if=ide, but that's
worthless: we get it via if=none and -device.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-06 17:05:50 +02:00
Markus Armbruster c4d74df726 ide: Make ide_init_drive() return success
It still always succeeds.  The next commits will add failures.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-06 17:05:49 +02:00
Markus Armbruster cd8722bb22 ide: Replace IDEState members is_cdrom, is_cf by drive_kind
The two aren't independent variables.  Make that obvious.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-06 17:05:49 +02:00
Markus Armbruster 7d0d69509a block: Fix virtual media change for if=none
BlockDriverState member removable controls whether virtual media
change (monitor commands change, eject) is allowed.  It is set when
the "type hint" is BDRV_TYPE_CDROM or BDRV_TYPE_FLOPPY.

The type hint is only set by drive_init().  It sets BDRV_TYPE_FLOPPY
for if=floppy.  It sets BDRV_TYPE_CDROM for media=cdrom and if=ide,
scsi, xen, or none.

if=ide and if=scsi work, because the type hint makes it a CD-ROM.
if=xen likewise, I think.

For the same reason, if=none works when it's used by ide-drive or
scsi-disk.  For other guest devices, there are problems:

* fdc: you can't change virtual media

    $ qemu [...] -drive if=none,id=foo,... -global isa-fdc.driveA=foo
    QEMU 0.12.50 monitor - type 'help' for more information
    (qemu) eject foo
    Device 'foo' is not removable

  unless you add media=cdrom, but that makes it readonly.

* virtio: if you add media=cdrom, you can change virtual media.  If
  you eject, the guest gets I/O errors.  If you change, the guest sees
  the drive's contents suddenly change.

* scsi-generic: if you add media=cdrom, you can change virtual media.
  I didn't test what that does to the guest or the physical device,
  but it can't be pretty.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-02 13:18:02 +02:00
Markus Armbruster f8b6cc0070 qdev: Decouple qdev_prop_drive from DriveInfo
Make the property point to BlockDriverState, cutting out the DriveInfo
middleman.  This prepares the ground for block devices that don't have
a DriveInfo.

Currently all user-defined ones have a DriveInfo, because the only way
to define one is -drive & friends (they go through drive_init()).
DriveInfo is closely tied to -drive, and like -drive, it mixes
information about host and guest part of the block device.  I'm
working towards a new way to define block devices, with clean
host/guest separation, and I need to get DriveInfo out of the way for
that.

Fortunately, the device models are perfectly happy with
BlockDriverState, except for two places: ide_drive_initfn() and
scsi_disk_initfn() need to check the DriveInfo for a serial number set
with legacy -drive serial=...  Use drive_get_by_blockdev() there.

Device model code should now use DriveInfo only when explicitly
dealing with drives defined the old way, i.e. without -device.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-02 13:18:02 +02:00
Markus Armbruster abd7f68d08 block: Move error actions from DriveInfo to BlockDriverState
That's where they belong semantically (block device host part), even
though the actions are actually executed by guest device code.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-06-15 09:41:59 +02:00
Markus Armbruster 666daa6823 blockdev: Collect block device code in new blockdev.c
Anything that moves hundreds of lines out of vl.c can't be all bad.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-06-04 15:20:47 +02:00
Markus Armbruster 6ced55a57d ide: Turn drive serial into a qdev property ide-drive.serial
It needs to be a qdev property, because it belongs to the drive's
guest part.

Bonus: info qtree now shows the serial number.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-06-04 11:43:39 +02:00
Markus Armbruster 57234ee40d ide: Split non-qdev code off ide_init2()
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-06-04 11:43:39 +02:00
Markus Armbruster 870111c8ed ide: Change ide_init_drive() to require valid dinfo argument
IDEState members drive_serial_str and version are now left empty until
an actual drive is connected.  Before, they got a default value that
was overwritten when a drive got connected.  Doesn't matter, because
they're used only while a drive is connected.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-06-04 11:43:39 +02:00
Markus Armbruster d459da0ed4 ide: Split ide_init1() off ide_init2()
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-06-04 11:43:39 +02:00
Markus Armbruster 57dac7ef8a ide: Remove redundant IDEState member conf
Commit 428c149b added IDEState member conf to let commit 0009baf1 find
the BlockConf from there.  It exists only for qdev drives, created via
ide_drive_initfn(), not for drives created via ide_init2().

But for a qdev drive, we can just as well reach its IDEDevice, which
contains the BlockConf.  Do that, and revert the parts of commit
428c149b that add IDEState member conf.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-06-04 11:43:39 +02:00
Kevin Wolf 38d8dfa193 ide: Fix ide_dma_cancel
When cancelling a request, bdrv_aio_cancel may decide that it waits for
completion of a request rather than for cancellation. IDE therefore can't
abandon its DMA status before calling bdrv_aio_cancel; otherwise the callback
of a completed request would use invalid data.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-05-17 10:20:04 +02:00
Blue Swirl 117e1e8244 ide: make a table 'const'
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-14 19:32:14 +00:00
Blue Swirl 6450a334c4 Fix build
Actually some systems don't define PAGE_SIZE. Fixes build breakage
by f7736b91c4.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-27 06:58:53 +00:00
Blue Swirl f7736b91c4 Compile ide/core only once
Make win2k install hack unconditional as it is still restricted to
x86 only in vl.c.

Replace TARGET_PAGE_SIZE and 4096 with PAGE_SIZE.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-27 06:20:53 +00:00
Luiz Capitulino 554a310bfe block: Emit BLOCK_IO_ERROR before vm_stop() call
The next commit will move the STOP event into do_vm_stop(), to
have the expected event sequence we need to emit the I/O error
event before calling vm_stop().

The expected sequence is:

{ "event": "BLOCK_IO_ERROR" [...] }
{ "event": "STOP" }

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-08 11:30:01 -06:00
Blue Swirl 4fc8d6711a Fix warning on mingw32
/src/qemu/hw/ide/core.c: In function 'ide_drive_pre_save':
/src/qemu/hw/ide/core.c:2740: warning: comparison is always false due to limited range of data type

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-02-20 08:29:17 +00:00
Marcelo Tosatti ed487bb1d6 ide save/restore pio/atapi cmd transfer fields and io buffer
Save/restore information necessary to continue in progress PIO/ATAPI CMD
transfers.

This includes the IO buffer.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19 15:33:13 -06:00
Christoph Hellwig 0009baf16c ide: add topology support
Export the physical block size in the ATA IDENTIFY command.  The
other topology values are not supported in ATA so skip them.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-10 16:53:54 -06:00
Christoph Hellwig 428c149b0b block: add topology qdev properties
Add three new qdev properties to export block topology information to
the guest.  This is needed to get optimal I/O alignment for RAID arrays
or SSDs.

The options are:

 - physical_block_size to specify the physical block size of the device,
   this is going to increase from 512 bytes to 4096 kilobytes for many
   modern storage devices
 - min_io_size to specify the minimal I/O size without performance impact,
   this is typically set to the RAID chunk size for arrays.
 - opt_io_size to specify the optimal sustained I/O size, this is
   typically the RAID stripe width for arrays.

I decided to not auto-probe these values from blkid which might easily
be possible as I don't know how to deal with these issues on migration.

Note that we specificly only set the physical_block_size, and not the
logial one which is the unit all I/O is described in.  The reason for
that is that IDE does not support increasing the logical block size and
at last for now I want to stick to one meachnisms in queue and allow
for easy switching of transports for a given backing image which would
not be possible if scsi and virtio use real 4k sectors, while ide only
uses the physical block exponent.

To make this more common for the different block drivers introduce a
new BlockConf structure holding all common block properties and a
DEFINE_BLOCK_PROPERTIES macro to add them all together, mirroring
what is done for network drivers.  Also switch over all block drivers
to use it, except for the floppy driver which has weird driveA/driveB
properties and probably won't require any advanced block options ever.

Example usage for a virtio device with 4k physical block size and
8k optimal I/O size:

  -drive file=scratch.img,media=disk,cache=none,id=scratch \
  -device virtio-blk-pci,drive=scratch,physical_block_size=4096,opt_io_size=8192

aliguori: updated patch to take into account BLOCK events

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-10 16:53:25 -06:00
Luiz Capitulino 7ad7e3c3bf ide: Generate BLOCK_IO_ERROR QMP event
Just call bdrv_mon_event() in the right place.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-10 11:57:03 -06:00
Gerd Hoffmann 47c0634030 ide: device version property
This patch adds a new property named 'ver' to ide-drive which allows to
specify the version which the virtual disk/cdrom should report to the
guest.  By default this is the qemu version (i.e. 0.12).  usage:

  -drive if=none,id=disk,file=...
  -device ide-drive,bus=ide.0,unit=0,drive=disk,ver=42

You can also switch the version for all ide drives using:

  -global ide-drive.ver=42

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-19 16:31:04 -06:00
Thadeu Lima de Souza Cascardo fe0d61231e ide: implement stub for audio control/volume read
This implements the audio control or volume read support as needed by
some systems. A Conectiva Parolin system required this to detect an IDE
device as CD-ROM, through the CDVOLREAD ioctl.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03 15:26:01 -06:00
Thadeu Lima de Souza Cascardo a70089ceeb ide: Use some already defined page macros instead of constants
Some PAGE constants were used instead of the macros we already have
defined in internal.h.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03 15:26:01 -06:00
Kevin Wolf ce4b6522f7 ide: Implement rerror option
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03 11:45:49 -06:00
Kevin Wolf f785009961 Rename DriveInfo.onerror to on_write_error
Either rename variables and functions to refer to write errors (which is what
they actually do) or introduce a parameter to distinguish reads and writes.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03 11:45:49 -06:00
Gerd Hoffmann 43b443b668 scsi: move scsi-disk.h -> scsi.h
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09 08:43:03 -06:00
Blue Swirl 4a64356397 IDE: Fix reset handling
Problem: x86 systems could not survive a few system_resets.

Clear most of IDE state when reset. Implement the missing reset handlers.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-11-07 14:13:05 +00:00
Juan Quintela b3a7d3287c ide: pre VMState functions are not needed anymore
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27 12:28:46 -05:00
Juan Quintela 37159f1305 ide: port ide_drive to vmstate
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27 12:28:45 -05:00
Juan Quintela 96c35cebfe ide: change identify_data type to uint8_t
It is used everywhere as uint8_t except in one place.  Cast to uint16_t
in that place
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27 12:28:44 -05:00
Juan Quintela 6521dc629c ide: port idebus to vmstate
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27 12:28:44 -05:00
Gerd Hoffmann 88804180fd split away drive init from ide_init2()
This allows the ide bus being initialized without drives attached
and the drives being attached and initialization later on as
separate step.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-15 19:23:30 +00:00
Juan Quintela 6ee093c907 Unexport ticks_per_sec variable. Create get_ticks_per_sec() function
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-11 10:19:52 -05:00
Christoph Hellwig b0484ae464 ide: use bdrv_aio_flush
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-11 10:19:46 -05:00
Christoph Hellwig e900a7b748 block: add enable_write_cache flag
Add a enable_write_cache flag in the block driver state, and use it to
decide if we claim to have a volatile write cache that needs controlled
flushing from the guest.  The flag is off if cache=writethrough is
defined because O_DSYNC guarantees that every write goes to stable
storage, and it is on for cache=none and cache=writeback.

Both scsi-disk and ide now use the new flage, changing from their
defaults of always off (ide) or always on (scsi-disk).

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-11 10:19:46 -05:00
Gerd Hoffmann 9cdd03a791 ide: move cmd+irq from IDEState to IDEBus.
These variables are per bus, not per drive.  Lets move them and
cleanup things a bit.  And fix the cmd migration bug for real.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-04 09:37:27 -05:00
Gerd Hoffmann f455e98cf4 ide: pass down DriveInfo instead of BlockDriverState
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-04 09:37:27 -05:00
Gerd Hoffmann 59f2a78793 ide: move code to hw/ide/
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27 20:46:50 -05:00